OIM Server Hanging up after restarting

Hi,
We have deployed OIM 9.1 on Weblogic server 10.3. The OIM server is being hanged when we are trying to restart the server. After several attempts the server is coming up. Please let me know, what is the cause for hanging and can we use Unicast address for the cluster and multicast address for the nodes. the multicast address is same for both the nodes and also let me know if there is any other alternate way to bring the server up without using the multicast address. Please find the xlconfig.xml below.
<Cache>
<Enable>false</Enable>
<ThreadLocalCacheEnabled>false</ThreadLocalCacheEnabled>
<ExpireTime>14400</ExpireTime>
<CacheProvider>com.thortech.xl.cache.OSCacheProvider</CacheProvider>
<XLCacheProvider>
<Size>5000</Size>
<MultiCastAddress>0.0.0.0</MultiCastAddress>

</XLCacheProvider>


<DataObjectEventHandlers>
<Enable>false</Enable>
<ExpireTime>14400</ExpireTime>
</DataObjectEventHandlers>
<ProcessDefinition>
<Enable>false</Enable>
<ExpireTime>14400</ExpireTime>
</ProcessDefinition>
<EmailDefinition>
<Enable>false</Enable>
<ExpireTime>14400</ExpireTime>
</EmailDefinition>
<RuleDefinition>
<Enable>false</Enable>
<ExpireTime>14400</ExpireTime>
</RuleDefinition>
Thanks,
Sai
Edited by: 798291 on Sep 28, 2010 1:42 PM

Hi Kevin,
Thanks for your quick response. Should I have the same Unicast address for the cluster and the nodes or can I have Unicast for Cluster and Multicast address for the nodes. and, Can I have the multicast disabled since it is not supporting our environment. Please let me know if there is any other alternate way.
Thanks
Sai.

Similar Messages

Is there a way that I can get Automator to start a server for me after restart of Mac

Hello!
I have a serverprogram from an external company that doesnt start after a restart of the mac that I run that server on. It starts the program but it doesnt start up the server of the program. All settings are right and I have consulted others with same config. After a restart the server turns up in the statusbar but as turned off. So I can go to the statusbar, click on the symbol and choose "start server".
As I cant get the server to start up automaticly I was wondering if I can get the automator to start it up for me after a restart of the mac?
Ifso how?
/ Mikke
Macmini i5 Mavericks

I found out how to make a flow and how to make a program of that. BUT it wont execute after restart. Anyone?

Server hangs up on restart

Our Mac (Panther) server for our courses went offline when the college experienced power outage problems a few weeks ago.
They couldn't get the college servers functioning for two days because of network problems.
When I tried to restart my server it showed a progress bar and a message. The message keep changing but the process stopped on "waiting for ipfilter…"
Yesterday I put it into Terminal mode and accessed it from another computer (via Firewire) and ran the Disk Warrior diagnostic software.
Disk Warrior repaired a few directory inconsistencies but did not find any real problems of any type.
Then it stopped on "waiting for directory services" and would not advance.
The server has a static IP address and that can be pinged when the server is locked up like this.
Today I ran the Utilities startup repair program, after that the server stopped at "waiting for Network Address Translation" in both regular mode and in safe mode.
Tried things like resetting PRAM and even put the drive in another computer to see if it might be the network card.
Had the same problems in the new computer and in different Internet connections.
Seems to be hanging at "waiting for ipfilter…" now. If I let it sit overnight it eventually gets to the logon screen, but it is frozen and I cannot enter an ID or PW.
Any insights?
Interestingly, we set up another server last week (SnowLeopard) and yesterday this server suddenly started to lock up in startup. Ran the Install disk First Aid and DiskWarrior- no problems indicated. Tried CMD-v to watch the progress and it hangs at ("/usr/sbin/mDNSResponder",.....) no such file or directory.
I have had servers for years and have never had such problems, now two at the same time. Very perplexing.

Over last week i have very similar hang at "my-server-name com.apple launch[1] (com.apple.mDNSResponder [70.]: posix spawn (usr/bin/mDNSResponder...no file or directory.
I had just reinstalled OS X Server 10.6.3 on reforatted blank drive - updated twice to 10.6.8 - after 5 hours downloading rebooting system restarted OK each time. Then did setup of file access (a separate drive with existing data) this was visble to client machines but strangrely not identical access although all clients are up to date OS X 10.6.8 and individually work fine,
Using console fsck -f t boots until it gets to point of cycling around above dianostic every 10 seconds.
This looks to my paymans knowledge that it trying to broadcast a DNS info, but this was nt needed in sstem since the server i running in aclosed shop intenal network only.
To reset to wen it ranonce wopuld need a repaeat of entire download and update to get to point whee i can configure server usage parameters.
Can anyone show how to stop "spawning?" retries and go to normal server admin panel?

Application Server cannot start after restart

Dear all,
I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start. All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
Another problem is that the database cluster cannot move to another server, with error:
"initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
Can anyone provide any assistant? Many thanks!
Regards,
Daniel

Hi Yaroslav,
In Application Server, Not started.
Log(1):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
For SQL Server(The one which Cluster cannot move group to):
Log(1):
The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: , , , , , , , , , , r, e, c, v, 1, 0, 0, 5, 4, , , , , , , , , , , , , , , , , , , , N, i, I, R, e, a, d, r, e, c, v, , , , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , , recv10054 NiIReadrecv nixxi.cp4245.
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(4):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
Regards,
Daniel

Server unreachable , back after restart -- explanation

A sun fire 480 server because ping-able but not accessible , when we gave up , we restarted the server and everything is fine and the server is accessible. I'm couldn't get an explanation for what happened.
- No crush dump
- explorer shows nothing wrong
What might be the problem ?!
Regards
HEBA
Edited by: HEBA2008 on Jul 30, 2012 5:09 PM

It will be impossible for anyone in the forum to help you to find a root cause.
No one has remote access to the system (and is not EVER going to get such access because that would be a flagrant security flaw), so no one can examine any system logs for details you accidentally missed.
You didn't provide any excerpts to any of your log files, nor any extensive description of that system in your data center (connectivity, assigned usage, or anything else relevant), so it would require mental telepathy to investigate the system.
You have an Explorer file.
That's great.
Go log a SR with Oracle TechSupport and have them examine that file.
If you cannot do that, then just make note on the calendar that the event occurred and go on with your business as usual.

After restart maverick starts in Disk utility and wants to re-install?

For many days, my computer wanted to restart, because off 10.9.3 update. Havent had the time to re-start yet, but today i was forced to because off other problems and my macbook hanging.
After restart, it did not start as normally, but starts in "choose language screen" and moves to disk utility screen after that. Here I can choose to re-install everything or to restore from time machine. I do have a week old backup, but i would rather have my system back up runni g without that.
I have tried pram and smc reset. I tried disk utility repair too. Trying to repair my hard disk (first level called 750.16gb wdc wd750...) i got an error
"Live file system repair is not supported"
Trying to repair second level (under this 750.16 and called disk0s2) i got an error saying:
"Disk utility cant repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Is there something wrong with the update, my hard disk or something else?
If the last change is to restore from time machine, i could try that. But my frien just had a similar problem after changing hard disk, and that restore was not going by the book. (We could onlu restore one user).

If you were to get a copy of one of the utilities that I mentioened earlier, they come with a bootable DVD if your Mac is supported to boot from their DVD. If not, they would need to be installed on a bootable drive from a working Mac and then you would boot your Mac from that external drive.
If you just want to install OS X from a backup, you will have to format your hard drive before you can reinstall anything to it.

Web server hangs after exceeding number of connection

Hi DBAs,
We are maintaining oracle 9i and webser on solaris.
so, after reaching 800 connection as shown on v$session the webserver hangs and we have to restart the webserver again.
Please help me where i need to check for this.
Regards
Asif

please find the following details :-
We are maintaining one DB server and 4 webserver .
OS Platform (for DB and Webserver)
: Sun Microsystems Inc. SunOS 5.9
Web server : SunONE 6.1
Database Version : Oracle Database 10g Release 10.1.0.2.0 - 64bit
Physical RAM (for DB server) : 8Gb.
Physical RAM (for Web server):4 web server each of 4 GB
Connect descriptor used in webserver to connect to oracle:
We use JDBC connection pooling that comes with the web server(SunONE)
The details of the configuration are:
<JDBCCONNECTIONPOOL name="wbol-pool" datasourceclassname="oracle.jdbc.pool.OracleDataSource" steadypoolsize="8" maxpoolsize="100"
poolresizequantity="2" idletimeout="300" maxwaittime="180000" connectionvalidationrequired="off"
connectionvalidationmethod="auto-commit" validationtablename="" failallconnections="off" transactioniso
lationlevel="read-committed" isolationlevelguaranteed="on">
<PROPERTY name="URL"
value="jdbc:oracle:thin:@{server ip}:1521:wborcle"/>
<PROPERTY name="User" value="username"/>
<PROPERTY name="Password" value="password"/>
</JDBCCONNECTIONPOOL>
Database is running in Shared mode(with 4 dispatchers) but clients are connected through dedicated mode.
max_process = 810
cur_process = 349
in alert.log file i have seen below error :-
Process q000 started up but failed with error = 20
user not able to stablish a connection through sqlplus also when web server hangs .
Hope you can help me to identify the problem based on above information, if any thing else u wanted to know plz let me know..
Asif

Server unresponsive after restarting, only sometimes

Hello,
I've been having an issue that will only sometimes occur after a scheduled server restart. My SBS 2011 Essentials server is configured to restart every Sunday so updates will apply. Most restarts occur normally and the server comes back up fine. However,
sometimes the server will restart and then enter an unresponsive state.
What I mean by unresponsive state is:
- The power light on the server box is on, and the Ethernet status LEDs at the Ethernet connection are active.
- The server will not perform its DHCP duties, causing all workstations to hang while trying to start up (Ethernet cable pull works around this and allows login with machine local users)
- Setting a static IP on a workstation and attempting to remote desktop or even ping the server fails.
- Physically using the servers monitor, keyboard and mouse to login fails, it will hang attempting to login to the administrator user.
The only way we have found to get the server up again is to restart it. Pressing the power button and waiting does not shut down the server at all, so, undesirably, we have to hold the power button down to do a hard power off.
After this happens I comb through the event log and look for issues but nothing really stands out, googling the event IDs usually just shows the things I find to be symptoms of the root cause, but I can never find the root cause. Interestingly, the event
log is completely clear from about 5 minutes after scheduled restart to the time we come in on Monday morning and have to give it a kick. Eg, Server restarts at 6am Sunday, last event log item is 6:05am and then nothing, until 7:30am Monday morning when we've
given it a hard power cycle.
Any ideas what I can look at to chase this down?

After some deeper parsing of the event log I found that two virtual box VMs starting as services were terminating for most startups, instead of starting well. I've added these two services to delay automatic start and they no longer terminate on the first
start.
If anyone wants to analyse their startup events here's the script I wrote: http://codepad.org/6rUvYRdb
I'm not sure if this has/will fix the problem, since it only randomly happens on restart and we restart once a week.
If it happens again does anyone know what would be the best way to shutdown the computer? As I said above, pressing the power button does nothing, and it only responds to having the power button held down to do an abrupt power off.

Error In Starting Jboss after installing OIM server

Hi All,
I have Installed OIM_Server(OIM 9.1.0.1) ON Jboss server(4.2.3) , I have 1 GB RAM m/c so have JVM setting as -XMS512m -XMX768 m. While installation of OIM Server, it showed the success message. But When I am starting the server , to perform post installation check, it is showing following error message .
Does anybody have any ideas what the problem is? Please provide the possible solution.
Thanks to All :)
Error :
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Unable to retrieve orbjavax.management.InstanceNotFoundException: jboss:service=CorbaORB is not registered.
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linked java:comp/UserTransaction to JNDI name: UserTransaction
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] addEnvEntries
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceEnvRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkMessageDestinationRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbLocalRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkServiceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkSecurityDomain
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] No security-domain given, using default: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linking security/securityMgr to JNDI name: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] AbstractWebContainer.parseWebAppDescriptors, End
2009-07-16 18:43:27,401 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Using session cookies default setting
2009-07-16 18:44:02,667 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750044964, maxLifeAfterPassivation=1200000
2009-07-16 18:45:11,465 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSchedulerThread"
2009-07-16 18:45:11,465 ERROR [STDERR] java.lang.NoClassDefFoundError: org/quartz/core/JobRunShell
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.quartz.impl.StdJobRunShellFactory.borrowJobRunShell(StdJobRunShellFactory.java:86)
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:352)
2009-07-16 18:45:11,465 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: Unexpected error during load of: org.quartz.core.JobRunShell, msg=PermGen space
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:560)
2009-07-16 18:45:11,481 ERROR [STDERR]      at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
2009-07-16 18:45:11,481 ERROR [STDERR]      at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-07-16 18:45:11,481 ERROR [STDERR]      at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-07-16 18:45:11,481 ERROR [STDERR]      ... 2 more
2009-07-16 18:45:11,481 ERROR [STDERR] Caused by: java.lang.OutOfMemoryError: PermGen space
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750126168, maxLifeAfterPassivation=1200000
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750133247, maxLifeAfterPassivation=1200000
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Mac mini server problem after restart. Desperate scream out for help

Hi there....after restarting my mac mini server I have a white screen with an apple logo in the middle. Anybody here to find help with?

Mac OS X: Gray screen appears during startup

Version 36.0.1 update hangs up after I click "Restart".

Version 36.0.1 update hangs up after I click "Restart". The Firefox window closes but nothing else happens although I cab see too processes called firefox in Task Manager.

Hi jscher2000,
I selected "I'm Feeling Lucky", and now it works ;)
Thanks for the help
But I do not understand why FireFox doesn't have this function as standard ....
reoz

After Updates Server 2008 R2 is restarting and not allowing to login.

After Updates Windows Server 2008 R2 is restarting and not giving login windows while installing updates - Update 3 of 3

Hi,
What is the current situation? If it still stuck, try a reboot. If this still does not help, then boot to safe mode. Windowsupdate.log is helpful for
troubleshooting, we need that log.

After restarting server BI Publisher is not started automatically

Hi all,
I am new in BI Publisher and have a problem. When I installed BI everything works OK. So I have logged on Publisher URL, authentication was successful and etc.
After restarting the server (I have Oracle DB and Publisher in one server, but in different home) I tried to log on to the Publisher console (http://oraclebi.mycompany.ge:9704/xmlpserver) and url is not responding,seems that service is not started.
Configurationdetails:
Installation Details
Middleware Home: /u01/app/oracle/bi
BI Oracle Home: /u01/app/oracle/bi/Oracle_BI1
WebLogic Server Home: /u01/app/oracle/bi/wlserver_10.3
BI Domain Home: /u01/app/oracle/bi/user_projects/domains/bifoundation_domain
BI Domain Name: bifoundation_domain
Instance Home: /u01/app/oracle/bi/instances/instance1
Instance Name: instance1
Configure Components
WebLogic Console
http://oraclebi.mycompany.ge:7001/console
Oracle Enterprise Manager
http://oraclebi.mycompany.ge:7001/em
Business Intelligence Enterprise Edition
http://oraclebi.mycompany.ge:9704/analytics
Business Intelligence Publisher
http://oraclebi.mycompany.ge:9704/xmlpserver
Could anyone help me how to start this service or how to setup to start it automatically?
Thank in advance
Edited by: zmachavariani on 17.01.2011 2:27

Hi,
There are many version of BI Publisher and also it can be deployed in many app servers. But from your log messages
I can see you are trying to use BIP 11g in Weblogic Server (besides 11g only allows -as of today- to install in WLS).
You should be aware that BIP11g after default installation uses a repository which is part of the BIEE Catalog and also
uses FUSION as security Mode (i.e. users and pwds are no longer controled in BIEE Admin but in OEM).
Therefore for BIP11g to work as default installation you also need BIEE11g to be running. For this i recommend you
to first take a look at one of my posts:
http://oraclebiblog.blogspot.com/2010/10/obiee-11g-architecture.html
and then follow the guidelines to start it all:
http://oraclebiblog.blogspot.com/2010/11/starting-and-stopping-biee-from-command.html
Now, if you only want to use BIP11g there is a workaround. Make a backup of xmlp-server-config.xml
and update the SECURITY mode from FUSION to XDO. Set a Local user for BIP and
Restart BIP11g from within OEM and login as Local User.
regards
Jorge A.

OIM Server Hanging up after restarting

Similar Messages

Maybe you are looking for