OM INFOTYPE ENHANCEMENT ( FIELD ADDITION)

Hi Experts,
My requirement is to add field in PO13 based on the subtype selected, Once the entry is saved , the HRP1002 is to be updated.
Please Help me . Thanking you in advance.

Hi,
I think u have 2 make things in SPRO.
U have 2 make entry in Restrict country grouping.
or check it in T500L table whether the country entry
is there?
If u need any additional info get it from Basis
consultant.
Hope it will work.
Manian.

Similar Messages

SAP HR : ABAP Query / Infotype enhancement / Field in Q0168 & not in P0168

Hi all,
There is a field in the structure Q0168-CSTDT, the field can be seen in the PA20/30 screen under the costs tab.
This field is not there in the P0168 structure.
The requirement is to add this to the ABAP Query.
What steps should be taken ? Do we need ABAP coding ?
Thanks
Rahul

Hi,
    Use Fm : HR_BEN_GET_KEY_DATE to get the Benefit Cost Calculation Date ..
    Look at include MP016840 for the same.
    Look for F1 on the field in pa20/pa30 , you'll get an idea on how this field is calculated.
Regards,
Srini.

Problem with infotype enhancement deletion...

Hi,
I have deleted infotype enhancement for adding a extra screen field in PM01. But even after that deletion I see that in table PA0001 the CI include is there along with the additional field.
Please help or let me know the proper method of deleting enhancment.
Regards,
Rajesh.

Hi ..
Deleting the custome fields in the Infotype 0001 will not solve the issue. There will be some custom screens developed to include the custom fields.
You can find the customs screens in T582C table. Once it is deleted then the deletion can be told as 100%
Hope this helps
Good Luck.
Shyam

Custome field addition in production order

Hello All,
I want to add one custom field in production order. My abaper tried "PPCO0012 enhancement for displaying/changing order header data" enhancement and SAP version is 4.7. But it is inconsistent. Can anyone suggest me other way to add one field. I want to add new field as " New revisio level"
Regards,
Mayur

Why not try defining a new user status?
In this user status you can set/reset the desired "new revision level"( if its the matter of only one field addition).
Futher you can constraint any business process - if at all required based on this new user status.

Infotype enhancements steps

how we can enhance the standard infotype enhancement for PA INFOTYPES,WHAT ARE THE STEPS .

Hi Naresh,
Enhancing Infotypes
You can only enhance infotypes which can be maintained directly. For more
information, see the Infotypes per Object Type view of the Organizational
Management IMG Customizing activity Maintain Infotypes (this tells you whether
each infotype can be maintained directly).
Another way of displaying all infotypes concerned is to display all the entries from the Infotype per Object Type table (T777I), for which the MAINT field is active (can not be maintained via standard transactions).
The following standard infotypes can not be enhanced.
Infotype: 1000 (object)
Infotype: 1001 (relationships)
Procedure
To use the infotype copier, you must be able to program in ABAP/4, be familiar with
the ABAP/4 Dictionary, the ABAP/4 Screen Painter and the ABAP/4 Menu Painter.
1. Enter the transaction code PPCI
2. Enter a four digit infotype number (nnnn).
3. Flag CI Include.
4. Choose Create All.
This brings you to Structure maintenance.
5. Create the desired fields in CI_Pnnnn and activate the structure.
6. Maintain entries in table 582C (Include-screens for infotypes).
Result
You have enhanced your chosen infotype by adding fields created in the structure CI_Pnnnn.
The following objects have been created:
CI_Include CI_Pnnnn
Include for module pool MPnnnn00
Include screen ZPnnnn000200
Check this link for creating infotype
http://www.sapdev.co.uk/hr/hr_infotypes2.htm
Hope this helps u.
Regards,
Ruthra

Infotype enhancements

how can we enhance the infotype 0006(address) and 0021(family) . i need to add some more fields to that std infotype.
what are the steps for infotype enhancements? can any one expain briefly?
with regards,
pavan kumar

Hi,
For any Info type enhancement SAP as provided one structure for that in Infotype it self so you can add custom fields to there, the procedure is:
Goto T Code PM01 -
> there enter infotype number(i.e 1,2,3........)
then the third button is an enhancement button select that
then it will drag you to one structure PSXXXX (ex: PS0000, PS0001 .......)
there you can enter your custom fields to add,
then save it.
it will get reflect in PAXXXX table ,
these will be the procedure.......

Unable to view enhanced field in Data Source

Hi All,
We recently upgraded our R/3 system from 4.7 to ECC 6.0. Now when we are enhancing the data source, the field is visible in the Extract Structure. But we are unable to view it in the data source. We checked out in RSA2 the enhanced field attribute is specified as 'Field in OLTP and BW Hidden by SAP'. We have written code to modifiy the ROOSFIELD table to make the enahnced field visible. But this is the problem with all the data sources. Whenever, we have to enahnce, we have to go thru this process to make the enhanced field visible.
Is it like that we missied out any patch in ECC 6.0 while upgrade? If any person faced similar situation, please help us.

Hi Ravi,
I think you are missing a step here. As soon as you enhance your datasource with new fields, by default, those 2 check boxes are checked ( Hidden and Field in User exit only). You go to RSA6, edit your datasource and here, you can uncheck these added fields so that you can use them. You do not need to write any code to change the fields settings in ROOSFIELD table. Do the step I mentioned above after enhancing and you should be good. Hope it helps.
Thanks and Regards
Subray Hegde

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

Regarding to enable transfered option for enhanced field in BI 7.0

Hi Experts,
I am working on a requirement for which i have enhanced fields at RSA 6 extractor level and then I removed hide options from those enhanced fields and then I had replicate it at BI system but then what happen na for those fields that i have enhance transfered option at DataSource level in BI side is not enable.Even at Bi level edit button at DataSource level is disabled.So I cannot even edit it.Iam using Emulated DataSource ( 3.5 DataSource ) in BI 7.0.The DataSource is available in activate version.Can any body suggest any thing how to enable transfered option in BI 7.0 when it is disabled.
Thanks & Regards
Vinod kumar

Hi
Check if you have Authorization to Replicate/Change / Active for the DS, BASIS Team can help you with this.
R/3 side
Recheck for your enhanced / Appended fields at R/3 Side .
Make sure that you have saved/Activated the Code/DS/Structure.
RSA6 -- Check your DS for the enhanced Fields again / Transport the Same again.
BI Side
RSA13--Source System --Say Replicate DS -- Now see if you can access the enhanced fields here.
As you said you are using emulated DS -- Check if your Transfer/Update Rules are Active for the DS.. Try to activate the same with RS_TRANSTRU_ACTIVATE_ALL / RSDS_DATASOURCE_ACTIVATE_ALL/ RSDS_UPDR_REACTIVATE_ALL...
Hope it helps and clear

R/3 APO Integration: Enhanced Fields not transferred

Hi,
My requirement is when I change the value of an enhanced field in a material in MM02 in R/3, the change should be reflected in the corresponding product in APO.
I want to enhance the Material Master in R/3 and APO with a Z field. I have done this by enhancing the MARA table through an APPEND structure and /SAPAPO/MATKEY using the Customer Enhancement Structure CI_MATKEY. And also I have enhanced the Customer Enhancement Structure CI_MTKYCUS for mapping of the enhanced Material Matser field between R/3 and APO. After that I have written the logic inside the Exit Function Module EXIT_SAPLCMAT_001 in R/3 for the mapping of this new field with APO.
But the problem is that still the value of the newly enhanced field is not getting updated in APO. Please advise how to solve this issue.
Regards,
Rahul Muraleedharan.

Hi Ravi,
1) During deployment run, based on the transportation lanes that you have
maintained, system will consider the available stocks as receipts and
creates stock transfer requests (ie Dep conrel). These orders are
intermittent elements and will be generated during deployment process
and will not be transferred from APO to R/3 and will remain in APO
itself.
2) During TLB process, the request orders generated during step 1
will be considered and the stock transfer requestes will be converted
to stock transfer orders or otherwise called STOs. These STOs or
conrels will transfer from APO to R/3.
Hope it is clear now. Please confirm
Regards
R. Senthil Mareeswaran.

Data not populated for Enhanced field

Hello,
I had done enhancement by adding field to the LO Datasource.
Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
What is the reason that i am not able to see the data for the enhanced field in RSA7?
Thanks in Advance!
Regards
M.A

Hi M.A,
This means that there is no delta data for that field.
If there is no change in the data for that field then you cannot see any data in RSA7.
Check in the Delta repetition in the RSA7 for any data for that field.
Regards,
ravi Kanth

Set up table contains the enhanced field information?

Hi Experts,
I am enhancing a field in the datasource 2lis_11_vaitm,
Things i did :
1.Enhanced the ext.structure with the required field.
2.Activated the ext.structure.
3.Witten the logic in the CMOD.
4. Deleted the Setup table and refilled.
Now my question is :
1.Did the setup table contains the ENHANCED FIELD with the historical data ?if so where to see that?
I checked in RSA3 the enhanced field is displayed with the records.
The code i have wriiten is WHEN "DATASOURCE " then -> logic from the base table.
Now will the data come from the base table or from the setup table?
Can any one help me in this issue.
Best Regards
Jelina

Why do we need to delete the setup table after doing enchancement with standard Datasource.
Ans :
You neednot refill the setup table just because you enhanced the datasource.
You need to delete and refill if the postings happened after you filled the setup table.
Meaning you will miss the current posting.Unless you have done a init in BI/BW side.
Hope this helps.

How to pass enhanced fields in BAPI_PO_CREATE

Dear Memebers,
I have a requirement to pass the Enhanced fileds in Module Function BAPI_PI_CREATE using VB.NET can anyone send me sample.
Thanks,
Nasir

Dear Nasir,
In order to pass enhanced fields to the BAPI_PO_CREATE function module, populate a table of type BAPIPAREX and pass it to the EXTENSIONIN tables parameter of the FM.
(Sample Code): Suppose you enhanced Purchasing Document Item Table EKPO with Append structure ZEKPO with the fields ZNAME1 and ZDATA1.
DATA: GT_EXTENSION TYPE TABLE OF BAPIPAREX,
WA_EXTENSION TYPE BAPIPAREX.
CLEAR WA_EXTENSION.
WA_EXTENSION-STRUCTURE = 'ZEKPO'. " 'Name of the Append Structure for Standard PO header/item table'
CONCATENATE WA_EKPO-ZNAME1 WA_EKPO-ZDATA1 INTO WA_EXTENSION-VALUEPART1. (Ensure that the total character length of these fields is less than 240)
APPEND WA_EXTENSION TO GT_EXTENSION.
Similarly, you need to pass the ZEKPOX structure with the relevant check boxes. For this, you need to refer to the documentation for Function Module but generally, Passing Enhanced Fields work this way.
Regards,
Amit Sharma

Enhancement fields

Hello Guys!
I need help with Note 762984:
"All enhancement fields which you defined within the SRM Server can only be sent to other systems (SAP EBP, MM) if these are also contained within the XML definition. For this purpose you must enhance the XML definitions of the individual documents in the XI Integration Builder and afterwards regenerate the proxy classes into the SUS system (and into the EBP system). You can find an exact description of these two processes under http://service.sap.com/xi -> Media Library -> Guides"
I'd like to create enhancement fields for purchase orders and purchase order
conformition, but I'm not able to find any Guide!
Could anybody send me ([email protected]) a documentation about that and enhancement fields in XI in general?
Thanks a lot,
Barbara

Hi Barbara,
Refer this...
Might be very usefull for you...
enhancenents
/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/frameset.htm
regards,
vasanth.

Update BDCP table custom infotype custom field

Hi All,
I have created a custom infoype and added a custom field with in this infotype.
I have clicked change document button for the dataelement.
When i changed the value with in that infotype the entry is not updating in table BDCP.
When i changed the value in standard infotype the value is updated in table BDCP table.
Is it possible to update the BDCP table for custom infotype custom field.
If yes please let me know the procedure.
Thanks,

Hi Tarangini,
Check the below transactions once again:-
BD61 - To activate the Change Pointers
BD50 - Activate the change pointer for the message type
BD52 - To include the fields which needs to be tracked
BD66 - Maintain Segment field and change document field.
Check all the above transactions once again and you could resolve the problem.
Thanks,
Mahesh.

OM INFOTYPE ENHANCEMENT ( FIELD ADDITION)

Similar Messages

Maybe you are looking for