OLE Integration with Excel --- Urgent
Hello,
i want to draw two charts on Excel sheet based on some data in SAP. in the excel sheet first i have to display the data and then draw the chart for that. now i am able to draw first chart but not able to draw the second chart because i think the area where i have drawn my first chart is active and not able to print the data related to second chart. can any one tell me, how to activate the sheet after drawing first graph.
Thanks a lot in advance...
Mohan
Mohan,
Try this....
You can activate using ...CALL METHOD OF gs_activesheet 'Activate' .
Report ZTEST.
INCLUDE ole2incl .
DATA: gs_excel TYPE ole2_object ,
gs_wbooklist TYPE ole2_object ,
gs_application TYPE ole2_object ,
gs_wbook TYPE ole2_object ,
gs_activesheet TYPE ole2_object ,
gs_sheets TYPE ole2_object ,
gs_newsheet TYPE ole2_object ,
gs_cell1 TYPE ole2_object ,
gs_cell2 TYPE ole2_object ,
gs_cells TYPE ole2_object ,
gs_range TYPE ole2_object ,
gs_font TYPE ole2_object ,
gs_interior TYPE ole2_object ,
gs_columns TYPE ole2_object ,
gs_charts TYPE ole2_object ,
gs_chart TYPE ole2_object ,
gs_charttitle TYPE ole2_object ,
gs_charttitlechar TYPE ole2_object ,
gs_chartobjects TYPE ole2_object .
DATA gv_sheet_name(20) TYPE c .
DATA gv_outer_index LIKE sy-index .
DATA gv_intex(2) TYPE c .
DATA gv_line_cntr TYPE i . "line counter
DATA gv_linno TYPE i . "line number
DATA gv_colno TYPE i . "column number
DATA gv_value TYPE i . "data
PARAMETERS: p_sheets TYPE i .
*Step 2 Initiate the do-loop and OLE automation base objects.
*Code Part C.2 Looping and initializing, adding new worksheets
START-OF-SELECTION .
DO p_sheets TIMES .
*--Forming sheet name
gv_intex = sy-index .
gv_outer_index = sy-index .
CONCATENATE 'Excel Sheet #' gv_intex INTO gv_sheet_name .
*--For the first loop, Excel is initiated and one new sheet is added
IF sy-index = 1 .
CREATE OBJECT gs_excel 'EXCEL.APPLICATION' .
SET PROPERTY OF gs_excel 'Visible' = 1 .
GET PROPERTY OF gs_excel 'Workbooks' = gs_wbooklist .
GET PROPERTY OF gs_wbooklist 'Application' = gs_application .
SET PROPERTY OF gs_application 'SheetsInNewWorkbook' = 1 .
CALL METHOD OF gs_wbooklist 'Add' = gs_wbook .
GET PROPERTY OF gs_application 'ActiveSheet' = gs_activesheet .
SET PROPERTY OF gs_activesheet 'Name' = gv_sheet_name .
*--For the rest of loops, other sheets are added
ELSE .
GET PROPERTY OF gs_wbook 'Sheets' = gs_sheets .
CALL METHOD OF gs_sheets 'Add' = gs_newsheet .
SET PROPERTY OF gs_newsheet 'Name' = gv_sheet_name .
ENDIF .
gv_line_cntr = 1 . "line counter
*Step3 Write the title and format it.
*--Title
*--Selecting cell area to be merged.
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = 1
#2 = 4.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
*--Merging
CALL METHOD OF gs_cells 'Merge' .
*--Setting title data
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 1.
SET PROPERTY OF gs_cell1 'Value' = 'TITLE' .
*Code Part C.3 Writing and formatting the title
*--Formatting the title
GET PROPERTY OF gs_cell1 'Font' = gs_font .
SET PROPERTY OF gs_font 'Underline' = 2 .
SET PROPERTY OF gs_font 'Bold' = 1 .
SET PROPERTY OF gs_cell1 'HorizontalAlignment' = -4108 .
GET PROPERTY OF gs_cell1 'Interior' = gs_interior .
SET PROPERTY OF gs_interior 'ColorIndex' = 15 .
SET PROPERTY OF gs_interior 'Pattern' = -4124 .
SET PROPERTY OF gs_interior 'PatternColorIndex' = -4105 .
*Step 4 Write some additional data for the title area and format them.
gv_line_cntr = gv_line_cntr + 1 .
*--Writing some additional data for the title
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 1.
SET PROPERTY OF gs_cell1 'Value' = 'Sheet No' .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 5.
SET PROPERTY OF gs_cell1 'Value' = ':' .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 6.
SET PROPERTY OF gs_cell1 'Value' = gv_intex .
*--Formatting the area of additional data 1
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = gv_line_cntr
#2 = 5.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF gs_cells 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*--Formatting the area of additional data 2
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = 1
#2 = 5.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = gv_line_cntr
#2 = 5.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF gs_cells 'Columns' = gs_columns .
CALL METHOD OF gs_columns 'AutoFit' .
*--Bordering title data area
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = gv_line_cntr
#2 = 6.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
CALL METHOD OF gs_cells 'BorderAround'
EXPORTING
#1 = 1 "continuous line
#2 = 4. "thick
*Code Part C.4 Some additional writing to the title area, formatting
*and bordering around the title area
*Step 5 Put axis labels to the data area.
*Code Part C.5 Axis Labels
*--Putting axis labels
gv_colno = 2 .
gv_line_cntr = gv_line_cntr + 5 .
gv_linno = gv_line_cntr - 1 .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_linno
#2 = 1.
SET PROPERTY OF gs_cell1 'Value' = 'X' .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 1.
SET PROPERTY OF gs_cell1 'Value' = 'Y' .
*Step 6 Generate some data.
*Code Part C.6 Generating Data
*--Generating some data
DO 3 TIMES .
gv_value = gv_outer_index * sy-index * 10 .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_linno
#2 = gv_colno.
SET PROPERTY OF gs_cell1 'Value' = sy-index .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = gv_colno.
SET PROPERTY OF gs_cell1 'Value' = gv_value .
gv_colno = gv_colno + 1 .
ENDDO .
*Step 7 Set source data area for the chart.
*Code Part C.7 Setting source data area for the chart
*--Source data area
gv_colno = gv_colno - 1 .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_linno
#2 = 1.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = gv_line_cntr
#2 = gv_colno.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
*Step8 Draw the chart
*Code Part C.8 Draw the chart
GET PROPERTY OF gs_application 'Charts' = gs_charts .
CALL METHOD OF gs_charts 'Add' = gs_chart .
CALL METHOD OF gs_chart 'Activate' .
SET PROPERTY OF gs_chart 'ChartType' = '51' . "Vertical bar graph
CALL METHOD OF gs_chart 'SetSourceData'
EXPORTING
#1 = gs_cells
#2 = 1.
SET PROPERTY OF gs_chart 'HasTitle' = 1 .
GET PROPERTY OF gs_chart 'ChartTitle' = gs_charttitle .
GET PROPERTY OF gs_charttitle 'Characters' = gs_charttitlechar .
SET PROPERTY OF gs_charttitlechar 'Text' = 'Sample Graph' .
*Step 9 Locate the chart onto the current worksheet.
*Code Part C.9 Locating the chart onto the current worksheet
*--Locate the chart onto the current worksheet
*--Activate current sheet
CALL METHOD OF gs_excel 'WorkSheets' = gs_activesheet
EXPORTING
#1 = gv_sheet_name.
CALL METHOD OF gs_activesheet 'Activate' .
CALL METHOD OF gs_chart 'Location'
EXPORTING
#1 = 2
#2 = gv_sheet_name.
*Step 10 Reposition the chart to a proper place and finish the do-loop.
*Code Part C.10 Repositioning the chart to a proper place and end of
*the do-loop counting sheet number
*--Reposition the chart on the worksheet (cut&paste)
CALL METHOD OF gs_activesheet 'ChartObjects' = gs_chartobjects .
CALL METHOD OF gs_chartobjects 'Select' .
CALL METHOD OF gs_chartobjects 'Cut' .
*--Select new area
gv_line_cntr = gv_line_cntr + 2 .
CALL METHOD OF gs_excel 'Cells' = gs_cell1
EXPORTING
#1 = gv_line_cntr
#2 = 1.
CALL METHOD OF gs_excel 'Cells' = gs_cell2
EXPORTING
#1 = gv_line_cntr
#2 = 1.
CALL METHOD OF gs_excel 'Range' = gs_cells
EXPORTING
#1 = gs_cell1
#2 = gs_cell2.
CALL METHOD OF gs_cells 'Select' .
CALL METHOD OF gs_activesheet 'Paste' .
ENDDO .
*Step 11 Free OLE objects to deallocate memory.
*Code Part C.11 Deallocating the memory
*--Deallocating memory
FREE: gs_excel, gs_wbooklist, gs_application, gs_wbook,
gs_activesheet,gs_sheets, gs_newsheet, gs_cell1,
gs_cell2, gs_cells, gs_range, gs_font, gs_interior,
gs_columns, gs_charts, gs_chart, gs_charttitle,
gs_charttitlechar, gs_chartobjects .
Similar Messages
-
Desktop Integration with Excel sheet
Hello Everyone,
I have a requirement where in i need to create an excel document with different format and data for each cell.Here i want to use office integration control .Can anyone provide me sample code to create a spreadsheet and passing the data to it through office integration..?.
I am also looking for other option where in instead of building document from scratch,i want to use one standard template which i should be able to open and pass the data to a certain cells of this document .Is it possible to implement this functionality through desktop integration controls..? Please do the needful.
Thank you in advance.
Regards,
Venkat.Hi,
By using OLE your code becomes very lengthy and you have to write your own
reusable subroutines. It is not suitable for complex requirement.
You can go for Desktop Office Integration (DOI) classes and their methods which serves
most of the common user requirements.
Please refer below examples
1. SAPRDEMO_SPREADSHEET_INTERFACE
2. SAPRDEMO_FORM_INTERFACE
Regards,
Vishal -
SAML authentication Secure store service target ID Project server integration with excel service
I installed and configured share Point 2013 Project server 2013, and Created web application Trusted Identity Provider (SAML 2.0) ,it is working as we expected means
..end user are able to access application(User Login through email and alies(account NAME) )
My problem here CA is working NTLM authentication ,Web application is working SAML
while creating service application(LIKE SSSA Excel Performance ... ( it automatically take NTLM) I CREATED TARGET ID in secure store service application ,I chooser "GROUPS" under SSSA,and
we added members "group to account and email id.
I configure Excel service application and i SSSA Target ID in this excel service application also added trusted location for PWA site
while opening excel sheet under Project server (An error occurred while accessing application id ProjectServerApplication from Secure
Store Service. The following connections failed to refresh)
I tried target ID choose option " Group Ticket"
Is it CA required for SAML authentication? .. (extend web application
How Service application like SSSA will work for SAML authentication?Hi SridharMandipudi,
as i know, usually when the error appear, you need to check the member.
The domain group that was specified the Secure Store Service ID ProjectServerApplication did not have any members in the group.
and please also have a try in a testing secure store service application:
Created new secure store service application with new target application ID. and added this ID in excel service application -----global settings----Application ID.
went to Central admin---manage web application---selected web application ---click on Service Connection---associated newly created secure store service application.
edited data connection string of excel file.
went to site and tried refresh that excel file and able to refresh the file.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
OLE integration with Forms Server
Can Forms 6 server running 3 tier, be used to call and integrate
from an Oracle Form connecting to Microsoft Word or other local
applications on a PC (+ local printing) ? We can do it 2 tier
with OLE but need to migrate to 3 tier.
How do we achieve this ? What are the options ?
nullCan Forms 6 server running 3 tier, be used to call and integrate
from an Oracle Form connecting to Microsoft Word or other local
applications on a PC (+ local printing) ? We can do it 2 tier
with OLE but need to migrate to 3 tier.
How do we achieve this ? What are the options ?
null -
Hi All,
Does anyone know of any reference/help/material on how to use OLE automation to download and format data from ABAP to Excel.
I need to know what the available methods and properties are so I could format the data the way I want.
Any help will be greatly appreciated.
Regards.Hi Aurang
You can call almost all methods using OLE. What is required is to know how to interpret a script to ABAP OLE call. This is explained in the tutorial<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c1d54348-0601-0010-3e98-bd2a2dcd9e6c">"An Easy Reference For OLE Automation"</a>
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a> -
Error while opening excel integration with sap
Hi
While view planning with excel integration in SAP, I am getting error. I am getting this error in CCA and COPA also.
Can anybody help me how to resolve the issue. Please see the meessage
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
Regards
Sekhar DattaHi ,
I think you are using older version,use microsoft excel 2007 version,then it will opens.
Regrads,
SVS
Edited by: svskumar on Aug 19, 2010 12:18 PM -
Excel integration with Entry and Approval for SSM not working
Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
- Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
- The browser security is definitely set to accept all active X scripts
- I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
- Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob -
Urgent: Sending an Email with Excel sheet attachment
Hi All,
I am preparing a report and has to send mail with excel sheet attachement. In report i am getting everything fine. But in the mail i am not getting the data, data is passing to the FM succesfully. But in the mail, excel is not having full data.
the below mentioned is my code.
i_texts-line = c_stern.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
LOOP AT i_texc.
i_att_line-line = i_texc.
APPEND i_att_line.
ENDLOOP.
DATA: wa_doc_chng LIKE sodocchgi1.
DATA: w_tab_lines LIKE sy-tabix.
STATICS: c_body_start TYPE i VALUE '1'.
CONSTANTS: lc_filename(10) TYPE c VALUE 'Attachment',
lc_atthead(30) TYPE c VALUE 'Manually released invoices'.
DATA: i_objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: w_doc_name(30) TYPE c.
DATA: l_text1(15),
l_text2(12),
l_text3(15),
l_text4(15),
l_text5(14),
l_text6(17),
l_text7(10),
l_text8(20),
l_text9(19),
l_text10(19),
l_text11(19),
l_text12(16),
l_text13(20),
l_text14(19),
l_text15(19),
l_text16(30).
DATA: DATE(10),
DT(2),
MON(3),
YR(4),
lc_final(50).
CLEAR: i_texts, i_reci,i_att_line. "i_bname,
REFRESH: i_texts, i_reci,i_att_line. "i_bname,
WRITE sy-datum TO w_datex.
WRITE sy-uzeit TO w_timex.
l_text1 = text-003.
l_text2 = text-004.
l_text3 = text-005.
l_text4 = text-006.
l_text5 = text-007.
l_text6 = text-008.
l_text7 = text-009.
l_text8 = text-010.
l_text9 = text-011.
l_text10 = text-012.
l_text11 = text-013.
l_text12 = text-014.
l_text13 = text-015.
l_text14 = text-016.
l_text15 = text-017.
l_text16 = text-026.
CONCATENATE
l_text1
l_text2
l_text3
l_text4
l_text5
l_text6
l_text7
l_text8
l_text9
l_text10
l_text11
l_text12
l_text13
l_text14
l_text15
l_text16
INTO i_texts SEPARATED BY
c_horz_tab.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
CLEAR i_texts.
LOOP AT i_texc.
i_att_line-line = i_texc.
APPEND i_att_line.
ENDLOOP.
LOOP AT so_rec.
i_reci-receiver = so_rec-low.
i_reci-express = 'X'.
i_reci-rec_type = 'U'.
APPEND i_reci.
ENDLOOP.
DESCRIBE TABLE i_texts LINES w_tab_lines.
READ TABLE i_texts INDEX w_tab_lines.
wa_doc_chng-doc_size = ( w_tab_lines - 1 ) * 255 + STRLEN( i_texts ).
wa_obj_name = 'ZFI_XX_REL_BLOCKED_INVOICE_01'.
DT = SY-DATUM+6(2).
MON = SY-DATUM+4(2).
YR = SY-DATUM+0(4).
CONCATENATE DT MON YR INTO DATE SEPARATED BY '-'.
CONCATENATE lc_atthead date into lc_final separated by ' '.
MOVE lc_final
TO wa_obj_descr .
wa_doc_chng-obj_name = wa_obj_name.
wa_doc_chng-obj_descr = wa_obj_descr.
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 0.
i_objpack-body_num = w_tab_lines.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
APPEND LINES OF i_att_line TO i_texts.
LOOP AT i_arseg INTO wa_arseg.
i_xmplt_d-belnr = wa_arseg-belnr.
i_xmplt_d-budat = wa_arseg-budat.
i_xmplt_d-bukrs = wa_arseg-bukrs.
i_xmplt_d-lifnr = wa_arseg-lifnr.
i_xmplt_d-name1_lifnr = wa_arseg-name1_lifnr.
i_xmplt_d-wrbtr = wa_arseg-wrbtr.
i_xmplt_d-waers = wa_arseg-waers.
i_xmplt_d-ebeln = wa_arseg-ebeln.
i_xmplt_d-ebelp = wa_arseg-ebelp.
i_xmplt_d-reason = wa_arseg-reason.
i_xmplt_d-dmeng = wa_arseg-dmeng.
i_xmplt_d-dwert = wa_arseg-dwert.
i_xmplt_d-bname = wa_arseg-bname.
i_xmplt_d-name_text = wa_arseg-name_text.
i_xmplt_d-udate = wa_arseg-udate.
i_xmplt_d-comment = wa_arseg-comment.
APPEND i_xmplt_d.
ENDLOOP.
LOOP AT i_xmplt_d.
CONCATENATE i_xmplt_d-belnr
i_xmplt_d-budat
i_xmplt_d-bukrs
i_xmplt_d-lifnr
i_xmplt_d-name1_lifnr
i_xmplt_d-wrbtr
i_xmplt_d-waers
i_xmplt_d-ebeln
i_xmplt_d-ebelp
i_xmplt_d-reason
i_xmplt_d-dmeng
i_xmplt_d-dwert
i_xmplt_d-bname
i_xmplt_d-name_text
i_xmplt_d-udate
i_xmplt_d-comment
INTO i_texts SEPARATED
BY c_horz_tab.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
CLEAR i_texts.
ENDLOOP.
DESCRIBE TABLE i_texts LINES w_tab_lines.
READ TABLE i_texts INDEX w_tab_lines.
wa_doc_chng-doc_size = ( w_tab_lines - 1 ) * 255 + STRLEN( i_texts ).
DESCRIBE TABLE i_texts LINES w_tab_lines.
i_objpack-transf_bin = ' '.
i_objpack-head_start = 0.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = w_tab_lines.
i_objpack-doc_type = 'XLS'.
i_objpack-obj_name = 'Attachment'.
i_objpack-obj_descr = w_doc_name.
i_objpack-obj_descr = lc_filename.
i_objpack-doc_size = w_tab_lines * 255.
APPEND i_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
TABLES
packing_list = i_objpack
contents_txt = i_texts
receivers = i_reci
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
WRITE: / 'Error in send E-Mail' .
ENDIF.
please revert me asap. It is very urgent to me. thanks in advance.
ByehI
Have you build your Excel Data table to get attachement in Mail? If no then please find the Eg. code for your reference to send Excel attachment..
* End of Selection Event : Displaying the selected data *
END-OF-SELECTION.
PERFORM EMAIL_EXCEL_ATTACHMENT.
******///form
FORM EMAIL_EXCEL_ATTACHMENT .
* Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING S_EMAIL
TEXT-042
C_XLS
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
ENDFORM. " EMAIL_EXCEL_ATTACHMENT
********///form BUILD_XLS_DATA_TABLE
FORM BUILD_XLS_DATA_TABLE .
DATA : LV_NETWR(20) TYPE C,
LV_BOL_DATE(20) TYPE C,
LV_KAWRT(20) TYPE C,
LV_FKDAT(20) TYPE C,
LV_WAERK(20) TYPE C,
LV_KURRF(20) TYPE C,
LV_SHIPDATE(20) TYPE C,
LV_DEPTDATE(20) TYPE C.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF. "#EC *
DATA STR TYPE STRING.
**********/ this parameter concatenate to get headers
CONCATENATE STR
'SLNO'
'OWNER'
'SERIAL NO'
'FROM'
'DESTINATION'
'INVOICE VALUE'
'DESCRIPTION'
'CUSTOMER NAME'
'BL NUMBER'
'BL DATE'
'VESSEL NAME/AIRLINE DETAILS'
'MODE OF TRANSIT'
'SHIPPING MARKS'
'DUTY SUM INSURED'
'FLAG'
'OPEN COVERNO'
'INVOICE DATE'
'INVOICE NO'
'LC WORDING'
'QUANTITY'
'PACKAGING DETAILS'
'BASIS OF VALUATION'
'EXCLUDE WAR SRCC'
'CURRENCY'
'EXCHANGE RATE'
'ADDRESS'
'VESSEL BUILT YEAR'
'VESSEL FLAG'
'VOYAGE NO'
'SHIPMENT DATE'
'DEPARTURE DATE'
'SURVEYOR COUNTRY'
'SURVEYOR CITY'
'SURVEYOR AGENT'
'SURVEYOR ADDRESS'
'EXPORT CONSIGNMENT'
'CONTAINER DETAILS'
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
LOOP AT IT_FINAL.
*******/ this is to pass body / row data
WRITE : IT_FINAL-NETWR TO LV_NETWR, "#EC UOM_IN_MES
IT_FINAL-BOL_DATE TO LV_BOL_DATE,
IT_FINAL-KAWRT TO LV_KAWRT, "#EC UOM_IN_MES
IT_FINAL-FKDAT TO LV_FKDAT,
IT_FINAL-WAERK TO LV_WAERK,
IT_FINAL-KURRF TO LV_KURRF,
IT_FINAL-SHIPDATE TO LV_SHIPDATE,
IT_FINAL-DEPTDATE TO LV_DEPTDATE.
CONCATENATE
STR
IT_FINAL-SLNO
IT_FINAL-OWNER
IT_FINAL-SRNO
IT_FINAL-PORT_LOAD
IT_FINAL-PORT_DSCHR
LV_NETWR
IT_FINAL-DESCRIP
IT_FINAL-CUSTNAME
IT_FINAL-BOL_NUM
LV_BOL_DATE
IT_FINAL-VESSELNAME
IT_FINAL-SHP_TYPE
IT_FINAL-SHP_MARK
LV_KAWRT
IT_FINAL-FLAG
IT_FINAL-OPEN_CONO
LV_FKDAT
IT_FINAL-VBELN
IT_FINAL-LC_WORD
IT_FINAL-QUANT
IT_FINAL-PACKDETL
IT_FINAL-INCO1
IT_FINAL-EXCWSR
LV_WAERK
LV_KURRF
IT_FINAL-ADDPAY
IT_FINAL-VESSBYR
IT_FINAL-VESSFLG
IT_FINAL-VOY_FLY_NO
LV_SHIPDATE
LV_DEPTDATE
IT_FINAL-SURCOUNT
IT_FINAL-INCO2
IT_FINAL-EXPORT_CON
IT_FINAL-SURAGT
IT_FINAL-SURADD
IT_FINAL-CONTRNO
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
ENDLOOP.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = STR
TABLES
FTEXT_TAB = IT_ATTACH.
ENDFORM. " BUILD_XLS_DATA_TABLE
******// form POPULATE_EMAIL_MESSAGE_BODY
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
IT_MESSAGE = TEXT-043. " Please find attached Insurance Certificate details
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*******'/ form SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* text
* -->PIT_MESSAGE text
* -->PIT_ATTACH text
* -->P_EMAIL text
* -->P_MTITLE text
* -->P_FORMAT text
* -->P_FILENAME text
* -->P_ATTDESCRIPTION text
* -->P_SENDER_ADDRESS text
* -->P_SENDER_ADDRES_TYPE text
* -->P_ERROR text
* -->P_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER. "#EC *
DATA: LD_ERROR TYPE SY-SUBRC, "#EC *
* LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
* LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC. "#EC *
* ld_email = p_email.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
DESCRIBE TABLE IT_ATTACH LINES W_CNT.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
W_CNT * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'raw'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT S_EMAIL.
T_RECEIVERS-RECEIVER = S_EMAIL-LOW.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*******/form
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* text
* --> p1 text
* <-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*********end of code to trigger mail in excel format....
If any other help please let me know......
I am sure this example code will help you to resolve your problem...
please analyse above code for your requirement...
In my scenario the message you said is not displaying.....
Reward Points -
Customer Service (CS) module integration with other modules VERY URGENT
Customer Service (CS) module integration with other modules like sd,mm,pm,fi
documentation very urgent please send to my mail id [email protected]This is with regards to Integration of CS module with other modules:
CS is in very close integration with Plant Maintenance(PM), Sales and Distribution(SD), FI, MM, Costing (CO) and also PP and HR.
Incase you want to have resource related billing using DIP profile (PM) you must have Cost element and Service Products defined in MM etc.
Itu2019s a very vast area needs to be explored based on the requirement in CS module. Any further assistance needed pls let me know.l. -
PA Integrated Planning with Excel.
Good day guys
I'm busy setting up PA planning with Excel. I've built the planning layout and linked it to a planner profile.
Im now at the maintaining the file description screen. I would like to save the file description but cannot find how to do it as I do not have the 'save as' to clivk on and give it a file name to use when uploading.
I'm also getting this message:'A later upload is not possible with this layout
Message no. K9363'
Can someone show me where I'm going wrong and help resolve this issue?
Regards
MenetiHi Guys
I've resolved the issue. I went to Excel options and changed the Save function to allow 'Save As'
Regards
MS -
URGENT:Installing TMS integrated with Oracle Clinical
hi ,
I am installing TMS integrated with Oracle Clinical .
In the 9i installer screens , one is for
" Destination Oracle HOme And Oracle HOme Name "
what should be given here a new Oracle home name and destination or the same where 9i for OC was installed .
Also can I install TMS and OC on Same database instance ?
thanks And regardsI think that TMS should be in the same Oracle home. Architecturally, TMS does install in the same database instance as OC. OPA 4.5 is destined to change that, offering a stand alone TMS instance that integrates with specific instances of OC, RDC, AERS, etc. More details of that <fun> migration whenever 4.5 is officially released.
Hope this helps. -
Office2010_32bit Integration with SAPGUI720 on Windows7
Hi
I am testing the Office2010_32bit Integration with SAPGUI720 on Windows7.
When trying to view a list as an embedded Excel-Sheet (the Excel-window is embedded in the SAPGUI-Window),
1.) the Excel-window is opened as a separate window
2.) the Excel-Sheet stays empty
The same when testing OLE: the Excel-Sheet is empty.
Is is this a known issue ? Is there a solution for that yet ?Yes it is know issue. Refer to SAP Standard Note 1292970 for the empty Excel solution and for the extra window problem refer to the below Microsoft KB article,
http://support.microsoft.com/?kbid=2009802 -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Discoverer integration with EBS R12 !!!
Hello Sir,
I need help to install/integrate Discoverer with R12.
Actually, our clients are using Discoverer 4i in current EBS 11.5.10.2 in production. We have just upgraded EBS in TEST environment from 11.5.10.2 to R12.1.3.
I had suggested client that Discoverer 4i is actually de-supported and they need to upgrade Discoverer version to minimum 10.1.2.3 or higher to integrate it with R12.1.3.
Now, client also have requirement for Discoverer to be certified with MS Excel 2010 format. So I have suggested to upgrade Discoverer version to minimum 11.1.1.4.
Latest certified Discoverer version is 11.1.1.7.0 as per note Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 (Doc ID 1074326.1)
1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
In addition to the doc you have, please see:
https://blogs.oracle.com/stevenChan/entry/discoverer_11_1_1_7
How to Test Discoverer Integration with E-Business Suite 11i and Release 12? (Doc ID 1065257.1)
Running Discoverer Reports From EBS R12 (Doc ID 1516784.1)
R12: How to Create a Link to a Discoverer Workbook (Doc ID 471303.1)
2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
Installation Recommendations - 11g Release 1 (11.1.1)
Installer Screens - 11g Release 1 (11.1.1.7.0)
3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
You can download WebLogic 10.3.6 from WebLogic Server 12c (12.1.1), WebLogic Server 11g (10.3.6) and Previous Releases
4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?
Please see Steven Chan's reply in this link -- https://blogs.oracle.com/stevenChan/entry/discoverer_11gr1_primer
Thanks,
Hussein -
Problem with Excel output format
Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AMHi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati
Maybe you are looking for
-
I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?
-
Changing router to 3rd party router
I've been thinking about upgrading my router to a 3rd party AC wireless router so I can use more of my bandwith on my laptop and other wireless gadgets. My question is can I change it and keep all my tv services. I was told I have to use verizon's a
-
Problem while starting Apache/Tomcat as a NT Service
We are having a virtual folder which is mapped to a network physical folder.In this case while starting Apache/Tomcat as NT service it fails to map that folder.If we start the Tomcat as a Standalone service(using start menu) it works fine.I don't kno
-
Create Process Instance via DB insert?
I would like to have a DB insert kick off a process instance. I am an ALBPM novice, but I'm guessing the solution would involve a DB insert trigger (Oracle) and a PAPI ProcessServiceSession.createProcessInstance() call. Does anyone know how to put it
-
IPhoto slideshow within Keynote presentation?
Is it possible to have a section of the Keynote presentation appear as though it were an iPhoto slideshow, ie with a selection of photos occupying the entire screen and fliping over with one music track. The slideshow would appear as a a part within