Ok code is not getting in bp transaction

HI All,
Using BUPT i have added some custom fields in transaction BP for the role SAP Credit Management Under the Tab Fiscal Year Information.
In my custom screen I have used the FM FS02_BUPA_BP021_GET to get the values in Fiscal Year Tab.
Now my requirement is that, If I press The Previous Year, Next Year or Goto Year Button, I should get the OK code to my custom screen which am not not getting currently. So I cannot bifuracte the values based on the fiscal year in my custom screen. My screen values always remains same.
My custom screen is attched to a custom Fuction group. In stanadrd screen the FM used to get the Ok code is FS02_BUPA_EVENT_FCODE.
Kindly help me to resolve this as its critical.... Also guide me whether i should use FM FS02_BUPA_BP021_GET or any other way to get the details to my screen.
Awaiting an early response.
Thanks in advance.

Run it in 'N' Mode for no display, the messages are suppressed and collected in the BDCMSGCOLL table, which u later convert using the FORMAT_MESSAGE FM, this converts it to readable text to see the status of your records..

Similar Messages

R12: AP Tax Code window not getting closed

Hi,
When ever I open tax code window in AP(Payables>Setup>Tax>Tax Code) I cant able to close the tax code window, window gets hang, I didnt find any other way to close the window except closing the entire application.
We have recently migrated to 12.0.6 from 11.5.10.2
Please suggest to resolve this issue
Regards
Naga

Have you applied the latest CPCs ? See MOS Doc 557869.1 (EBS: R12 Oracle Financials Critical Patches) - these patches are mandatory. If you have, pl open an SR so Support can troubleshoot. Did this ever work correctly - if so what changes have been made recently ?
HTH
Srini

Currency code is not getting defaulted in IT0015

Hi,
Can anyone tell me why currency code is not defaulting in Infotype 15 on PA30 for employees. But currency is defaulted for IT0014. Kindly provide me a solution. I checked with finance people they also said everything is correct. I am using ECC6.0.

I am new to SAP. can you explain in detail. We are not running payroll. we are just configuring wage types and sending to ADP for processing. we didn't create any wagetype groups for IT0014 but it is defaulting for that, but not for IT0015.

Match code result not copied in the transaction

Hi there,
I had a request to check the following problem : in transaction VF02 (billing doc change), when finding a document through custom match code using the reference field, double clicking on the document in the result box does not copy the document number to the VF02 field. This is frustrating for the users...It seems that this behaviour is new.
I understood this is controlled through a database view (in this case M_VMCFX). When I compare with a standard matchcode that doesn't give problem, I notice that there is no generated view info when I do F1+technical details with this match code, I have M_VMCFA for the standard match code...
Any idea ?

hi Philippe,
Goto SE11, enter the custom match code in search help field, choosing search help radio button.
Check the <b>EXP</b> check box is selected for the field under consideration.
Hope this helps,
Sajan Joseph.

CommandButton code does not get executed with partialSubmit=false

Following code in Jdev11g
<input type="text" value="#{myBacking.text}"/>
<af:commandButton text="Click" action="#{myBacking.doSomething}"/>
<af:commandButton text="Click" actionListener="#{myBacking.doSomethingElse}"/>
public void setText(String value)
   System.out.println("Setting value");
public String doSomething()
   System.out.println("Clicked");
    return "";
public String doSomethingElse(ActionEvent e)
   System.out.println("Clicked with event");
} I always get following output:
Setting valueI never see the output from my commandButton. It seems that my button does not executes it's code but just notifies the components to call their setters.
I notice that when i set the partialSubmit to true, de code do get executed.
Why is that and what is causing this behaviour? How can i use my own code in the buttons without setting the partialSubmit to true? I do need a complete refresh of the page and can not use the partialSubmit but when it's set to false, it ignores my code...

They are inside an af:form
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document id="doc1">
      <af:messages id="m1"/>
      <af:form id="frm1">
           //MY buttons are here
      </af:form>

Application process code is not getting the value

Hi
I have implemented search functionality on page 0 (One Textbox and one ImageButton).
on clicking on image button
I am calling a application process to redirect a page on the basis of entered value.
I am using following code in application process:
DECLARE
l_number NUMBER;
rec_count NUMBER;
BEGIN
l_number := TO_NUMBER(:P0_SEARCH);
SELECT COUNT(*) INTO rec_count FROM CASE_DATA WHERE CASE_NUMBER = l_number;
if rec_count >= 1 then
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:42:&SESSION.::&DEBUG.::P42_CASE_NUMBER:l_number');
End if;
exception
when others then
NULL;
END;
:P0_SEARCH is the name of search textbox that is on page 0.
when i clicking on image button then this value of l_number is not passed to the
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:42:&SESSION.::&DEBUG.::P42_CASE_NUMBER:l_number');
its giving an error
ORA-01722: invalid number
and in url its showing
http://apex.oracle.com/pls/otn/f?p=31774:42:16398188927210884::NO::P42_CASE_NUMBER:l_number
but its working if i am putting the static value as
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:42:&SESSION.::&DEBUG.::P42_CASE_NUMBER:22');
its redirecting the right page as
http://apex.oracle.com/pls/otn/f?p=31774:42:16398188927210884::NO::P42_CASE_NUMBER:l4
So, please help me how to pass the value to redirect.
Thanks
-PM

Hi,
Try
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:42:&SESSION.::&DEBUG.::P42_CASE_NUMBER:' || l_number);Br,Jari

Change in Country code does not get reflected in iTunes in iPhone

Hi,
I just moved to USA from India. In my apple id, I changed the contact info, and country code and ofcourse the payment card details. Then I synced up my iPhone on my laptop. When I try to search the apps (Bank Of America Mobile Banking) which are available on USA Store are not visible on my iTunes app on iPhone. But they are visible in iTunes on my laptop.
I have rebooted my iPhone, laptop and then synced them. Still the issue remains.
Thanks in Advance
Anand

I got it..
Just tried to install an free application which was available in India store. Then I got a message saying I cannot use store from this country and it took me to USA store. From there I could download necessary app from USA store.

Infopath c# code form not getting updated

Hi All,
I trying to publish infopath c# coded form, it published successfully but unable to open from browser. I found log 'Type: FileNotFoundException, Exception Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002))'. Even restarted
system but no luck! Could anyone help to fix this issue, thanks in advance!

Hi,
According to your post, my understanding is that you are unable to open Infopath c# code form from browser.
You need to make sure you develop the InfoPath Form correctly. Please refer to:
Introduction to Programming in InfoPath 2010
In addition, if the form template is moved, you need to relink the InfoPath form to point to the InfoPath form template that has been published to a new location.
More information:
How to open an InfoPath form and template that were moved or copied
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Re: Error Code 80240020; Not getting Updated to Windows 10 (MSI GT70 2OC)

Download the ISO file and install the upgrade from there. As for sound yes you need to update your bios as said above. This is something completely different from upgrading windows.

Quote from: huijbers on Today at 09:23:38Just googling there seems to be an authorised service center in BA
Mmmm.. You are right... I will think about it.
TY!

Tax code not getting picked up from PO during SES

Dear Experts,
I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed my PO using limits.
Now when I prepare SES using this PO, Tax code is not getting picked up from PO and some tax code(I1) appears. Since I don't want end user to input any tax code I've left it blank.
Finally when I am doing MIRO, i am not able select the desired Tax code(say I8) as it is not available for selection. I get only one Tax code(say I1) available for selection. Even other Tax codes are not available for selection.
Please advise, how do I resolve this, why is the Tax code not getting picked up in SES? and why am I not getting other tax codes for selection in MIRO?
Thanks and Regards
Mansih

Hi,
Tax for service maintained in the service PO in the INVOICE TAB in item details. You are not going to maintain the service tax during SES. In SES you are just recognizing / confirming the vendor performed /completed the required service given to him.
During invoice tax code will flow from service PO to Invoice & you need to just select check box u201Ccalculate taxu201D & remove default tax code in MIRO, if any tax code set for default entry in MIRO. If you want your service tax code should appear in the MIRO screen then just activate in t.code:OBZT (relevant for all transaction),then you can select your service tax code during invoice verification WRT service PO.
Regards,
Biju K

MICN transaction not getting Material List

Dear Friends
Using transaction code MICN, not getting materials list for cycle counting. Is there any setting in SPRO. Please advice me.
Regards
Saravanan.S

hi
OMCO is a customization trnx.
check following links for step by step information on cycyle counting
http://www.sap-img.com/mm010.htm
http://teds02.state.pa.us/eups/Procurement/MIBC_TV0160_1.htm
check ur parameters as per this
Vishal...

QS41_Code are not getting displayed

Dear Experts,
Scenario is,
1.     T-Code QS41
2.     Under code groups (of any catalogue) certain codes have been created.
3.     The same entries can be viewed through tables QPCT and QPCD.
4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
6.     The message that we got is No entries found that match selection criteria Message no. SV004
Few more inputs,
u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
Best Regards,
Anand Rao

Hello Anand
I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
please look into the below link also for reference
Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
Regards
Gajesh

Taxcode not getting populated in MIRO Header in Dropdown

Hi All,
We created a new Taxcode through FTXP transaction for country and TAX schema and maintained condition records in FV11 transaction for relevant conditions.
We created a PO with new tax code received goods.
But while in transaction MIRO for LIV , new tax code is not getting populated at header in TAXCODE field.
I have checked SDn for the same , they have specified OBTZ transaction for taxcode.
I havent used this T.code in my previous assignments.
Please throw some light on the same.
With Regards,
Vijaykumar P

Hi All,
Thaks for reply,
But default tax code is maintained in OMR2.
In MIRO transaction if we go to tax code tab and click Calculate Tax, the tax code in Basic data tab should get updated and all taxes has to be calculated correctly.
But in this case the taxes are not calculated and taxcode is not appearing in dropdown also.
Please do throw some light.
With Regards,
Vijaykumar P

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

XML function not getting compiled in Pro C

Hello
I have written following statement in ProC
          EXEC SQL
          select extract(x.xml_data,'//ADDRESS/SERVERS/@REFSYSTEM').getStringVal(),
extract(x.xml_data,'//ADDRESS/SERVERS/text()').getNumberVal()
          INTO :h_refsystem,
          :h_reftext
from xml_str_table x
where key_no = 1234
and x.xml_data.existsNode('//ADDRESS/SERVERS[@REFSYSTEM="ORACLE"]') = 1 ;
and when compiled it give error " extract(x.xml_data,'//ADDRESS/SERVERS/@REFSYSTEM').getStringVal()
                                                  *. should be replaced with date, time etc*
Above query is returning output when I run on Oracle, but same code is not getting compiled in Pro C. Can you please advise what should be done to resolve this issue?
Thanks in advance,

Hello!
I found out that the problem was not in the variable os_create_id as I described before, instead in the another variable, l_temp_sku.
But a strange behaviour persists.
The program aborts strangely, if the following variable l_temp_sku isn't initialised like this:
l_temp_sku[0] = '\0'; (if this is done the pro*c runs ok)
This variable gets it value from a Output variable of the package called, and these have the same length, as you can see above.
In the old machine (version 8.1.3.0 as already mentioned) it worked fine without initialisation.
The (strings) precompiler options are the following:
dbms=v8
char_map=string (We already tried to change this to VARCHAR2)
My questions are:
Is this a normal behaviour or is this a non documented feature (bug) ?
Is there any precompiler option that solves this kind of problems ?
We have lots of Pro*C´s with situations like this one, our problem is if all these programs start to blow without warning. Only after lots of time spent around this Pro*C we found where was the problem, and what kind of problem.
/* Code Extract: */
char ls_error_msg[NULL_ERROR];
EXEC SQL VAR ls_error_msg IS STRING(NULL_ERROR);
char l_temp_sku[NULL_SKU];
EXEC SQL VAR l_temp_sku IS STRING(NULL_SKU);
EXEC SQL EXECUTE
DECLARE
L_table VARCHAR(50) := NULL;
L_sub_sku WIN_WH.sku%TYPE := NULL;
L_avail_stock WIN_WH.STOCK_ON_HAND%TYPE := NULL;
O_error_message VARCHAR2(255) := NULL;
BEGIN
if NB_SUB_SKU_SQL.NB_F_CHECK_SUB_SKU(:os_sku,
:os_from_loc,
:os_to_loc,
:os_tsf_no,
:os_tsfalloc_no,
:os_create_id,
to_date(:os_system_date,'YYYYMMDDHH24MISS'),
L_sub_sku,
L_avail_stock,
O_error_message) = FALSE then
:plsql_pkg_failed := -1;
:plsql_pkg_message := O_error_message;
SQL_LIB.BATCH_MSG(:ol_sql_holder,
L_table,
:plsql_pkg_message);
:table := L_table;
else
/* Only if ret true and the sub sku, everything its ok */
if L_sub_sku IS NOT NULL then
:l_temp_sku := L_sub_sku;
:plsql_pkg_failed := 0;
Best Regards,
JAP

Ok code is not getting in bp transaction

Similar Messages

Maybe you are looking for