OID web console not showing

OID installed fine, opmnctl shows all services fine. confirmed ldapbind command works fine.
However, none of the web browser interfaces show up. eg (<host>:7001 ,7001/em). This is on RHEL 6.2
checked 7001 port is listening. (Have similar set up on Oracle Linux everything works fine)

Hi,
are you accessing EM remotely or local? if you are accessing remotely then make sure firewall is disabled on server machine and login to weblogic console and check if listen address parameter is set to 'localhost' if so, remove the value and save the changes.
Regards,
Raghav.

Similar Messages

SCOM web console not working

I have a brand new SCOM installation where SCOM has a RMS and a dedicated DB with DW installed. Everything except web console is working just fine. When I try to navigate to the web console address throught inetmgr I am able to get up the popup window for
username and password and am able to login. But if i try the URL locally on the RMS or from a remote system I am still presented with the login window, but after the credentials have been supplied, I am redirected to page not found. I am using Windows integrated
security, and just for the sake of it I have tried form based and basic authentication. I have also added all the local addresses to trusted sites but still no luck so far.
So to sum opp the problem, Web console not available from URL and FQDN but is available through IIS. Dont really know what the problem is, as there is not being registered anything neither in
Opsmgr log, application log or system log. I cant seem to find anything usefull in IIS log files either. All the servers in the solution are running 2008 R2 and the domain functional level is 2008.
Hope that some one can point me into the right direction.
Best regards
Sean.
Rao

Hi,
I would like to verify what exact error message is recevied when trying to open web console. which authentication was used when installing web console?
To troubleshooting this kind of issue, please refer to the following article:
Common Issues with the OpsMgr Web Console:
http://blogs.technet.com/b/kevinholman/archive/2010/04/07/common-issues-with-the-opsmgr-web-console.aspx
Here are more information:
http://blogs.technet.com/b/kevinholman/archive/2008/09/24/installing-the-web-console-on-a-2008-management-server-using-windows-authentication.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Thanks for the reply Vivian, I have actually seen this blog and none of the errors described here are the same as I am getting. I can try to describe the situation a bit better:
When http://Localhost:51908/default.aspx is used the web console comes up. No login is required. Everything seems to be OK.
When http://hostname:51908/default.aspx is used:I get the error: Internet Explorer cannot display the web page.
When http://hostname.domainname.local:51908/default.aspx is used: I get the error: Internet Explorer cannot display the web page.
During the initial install and following installs Windows authentication was used as the Web console was been installed on the RMS. I have now installed the IIS mgmt pack which is showing IIS as healthy both on the RMS and on the MS. I have also tried to add
the webconsole on the MS and used form based authentication. But it is also showing the same exact behaviour with the web console as that of RMS. (Had also enabled for delegation as Pete has mentioned)
I have checked the SPN and seems like they also are registered correclty. Any suggestions?
Thanks,
Best regards,
Sean
Rao

Items to display in list view web part not showing the items setup

Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other.

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint 2010 list view web part not showing conditional formatting

when I create conditional formatting in custom list is working fine & when it call through web part page (Data view web part) conditional formatting not showing. data is showing without conditional formatting.
Dinuka M.

When you use conditional formatting on some page it is writing inline CSS codes inside that page. thats why when you create a new page and add the same web part to that page, you must edit that page to apply conditional formatting to that
web part.
Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz
When you say edit the page, do you mean edit it in SharePoint Designer, or in SharePoint itself. And is it a case of just editing, then saving the page and it will apply the conditional formatting, or is there a specific property you need to edit, and if so,
what is it?

What's Happening Web Part not showing number of discussions on Community Site

Hello,
I have the What's Happening Web Part on the landing page of a community site in SharePoint 2013 Enterprise On-Premises.
The What's Happening Web Part shows number of members and discussion replies correctly, but does not show any discussions.
Any idea of where to start troubleshooting?
Thanks in advance.
Tamara Bredemus SharePoint Minion...working up to Maven

Hi Aries,
Thanks so much for your response. Here are the anwers to your questions
1. is there any customization process on this webpart? - No customizations
2. have you try to restart the community feature from the site feature option in site settings? - Not yet. Thanks for the suggestion. This is a Communities Site Collection. All of the other Community features are working. Should I ask the Farm Admin to restart
the communities feature?
3. have you tried to add another what's happening webpart at newdummy site? No I haven't. Great suggestion. Kinda embarresed that I didn't think of this. Must have been tired that day.
4. is there any steps that you did before?, because in my lab box seems the webpart works well. - I tried deleting it from the page and then adding it back, but to no avail. Will try a test site.
Thanks again for taking the time to answer. I will test and then mark your reply as an answer if all works out.
Tamara Bredemus SharePoint Minion...working up to Maven

Web Gallery not showing up in iPhoto

I've set up multiple albums through the web gallery feature and successfully synced them to my .mac account. The problem: one particular gallery shows up on the .mac account but not in iPhoto anymore so there is no way to manage it/add to it/delet it??
thanks

Jim:
Welcome to the Apple Discussions. By not showing up do you mean the gallery is no longer listed in under the Gallery section on the left of the pictures in the gallery are showing a blank window with an "!" in the middle?
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Web App not showing in Portal Preview

We are running two web apps (Wordpress sites zebraWP and zms) under our subscription at Azure. They both show under the old management portal but only one shows in the new portal. Reading through a previous question, I went to resources.azure.com and
the site (zebraWP) that is not showing shows Error: 'Resource not found'
The website otherwise appears to function normally.
I am not sure how to correct this. I have a nice example of what should be there from the other site but am reluctant to try to edit anything myself.

You can work around by using resources.azure.com to create the site with the same name (zebraWP). Make sure you put the matching location and serverFarm with the origin site. For instance, location "West US" and serverFarmName
"DefaultServcerFarm". See if it helps.
Suwatch

Flash gallery in web module not showing

When using the web module the flash galleries do not show anymore; there is simply a black screen in the center panel. The HTLM galleries show alright. The problem started a few days ago when I updated to Adobe Flash Player 11. Any suggestions?

I don't know that much about PC's, but you need to open the browser and click on the preferences, I think in the same way as you would do with a Mac and click on select javascript.
Rather than Firefox, get them to download a copy of Safari for PC from the Apple site.
Other than this I am not really sure of a solution, other than telling them to buy a Mac instead!!

Iweb web page not showing full page on the web

I have a web site that I build using iweb. I have installed intense debate for a commenting system. I have two problems. My comments are not showing up even after i approve them even though i chose to not monitor comments and when you view the page most of the comment box is missing. I have changed the height and width of the page, changed the height and width of the age layout in iweb, nothing seems to help. I have contacted there support team but they just keep saying the same things. Apparently i need to do this to get the commenting system working "looks like you don't have any JavaScript variables set. You'll need to set some postid's and URLs." That is copied directly from the email they sent me. I don't know what any of that means...And please don't say read the tutorial they offer because i cant fallow that either. This is the address of the website please look at it and tell me what you see. http://www.siobhanbyron.com/SiobhanByron/The_Outlying/TheOutlying.html

I did. I clicked the link you left and it brought me to another discussion similar to this one and then i clicked on the link that was within that conversation (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) and it brought me to here (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) here, your blog. Which is an excellent example of what i a trying to do. I will instead try to add the code that you had already placed in the prior conversation. I wasn't sure if the code you were speaking of was in your blog or in the actual conversation...ill try that

OHS 11gR1 web-page not showing up after creation, registration of webgate

Hello there,
The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
Thanks!!

Hi,
You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
mark, if this helps.
Regards,
Kishore

Forms Web - Icons not showing up

Hello,
I'm running a form on the web, and I have several iconic buttons. The Oracle Developer 2000 book says that icon image files must be in .gif format, and must reside in the same directory as the html page. So I converted my icons to .gif and placed in the required folder.
On the icon property for each button, I am not specifying a path, just the filename with no extension.
The icon is not showing up. I tried setting the icon filename via set_item_property(button_name, icon_filename, filename)
ON_NEW_BLOCK_INSTANCE and placing the path to where the html file is located. The icon will not show up.
Help?
Marie
null

Hi ,
U have to update the in registry.dat file
set default.icons.iconpath=/icons/
and map this virtual directory /icons/
in web listener setting with Physical
directory of ur Icons.
null

HTLM Web Gallery not showing pictures

When I upload from Bridge the web gallery it doesn't show the pictures? Yet, when I export the HTML web gallery to my hard drive it does. Any ideas?
Thanks,

Jim:
Welcome to the Apple Discussions. By not showing up do you mean the gallery is no longer listed in under the Gallery section on the left of the pictures in the gallery are showing a blank window with an "!" in the middle?
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Web galleries not showing up

Anyone having problem since the updates with Iweb not seeing posted web galleries?
I can access them, but they doe not show up the the insert .mac web gallery area anymore.
thanks

Are you referring to web galleries created by iPhoto? Try opening the iPhoto Library package like this and move the AlbumData.xml file to the desktop and relaunch iPhoto. Launch iWeb and try again. Also make sure they are not password protected.
OT

CAS console not showing up in Workbench

I installed Endeca commerce 3.1.2 components - mdex, platform services, tools and frameworks and cas on my windows machine. I did select CAS Console Workbench extension option during CAS installation. I then deployed Discover app using CAS and the app seems to be working just fine. But the CAS console is not showing up in workbench. It (CAS) works fine from command prompt. I tried uninstalling and reinstalling all the components but still the same result. Any idea what I could be missing or doing wrong? Thanks in advance!

If you have also installed the current iTunes version, download the current install and re-install it over the existing - no need to remove iTunes first.

OID web console not showing

Similar Messages

Maybe you are looking for