Older Mac Pro and VISTA 64

I am having some issues. I just bought a old Mac Pro quad 2.66 OSX runs great of course but when I run bootcamp I can't install VISTA 64. Then I put VISTA 32 on and it is only seeing 2 of the 4 cores and only 2 gigs of memory. Is this correct? Id really like to run VISTA 64 what are my options? XP?
Thanks
randy

Randy,
I just ran into this issue a couple of days ago and I was able to get Vista 64 working flawlessly on my 2006 model Mac Pro. I assume you were able to get Vista installed and just need to get the bootcamp drivers and control panel on there. I was using a 10.5.6 retail DVD for this. As The Hatter mentioned, this disc has the needed drivers, but checks for the proper machine type before allowing the install. If you have a 10.5.6 disc from another source, I'm not sure if this will work or not. Here's what I did:
1. Insert Leopard Install DVD and wait for Vista to mount it. Close out any installer that may try to run.
2. In your start menu, find +Command Prompt+, but don't open normally. Hold down the SHIFT key and Left-click on +Command Prompt+ and select +Run as administrator+ from the menu that pops up.
3. Switch to the drive with the Leopard DVD. Mine is 'D', so I typed D: and the prompt changed to reflect that I was on the 'D' drive. If your DVD is at a different drive letter, use that one.
4. Change to the correct folder by typing *cd Boot Camp\Drivers\Apple*
5. Run the installer by typing BootCamp64.msi
This will run the full bootcamp installer, but bypasses the start.exe where the machine type check takes place. Let me know if this works for you or if you have any issues. I spent a few hours working on getting this to work, but I now have a working Vista 64 install. If I could only find a way to play Crysis at 2560x1600 all my problems would be solved. The 8800GT is not cutting it!

Similar Messages

  • I have used my older Mac Pro and now my new 2011 imac fo play the many movies and TV shows I have dowloaded. Great results. But I also have a lot of Blu Ray disks.

    I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
    But I also have a lot of Blu Ray disks.
    I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
    Thanks for your consideration.....

    I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
    But I also have a lot of Blu Ray disks.
    I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
    Thanks for your consideration.....

  • (Cross Post! SORRY!)  Having trouble with Mac Pro and Vista/Boot Camp

    I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
    Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
    BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
    Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
    Any help would be fantastic!!

    Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
    I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
    Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
    BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
    Anywho, if anyone can help me with my Vista problems, that'd be grand :P

  • Older Mac Pro users beware of Mountain Lion upgrade

    I work at a company where we have 6 edit suites. Five of those suites are still running Mac Pros; three of them are Early 2008 models, two are Early 2009 models. All of these suites have 30" monitors in them running at 2560 x 1600 resolution. The other suite has a new 27" iMac. All but one of the Mac Pros have their original graphics cards.
    When Mountain Lion first came out, I upgraded my Mac mini at home that has FCP7 and FCPX installed on it. Both applications ran fine and I was able to edit a project in FCPX with no problem. A co-worker who works remotely on a 27" iMac had also upgraded his machine and experienced no issues.
    Seeing no issues with the ability to run FCP7 under Mountain Lion, I proceeded with upgrading the MacPro suites at our office. After an initial test on one machine to confirm that FCP7 would load and launch projects, I proceeded to upgrade the remaining suites. It soon became apparent after other editors began to use their computers that FCP6 and 7 were affected by the upgrade to Mountain Lion.
    While the programs still work fine, one fundamental change that Apple has made in Mountain Lion is to push more of the responsibility for displaying the image on the computer monitor to the GPU of the graphics card. Previously these responsibilities were shared with the CPU. Therefore, if you have an older graphics card (even if it is fully compatible with FCPX, as ours are), FCP6/7 has a difficult time playing back 1080 video in the Canvas window (at any size), without breaking up when there is some degree of movement in the video image.The screen cannot refresh quickly enough to draw the video image without showing horizontal banding and some minor digital garbage.
    Rest assured that the render files are clean and the output file will be fine. Once exported, a self-contained .mov file will playback fine in Quicktime, showing no banding where there previously was banding when viewed in FCP. This is an issue with display only. If you can live with it, fine. But it is rather distracting while editing.
    I attempted to downgrade one of the Mac Pros to Lion earlier today. While I was able to successfully downgrade (not with a clean install, but another method), both FCP7 and FCPX would no longer launch because they were confused about which version of the OS was running. Using FCS Remover, I deleted both FCP7 and X, then reinstalled FCP7. Still no luck with launching FCP7. I finally decided to reinstall Mountain Lion for the time-being. FCP7 now launches again.
    Just a warning to those considering upgrading that you may experience performance issues with FCP6/7 if you are using an older Mac Pro and trying to edit 1080 footage. You may have to upgrade your graphics card to achieve best performance.

    Christian Castagna1 wrote:
    Yes, we previously we had purchased an ATI Radeon 5770 to enable use of FCPX, and 1080 video plays fine through that in both Early 2008 and Early 2009 models, although it is not fully compatible with those computers. Technically it is only compatible with Mid 2010 Mac Pros. It is unclear if there is a card that is fully compatible with Early 2008 computers and FCPX at this point.
    We have noticed some small pixelation around the edges of icons with the 5770 in an Early 2008, but that is intermittent and goes away with a restart. We have not noticed any issues in the Early 2009. We have also just purchased a Radeon 5870 and will be testing that in Early 2008 models to see if the same pixelation issue happens. We will install that card eventually in an Early 2009 computer because it is fully compatible with that machine.
    If nothing else, hopefully these graphics cards buy us a couple more years with our Mac Pros.
    Can you explain a little more about this please...  My primary system is a 2008 8X 3.2GHz system with a ATI Radeon 5770 and I have it running two 27" Samsung monitors and a 37" HDTV (all 1080p) on FCS3. None of the displays have any artifacts under any conditions. What are the compatibility issues? If I'm doing a no-no, I want to know before my next big project...

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • Cannot Complete Installation of Vista with Mac Pro and Boot Camp

    I only have one hard drive with my Mac Pro, and I partitioned the drive into two sections with boot camp and restarted with my Vista 64 bit Ultimate CD.
    I have tried formatting the partition with Vista and it still gives me the dreaded error message of "windows is unable to find a system volume that meets its criteria". I've tried deleting the partition during installation, and making a new partition with Vista, reformatting, then restarting the computer. Same message.
    I don't know what to do. I've tried like mad searching for topics like this one here, but every one of them deals with installing vista on a second dedicated hard drive on the Mac Pro. I only have one. How do I get this to work?
    Please help if you can. I would REALLY appreciate it. I'll be watching the thread. Thank you!!

    Loyalty4Life wrote:
    Thank you for your reply! I'll be here all night.
    I have the 3GHz Dual-Core Intel Xeon processors. I tried installing Vista ultimate with my 32 bit software, but I still get the same message (I own both legally, btw).
    Thanks for your help.
    Several things to do:
    Run OS-X Disk utility and repair the disk if necessary, and file permissions.
    Be sure your HD has the GUID partition scheme and if it has SMART that it's OK
    Zap the PRAM
    Be sure you are logged in as administrator when creating the BC partition and starting the installation of Windows from Leopard
    When I installed Vista Ultimate 64-bit, I was using BootCamp beta, 1.2 or 1.3. I created the partition with BootCamp Assistant.app as you did. It's a 60GB partition that I formatted with NTFS with BC.
    After starting the install in Tiger, I then simply inserted the Vista 64-bit DVD and that was it.
    It just installed.
    Ditto with XP-Pro on my other MBP. Zero problems with BC. It was also done with a beta, BC1.0.
    I have never installed Windows using Leopard. When I updated to Leopard from Tiger nothing changed, but there seem to be more problems with Leopard and BC2.0 than there were with Tiger and the beta versions.
    There are no requirements about legality until after the OS is installed, so that's a moot point.
    There are some install DVDs that are in ISO format and they won't work, but it seems that yours is working but not finding a suitable volume.
    You might try reformatting the BC partition with BootCamp assistant as FAt32 and seeing if that works, but you are limited to 32GB if you do that, but it would be a good test. Vista should then format it into NTFS.
    Be sure that your Leopard OS is fully backed up because stuff happens when you keep fooling around with partitions.
    Also look through this forum for similar problems.

  • 27 LED monitor and older Mac Pro compatability

    Will the new monitor work with older Mac Pro's?

    Why does the Apple store list the ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro as only the Early 2008 & Early 2009 models?
    Only Apple knows, but the comments section, and many posts here, show it works in any Mac Pro/
    I'd like to use the new 27" LED with my original 2006 Mac Pro 1,1. I currently have the NVIDIA GeForce 7300 GT.
    You can use it with the dual-link DVI port (only one port is dual-link) on the NVIDIA GeForce 7300 GT with a converter
    <http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Po wered.html>
    The ATI Radeon HD 5770 Graphics Upgrade Kit says it's only compatible with the Mid 2010 version.
    There are reports that it also will work in any Mac Pro.
    <http://blog.macsales.com/6856-owc-reveals-which-radeon-video-cards-work-with-20 06-2009-mac-pros>
    OWC says the Mini DisplayPorts didn't work, but that doesn't appear to be true:
    <http://discussions.apple.com/message.jspa?messageID=12165151#12165151>
    For three DVI displays, you need dual-link adapters
    <http://support.apple.com/kb/HT4279>

  • Updating your older Mac Pro for a few more years of good use...

    Hello everyone, I wanted to share my tips for getting your aging Mac Pro running better for Mavericks and the FCPX 10.1.
    Please note your Mac Pro's specs before doing what did..I am an editor and use the 3 big A's to get my work done. Adobe, Apple, Avid (not so much Avid)
    I got a great deal on it for only $1300. I did a bunch of research and decided my upgrade options were best for my machine and the way I use it so your upgrade options my differ slightly. (do your research!!!)
    I have 2009 Nehelem Mac Pro 2x 2.66 Ghz Quad-Core Intel Xeon.  Installed was 6GBs of factory RAM, an upgraded ATI 512 GPU, and 1,  1TB WD Black system drive. (this was a nice upgrade compared to my 4 core Mac Pro)
    I was running 10.8 and all my apps were installed and running. I installed 3 more 7200rpm drives to fill the drive bays. Momentus XT's 2TB each.
    (I upgraded to Mavericks, as  you know it overwirtes the old OS, I wanted the new FCPX...) more on this later.
    1- RAM,
    I removed the puny 6GBs of RAM it came with and installed 32GBs of 1066 Mhz DDR3 from OWC. I decided 32 would be enough for my needs looking into the App requirments and of course the cost. I noticed a slight difference in some performance. (to my dissapointment) fcpx beachballs!!
    However now you will have more RAM to allocate RAM for programs that can read it. After Effects anyone...
    link- http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
    2-GPU,
    I had a 5770 sitting in the closet, and put that in and bascilly it sucked!   I never like the 5770.  fcpx beachballs!!
    I contacted apple they informed me FCPX is written for GPUs and that a large card (while they didnt suppport it at the time) would be the best upgrade to better performance. So I installed the AMD Sappire 7950 3GB GPU from OWC. This is a monster card! and right away I noticed a huge difference in the perfromace of FCPX and AE! Not only that but the card supports up to 2K I believe... and is a great price... and for you gear heads it looks bad *** and the fan is super quiet!
    less fcpx beachballs
    link-http://eshop.macsales.com/item/Sapphire/100352MAC/
    3- Hardrive,
    Ok so now I'm thinking my machine is a beast! I have all this RAM and a huge GPU and the top ESATA drives you can buy, butI was still getting beachballs and FCPX was painfully slow at times..needless to say I felt Apple backing my in a corner to drink more coolaid a get the new small round black can...What to do???
    As I mentioned before I did not do a clean install....Most folks dont like going through the pain of 2 days to do a clean install but I knew deep down it would have ot be done. Before I did that I decided to do some research on those new SSD cards everyone is raging about. Remeber your Mac Pro's bus speed is only so big...remember this when doing this last and most important upgrade!!
    The market has all kinds of SSD drives for sale and OWC has a PCIe option (too much money for me) they have 3G drives 6G drives and so on. I could be wrong but buying a more expensive 6G card is a waste of money with bus speed of the Nehelem (this my differ with Westmere) I bought an of the self Kingston Hyper X 120GB (get at least 240GB if you can) and the OWC Mac Pro Drive Sled.
    This by far was the best upgrade! Before installation please go through the pain of the clean install...For Mavericks you need to create a bootable drive on a USB stick first. You then need to monut SSD in an empty enclosure in order to get it to mount for the OS to be installed
    OSX install Instructions-http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
    link- Drive Sled http://eshop.macsales.com/item/Other%20World%20Computing/MMP35T25/?utm_source=go ogle&utm_medium=shoppingengine&utm_campaign=googlebase&gclid=COyxzMyOub0CFcqUfgo d8xUAPQ
    kin
    link-SSD http://www.kingston.com/en/ssd/hyperx
    PCIe Expansions
    H.264 Encoding-
    Matrox Compress HD PCIe card, This card is amazing however it does not support Compressor 4.1 but it does support legecy Compressor 3 and I did successfully install both Apps in Mavericks. (You must hide legecy versions in a folder in applications)
    ESATA CARD-  4 Port 6G Caldigit esata card.
    USB 3.0- Newertech 2 port USB3.0 Mac Pro Card. I dont recommend buying this card. Mac Pro Nehelem, was not made for USB3.0 and the drives I plug into it rarely mount...if ever mount... restart...when they do its a little faster than firewire and close to my Esata options. Dont bother....
    I have setup my drive structure as follow.
    Drive Bay 1 All System Apps run on the SSD drive.
    Drive bay 2 hold the contents of all the Media for my projects.
    Drive bay 3 hold all the AutoSaves and the FCPX Libaries and daily Project backups and renders.
    Drive bay 4 Is Special Effects drive.
    Dual Samsung 27 inch HD displays
    M_Audio Monitors
    1-3TB Caldigit RAID
    12-TBs of drives attached to every port on the back.
    2_USB docking ports voyager s3 for archive drives.
    Now that I have all these upgrades, a clean install, fresh updates to my softwares, my Mac Pro runs better that ever! My boot ups time is twice as fast as before and my OS is very snappy...Oh yeah FCPX, After Effects, Boris RED, Mail, Safari all open at the same time a running brilliantly!
    Many of us are not ready to upgrade to the new Mac Pro, and as we all know the legecy Mac Pro was built like a tank with military grade proccessors and endless upgrade options. It wont ever be as fast as that new black can but I know I will be working faster with my trusty Mac!
    Good luck!
    basementape films

    SSD Killer-fast Mac Pro
    Upgrade RAM to 16GB (4 x 4GB)
    Upgrade all the hard drives to 2TB
    Upgrade to 10.6.8 and CS5.5
    Replace graphic card with ATI 5770
    Upgrade the processors with X5355s, which is what many are doing now with theirs.
    Forget Lion. Dropped PowerPC and Rosetta code support
    Clone your drives.
    Keep 40% or more free space on any drive.
    Move any non-OS or applications off the boot drive to a data drive.
    Move system and apps to SSD
    Use SSD(s) for Aperture Library or stripe RAID.
    None of the above, sell yours and pick up a 2010 2.8GHz $2100 (people that want or need to run Tiger and PowerPC will likely pay $700 range for MacPro1,1). Upgrade the processor in  2010, with 6-core 3.33GHz $590.
    Apple Special Refurbished Mac Pro 2.8GHz Quad
    Intel Xeon W3680 3.33 GHz, SLBV2
    Intel Xeon UP W3680 3.33 GHz Processor - Hexa-core
    W3670 Upgrade photos
    At some point, it doesn't make sense to pour money into older system.
    But you can, and do it gradually one step at a time.

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion.  There is a step that asks for a "passcode" to proceed.  I have no idea what that passcode is.  It seems to want a numeric code.

    I am trying to do a migration transfer from an older Mac Pro, running Leopard, to a newer Mac Pro, running Lion.  There is a step that asks for a "passcode" to proceed.  I have no idea what that passcode is.  It seems to want a numeric code.  Has anyone had this experience?

    This general-purpose article gives detailed step-by-step instructions for using Migration assistant, Setup Assistant, and other mehtods, and discusses the Pros and cons of each mtheod. It is very approachable and easy to understand. Wriiten by Pondini, the resident Time Machine guru.
    Setting-up a new Mac from an old one, its backups, or a PC

  • Top two best video cards for older Mac Pros?

    I have some older Mac Pro towers that vary from:
    2.66 GHz Quad Core Intel Xeon
    ..to this:
    2 x 2.93 GHz 6 Core Intel Xeon
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME. I just need to narrow down the unwieldy list that can be found here: http://www.adobe.com/products/premiere/tech-specs.html

    MikeJamesG wrote:
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME.
    Are you adverse to using aftermarket cards that have been converted to work properly in a Mac?  If you aren't, then I'd recommend talking to Dave @ MacVidCards because he can cook you up an nVidia 700-series card that will boot properly in a Mac Pro, run at PCI-E 2.0 speeds, and work wonderfully in Pr/AME.

  • Boot camp, MAC pro and windows XP

    Hi,
    I am leading a programmers team, what we want is the faster machines to improve performance. Currently investigating an HP machine with windows XP 64 on it. But that doesn't work for us as most of hour programming tools do not work under XP 64. We cannot install 32 bit Windows because of the 2 Quad cores in the machines (according to IT).
    Solution could be MAC pro, same specs (2 quad cores and 4 GB internal memory ) but with Boot Camp I can install XP 32. Or am I wrong? Or will MAC pro with XP 32 do not give an performance increase we can expect with 8 core?
    Robert

    Hi Robert,
    for the IT guys: XP Prfessional does support up to 2 processors with multiple cores each.
    XP Home does only support one processor with multiple cores.
    The main problem with Mac Pro and 32-bit Windows XP or Vista (and possibly with the HP machine, too) is, that because the expansion slots are reserving quite some parts of RAM for their own Range of Adresses (even if no expansion card is in them) from the 4GB of RAM you will only get about 2GB for XP Pro 32-bit to see and use.
    Only chance to use the full amount of RAM is 64-bit Windows and then Vista is the one to use, because Apple does not provide any drivers for XP-64 bit.
    Regards
    Stefan

  • Going between Mac Pro and G4 laptop

    Hi - I am needing to go out of town for a month and I need to keep working as business as usual with my system. In the past, I would clone my older G4 tower system drive to my G4 Powerbook and then back again when I returned home. This worked perfectly.
    (Using 10.5.7)
    Recently I upgraded to a Mac Pro and I know that with the Intel processor I cannot clone back and forth anymore since my Powerbook is a G4.
    How can I keep my computer, mostly Mail, Dreamweaver and iCal, synced so I can keep my workflow with a good transition? My data is on a separate external drive that travels with me. I'm not worried about applications as I still have them installed on my Powerbook pretty much in the same way as my MP is set up.
    #1 - I really need to have all of my Mail accounts (pop3) data - the sent and received messages - to be duplicated between the two systems before I leave and then when I return to the MP system. My Dreamweaver account settings would be important as well since I need to manage about over 100 different accounts and it helps to keep them current as I am frequently adding and editing account login data.
    Suggestions?

    If you copy the entire user folder you will also copy the /Home/Library/ folder. Although this isn't necessarily a problem, if you have PPC plug-ins for contextual menus, preference panes, or input managers they will no longer work on an Intel machine. You would need to replace them with universal binary versions for compatibility. For more about migration from a PPC see the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • Good wireless cards for older Mac Pros

    I have a Mac Pro Dual-Core Intel Xeon 2.66 GHz at work that we are trying to get online wirelessly. A couple of months ago, we bought a Hawking Hi-Gain Wireless-N USB Adaptor, which was working fine until a recent update was performed. Since then, the computer crashes almost immediately if the wireless adaptor is plugged in, but runs fine when it is taken out. I am curious if anyone else has run into a similar problem when using a wireless adaptor. I also wanted to know if anyone had a recommendation for a different, reliable wireless card for an older Mac Pro.
    Thanks in advance.

    I have almost the exact same situation.
    Same system, a d-link wua 1340 usb wireless adaptor.
    Worked fine for several weeks or so until i updated to snow leopard.
    Now frequent system crashes, grey screen and the box that tells me to use the power button to shut down.
    I tried going back to 10.5 and still the same problem.

  • Mac benchmarks: iMacs vs older Mac Pro towers

    I've been having a great discussion in a PPro Facebook group regarding new editing systems; I have a limited budget for 3 new Macs in our company and I feel confident about purchasing a new Mac Pro (for PPro, AE, color correction and finishing work) and 2 iMacs with Thunderbolt RAIDs (just for editing with PPro).
    I'm curious though: when I look at the Geekbench scores for the latest Mac models there are older Mac Pros (2009 - 2013) that seem to outperform the newest iMacs in 64-bit multicore performance. The single core performance has the iMacs coming out on top (I'm only looking at the 27" retina, not the new 5K model). So which score is more indicative of performance while editing with Premiere Pro? I've heard from editors who say their new iMacs run circles around the older towers they replaced so I'm inclined to believe that a new iMac would feel faster than even the last silver Mac Pro tower (2012); but a 12-core beast with a beefy GPU has got to be a serious contender when it comes to intense multiprocessing tasks.
    I know that there a lot of factors that determine overall "speed" (GPU, RAM, storage speed) so it won't always be an easy 1:1 comparison with these models. I just want to make sure I'm investing in the right hardware and very curious as to how these benchmarks translate into real world Premiere Pro performance.
    TIA,
    JVK

    jvknowles wrote:
    I'm inclined to believe that a new iMac would feel faster than even the last silver Mac Pro tower (2012); but a 12-core beast with a beefy GPU has got to be a serious contender when it comes to intense multiprocessing tasks.
    There's a lot involved in this comparison, such as:
    CPU core count and speed
    GPU capacity
    Storage speed
    The old Mac Pros are excellent rigs, but limited to SATA2 storage speeds, and their Xeons don't have Intel's AVX available, which will speed things up a bit.  One advantage they do have is an open catalog of AMD or nVidia GPUs, assuming you can get them powered by the internal connectors.  The new Pros are AMD-only, though the advantage is that they have 2 GPUs versus 1.
    Comparatively, the new iMac with its desktop Core i7 processor will be able to push faster GHz, and it also has Intel's QuickSync tech available (hardware h.264 encoding).  So if you're doing a lot of output with h.264, you'll see a bit of a kick in the *** with those.  The limitations?  The GPUs aren't as capable as the ones in the nMP now.  And you only have access to a single GPU, where the new Pro has 2.  But, if you're not doing any work that can be off-loaded to the GPUs, it won't matter.
    As Eric mentions: AE is all CPU, all the time.  It wants cores and GHz.  It'll make your machine cry, regardless of what it is.

Maybe you are looking for