Okay every time i plug my ipod up to my laptop a message comes up and says one of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Can someone plz help me ive done everything.

I really need assistance/help with my ipod because it was working fine one day. Then the next day i decide to put more music on it then this message came up, and ive tried all the troubleshooting stuff and different links to help but still no success. But theres one thing i havent tried yet someone told me to buy another Apple charger and wall plug in to see if that works other than that i need help because i went to settings and erased everything off my ipod to see if that worked and it didnt so all my stuff is gone....Yeah i was ****** but plz help me!

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Similar Messages

Computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

https://discussions.apple.com/message/23791369#23791369
https://discussions.apple.com/thread/5325044?tstart=0
more
https://www.google.dk/search?q=restore+iphone+error+29&oq=restore+iphone+error+2 9&aqs=chrome..69i57j0l5.4603j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

Cannot sync iTouch. {"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."}

Any help? I have not synced the iTouch in quite a while because it could not be found after an out-of-state move. I just found it, after two years, and am wondering if it will sync if I Restore it. I don't want to lose all of my music and if there's a way to avoid that, I would appreciate it the recommendation.
jvb654

Hello jvb654,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Follow these steps, testing to see if the issue is resolved after each section.
Best of luck,
Mario

My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

One of the usb devices attached to your computer has malfunctioned, and windows does not recognize i

I am a damsel in distress. Every time I turn on my printer, I get ths message: "One of the USB devices attatched to your computer has malfunctionedand windows does not recognize it: . All was fine until I put in new ink today. I had not used the printer for about ten days prior to this. I went through the HP line of troubleshooting but nothing has worked. I have Windows 7 64 bit
Thank you
Katt

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Ipod shuffle 512mb 'One of the USB devices attached to this computer has m'

Hello, my ipod shuffle 512, which was working fine, now prompts following error message on any pc i plug it into 'One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it'
Can play music that's already on it and it takes a charge but is not recognized by itunes or windows xp
Out of warranty, any ideas appreciated, thanks!
dell Windows XP

Hello, my ipod shuffle 512, which was working fine,
now prompts following error message on any pc i plug
it into 'One of the USB devices attached to this
computer has malfunctioned and Windows does not
recognize it'
Can play music that's already on it and it takes a
charge but is not recognized by itunes or windows xp
Out of warranty, any ideas appreciated,
thanks!
Buy a refurbed one from online Apple Store... 1GB 1st Gen is $49, 1GB 2nd Gen is $59...

IPod Touch 2nd Gen - "One of the USB devices attached to this computer...

Advance Happy Martin Luther King Day to all,
Hi guys, I just got myself a 2nd Generation iPod Touch last December 2008. At first it really worked fine, I have never had any problem with it until today. early this morning when I was transferring a movie to my iPod, my PC froze, so what I did is pulled the USB attached to my iPod and I push the little button on my PC to restart it. Then after restarting, i tried to connect my iPod and it gave me an error saying
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
I tried, restarting my computer, reinstalling my itunes, repairing my itunes, and still it always gives me the same response when I try to connect my iPod. At first I thought that maybe my USB port really has problems and so tried using other ports but it always give me the same results. I even tried to connect my digicam, PSP and webcam and those worked properly, I also tried to run a diagnostic thru my USB ports and it worked well saying that I do not have problems with my USB Ports.
What will I do now? I tried reading here in apple support section but the only thing I found was for the iPod with the Wheel. Please help me fixing my problem.
Thak you soooooooo much.

I've been trying to fix my own iPod for a while. Different problem but I think this might help.
Ultimately, if your computer HAS been able to recognise your iPod at one point, it's a driver problem.
You didn't specify which OS you're using, but I'll assume it's Vista.
This might help you:
Download the new version of iTunes
Save it somewhere on your computer
UnZip the program using something like WinRAR or The Extractor
In the folder, locate Apple Mobile Device and double click it
Remove the program
Restart your computer
Re-install the program
Connect your iPod
Things should be working now. If not:
Click Start
Type Run in the search field
Type "devmgmt.msc"
Click OK if you are get a prompt
Scroll to Universal Serial Buses and look for "Apple iPod" or "Apple Mobile Device USB" or something to that effect. (If it's not there it may be in Imaging Devices or Portable Devices)
Right click
Properties
Click the Driver tab
Click Driver Details
Tell me what you see.

Okay every time i plug my ipod up to my laptop a message comes up and says one of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Can someone plz help me ive done everything.

Similar Messages

Maybe you are looking for