OIM How to control Scheduler in a cluster

If I want to limit which servers run the scheduler(and therefore which ones run the scheduled tasks) what is the best way to go about it?

Thanks! Good to know where to go to control this. Actually, as a follow up. Is it possible designate a specific task to a node? For example to have one node handle the trusted recon task so that only that node processes the provisioning?

Similar Messages

How to control traffic to internet through schedule

Hi,Guys
I would like to control my customers access to internet, just like 8:00 Am~5:00 PM can access to internet, rest time cannot.
Nice Day

Hi,
Thank you for your post here.
Please refer to the article below to get more information about how to configure schedule
http://technet.microsoft.com/en-us/library/cc441557.aspx
Best Regards
Quan Gu

How Does the scheduler works with ODI engine

Hi All,
I am new to the ODI and I was going through the documents over the web regarding the scheduling.
Can anyone please let me know how does the Scheduler in ODI is coupled with the ODI engine.
How does the internal scheduler works and how does the external one works. What are the processes the it calls while invoking the scheduler.
Your help will be highly appreciated.
Thanks,
Sumit

Scheduling in ODI is controlled by a special type of ODI agent, strangley called the ODI scheduling agent. This agent is installed as a service and as well as being responsible for all tasks associated with a normal agent is also responsible for managing ODI jobs based on any scheduling information associated with an ODI scenario. All scheduling information is stored in the ODI repository and the scheduler agent reads from this to determine which jobs/scenarios need to be executed and when.

How to control change request creation for particular IBase Component?

Dear Experts,
Can anybody suggest , how to control change request creation for particular IBase Component?
We have implemented ChaRM which is integrated with SAP ECC & SAP BI.
ChaRM is not integrated with SAP Solution Manager.
End Users are creating support notifications from -Help Menu- Create Support Notification.
The IBase Component is not editable once notification is created. This Ibase is copied to change request when the action-create change document is saved.
Requirement is that, during creation of change document, system should check the IBase component of support notification. If the IBase is related to solution manager system, system should restirct the change request creation.
Kindly suggest how to achieve this.
Regards
Vivek

Hello Vivek,
The way to do what you want is to create a schedule condition for action Create Change Document. The action has to be displayed only when the IBase/Component value differs from SolMan. To add the IBase/Component value to the container so that it can be evaluated during runtime, you will have to create a subtype of BUS2000116 on which condition can be buit.
See the following posts for more information :
Hope this helps,
BR.
Stéphane.

How to control PO Release strategy using WorkFlow

please tell me how to control PO Release strategy using WorkFlow.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 31, 2011 9:35 AM

Hi,
Yes they are same unless you differentiate by using
1> Purchasing Document Category i.e CEKKO -BSTYP
A..... Request for Quotation
F......Purchase Order
K......Contract
L......Scheduling Agreement
So if you just create a characteristics for CEKKO-BSTYP then maintain its values only for F so it will not be applied to RFQ

How to name elements and create cluster of named elements

I wanted to detail the steps I found, so that others could more easily follow what I found going through these discussions. While there are numerous examples, they lack details such as function names and how to achieve the steps. Most of them seem to cover only arrays. I welcome corrections. I'm not saying this is the best way; it is, however, a simple detailed description of one way to do it.
I wanted to create a cluster of various data types that could then be manipulated by name. Unfortunately, simply wiring an existing cluster to a Bundle by Name.vi does not assign the existing labels of the elements to the name field of the cluster. I don't know why.
1. Create an input cluster with dummy constants of the proper data type for each element.
How do you create an input cluster? Searching functions finds no "Input Cluster" function.
The only way I found was to place a dummy Bundle by Name.vi , right-click at the top of the leftmost of the two rectangles and select Create, then Constant. The result looks like the attached Creating Input Cluster.PNG
You might as well delete the Bundle by Name.vi at this point, because the changes make to the input cluster will only be reflected when it is connected to a NEW Bundle by Name.vi
Next, for my purposes, I needed constants for DBL numeric, string, and array of strings. I started by placing one DBL and one string constant on the block diagram. I copied these to create the ones I needed. Make the labels visible and type in the names corresponding the Bundle Names desired.
Since there is no function called "String Array constant", it is necessary to place the "Array Constant" function on the Block Diagram, then drag a string constant into the empty right hand square of the Array Constant. It immediately changes color to show it is a string array.
Drag each of these constants into the input cluster so that they appear in the order desired. It is a bit of a pain because the square resizes tightly around the existing elements after each insertion. You have to keep expanding the box at the bottom by dragging its sizing handles, so you can be sure each item is added to the bottom of the list. When done, my input cluster looks like Completed Input Cluster.png attached.
2. Place a NEW Bundle by Name.vi on the Block Diagram. Wire the input cluster to the top of the left rectangle of the function. Drag the down sizing handle of the Bundle by Name.vi until all the elements of the cluster are visible. You will see the names and it will look like Bundle by Name with assigned names.png attached.
3. All that remains is to connect the data wires for the individual elements to the left side of each named block and wire the output cluster. The result is shown in Complete design producing cluster of named elements.PNG attached. (Since only three attachments seem to be allowed, this last will be in a follow-up post.)
Attachments:
Creating Input Cluster.PNG ‏3 KB
Completed Input Cluster.PNG ‏3 KB
Bundle by Name with assigned names.PNG ‏8 KB

I wanted to add a brief statement about EDITING cluster controls because newcomers to cluster usage (like myself). The HELP is good on creation but says nothing about modification. While it has been posted other places, I think a "newbie" might appreciate getting this info here.
To edit a cluster control, open the CTL file, then
Add a control by creating the control on the front panel, then save the control.
To remove a a control, delete the control, then save the control file.
(Simple enough)
To modify an existing control
1. Move the control out of the cluster into a blank VI.
2. SAVE the cluster control file (CTL).
3. Modify the control in the blank VI.
4. Drag the modified control back into the cluster control.
5. SAVE the cluster control file (CTL)
NOTE WELL: don't skip step 2.

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

CRM Web UI :- How to Control number of session of Web UI for a user

Hello Experts,
We do have very specific requirement which SAP doesn`t recommend in terms of multi-sessioning for a user.So we are little worried upon the challeges.Could you please share your ideas/Experience on following?
1.How to Control number of Internet explorer session for the web UI (may be 2 or 3).?
Though SAP doesn`t recommned more than one but our client requires 2 or more than that but we need to fix it either
2 or 3.
So we are looking for specific setting for this.
2.What are the challenges we need to face if we implement option 1?
3.Specially in interaction record management
    a. Is there chance of loosing the data if agent has opened more than two session.
    b. In which session interaction record data will get stored,the one on which agent picked up the call or in the latest
        one?
Please let me know if I am not clear enough on any point.
Thanks in advance,
Shailendra Tolambiya

Hi Shailendra,
The following wiki page might be useful in this respect:
http://wiki.sdn.sap.com/wiki/x/gxdKDQ
Best Regards,
Shiromani

How to delete elements from a cluster?

Hello. I would like to know how to delete elements from a cluster. I got stuck with this problem. There is its own order of each element in a cluster. I tried to initiate an array but it seems like too complicated. In the attached file, I want to obtain only the data from "flow" not "pressure". I try to use array programming but it doesn't work. Would be nice if you help me to fix the file. Thanks
Solved!
Go to Solution.
Attachments:
test 1.vi ‏16 KB

Bombbooo wrote:
What about if I want to store data into the pressure array too? Do I have to create another loop or it can be done in the same loop as the flow loop?
Try this, for example. Modify as needed.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
test1MOD2.vi ‏9 KB
SelectFlowOrPressure.png ‏7 KB

How to control my MacBook Pro with my iPhone ?

I do wanna know how to control my Macbook pro just with my iPhone, please

If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

How to control follow up doc for Activities

Hi...
I have created 10 different types of Activitiy Doc. When I open any activity in crmd_order I'm getting all other activities as follow up docs(when I click on follow up icon). I dont want all of them, may be I need one or two out of those. How to control those can anyone have idea
Regards,
Ajay

Hi,
Check the copy control for transactions in
spro-->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types
If the transactions are maintained as follow up for the transaction you have created then remove the entries which you dont want as follow up.
Reward points if it helps.
Shridhar

How to control DE USB disk Automounts.

Hi,
Can someone please guide me as to how to 'control' Automounts by DE when we plug USB disk drives.
I have KDE4 on my Arch system. When I connect a pen drive/USB HDD which is formatted as vfat/NTFS, the system(or KDE) 'Automounts' it in /media and I have read/write access to it. But if I use the same drive and format it as ext4, it wont be mounted as read/write for normal users but only for root.
Now pen drives and USB HDD's are removable storage drives and hence are volatile and could not have a fixed mount point, so it cannot be mounted by putting an entry in fstab or could they?. And I need my USB HDD frequently, and manually mounting it through CLI everytime and working on it as root is a bad idea i guess.
I am posting this because m confused as to how to control this Automount feature-What is the backend to it? Because I've read that HAL no longer takes care of it and that HAL will be deprecated soon, instead UDEV takes care of it. If that is the case then should I be concerned about polkit? Because that is what's the output provided by Dolphin(freedesktop.org policy prevented blah blah).
Another thing is if HAL is still in use and Automounts my devices then is it independent or polkit is a part of it. Then, is using hal-easy an option or replacement to standard HAL. ??!!??
I tried HAL archwiki and used the code to give a user permission to give rw access to automounted ext filesystems, but then nothing is mounted, it sings the same old freedesktop.org prevented bla blah song. And I think this is a question for all linuxes using Gnome and KDE in general.
Any help is appreciated.

If by 'ability to mount as user' you mean to mount it manually but read/write access to normal users then yes. But primarily I need automounting as user, also be able to give access to other users for read/write et filesystem automounts.
Last edited by kapz (2009-11-17 01:12:56)

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

How to control a NI USB 6210 from a Lab View program?

Hi,
I started today with Lab View with some earlier experience long ago.
While it took me only about half an hour to get my first program running (great), installation time nor included (of course), I meanwhile read documents for some hours and cannot find out how to control measurement hardware in Lab View.
I want to use a USB 6210 to set a 1-bit digital port. But at the moment there is no USB6210 available so I wanted to write (or do you say draw ?) the program without it and if possible simulate the hardware.
I drew DAQ Assistant into my block diagram and selected digital line output but get "No supported devices found". I don't know if the appropriate driver was installed during Lab View installation.
Also I don't understand the mechanism between DAQmx, tasks and the real hardware. Now I have a "Digital Bool 1Line 1Point" Control in my block diagram. How do signals get from program flow to hardware pin? How can I create a simulation for not connected hardware?
Any help is greatly welcome
Thanks a lot
Martin

Okay here is some more tutorials if you get some free time, specifically the hardware stuff will be relavent.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Launch MAX, it was known as Measurement and Automation Explorer, there should be a shortcut in your start menu / desktop. Under devices and interfaces you can find your hardware and open test panels to control it. This is the first place to ensure your hardware is working. If the device isn't seen you'll need to install the drivers and DAQmx software. If it is there, great.
Now launch LabVIEW. The easiest way to control hardware is using the DAQ Assistant. It has many limitations and isn't recommended for large applications. But for something quick and dirty it works fine. You'll find it under the Measurement I/O >> NI DAQmx palette on the block diagram. If it isn't there you may need to reinstall the DAQmx drivers. This can happen if you installed DAQmx before LabVIEW.
Also you'll find under Help >> Find Examples on the toolbar, many examples on controlling hardware. Feel free to post some code if you are having problems.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How to read data from a CLUSTER STRUCTURE not cluster table.

Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.

Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi.

OIM How to control Scheduler in a cluster

Similar Messages

Maybe you are looking for