Older Airport Extreme Problem

I've had an old original flying saucer airport extreme (802.11.g) working well in my home for over 7 years. It's hooked up to a Hawaiian Tel DSL modem and has worked flawlessly since the beginning. It's running a wireless network in my home for my newish iMac running OSX10.5.8, my pretty new MacBookPro running OSX 10.6.4 and my brand new iPhone4. All have performed beautifully until yesterday when all of a sudden the MacBookPro and the iPhone 4 can no longer access the wifi network, although my iMac sees it perfectly! Anybody have any troubleshooting ideas? I can access the APExtreme from the iMac using Airport Utility, but not from the MacBook Pro. Any help will be greatly appreciated.

You need the latest version of the Airport Utility, download it here:
http://support.apple.com/downloads/DL839/en_US/AirPortUtility.dmg

Similar Messages

New Airport Extreme problems or DSL router problems

Hi all,
List of what I have: Time Warner Cable (motorola modem) DSL, Latest Airport Extreme (with 2.4Ghz channel 5 & 5GHz channel 149) with the updated version 7.6.1, 2008 MBP4,1 with 2.4GHz Core 2 Duo with Mac OS X 10.5.8.
Now the problem, when I am on my MBP on the web internet slows to a stop, I will go to Systems Preferences, Network, (at this point Airport shows connected Full bars for the ant symble and a green light), then go to: Assist me... , I click Diagnostics, (On the left side) List: Airport (Green), Airport settings (green), Network Settings (green), ISP (either amber or red), Internet (either amber or red) and Server (amber or red).
So, basicly I keep looseing ISP, Internet and Server, now for the kicker, It does not happen every time i'm on my MBP or every day. But if it happens in the morning it will happen all day long.
This was happening with my old Airport Extreme so I up graded to the new one, worked without a problem for about a week, then started again reset & re installed several times changed channels (now back to default settings) I was hopeing that getting the new AE would take care of the problem so I coild start useing streaming TV but I'm not going to spend the money if I can't have the internet all the time.
By the way we just moved from one state to Maine never had this problem before, both area's are rural, & both are with TWC.
So the question is: do I have a TWC Modem problem or Airport Extreme Problem or is it just my MBP?
I have a Win7 desktop hard wired in, and my wife has an ipad2 but she is not home much and dosent seem to be around or on the web when this happens.
I am a serious NOVICE so if you give advise please be very basic, Step by step!!!
Thank you all in advance,
Not So Mad Max, But Getting there!!!!

P.S. I do have my AE set to be hidden with WPA2 set and a discoverable Guest also with WPA2 set!!
Thanks
Not So Mad Max

Connecting and older AirPort Extreme to my MBPro Retina (MBPr)

I have a older AirPort Extreme ( the round white saucer type) maybe 2005? Was give to me by a friend. I am trying to hook up the AirPort E and the airport Utiltiy see it. But when I click on the base station I get this "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information. Also in the AirPort Utility page it shows the world glob that has a green light and then down from that my AirPort Extreme and it has NO green light.
I have click onto the support link and downloaded the utility 5.6 but that can't be intalled. It tell me it's not supported by any of the drives or something like that?
My intenet, I use AT&T 2wire & the Ethernet cable connect to the AirPort E. I can print with USB connect to my MBPr but not via Wifi. I can print from my iPad using a Handyprint app.
What I like to do is print wifi without haveing to use the USB and I like to set up my AirPort E basestation. Can anyone help me? I don't really want to buy a newer basestation. I was never able to print via wifi on this MBPr and even before i used the handyprint app. However, I have print via wifi on a PC with the basestation hooked up just like I have hooked up with on my MBPr.
I hope you can understand my question, I am not very good at posting my question. New to the Mac world. I also look for support in the forms but could not get fine what I need.
Thanks ahead of time for any help!

Just another reason to never use an Apple router. All other routers I have ever heard of use a Web Browser to do all configurations. I have a router I bought in the early 2000s that I can still use if I like, actually several of them.
Leave it to Apple to restrict access to older Airport base stations making people that think they need to buy a new Apple router to go with their Apple computer.
Just give that Airport base station back to your friend or stick it in a closet. You don't need an Apple router. Any router will work, or should work, with any Apple computer or other Apple device.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine.

I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

Older airport extreme

Trying to set up an older airport extreme for my father in law. Airport Utility says:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
When I downlad 5.6 and try to install it I get the message that I can't run 5.6 on on my MacBook Air running 10.8.2.
What can I do to set this up? Should I just through away this perfectly good (but older) airport extreme?
Thanks in advance for your help.

You have a number of options:
Use another Mac that is running Tiger, Snow Leopard, or Lion to configure the AirPort base station.
Use a PC to configure the AirPort base station
Use a utility like Pacifist to install AirPort Utility 5.6 on Mountain Lion. This article will tell you how:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

I presently use an older AirPort Extreme but my reception comes & goes does this occur with the new extreme?

I presently use an older AirPort Extreme but my reception comes & goes. Does this occur with the newer version?

1) If the reception comes and goes as a result of wireless interference from other sources in your home and around the home...other wireless networks in the neighborhood....or...nearby cordless phones.....then a new router is likely to experience the same issues. See this Apple support document for symptoms and fixes of wireless interference.
http://support.apple.com/kb/HT1365
2) If the reception comes and goes as a result of an aging power supply in the older AirPort Exteme or another component that is intermittently acting up, then a new router should take care of that.
What we cannot tell you is whether 1) or 2) applies to your situation. If possible, it would be good idea to take the older AirPort to an Apple Store or Apple Servicer....if you have one near you....to let them take a look.

How to replace a older Airport Extreme with a newer model? (OS 10.6 w/ Mac Mimi)

How do I replace a older Airport Extreme with a newer model? (Mac Mini OS 10.6.8 )

There is not much more to it than to buy a new one, and configure it using AirPort Utility.
You should be using AirPort Utility 5.6.1.
Power down your modem before removing your older Extreme and connecting the new one.

Older Airport Extreme with new Airport Express

I have a new Airport Express and an older Airport Extreme (I think 1rst gen). I have been using the Extreme for a few years now and just got the express to help me extend the extreme. The Extreme's signal is very weak in some parts of my house. I cannot hook the two together via ethernet. Needs to be wireless. What's the best method? I only use the wi-fi for internet access and tv (netflix, HBOGO, etc). I do not share printers or hard drives. I'm wondering if the new express is better (range) than my older extreme? Should I use the express as my main base station?

Your Extreme should still provide better overall range over the 2nd gen 802.11n AirPort Express Base Station, so I would still recommend that you leave the Extreme as your "main" router.
You will want to use the following instructions to extend the wireless network from this Apple Support article.
The key to success if extending the Extreme is to place the Express within a 25+ dB SNR range of the Extreme as it can only repeat the signal with the same bandwidth that it receives it. If the signal is very weak the Express may not even be able to extend it at all.
Check out the following AirPort User tip for details on optimal base station placement. Please post back your results.

Older airport extreme base station as a network extender with new time capsule

I just bought a new time capsule (802.11ac). Can my older airport extreme base station (model A1143) be used as a network extender with it?

Yes, although it maybe disappointing..
There are two kinds of extending.. wireless repeater type which is poorest as it has to transfer all packets in two steps instead of one.. hence will halve the speed.
Or using ethernet to the old extreme and set it in bridge.. You can then setup roaming network... this is much better.. but getting ethernet to the right place could be messy or expensive or both.
http://support.apple.com/kb/HT4260
wireless extend doco.. mind all of this is out of date.. the basics are correct.. the methods via the airport utility may be obsolete.
http://support.apple.com/kb/HT4145
Documentation has rather lagged lately.

Installing Airport Utility 5.6.1 in order to configure older Airport Extreme/g model doesn't work as it won't install with OS 10.8.5 Mountain Lion. Solution?

I need to configure Airport Extreme Base Station 802.11b/g but Airport Utility 6.3.1 will not work.
I found this page: http://support.apple.com/kb/HT5022
it recommends installing Airport Utility 5.6 which downloads as 5.6.1
but it will not install on Mountain Lion OS 10.8.5
so what to do?

AirPort Utility 5.6.1 is for Snow Leopard. Use 5.6 for Lion or Mountain Lion.
You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

Setting up network with newer and older AirPort Extremes

Okay, I thought this was going to be so simple. I have a newer (like a year old - square) Airport Extreme that I have three computers wirelessly hooked up to in the house. Great... so now, I want to hook up the old iMac in my son's room that doesn't have a wireless card to the network. It is too far away to use the ethernet cable into the back of my newer Airport Extreme station so I figured I'd dust off the old saucer type base station, plug the ethernet cable into that in my son's room and then just easily get the old base station to network with the newer one wirelessly.
Not so easy. The newer one has no reference how to make a network with other base stations whatsoever and the old book describes how to with the Airport Admin Utility which is not available to the newer version, just Airport Utility and it does not have the WDA options listed. I tried to extend the network and then Doh! The whole network disappeared.
Is this a compatibility issue with the older and newer base stations? Would it just be easier to put in a wireless card to my very old iMac, if that's even possible? Has anyone successfully networked an old and new base station together? If so how?
Thanks!

Welcome to the discussions!
When you have an older "g" device (the flying saucer) and a newer "n" device (the square one) in order for them to communicate using wireless only, you must configure both of them in what is known as WDS configuration.
This is a quite tricky setup for most users. The best set of instructions that I've seen for this comes from expert user Tesserax in this thread:
http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
If you elect to try this type of setup, you will probably need to hold down the option key on your Mac while you click on the Wireless Mode selection box to get the WDS option to appear. (My guess here is that Apple "hides" it because it slows down the network substantially). But, it's the only way to do what you want to accomplish with and old and new device.
Other options would include the wireless card you mentioned for the iMac. Even better might be a pair of ethernet powerline adapters. One adapter goes near the AirPort Extreme and the other near the iMac. The AC wiring in your home transmits the ethernet signal of the powerline. Works great, almost no configuration required and better than wireless in many cases.

Can I replace an older Airport Extreme with a newer one by importing configuration file

Can I import the configuration file from an older Airport base station into a newer replacement Airport base station? It would seem this would save me a lot of extra work. First, it would hopefully save time by automatically configuring the new base station without me having to fiddle with the settings. Second, it might hopefully save some more time if I would not have to re-enter the network parameters for all the devices currrently connected to my Airport (wi-fi) network.
Read on for more details.
My old Apple Airport Extreme Base Station (AEBS) is not a gigabit one. Moreover, it's been experiencing some hardware failures recently. So, I recently purchased a new Apple Airport Extreme (base station) that is a gigabit one (Model# ME918LL/A with 802.11ac Wi-FI). Now, I'd like to replace the older base station with this newer one with the MINIMAL amount of disruption and manual work possible.
Regards,
Tony

I relaced an older AEBS with the new one, recently, and did not need to import anything, but if you can save the configuration file from your old one, then you can import it to the new one. I've never tried that when I switched, and it didn't seem to matter which suggests the configuration file may be on disk somewhere.

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Windows 7 and Airport Extreme problems

I've switch the airport extreme a few months ago, from a linksys router. Ever since switch my pc laptop drops/loses the wireless connection. The PC is running Windows 7. I have taken the laptop to another place that has a wireless network and never lose a connection. It will connect fine, just every so often it will drop the connection.
However my MacBook Pro and PS3, both connected over the wireless network never lose connection. And I do a lot of online gamine and it works great. Can anyone point me in the right direction on fixing the problem?
Thanks

I'm having the same issue. My desktop pc keeps dropping the connection to my network (airport extreme router) while the rest of my devices (macbook pro, xbox, mac mini) still stay connected. The pc never had this issue prior to installing Windows 7 so im guessing there must be something with the Windows 7 OS.

Older Airport Extreme Problem

Similar Messages

Maybe you are looking for