OIM and Exchange Auto Provision along with AD

Hi,
How can I configure an AD connector in OIM to automatically provision an Exchange account for a user?
At present as part of manual provisioning test, I have to assign the AD User resource and Exchange resource separately to provision a user with AD and Exchange accounts. Is there a simplest way to do it?
Please advise. Also please share if any documentation available.
Thank you!

Policy based provisioning should work fine for you.
Alternatively you can use an entity adapter or a combination of entity adapter and a policy.
Policy based provisioning is described in 11 Creating and Managing Access Policies in Identity Manager Administrative and User Console Guide (assuming that you are using 9.1).
Good luck
/M

Similar Messages

OIM - OID (11g) auto-provision thru ldap sync

Hi,
I have configured ldap sync. I have following questions
1. We have created custom attributes in OID and referred to custom object class. Now when I try to create user in OIM, user is auto-provisioned to OID. But the custom attributes in OIM are not getting provisioned to OID (unable to see the custom attributes in user object of OID, unless we refer manually the custom object class). Can any one let me know how to auto-provision the custom attribtues into OID?
2. When user is auto-provisioned to OID, it is not showing any resource profile details of OID in OIM? Is it the expected behavior? But create, udpate, delete are happening as expected.
Please let me know if any one know the solution.

Hi,
Where you able to achieve this?? i have similar requirment where, i have added 5 custom attributes in both OIM and OID, when i create the users these attributes doesnot get updated on OID....should i add these UDF in any objectclass which OIM understands??please suggest
Thanks in advance

Provisioning Allowed and Allow Auto-provisioning YES Role exists No

Hello,
I am unable to select the roles while submitting the user provisioning request.
The role additional details are set Yes for Provisioning Allowed and Allow Auto-provisioning
But Role exists is showing No; i have tried updating the roles in many ways, everything is getting updated except this paricular field.
Could you pls help me ...
Regards,
Sumanth

Hello Sumanth,
Can you successfully generate roles using the role generation option?
I have the same issue but I presently have issues with generating single roles ONLY as posted on this thread - "Illegal tcodes" error during the role generation phase of ERM in AC10
...so I am thinking it is becuase I can't generate single roles that is why the roles are not displaying. However, I can view the roles in other environments like risk analysis but not at the point of access request provisioning. It tells me no roles are available.
I sure hope someone will be able to help us out.
Thanks

Itunes updated and it deleted all my playlist and half my music along with it. Now if I want to sync my phone it tells me in order to sync it has to delete more stuff off my phone. I would like to get my music and playlists back, how do I do that?

tunes updated and it deleted all my playlist and half my music along with it. Now if I want to sync my phone it tells me in order to sync it has to delete more stuff off my phone. I would like to get my music and playlists back, how do I do that?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
tt2

OIM 11g R2 Auto Provisioning Issue

I have reconciled around 9K records into OIM and ran the evaluate user policies to provision them to LDAP.
Around 8.5K records got provisioned to LDAP, but the others are not getting provisioned.
I tried running the retry failed orchestrations and the orchestration cleanup and a few more got provisioned.
Now there are around 300 records which still need to get provisioned. I tried running the evaluate policies again but it is no working.
Am I missing something that should be done?
Please suggest what can be done to resolve this

please make sure that all the required fields / attributes that are needed for the provisioning are filled for the users not getting provisioned. Also check the status of the Account to be provisioned for any unprovisioned user does it state "provisioning"? if so check its history and try to find out the reason.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

How do I select a date column and display the millesecond along with it.

I am trying to select a date column from database and want to
display millesecond with it. How do I do this. I am aware of
the "alter session set NLS_DATE_FORMAT = 'MM/DD/YY HH:MI:SS'"
command. However, I do not know how to display this with the
millesecond.
Thanks for all the help.

Example:
SQL> CREATE OR REPLACE JAVA SOURCE
2 NAMED "MyTimestamp"
3 AS
4 import java.lang.String;
5 import java.sql.Timestamp;
6
7 public class MyTimestamp
8 {
9 public static String getTimestamp()
10   {
11   return (new
12   Timestamp(System.currentTimeMillis())).toString();
13   }
14   };
15 /
Java created.
SQL> CREATE OR REPLACE FUNCTION my_timestamp
2    RETURN VARCHAR2
3 AS LANGUAGE JAVA
4 NAME 'MyTimestamp.getTimestamp() return java.lang.String';
5 /
Function created.
SQL> CREATE TABLE test_time
2    (date_col VARCHAR2 (23))
3 /
Table created.
SQL> INSERT INTO test_time (date_col)
2 SELECT my_timestamp
3 FROM   dual
4 /
1 row created.
SQL> SELECT date_col
2 FROM   test_time
3 /
DATE_COL
2001-11-02 14:58:51.766

Exchange 2013 issues along with toolbox and exchange powershell

I have a server 2012 with exchange 2013, no errors on install, we have about 50 user mailboxes setup. about 3-5 times a day sending and receiving will stop working, we have to reboot about 3 or 4 times then it starts working again.
Also the Exchange power shell doesnt work, we get :
VERBOSE: Connecting to NVSVMSX.KATV.local.
New-PSSession : [nvsvmsx.katv.local] Processing data from remote server nvsvmsx.katv.local failed with the following
error message: [ClientAccessServer=NVSVMSX,BackEndServer=nvsvmsx.katv.local,RequestId=3c4178cd-3e21-4ebf-9c65-23e5855cf
17f,TimeStamp=11/11/2014 6:53:03 PM]
[AuthZRequestId=b12c2ecf-ff1f-42df-b0f8-441878180bfa][FailureCategory=AuthZ-CmdletAccessDeniedException] The user
"KATV.local/Computers/NVSVMSX" isn't assigned to any management roles. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : IncorrectProtocolVersion,PSSessionOpenFailed
we get that 3 times then nothing.
Also on the Toolbox we get MMC error
"Type is not resolved for member "Microsoft.Exchange.Configuration...."
Please help, we are at a loss and not sure what to do at this point, we have looked every where for a permissions issue and have found nothing so far.
thank you
BD

Hi,
Please check if this user was in Organization Management Group. If not, please use the following cmdlet to add this user to this group.
Add-RoleGroupMember “OrganizationManagement” -Member <member>
If this issue still exists, Run Setup /PrepareSchema and Setup /PrepareAD again.
In addition, please refer to this similar thread
https://social.technet.microsoft.com/Forums/sharepoint/en-US/33038c63-a993-4032-9355-023ae91a1c6a/cant-access-ecp-after-install?forum=exchangesvrdeploy
And hope KB 2898571 will be helpful for you.
To solve ToolBox issue, please try to install or uninstall ASP.NET 4.5 on Windows 8 or Windows Server 2012, use one of the following options:
Run the following command from an administrative command prompt: dism /online /enable-feature /featurename:IIS-ASPNET45
For Windows 8 client computers, turn on "IIS-ASPNET45" in "Turn Windows Features On/Off" under "Internet Information Services-> World Wide Web Services -> Application Development Features -> ASP.NET 4.5".
For Windows Server 2012 computers, enable "IIS-ASPNET45" using Server Manager, under "Web Server (IIS) -> Web Server ->Application Development -> ASP.NET 4.5".
Refer from
http://support.microsoft.com/kb/2736284
Best Regards.

Backup exchange - storage snapshot along with tradissional backup

Hi all
exchange 2010 (DAG)
up untill now it was backedup with netapp snapmanager (and net backup was backing up thoth snapshots to disc by NDMP)
now we replaces our storage to HP 3par.
we would like to deploy 3par snapshot for exchange but there is no option to backup the snapshot with net backup (as we did with netapp).
is it OK to backup the exchange DB with both snapshot fo exchange and both net backup? is there going to be issue with the logs trunck from bothe of the backup applications? or with the VSS?
I am conceder with the same issue for uor SQL DB backup

Hi
Are you taking snapshots of the actual virtual/physical machine for the exchange server? Snapshotting a machine is not supported on exchange.
Exchange logs will need to be truncated after each backup or you going to first run out of space and secondly if you run into a problem you will need to replay log files.

Microsoft Exchange drastically failed along with 123 OST database

Hey fellos,
We are facing 2013 Microsoft Exchange and recently faced HYBRID CONFIGURATION WIZARD ERROR. Try to fix with full efforts but failed.
Is there any way to save very dear 123 ______.OST files and these are huge in SIZE..! (Exchange orphaned offline database).
My Gratitude.

Hi Lucina，
Since your issue is related to Exchange server and OST database, our help might be limited.
Regarding to your issue, we suggest you post your issue to TechNet Exchange because you might get more helpful advices there.
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Thanks for your cooperation and understanding.
Regards,
D. Wu

IPhone and Exchange Calender issues persist with 2.1 update

Hi,
iPhone users cannot use the Exchange calender in my organization on their iPhones because of the following and Windows Mobile users do not have the same issue using the same settings. Exchange mail and contact work fine.
1. iPhone does not sync up existing calender events when Exchange account is added
2. Every event needs to be sent as an invitation to the Exchange account used on the iPhone. I did this after the 2.1 update and after a few minutes all the events that did show up from invitation suddenly disappear!
3. The iPhone cannot invite people to meetings. And if an event is created (for your own viewing) on the iPhone, if you edit the event it will not update on the Exchange side
4. After applying the 2.1 update I no longer receive invitation notices on the iPhone. The event just shows up in my calender but again, they disappear after a few minutes. The only events that stick are the ones I create on the iPhone and changes to that event to not reflect server side.
Has anyone come across this issue an if so are there any solutions? Thanks.

I actually discovered that the fix for the iPhone calendar not syncing correctly was either a recent MS update (We are using Exchange 2003) and or adjustment to Sites and Services in AD. So my fix above was not the fix after all. Some iPhone users during the last two weeks all of a sudden noticed their calendars were syncing and events were filled in.
From our Windows IT Admin when I asked them what they did:
“We ran Microsoft updates weekend before last, and we adjusted the Sites and Services part of AD so that our Domain Controllers are associated with their correct location (this change rendered RPC over HTTPS inoperable (it worked about 50% of the time prior to this change, based on which DC you authenticated against)).”

Can't find the proper sdk exe to start and run the SDK along with classes

Hello:
I have downloaded the java sdk development, several versions of it. However, I cannot find not one proper exe file that will open the sdk development interfaces. I have searched my computer and it does seem that I have all the files such as bin, ect... , even some sample classes, except for the main sdk exe that will open the java classes. So, I need some help with this issue, which would be greatly appreciated.
Recency

The SDK is not one single executable. And to "open java classes" doesn't really mean anything.
You'll want to start here:
http://download.oracle.com/javase/tutorial/getStarted/cupojava/index.html
Perhaps by "executing the JDK", you're talking about an IDE? If so, the NetBeans link on that page is what you're looking for. However, I strongly advise you to avoid IDEs and do things with a simple programmer's editor and command line until you a) have a good grasp of the language basics, and b) are clear on the concepts of language, IDE, JDK, and core API, and what separates one from the others.

Just purchased and installed lightroom 5 along with update. Upon attempting to import photos received "AgCreativeCloudUtils" message. Does anyone know how to move past this. thanks

Just purchased and installed lightroom 5 and the update. Upon attempting to import photos received "AgCreativeCloudUtils" message. Does
anyone know how to move past this.
thanks

Without proper system info and other technical details nobody can tell you much. This could be something to do with the sync features, so as a start turn that stuff off.
Mylenium

Does auto provisioning work with position based security

We are implementing GRC 5.3 and use position based security. I am able to run risk analysis for position based security but now we want to use CUP and push our roles to the positions. And finally we want to associate the user to the position. We want to do all of this through GRC. Is this possible?
Thanks!

Peggy,
For this to work, click on the tab (on top) which says by system. Here you can set up autoprovisioning by system. If you have 5.2, I don't know if this is available or not but it is available in 5.3.
Regards,
Alpesh

Downloaded Firefox and Zone Alarm came along with it and serves as homepage. Do not want it.

Since downloading Firefox yesterday, I cannot get rid of Zone Alarm. It comes up as my homepage, which I do not want. I go to options and it clearly shows my home page is yahoo, but, what comes up is ZA

P.S.
Official versions in all languages and for all OS
* Download page http://www.mozilla.org/firefox/all/

OIM and Exchange Auto Provision along with AD

Similar Messages

Maybe you are looking for