OLE Control, Oracle 8.1.7 Disconnect
We are using an OLE Custom Control (OCX) to embed a Visual C++ / ActiveX control in a PB 8.0.1 application.
When connecting to Oracle 8.1.7, the PB 'Disconnect;' statement causes a PB/Windows memory reference error ('The instruction at "0x77f83a33" referenced memory at "0x00000010". The memory could not be "read".) and shuts down the application (and Powerbuilder if running). This occurs only after loading the OLE control and establishing an ODBC connection for the
control. The crash occurs when executing the 'Disconnect;' statement or when the application closes (default disconnect?).
This problem does not occur with Oracle 8.1.6 or with Sybase 12 databases connections.
We recently upgraded from PB6.5 to PB8, since PB6.5 did not support Oracle 8.1.7. However, the upgrade did not make the problem go away. We have tried destroying the control, etc before disconnecting but to no avail.
Any ideas? Thanks in advance.
All sql commands including those used for database administration are in the SQL Reference Guide (not SQL*Plus).
For other topics, it would depend on what it was you were looking for, the are different volumes on Administration, Reference (init parameters and data dictionary), Tuning, Backup, etc.
The site makes a couple of references to downloading, but don't worry about it, just follow the links and select HTML versions and you will eventurally get there. There is also a search engine available http://otn.oracle.com/pls/tahiti/tahiti.homepage that will allow you to search by topic.
Similar Messages
-
OLE Controls in Oracle Forms 6
Env: Oracle 8xi, Forms 6, Attachmate Infoconnect OCX, Windows 2000
Hey All,
I am looking for general information on using Oracle Forms PL*SQL Library
for OLE2 to access and utilize a 3rd party Ole Control. I have a short-term
gig doing this and with the exception of how to utilize the properties and
methods of a 3rd Party OCX, I am a fish out of water when it comes to Oracle
development. I can embedded and utilize the control in VB and VC++ with no
problems but I need some help on how to embedded an OCX into an Oracle Form
and instantiate and use it through PL*SQL and the Oracle OLE2 Library. There
is no documentation on how to do this with Oracle from Attachmate. According
to Oracle you can use a 32 bit OCX in an Oracle form. I just need
a little help on how to do it.Any code snippets, book reccommedations, sites, or advice as to where to
look would be helpful.
Additionally, I am looking for anyone who has specific experience in using
Attachemate's Infoconnect OCX. Any info you could share would be
appreciated. Thanks for any help you can provide!
Vince
nullHi,
Thanks for your info. I tried that. But i could not complete. It gives me compilation errors.
If you have any sample apps. can u forward it to me?
Balaji -
ORACLE instance terminated. Disconnection forced
Hi,
When I am trying to login , it is throwing "ORACLE instance terminated. Disconnection forced"
Below is the message logged in ALERT Log
Completed: ALTER ROLLBACK SEGMENT RBSL1 OFFLINE
Sun Jun 23 00:42:35 2013
Errors in file D:\HA_salesupp\Dump_files\ssdtCKPT.TRC:
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\HA_SALESUPP\CONTROL_FILES\SSDT2.CON]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because
another process has locked a portion of the file.
Sun Jun 23 00:42:36 2013
Errors in file D:\HA_salesupp\Dump_files\ssdtCKPT.TRC:
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\HA_SALESUPP\CONTROL_FILES\SSDT2.CON]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because
another process has locked a portion of the file.
Sun Jun 23 00:42:36 2013
CKPT: terminating instance due to error 221
Sun Jun 23 00:42:39 2013
Errors in file D:\HA_salesupp\Dump_files\ssdtDBW0.TRC:
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
Sun Jun 23 00:42:39 2013
Errors in file D:\HA_salesupp\Dump_files\ssdtPMON.TRC:
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
Instance terminated by CKPT, pid = 78
Please let me know whether I can directly start the services using "net start <myservicesName>" or any other steps need to be followed.I could see the Oracle Instance is running in the services.msc but when I am trying to connect it throwing "ORACLE instance terminated. Disconnection forced". As I am not able to connect, I was not able to query v$instance.
Below are the log file CKPT.TRC and DBW0.TRC
CKPT.TRC
Dump file D:\HA_salesupp\Dump_files\ssdtCKPT.TRC
Sun Jun 23 00:42:35 2013
ORACLE V8.1.7.2.1 - Production vsnsta=0
vsnsql=f vsnxtr=3
Windows NT Version 4.0 Service Pack 6, CPU type 586
Oracle8i Release 8.1.7.2.1 - Production
JServer Release 8.1.7.2.1 - Production
Windows NT Version 4.0 Service Pack 6, CPU type 586
Instance name: ssdt
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 78, image: ORACLE.EXE
*** SESSION ID:(4.1) 2013-06-23 00:42:35.748
*** 2013-06-23 00:42:35.748
ksedmp: internal or fatal error
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\HA_SALESUPP\CONTROL_FILES\SSDT2.CON]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because
another process has locked a portion of the file.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
_ksedmp+a8 CALLrel _ksedst+0
FBEBCC
_kccwbp+369 CALLrel _ksedmp+0 2
_kccpcp+92 CALLrel _kccwbp+0
0276BC
E026600
26 7
_kctrcp+309 CALLrel _kccpcp+0 1
13BF770
_kcvcca+182 CALLrel _kctrcp+0
_ksbcti+88 CALLreg 00000000
_ksbabs+1af CALLrel _ksbcti+0
810E8
DFBEF54
_ksbrdp+1b6 CALLreg 00000000
3BF908
_opirip+234 CALLrel _ksbrdp+0
_opidrv+549 CALLrel _opirip+0 32 0
0
_sou2o+19 CALLrel _opidrv+0
_opimai+152 CALLrel _sou2o+0
FBFE30
32 0
0
_BackgroundThreadStart@4+127 CALLrel _opimai+0 3
DFBFF7C
77F04EDB CALLreg 00000000
----- Argument/Register Address Dump -----
Argument/Register addr=dfbebcc.
----- End of Call Stack Trace -----
===================================================
Files currently opened by this process:
===================================================
PROCESS STATE
Process global information:
process: 6a006c8, call: 6a2d51c, xact: 0, curses: 6a0e6f8, usrses: 6a0e6f8
SO: 6a006c8, type: 1, owner: 0, pt: 0, flag: INIT/-/-/0x00
(process) Oracle pid=5, calls cur/top: 6a2d51c/6a2d51c, flag: (2) SYSTEM
int error: 0, call error: 0, sess error: 0, txn error 0
(post info) last post received: 0 0 13
last post received-location: ksasnd
last process to post me: 6a01368 5 0
last post sent: 67 0 4
last post sent-location: kslpsr
last process posted by me: 6a01368 5 0
(latch info) wait_event=0 bits=0
Process Group: DEFAULT, pseudo proc: 6a094e4
O/S info: user: SYSTEM, term: NTS4_005, ospid: 78
OSD pid info: 78
SO: 6a65ac4, type: 9, owner: 6a006c8, pt: 0, flag: INIT/-/-/0x00
(broadcast handle) flag: (2) ACTIVE SUBSCRIBER, owner: 6a006c8,
event: 4, last message event: 9, messages read: 1
channel: (6a6608c) scumnt mount lock
scope: 101, event: 9, last mesage event: 9,
publishers/subscribers: 0/7,
messages published: 1
SO: 6a0e6f8, type: 3, owner: 6a006c8, pt: 0, flag: INIT/-/-/0x00
(session) trans: 0, creator: 6a006c8, flag: (51) USR/- BSY/-/-/-/-/-
DID: 0001-0005-00000003, short-term DID: 0000-0000-00000000
txn branch: 0
oct: 0, prv: 0, user: 0/SYS
last wait for 'control file parallel write' blocking sess=0x0 seq=11662 wait_time=1
files=2, blocks=2, requests=2
SO: 6a65b3c, type: 9, owner: 6a006c8, pt: 0, flag: INIT/-/-/0x00
(broadcast handle) flag: (2) ACTIVE SUBSCRIBER, owner: 6a006c8,
event: 5, last message event: 5, messages read: 0
channel: (6a65fac) system events broadcast channel
scope: 101, event: 13, last mesage event: 0,
publishers/subscribers: 0/7,
messages published: 0
SO: 6a2d51c, type: 2, owner: 6a006c8, pt: 0, flag: INIT/-/-/0x00
(call) sess: cur 6a0e6f8, rec 0, usr 6a0e6f8; depth: 0
===================================================
CURRENT SESSION'S INSTANTIATION STATE
current session=6a0e6f8
******************** Cursor Dump ************************
Current cursor: 0, pgadep: 0
Cursor Dump:
End of cursor dump
END OF PROCESS STATE
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\HA_SALESUPP\CONTROL_FILES\SSDT2.CON]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because
another process has locked a portion of the file
dbw0.trc
Dump file D:\HA_salesupp\Dump_files\ssdtDBW0.TRC
Sun Jun 23 00:42:39 2013
ORACLE V8.1.7.2.1 - Production vsnsta=0
vsnsql=f vsnxtr=3
Windows NT Version 4.0 Service Pack 6, CPU type 586
Oracle8i Release 8.1.7.2.1 - Production
JServer Release 8.1.7.2.1 - Production
Windows NT Version 4.0 Service Pack 6, CPU type 586
Instance name: ssdt
Redo thread mounted by this instance: 1
Oracle process number: 3
Windows thread id: 33, image: ORACLE.EXE
*** 2013-06-23 00:42:39.404
*** SESSION ID:(2.1) 2013-06-23 00:42:37.966
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA -
While startup ora -01092: ORACLE instance terminated. Disconnection forced
Hi all,
I'm using Enterprise Linux Red hat 5 (OS), oracle 10g Release 2 (10.2.0.1.0)
while startup the database I'm getting below error message.
SQL> startup pfile='/opt/oracle/admin/ssharp/pfile/init.ora.33201013513' mount;
ORACLE instance started.
Total System Global Area 2147483648 bytes
Fixed Size 1220432 bytes
Variable Size 486539440 bytes
Database Buffers 1644167168 bytes
Redo Buffers 15556608 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
In alert log file having message, Redo log file s corrupted.
I try to recover the redo log,using
allow_resetlogs_corruption=True parameter in pfile.
and start the DB in mount stage,and
restore database;
alter database open resetlogs;
Using this method i got the same error ora - 01092
and tried to rman incomplete recovery i cant solve issue
*RMAN> run
2> {
3> set until sequence 2284 thread 1;
4> restore database;
5> recover database;
6> alter database open resetlogs;
7> }
executing command: SET until clause
using target database control file instead of recovery catalog
Starting restore at 25-APR-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=761 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=760 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=758 devtype=DISK
creating datafile fno=20 name=/northeast/oradata/ssharp/main/main03.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/25/2011 13:42:35
ORA-01119: error in creating database file '/northeast/oradata/ssharp/main/main03.dbf'
ORA-27038: created file already exists
Additional information: 1
RMAN> shut immediate
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, connect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, library, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rman, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, validate"
RMAN-01008: the bad identifier was: shut
RMAN-01007: at line 1 column 1 file: standard input*
and also i cleared that redolog content,after that also i tried to up the database with resetlog option.but i can't solve...
can any one guide me
Thanks in advanceHi user;
Please see below note which could be helpful on your issue:
database not starting up with errors ORA-01092 ORA-24324 ORA-01041 [ID 779356.1]
Regard
Helios -
Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size 4737560 bytes
Variable Size 2952791528 bytes
Database Buffers 1.2415E+10 bytes
Redo Buffers 26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name: AIX
Node name: INS1
Release: 1
Version: 7
Machine: 00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot... -
ORA-01092: ORACLE instance terminated. Disconnection forced
Hi Friends,
Here I'm getting this error when I start oracle database.
ORA-01092: ORACLE instance terminated. Disconnection forced
OS is windows XP pro DB 9iR2. The extract from alert log is as follows...
Sun Feb 11 07:53:41 2007
ORACLE V9.2.0.1.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 , CPU type 586
Sun Feb 11 07:53:41 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.1.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 50331648
large_pool_size = 8388608
java_pool_size = 33554432
control_files = E:\oracle\oradata\test\CONTROL01.CTL, E:\oracle\oradata\test\CONTROL02.CTL, E:\oracle\oradata\test\CONTROL03.CTL
db_block_size = 4096
db_cache_size = 33554432
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 8
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 900
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = test
dispatchers = (PROTOCOL=TCP) (SERVICE=testXDB)
job_queue_processes = 10
hash_join_enabled = FALSE
background_dump_dest = E:\oracle\admin\test\bdump
user_dump_dest = E:\oracle\admin\test\udump
core_dump_dest = E:\oracle\admin\test\cdump
sort_area_size = 524288
db_name = test
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 16777216
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Sun Feb 11 07:53:47 2007
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Sun Feb 11 07:53:48 2007
alter database mount exclusive
Sun Feb 11 07:53:53 2007
Successful mount of redo thread 1, with mount id 1912378892.
Sun Feb 11 07:53:53 2007
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Sun Feb 11 07:53:53 2007
alter database open
Sun Feb 11 07:53:54 2007
Beginning crash recovery of 1 threads
Sun Feb 11 07:53:54 2007
Started first pass scan
Sun Feb 11 07:53:54 2007
Completed first pass scan
2018 redo blocks read, 177 data blocks need recovery
Sun Feb 11 07:53:54 2007
Started recovery at
Thread 1: logseq 6, block 3, scn 0.0
Recovery of Online Redo Log: Thread 1 Group 2 Seq 6 Reading mem 0
Mem# 0 errs 0: E:\ORACLE\ORADATA\TEST\REDO02.LOG
Sun Feb 11 07:53:55 2007
Ended recovery at
Thread 1: logseq 6, block 2021, scn 0.310811
177 data blocks read, 177 data blocks written, 2018 redo blocks read
Crash recovery completed successfully
Sun Feb 11 07:53:56 2007
LGWR: Primary database is in CLUSTER CONSISTENT mode
Sun Feb 11 07:53:56 2007
ARCH: Evaluating archive log 3 thread 1 sequence 4
ARCH: Beginning to archive log 3 thread 1 sequence 4
Creating archive destination LOG_ARCHIVE_DEST_1: 'E:\ORACLE\ORA92\RDBMS\ARC00004.001'
ARCH: Completed archiving log 3 thread 1 sequence 4
Sun Feb 11 07:53:57 2007
LGWR: Primary database is in CLUSTER CONSISTENT mode
Thread 1 advanced to log sequence 7
Thread 1 opened at log sequence 7
Current log# 3 seq# 7 mem# 0: E:\ORACLE\ORADATA\TEST\REDO03.LOG
Successful open of redo thread 1.
Sun Feb 11 07:53:57 2007
SMON: enabling cache recovery
Sun Feb 11 07:54:02 2007
Undo Segment 1 Onlined
Undo Segment 2 Onlined
Undo Segment 3 Onlined
Undo Segment 4 Onlined
Undo Segment 5 Onlined
Undo Segment 6 Onlined
Undo Segment 7 Onlined
Undo Segment 8 Onlined
Undo Segment 9 Onlined
Undo Segment 10 Onlined
Successfully onlined Undo Tablespace 1.
Sun Feb 11 07:54:02 2007
SMON: enabling tx recovery
Sun Feb 11 07:54:02 2007
Database Characterset is WE8MSWIN1252
Corrupt block relative dba: 0x00406ecc (file 1, block 28364)
Bad check value found during buffer read
Data in bad block -
type: 6 format: 2 rdba: 0x00406ecc
last change scn: 0x0000.0004668b seq: 0xb flg: 0x04
consistency value in tail: 0x668b060b
check value in block header: 0x27f5, computed block checksum: 0x80
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x00406ecc (file 1, block 28364) found same corrupted data
Sun Feb 11 07:54:10 2007
Errors in file e:\oracle\admin\test\bdump\test_smon_564.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 28364)
ORA-01110: data file 1: 'E:\ORACLE\ORADATA\TEST\SYSTEM01.DBF'
Sun Feb 11 07:54:10 2007
Errors in file e:\oracle\admin\test\udump\test_ora_2012.trc:
ORA-01578: ORACLE data block corrupted (file # 1, block # 28364)
ORA-01110: data file 1: 'E:\ORACLE\ORADATA\TEST\SYSTEM01.DBF'
Sun Feb 11 07:54:10 2007
Error 1578 happened during db open, shutting down database
USER: terminating instance due to error 1578
Instance terminated by USER, pid = 2012
ORA-1092 signalled during: alter database open...
What I can guess is this all is happenning because system datafile OS block got currupted....is it so or some other reason?....and how to resolve this issue?Hi,
Since it is system tablespace, you can't open the DB. If you can't open the db you can't use dbms_repair. Also DBV doesn't change the content of the file so that also not going to help.
So only open left is to do point in time recovery.
Regards,
Satheesh Babu.S -
ORA-01092: ORACLE instance terminated. Disconnection forced !!1
ORA-01092: ORACLE instance terminated. Disconnection forced
I am getting the above error message when I try to start the database.
Please advise.
From
PI used following character set :
CREATE DATABASE GAV
LOGFILE GROUP 1 ( '/dbms/gavdb/GAV/redoGAV02.log') SIZE 150M,
GROUP 2 ( '/dbms/gavdb/GAV/redoGAV01.log ') SIZE 150M
MAXDATAFILES 256
MAXINSTANCES 1
MAXLOGFILES 62
MAXLOGMEMBERS 5
MAXLOGHISTORY 1600
CHARACTER SET "US7ASCII"
NATIONAL CHARACTER SET AL16UTF16
DATAFILE '/dbms/gavdb/GAV/system_ts001f01.dbf' SIZE 500M REUSE
Default Temporary TABLESPACE TEMP01 TEMPFILE '/dbms/gavdb/GAV/temp_ts001f01.dbf'
SIZE 1024M REUSE, '/dbms/gavdb/GAV/temp_ts001f02.dbf' SIZE 1000M
REUSE
UNDO TABLESPACE undotsp
DATAFILE'/dbms/gavdb/GAV/undo_01.dbf' SIZE 200M REUSE
From
P -
Database creation // ORA-01092: ORACLE instance terminated. Disconnection f
hi',
i am trying to create a new database on my fedora 8 system (personal desktop not a remote system) using oracle 10g. But as soon
as i use script to create the database i get " ORA-01092: ORACLE instance terminated. Disconnection forced" error.
following information will help you analyse the problem. i am writing down all the steps i am doing and sending the alertlog file as well. i also have created all the folder's required for new database.
logging to terminal:
$ export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
$ export ORACLE_SID=vc1
$ export LD_LIBRARY_PATH=$ORACLE_HOME/lib
[oracle@localhost ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jan 5 17:14:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> STARTUP NOMOUNT PFILE='/u01/app/oracle/product/10.2.0/db_1/dbs/initvc1.ora'
ORACLE instance started.
THEN I AM RUNNING FOLLOWING SCRIPT
SQL> create database vc1
2 user sys identified by varun
3 user system identified by varun
4 maxinstances 1
5 maxloghistory 1
6 maxlogfiles 5
7 maxlogmembers 5
8 character set US7ASCII
9 national character set AL16UTF16
10 datafile 'u01/app/oracle/oradata/vc1/system01.dbf' size 500M
11 extent management LOCAL
12 SYSAUX datafile '/u01/app/oracle/oradata/vc1/sysaux01.dbf' size 500M
13 DEFAULT TEMPORARY tablespace temp01
14 tempfile '/u01/app/oracle/oradata/vc1/temp01.dbf' size 100M
15 UNDO tablespace undotbs_01
16 datafile '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
17 DEFAULT tablespace users
18 datafile 'u01/app/oracle/oradata/vc1/user01.dbf' size 100M
19 LOGFILE group 1
20 ('/u01/app/oracle/oradata/vc1/redo01.log') size 100M,
21 group 2
22 ('/u01/app/oracle/oradata/vc1/redo02.log') size 100M;
create database vc1
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
****THIS IS MY ALERTLOG FILE***
Sat Jan 5 17:16:20 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_target = 197132288
control_files = /u01/app/oracle/oradata/vc1/control01.ctl, /u01/app/oracle/oradata/vc1/control02.ctl, /u01/app/oracle/oradata/vc1/control03.ctl
db_block_size = 8192
compatible = 10.2.0.1.0
log_archive_dest = /u01/app/oracle/arch'
log_archive_format = log%t_%s_%r.arc
db_file_multiblock_read_count= 16
db_recovery_file_dest = /u01/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= NONE
db_domain =
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/admin/vc1/bdump
user_dump_dest = /u01/app/oracle/admin/vc1/udump
core_dump_dest = /u01/app/oracle/admin/vc1/cdump
audit_file_dest = /u01/app/oracle/admin/vc1/adump
db_name = vc1
open_cursors = 300
pga_aggregate_target = 65011712
PMON started with pid=2, OS id=2640
PSP0 started with pid=3, OS id=2642
MMAN started with pid=4, OS id=2644
DBW0 started with pid=5, OS id=2646
LGWR started with pid=6, OS id=2648
CKPT started with pid=7, OS id=2650
SMON started with pid=8, OS id=2652
RECO started with pid=9, OS id=2654
CJQ0 started with pid=10, OS id=2656
MMON started with pid=11, OS id=2658
MMNL started with pid=12, OS id=2660
Sat Jan 5 17:20:59 2008
create database vc1
user sys identified by user system identified by maxinstances 1
maxloghistory 1
maxlogfiles 5
maxlogmembers 5
character set US7ASCII
national character set AL16UTF16
datafile 'u01/app/oracle/oradata/vc1/system01.dbf' size 500M
extent management LOCAL
SYSAUX datafile '/u01/app/oracle/oradata/vc1/sysaux01.dbf' size 500M
DEFAULT TEMPORARY tablespace temp01
tempfile '/u01/app/oracle/oradata/vc1/temp01.dbf' size 100M
UNDO tablespace undotbs_01
datafile '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
DEFAULT tablespace users
datafile 'u01/app/oracle/oradata/vc1/user01.dbf' size 100M
LOGFILE group 1
('/u01/app/oracle/oradata/vc1/redo01.log') size 100M,
group 2
('/u01/app/oracle/oradata/vc1/redo02.log') size 100M
Sat Jan 5 17:21:00 2008
Database mounted in Exclusive Mode
Sat Jan 5 17:21:09 2008
Successful mount of redo thread 1, with mount id 613891643
Assigning activation ID 613891643 (0x24973e3b)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/vc1/redo01.log
Successful open of redo thread 1
Sat Jan 5 17:21:09 2008
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sat Jan 5 17:21:09 2008
SMON: enabling cache recovery
Sat Jan 5 17:21:09 2008
create tablespace SYSTEM datafile 'u01/app/oracle/oradata/vc1/system01.dbf' size 500M
EXTENT MANAGEMENT LOCAL online
Sat Jan 5 17:21:09 2008
ORA-1119 signalled during: create tablespace SYSTEM datafile 'u01/app/oracle/oradata/vc1/system01.dbf' size 500M
EXTENT MANAGEMENT LOCAL online
Sat Jan 5 17:21:09 2008
Errors in file /u01/app/oracle/admin/vc1/udump/vc1_ora_2661.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'u01/app/oracle/oradata/vc1/system01.dbf'
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
Sat Jan 5 17:21:09 2008
Errors in file /u01/app/oracle/admin/vc1/udump/vc1_ora_2661.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 861
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'u01/app/oracle/oradata/vc1/system01.dbf'
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Instance terminated by USER, pid = 2661
ORA-1092 signalled during: create database vc1
user sys identified by user system identified by maxinstances 1
maxloghistory 1
maxlogfiles 5
maxlogmembers 5
character set US7ASCII
national character set AL16UTF16
datafile 'u01/app/oracle/oradata/vc1/system01.dbf' size 500M
extent management LOCAL
SYSAUX datafile '/u01/app/oracle/oradata/vc1/sysaux01.dbf' size 500M
DEFAULT TEMPORARY tablespace temp01
tempfile '/u01/app/oracle/oradata/vc1/temp01.dbf' size 100M
UNDO tablespace undotbs_01
datafile '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
DEFAULT tablespace users
datafile 'u01/app/oracle/oradata/vc1/user01.dbf' size 100M
LOGFILE group 1
('/u01/app/oracle/oradata/vc1/redo01.log') size 100M,
group 2
('/u01/app/oracle/oradata/vc1/redo02.log') size 100M...sorry guys that was a silly mistake but it seems i m still not doing it right.
i still am getting ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
line 10 and other line were corrected by inserting / but still the same problem.
sending the alert log file
Sat Jan 5 18:28:04 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_target = 197132288
control_files = /u01/app/oracle/oradata/vc1/control01.ctl, /u01/app/oracle/oradata/vc1/control02.ctl, /u01/app/oracle/oradata/vc1/control03.ctl
db_block_size = 8192
compatible = 10.2.0.1.0
log_archive_dest = /u01/app/oracle/arch'
log_archive_format = log%t_%s_%r.arc
db_file_multiblock_read_count= 16
db_recovery_file_dest = /u01/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= NONE
db_domain =
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/admin/vc1/bdump
user_dump_dest = /u01/app/oracle/admin/vc1/udump
core_dump_dest = /u01/app/oracle/admin/vc1/cdump
audit_file_dest = /u01/app/oracle/admin/vc1/adump
db_name = vc1
open_cursors = 300
pga_aggregate_target = 65011712
PMON started with pid=2, OS id=2685
PSP0 started with pid=3, OS id=2687
MMAN started with pid=4, OS id=2689
DBW0 started with pid=5, OS id=2691
LGWR started with pid=6, OS id=2693
CKPT started with pid=7, OS id=2695
SMON started with pid=8, OS id=2697
RECO started with pid=9, OS id=2699
CJQ0 started with pid=10, OS id=2701
MMON started with pid=11, OS id=2703
MMNL started with pid=12, OS id=2705
Sat Jan 5 18:31:55 2008
create database vc1
user sys identified by user system identified by maxinstances 1
maxloghistory 1
maxlogfiles 5
maxlogmembers 5
character set US7ASCII
national character set AL16UTF16
datafile '/u01/app/oracle/oradata/vc1/system01.dbf' size 500M
extent management LOCAL
SYSAUX datafile '/u01/app/oracle/oradata/vc1/sysaux01.dbf' size 500M
DEFAULT TEMPORARY tablespace temp01
tempfile '/u01/app/oracle/oradata/vc1/temp01.dbf' size 100M
UNDO tablespace undotbs_01
datafile '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
DEFAULT tablespace users
datafile '/u01/app/oracle/oradata/vc1/user01.dbf' size 100M
LOGFILE group 1
('/u01/app/oracle/oradata/vc1/redo01.log') size 100M,
group 2
('/u01/app/oracle/oradata/vc1/redo02.log') size 100M
Sat Jan 5 18:31:55 2008
Database mounted in Exclusive Mode
Sat Jan 5 18:32:05 2008
Successful mount of redo thread 1, with mount id 613909723
Assigning activation ID 613909723 (0x249784db)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/vc1/redo01.log
Successful open of redo thread 1
Sat Jan 5 18:32:05 2008
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sat Jan 5 18:32:05 2008
SMON: enabling cache recovery
Sat Jan 5 18:32:05 2008
create tablespace SYSTEM datafile '/u01/app/oracle/oradata/vc1/system01.dbf' size 500M
EXTENT MANAGEMENT LOCAL online
Sat Jan 5 18:32:28 2008
Completed: create tablespace SYSTEM datafile '/u01/app/oracle/oradata/vc1/system01.dbf' size 500M
EXTENT MANAGEMENT LOCAL online
Sat Jan 5 18:32:28 2008
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Sat Jan 5 18:32:44 2008
CREATE UNDO TABLESPACE UNDOTBS_01 DATAFILE '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
Sat Jan 5 18:32:54 2008
ORA-30012 signalled during: CREATE UNDO TABLESPACE UNDOTBS_01 DATAFILE '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
Sat Jan 5 18:32:54 2008
Errors in file /u01/app/oracle/admin/vc1/udump/vc1_ora_2706.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-30012: undo tablespace 'UNDOTBS1' does not exist or of wrong type
Sat Jan 5 18:32:54 2008
Errors in file /u01/app/oracle/admin/vc1/udump/vc1_ora_2706.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 5792
ORA-00604: error occurred at recursive SQL level 1
ORA-30012: undo tablespace 'UNDOTBS1' does not exist or of wrong type
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Instance terminated by USER, pid = 2706
ORA-1092 signalled during: create database vc1
user sys identified by user system identified by maxinstances 1
maxloghistory 1
maxlogfiles 5
maxlogmembers 5
character set US7ASCII
national character set AL16UTF16
datafile '/u01/app/oracle/oradata/vc1/system01.dbf' size 500M
extent management LOCAL
SYSAUX datafile '/u01/app/oracle/oradata/vc1/sysaux01.dbf' size 500M
DEFAULT TEMPORARY tablespace temp01
tempfile '/u01/app/oracle/oradata/vc1/temp01.dbf' size 100M
UNDO tablespace undotbs_01
datafile '/u01/app/oracle/oradata/vc1/undotbs01.dbf' size 200M
DEFAULT tablespace users
datafile '/u01/app/oracle/oradata/vc1/user01.dbf' size 100M
LOGFILE group 1
('/u01/app/oracle/oradata/vc1/redo01.log') size 100M,
group 2
('/u01/app/oracle/oradata/vc1/redo02.log') size 100M... -
During startup we receive ORA-01092: ORACLE instance terminated. Disconnect
During database startup we receive ORA-01092: ORACLE instance terminated. Disconnection forced error
During database startup we receive ORA-01092: ORACLE instance terminated. Disconnection forced errorWas this working before? If yes, any changes been done recently?
Search MOS website for "ORA-01092 and startup" and check the docs.
Thanks,
Hussein -
Getting ORA-01092: ORACLE instance terminated. Disconnection forced.
Hi,
I have the database on oracle 9.2.0.6 and I get this error when I try to start the database with the spfile..
ORACLE instance started.
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced.
But When I try to startup with the pfile it works fine.
startup pfile ='?/dbs/inittracka.ora'
ORACLE instance started.
Database mounted.
Database opened.
Any help is appreciated.
Thanks.It would seem everyone has their own pet guess on this one!
First, the earlier poster was correct: the reason for the disconnection is most likely to be visible in quite plain text in the alert log, so check that.
Second, the specific error you cite is very commonly caused by having a value for the UNDO_TABLESPACE parameter which isn't the correct one. If you say UNDO_TABLESPACE=UNDO1, for example, when the tablespace is actually called UNDOTBS1.
Since the error happens differently depending on whether you're using an spfile or an init.ora, it would suggest that the value for that parameter is set differently in the two files. You can vi or cat the spfile to inspect its contents (just don't save it again afterwards!) and check what it has for that parameter.
Since the pfile works fine, you could contemplate getting into sqlplus and saying 'create spfile from pfile', but I'd worry about over-writing a lot of good values in the current spfile by doing that, as well as the dodgy one for the undo tablespace that you are wanting to be rid of. So go carefully! (And anyone who advises you to just create an spfile without a lot of warnings and suggestions to think carefully about what you're doing is being reckless). -
Functions: Oracle VM Manager vs. Grid Control Oracle VM Management Update
Hello guys,
i have seen both tools .. and i have to say that some really basic functions are missing in the Oracle VM management addon for Grid Control 10.2.0.5 .. just some examples:
- Renaming virtual machines (because of the prefix syntax is not very useful)
- Adding ISOs as CD/DVD after removing them one from the profile (until now you need to know the whole path to the DVD, even if the ISO is registered in the repository)
- Renaming image files (for example the disks of the VMs .. this would be very helpful in case of cloning machines)
- List the VNC port for the running VMs
All these features are available under the VM Manager (except the renaming file part) ... do you know when this will be implemented or is the Oracle VM management update already "finished" in its functions.
RegardsHi,
You can manage your Oracle VM environment using Oracle Enterprise Manager 12c. Using Oracle Enterprise Manager 12c you can discover Oracle VM Servers, discover storage servers and file systems, create and edit server pools, set up networks and create storage repositories.
for more information, look at this URL.
I hope this can help you
Best Regards -
Control when a client is disconnected
Hello:
I am developing a MUS client/server application and I need to know when a client disconnect how to detect and delete from my list in the Server application.
I get "ConnectionProblem" only when the MUS is not run but not when a client disconnect.
Thank you very much.Thank you Chunick.
I need that every client stay connected about continue five hours to my application and when one or more disconnected not by itself but some error like shutdown PC or other kind of error, to know that and remove from my list in the server.
Another thing that I need is to disconnect to a client when I need it. Can you tell me how, please? -
Does people from India control ORACLE DBA jobs in USA?
Edited by: ORACLEXXX on Mar 2, 2011 4:28 PM
Pasalapudi wrote:
60% are from IndiaPerhaps. But I'm certain that exactly 85.368% of all statistics are made up on the spot . . . ;-)
I'm not sure I really understand the OP's question, or what he's getting at. Some "vast Indian conspiricy"? -
Using RealPlayer control in OLE container to play video
Hi everyone,
I am a student and I want to use Oracle OLE control in Oracle forms to implement some multimedia data. I choose RealPlayer G2 control / Window media Player / even Oracle Video Control to do this. But I have one common problem that I can't insert those control object in the OLE container automatically(in the designer).
How can I have the multimedia control object start when forms runtime?
Also, how can I store and retrieve data using that multimedia control object?
Anyone can help me?
Thx.
CarolHello,
I have a similar problem. I want to extract a blob filed with ole from forms with other tools to a file, but the new file then has extra informations about the ole-object. Due to MetaLink there seems to be no possibility to strip these extra bytes off the data.
Please let me know if you have a solution to this problem.
Greetings,
Thorsten. -
Urgent, please help! OLE API from Oracle 7 to Oracle 8
Hi,
Our company has a client application developed basing on VC++, Oracle OLE to communication with Oracle database.(WinNT)
Now, we upgrade the client side from Oracle 7 to Oracle 8, then using new version OLE API. My question is:
1. if or not, we have to modify VC source code, using new OLE library(there do has difference between OLE for Oracle 7 & Oracle 8).
2. Using OLE, can Oracle 8 client communicate with Orcle 7 server?
Many thanks and regards.
Zhan([email protected])Hi Zan
Oracle8i Client CAN access Oracle7.x.x db, however be sure to unistall the
previuos version of Oracle OLE.
Good Luck
Maybe you are looking for
-
How to authorise many iPads with one Apple ID
Hi all, This is for work purposes. Is it possible to have one Apple ID, authorised with multiple iPads, could be 30 or more? The iPads will be used for teaching so will all run the same apps. They are handed back in after class. I should say I want t
-
Buying a series when owning individual episode, how does that work?
I'm thinking of buying a TV Series but I have already owe some of the episode. How will Itunes store charge me? Will it charge me the full amount, or figure out I have bought some of the episodes and only charge me for the ones I don't have? Or am I
-
GR55 Report Takes long time.
Hi experts, System Details: ECC 6.0; Windows 2008 R2; MS SQL 2005 Database. Archiving is done and now when our functional team is running the GR55 to access data, it is taking a hell lot of time to bring-out the data. They have approached the Basis t
-
Hi Experts, My senario is Idoc coming from SAP to PI,from PI must reach Legacy(Jms adapter),SAP has posted Idoc but it is not reaching legacy,Even I dont see any message related to that interface in MONI,I have taken the idoc number and chec
-
IDOC PPCC2PRETEVENT is not working
Hi Experts, I wanted to use the IDOC "PPCC2PRETEVENT" for posting the confirmation of a process order. I have done all the settings in WE20 and BD64. IDOC is getting generated and the status is 53. But no confirmation is getting updated. Even if ther