Old Mac running Mountain Lion 'sees' Canon IP5000, new MacBook pro will not. No driver available from canon. Is there a way of transfering whatever is working from old mac to new?
I have two older macs running Mountain Lion that have been upgraded over the years from Leopard. They have continued to be able to print to a Canon IP5000 and use a driver that is fully functional. On the new MacBook Pro, the printer is found, but no driver is available for Mountain Lion from apple or Canon. Is there a way of getting the driver info from the old mac so that it will work on the new one?
Sorry, it says "New Event," not "New Entry." My bad.
Similar Messages
-
New MacBook Pro will not download Mountain Lion. The App store simply has a dead download button. Any help?
If it's new, read. http://www.apple.com/osx/uptodate
-
Every time I turn my iMac on it will not connect to the internet until I open System Preferences / network / Assist me. that reports that my internet access appears to be OK, and hey presto my web home page appears, and everything if ok. The same happens if I have opened Mail, nothing until I've gone through the above proceedure.
This has been happening for a week.
The iMac uses Mountain Lion.
I have no such difficulty with my Macbook Pro which runs Snow Leopard.
I have deleted the safari caches and logs, to no avail.
Any suggestions would be greatly appreciated.
Deerick.Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the grey Apple icon and a progress bar appear. The boot up is significantly slower than normal.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Permissions Troubleshooting
Step by Step to Fix Your Mac -
iCal has stopped synching calendars correctly with my iPhone 3GS. I am syncing via iTunes, not via the cloud; I have the latest patches for Mountain Lion; I cannot upgrade the machine's OS, because I need Rosetta. The iPhone is running the latest version of iOS Apple has pushed, but this began a couple of patches ago - I was holding off on the latest because of Reasons, and upgraded hoping the upgrade would fix it. It didn't. I also have the latest version of iTunes for Mountain Lion.
Symptoms:
No appointments made on the phone, in any calendar, make it into iCal. (I have five calendars that used to sync; all stopped at once.)
Old appointments made in iCal before this started happening still sync correctly from iCal to the phone.
New appointments made in iCal sometimes make it onto the phone, and sometimes do not. I haven't been able to detect a pattern.
When new appointments made iCal do make it onto the phone, they are correct, except that there is always a second ghost appointment also created, only on the phone, called "New Entry." It will have the same time and date information as the actual appointment, and be listed as the correct calendar, but will contain none of the associated appointment data.
I have tried:
Upgrading phone to latest iOS version
Desyncing all calendars from phone, then resynching them.
Telling iTunes to overwrite all calendar data on sync. (I know this actually happened, because appointments I'd made on the phone which had not synched disappeared after overwrite was initiated.)
Resetting phone to factory and reapplying everything from scratch. (This was the most recent action, two weeks ago, was a huge pain.)
None of these resulted in any change in observed behaviour.
What is new in the last few days is that until now, all iCal appointments had been making it to the phone, so as long as I made the appointments in iCal first, I could at least know of them while in the field. Alas, that is no longer the case.
Any ideas?Sorry, it says "New Event," not "New Entry." My bad.
-
Is there going to be a firmware upgrade for mountain lion customers that have a Macbook with a soild state drive so we can use the Power Nap feature?
here: http://www.apple.com/osx/whats-new/
"Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update."
We have to wait for the Firmware-Updates. Some are already here: http://support.apple.com/kb/HT5394
And I am shure, that you will need for Power Nap one of the newer Macs with SSD from 2011 and 2012. -
I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!
They are Safari bookmarks and Snow Leopard Safari will open in Mountain Lion, but won't give you a window?????
Here are the bookmarks, since I'm now in Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
http://ihelpyourmac.com/wordpress/?p=23
http://hints.macworld.com/article.php?story=20111014102515403
http://hints.macworld.com/article.php?story=20111014102515403
Advance warning - Mail worked fine.
I had fits with the last link I posted. At first it worked fine, then all of a sudden, it quit working. I now have iCloud - iCal syncing, but iCal is read only. Not a real big deal since you can log onto iCloud using Safari and post a new event.
I finally gave up on Address Book because it kept creating multiple contacts, which if you tried to merge or delete the multiple contacts, the contacts were deleted. It also worked at first and then stopped working as it should. -
I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox for now. any help? Firefox and safari are like night and day. i just want safari back.
Thanks.Adobe support article.
Adobe Flash Player Troubleshooting
Adobe Flash Uninstaller -
Mountain lion won't install on macbook pro 3,1
We have a MacBook Pro version 3,1 computer with 10.6.8 running.
Plenty of disc left, 2 Gb RAM.
The install process goes in a loop, from app store to www.apple.com/osx to pushing the "upgrade" button and back to the app store page.
I'm not really a Mac kind of person, it can tell.
I ran a hard disk utility to check and correct permissions but it didn't help.
any thoughts out there? I just want to run lightroom 5 and it needs 10.7 or better.
Can I buy 10.7 someplace?
Thanks
DarrellHello darrellsmith,
While i currently have no solution or suggestion for your problem, i would like to mention that even though Mountain Lion technically supports your model MacBook Pro, i advise against upgrading to mountain lion. It will put significant strain on your system resources and most tasks will perform very slow. If you really do need Mountain Lion, at least upgrade your RAM to 4GB. I know that 2GB is the minimum requirements but you'll lose those 2GB by just booting up and starting Safari. Add the software you want to use on top of that and your performance will be severely impacted.
Also, make sure you have a good backup of all your data. Upgrading an older system and skipping a major release in the process can create some issues or bring issues to light that you already had but just were not aware of.
A possible solution could be to create a bootable installer on an external drive, instructions can be found here.
For your system, OS X 10.6.8 would be the recommended OS and will give the smoothest performance. You will, as you've noticed, be limited to the applications you can run. -
I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?
A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465) -
Hi
After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
Thanks
EitanTry making a new network connection and renewing the DCHP lease as detailed here:
fix-os-x-mountain-lion-wireless-connection-problems -
I downloaded Mountain Lion in my i have macbook pro retina display last month. but I don't get airplay the option on my macbook. I went to display preferences, but the airplay is not available. What is the next step?
You also need:
Apple TV (2nd or 3rd generation) with software update v5.0 or later. -
In mountain lion does the late 2011 macbook pro back up while it is asleep
In Mountain lion does the late 2011 macbook pro back up while it is asleep?
No. No computer backs up while asleep.
-
When updating mountain lion 10.8.4 on Macbook Pro Retina animations became choppy will there be another update to fix this ?
Reset PRAM. http://support.apple.com/kb/PH4405
Start up in Safe Mode
http://support.apple.com/kb/PH11212
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836 -
TS3638 mountain lion v10.8 for my macbook pro.
I have a receipt for my recent purchase of mountain lion v10.8 for my macbook pro. I cannot find it anywhere to download. It did not download automatically at the time of purchase. What shall I do?
From the App Store menu bar top of your screen click Store > Sign In
Now type Mountain Lion in the search field top right corner of the window then press Enter or Return on your keyboard.
Click where you see: Download -
just bought macbook pro and using home sharing to transfer all music and movies from old mac, if i start syncing iphone in new macbook pro will i loose all content already on it
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Maybe you are looking for
-
Mini DisplayPort adapter for 23" Apple HD Cinema Display?
hello all, I'm sure this has been asked and answered here, but I can't find it! (grrr...) I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. T
-
Analysis Authorization for nav Attr Issue
Hello: I have a 0COMP_CODE as an attribute of 0SALSORG and it is marked as authorization relevant. i.e 0SALESORG_0COMP_CODE is authorization relevant. I created an analysis authorization Object ZCOMPCODE_1000 by adding following in it. InfoObject
-
Brand new Macbook Pro, running OS X Mavericks. Latest trial version of Acrobat Pro. I need to make lengthy (say 1,000 pages) document searchable. OCR crashes after a couple of hundred pages every time. I get an error like this: abort() called termina
-
Whem I try to update it tells me I do not have some permmissions
I currently am running version 3.0.14 and I have not been able to update to newer version. I can download but when I open it a message comes up "Unable to open as you do not have all permissions" I have a Mac with OS X 10.6.5
-
How to edit PDFs in reader on iPad, and how to undo, aka back button
I am new to iPad. How do you undo edits on Adobe reader?? There's no back arrow or undo button.