Oject List Data Provider is not working

I am having trouble using an Object List Data Provider.
The Field Guide books says when I drop an Object List Data Provider,
then select the list property, to bind it to a list, there is suppose to be an edit box to the right of the property that launches a pop up window.
Instead I am getting an empty drop down list box, no pop up like I do get with an Object Data Provider.
I can not even manually type in the list binding, it is frustrating.
I have the loanBean example all set, with the loanBean showing in the outline ready for binding, but no way to bind it via the IDE.
I tried adding the code the sets the binding, using the book example, but that does not help since the IDE still does not recognize my Object List Data Provider as a valid data source for the Table Display.
I have been working through the Field Guide tutorials, following the instructions to the letter. I have had no problems, up till now, in chapter 8.
I tried starting a new project from scratch, and I still have the same problem. Am I doing something wrong, or is this a known issue ?
I have downloaded and installed all updates as of February 19th.

Hi,
Please go through the following blog
http://blogs.sun.com/roller/page/winston?catname=%2FCreator
Hope this helps
Cheers
Giri

Similar Messages

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Netbeans 5.5 + VWP and Object List Data Provider

Hi there.
I'm trying to build an Object List Data Provider as in fieldguide_08_dataProviders.
I'm using Netbeans 5.5 + VWP
When I try to "Configure the Table" on page 360, there are some difference.
When I select Object List Data Provider and drop it on the Table component opens an unexpected choose for the target, then I choose tableRowgroup1.
The JSP souce don't change and is still
<ui:tableRowGroup binding="#{Schedule.tableRowGroup1}" id="tableRowGroup1" rows="10"
sourceData="#{Schedule.defaultTableDataProvider}" sourceVar="currentRow">
When I select objectListDataProvider1 the drop down opposite property list doesn't work. The button opens a selection window with no items.
Regards.

A better resource is http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/hibernate.html#object in conjunction with http://blogs.sun.com/LongLiveThePepper/entry/using_netbeans_visual_web_pack

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

List data provider + table

Hi,
i use table binded with list data provider, in table if i change checkbox or text field value and i want to retrieve new value it don't work. I use this code to d this:
try{
this.getSessionBean1().getZipEntryListDataProvider().cursorFirst();
do {
String dest = (String)this.getSessionBean1().getZipEntryListDataProvider().getValue("destination");
System.out.println(dest);
info(dest);
} while (this.getSessionBean1().getZipEntryListDataProvider().cursorNext());
return null;
catch(Exception e){
info(e.getMessage());
return(null);
if i bind table with a cachedrowset dataprovider this code work fine and i have the new values entred by user
how to do this with ListDataProvider
Thanks

Hi!
Try to look here:
http://blogs.sun.com/winston/entry/displaying_two_dimensional_data
Maybe it will give You some clue.
Thanks,
Roman.

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Oracle date parameter query not working?

http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999

still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results..

My international data roaming is not working in china, why?

I am currently traveling in mid-east china, but my data roaming is not working. it shows good single bar, but when I try to receive emails (from gmail or AOL account), it gives me error messages. it is very frustrating. it has been 3 days that I can't retrieve emails. I do have voice service though.

You might need to contact VZW for some trouble shooting help. Unless you are using a 3rd party simcard...then you might have to check with them to make sure their isn't an issue.

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

When can we expect a patch for Object Array List Data Provider?

Hey JSC Team!
When can we expect maybe, just maybe a minor patch for the Object Array List Data Provider loading class problem? Next Month? This Year? Next Year? Near Future? Long in the future? Sometime in the 22nd century?

I think one of the problem is
when u declare the ObjectListDataProvider in ur backing bean
it doesnt appear in the design time straight away
u have to clean build close and re open the project
which is quite time consuming.

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
Has anyone faced a problem like this!!!

No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost.

Droid Razr Maxx HD Data & SMS does NOT work in South Korea

If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

PowerPivot in SharePoint 2010 - Refresh Excel with Data Feed does not work

Dear all,
I created a PowerPivot chart out of a SharePoint exported list to Data Feed.
I then published it to a trusted Document Library.
The Chart is working well but is not updating.
So if I go to the document library and on the drop down meny of the publsihed excel file I choose Manage PowerPivot Data Refresh and force it to refresh, it fails with the following error message>
Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized.. A connection could not be made to the data source with the DataSourceID
of '3b4d4c28-909c-47d3-b4d6-07684f5e2ee9', Name of 'DataFeed mywebapp.domain TestPowerPivotDataFeed'. An error occurred while processing the 'testPowerPivot' table. The operation has been cancelled.
On the SQL Server I ran a profiler and got the follwoing:
exec [DataRefresh].[AddRunDetails] @RunID=54,@DataSourceID=N'3b4d4c28-909c-47d3-b4d6-07684f5e2ee9',@FriendlyName=N'DataFeed mywebapp.domain.local TestPowerPivotDataFeed',@Source=N'http://portal.gonzofish.local',@Provider=N'Microsoft.Data.DataFeedClient',@Catalog=N'dev/scrum/Data
Feed Library/TestPowerPivotDataFeed.atomsvc',@ConnectionString=N'Data Source=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc;Integrated Security=SSPI;Persist Security Info=false;Namespaces to Include=*;Service Document
Url=http://mywebapp.domain.local/dev/sc/Data%20Feed%20Library/TestPowerPivotDataFeed.atomsvc',@Result=N'F',@RunStartTime='2014-06-04 15:33:04.590',@RunEndTime='2014-06-04 15:33:04.727',@Comments=N'Errors in the high-level relational engine. The following exception
occurred while the managed IDbConnection interface was being used: The remote server returned an error: (401) Unauthorized..
A connection could not be made to the data source with the DataSourceID of ''3b4d4c28-909c-47d3-b4d6-07684f5e2ee9'', Name of ''DataFeed mywebapp.domain.local TestPowerPivotDataFeed''.
An error occurred while processing the ''testPowerPivot'' table.
The operation has been cancelled.
I followed the link http://technet.microsoft.com/en-us/library/hh487291%28v=office.14%29.aspx to set up the Data Refresh for the PowerPivot.
Thanks in advance.
Regards,
Gonçalo
Gonçalo

Hi Gonçalo,
The error message shows that the account didn't have sufficient permission access to the data source(SharePoint List data feed). PowerPivot data refresh is performed by Analysis Services server instances in the SharePoint farm, we may need to grant the
account running SQL Server Analysis Services (POWERPIVOT)
Read permissions to the SharePoint list we are attempting to refresh.
In addition, the external data sources that are accessed during data refresh must be available and the credentials you specify in the schedule must have permission to access those data sources.
For more information, please take a look at the following article:
Schedule a Data Refresh:
http://technet.microsoft.com/en-us/library/ee210651(v=sql.110).aspx
Hope this helps.
Elvis Long
TechNet Community Support

Web service proxy and data control are not working properly

Hi,
I am working on jDeveloper 11.1.1.6
I have a SOA web service which requires 3 inputs and return with a set of data.
When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
After that I have created web service data control and tested in that case also it is not showing any result.
What could be the problem ?
Please help.
Thanks
--NavinK

Hi Shay Shmeltzer,
Thanks for the reply.
I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
Please Help.
-- NavinK

Oject List Data Provider is not working

Similar Messages

Maybe you are looking for