OMB command to set the location of an ODBC module

I am writing OMB scripts to deploy an OWB project to a production environment.
In the deployment script, I set the location of an Oracle module using the OMB commands :
OMBALTER ORACLE_MODULE '<modulename>' ADD REFERENCE LOCATION '<locationname>' SET AS DEFAULT
OMBALTER ORACLE_MODULE '<modulename>' SET PROPERTIES (DB_LOCATION) VALUES ('<locationname>')
I also have an ODBC module for which I need to assign a location in the same way
What is the OMB syntax to achieve this?
OWB version 10.2.0.4

You can use GATEWAY_MODULE for these. For example ...
OMBALTER GATEWAY_MODULE '<modulename>' SET PROPERTIES (DB_LOCATION) VALUES ('<locationname>')
Cheers
David

Similar Messages

How to set the location of a button (in an applet)

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

supahsain08 wrote:
Well i did this
Triangle.setLocation(50, 100);
(where Triangle is a buton)
it doesn't do anything, stays at the same placeIt's all about context here and there are still many unknowns here that can effect your result and that you have not told us or shown us. My suggestion to you is to consider posting an SSCCE (Short, Self Contained, Correct (Compilable), Example, a condensed program similar to your current program in that it demonstrates the problem at hand, but is the smallest bit of code that still compiles and has no extra code that's not relevant to your problem. For more info on SSCCEs please look here:
[http://homepage1.nifty.com/algafield/sscce.html|http://homepage1.nifty.com/algafield/sscce.html]
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you can will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck, pete

How to set the location of a button

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

Do not make duplicate posts.
http://forum.java.sun.com/thread.jspa?threadID=5293505&messageID=10240164#10240164

Where can i set the location of the LogonTicket cookies in the visual admin

hello:
where can i set the location of the LogonTicket cookies in the visual administrator?
thanks!!

Hi,
When the SAP LOGON ticket Expired or if we need to update the dates, it is generally done at the Visual Administration Level. SAP Logon Ticket is represented as cookie in the Browser which will help us for SSO.
In Visual Admin under keystore admin where our Old Portal certificate exists.
We will need to delete the old portal certificate, then we need to generate new ceritificate and a pop box will appear.. where we need to provide our System details like SID, Client. After these details are given we can get a new certificate in which validity period dates are automatically generated. And also we can import teh same into Portal at Sys Admin->sys config->key store admin for it to be available as .PSE or .DER file for SSO.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/59bba290-0201-0010-468b-cd12efda573a
check the above for EP security guide which might help you in the same.
Regards,
Ravi

How can i set the location of my pictures in photos app for mac osx?

Not every photo I import into my MacBook have all the metadata in them. iPhoto allowed for setting the location, but in Photos I cannot manage to do so. Is there another way to do it or perhaps it's coming with an update?
Thanks
MacBook Mid-2010
OSX Yosemite 10.10.3
Photos 1.0

Adding location data is not yet supported in Photos.
And we do not know, if future updates will support this feature. It might help, if you send back feedback to Apple with a feature request. You can use this form: Apple - Photos - Feedback
As a work-around, use third party apps to add location data before you import the photos to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, there are many more ..
I use Jetphoto Studio, but it is not free.

Can anyone tell me how to remove the owner when setting the location

Hello,
Can anyone tell me how to remove the owner when setting the location?
Properties
   Table Name: (Table Name)
   Table Type:   Tables
   Owner:           Public
   Overridden Qualified Table Name: (Table Name - same as above)
Any help would be appreciated.
Thanks
Ann

Hi Ann,
please check this document to determine the correct space for your question:
Find Topic Spaces on SCN (Forums)
If you need help moving it, let me know!
Thanks,
Kristen

Setting the location in 5760

I am trying to find a way to set the "location" information in the WAPs that are connected to the 5760. When I try to make the changes manually via the web interface, the changes don't stick. I have not found out how to make the changes via CLI. Any assistance in figuring this out would be greatly appreciated.

CCX Location Measurement Q – Default is off; enable if you use the CCX location features:
ap dot11 24/5ghz rrm ccx location-measurement <cr>
Use the no form to disable.
Refer
http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/Radio_Resource_Management_Configuration.html

[svn] 1657: Rebuilt our modified Batik and Velocity JARs after setting the file properties correctly on modules /thirdparty.

Revision: 1657
Author: [email protected]
Date: 2008-05-09 17:37:18 -0700 (Fri, 09 May 2008)
Log Message:
Rebuilt our modified Batik and Velocity JARs after setting the file properties correctly on modules/thirdparty.
Modified Paths:
flex/sdk/trunk/lib/batik-all-flex.jar
flex/sdk/trunk/lib/velocity-dep-1.4-flex.jar

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Would like to automate this Powershell command that sets the UPN of all mail enabled users

I have command that changes the UPN of all mailbox users
Get-ADUser -Filter * -properties homemdb | where {$_.homemdb -ne $null} | ForEach-Object ($_.SamAccountName) {$CompleteUPN = $_.SamAccountName + “@contoso.com”; Set-ADUser -Identity $_.DistinguishedName -UserPrincipalName $CompleteUPN}
The command works using the AD module for
powershell. What I would like to do it write a script that does the following.
Runs the command above
Only applies changes to users that need it. (I think this applies the setting to all users with the "homemdb")
I was thinking of setting it as a scheduled task on one of the Domain Controllers. My
powershell skills are lacking at best, so any guidance on how to set this up would be much appreciated.
Thanks

Cannot bind parameter 'Filter' to the target.
Exception setting "Filter":
"Invalid filter syntax. For a description of
the filter parameter syntax see the command help.
"(RecipientType -eq
'UserMailbox') -and
(UserPrincipalName -notlike
('*@{1}' -f $UPNSuffix))" at position 68."
    + CategoryInfo
: WriteError:
(:) [Get-User],
ParameterBindingException
    + FullyQualifiedErrorId
: ParameterBindingFailed,Microsoft.Exchange.Management.RecipientTasks.GetUser
Read the error very carefully: "Invalid filter syntax"
You filter: "(RecipientType -eq
'UserMailbox') -and
(UserPrincipalName -notlike
('*@{1}' -f $UPNSuffix))"
This is not a good filter for anything.
This is not legal in a filter: (UserPrincipalName
-notlike ('*@{1}'
-f $UPNSuffix))"
See filter syntax for rules on the limited support for PowerShell syntax.   filters are a subset.
¯\_(ツ)_/¯

How can I set the location of the files for My Digital Editions?

When I installed REader for PC it set up as its file location a location which makes no sense to me and I want to move it nto My Documents. How do I do this without REader for PC "losing" its files?

Adding location data is not yet supported in Photos.
And we do not know, if future updates will support this feature. It might help, if you send back feedback to Apple with a feature request. You can use this form: Apple - Photos - Feedback
As a work-around, use third party apps to add location data before you import the photos to Photos.
You could, for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, there are many more ..
I use Jetphoto Studio, but it is not free.

SCPI command to set the frequency for power measurement on Agilent 53147A?

Hello,
I am trying to automate some measurements which require me to use an Agilent 53147A Freq Counter/Power Meter/Digital Voltmeter. The instrument has an option of setting the frequency of the signal we intend to measure. This is done by clicking the "FREQ" button on the instrument and entering the frequency value of the signal whose power we intend to measure. This way the power meter uses the appropriate calibration factor for that frequency for providing accurate signal power level.
I have been trying to set the frequency of the signal whose power I intend to measure through remote control but have not met success as I have not been able to find the SCPI command associated with this task in the operating manual. Does anyone know what SCPI command is to be used for this purpose? Any comment in this regard is highly appreciated.
Thank You,
Vivek

Hi vivek.madhavan.13,
Try using the drivers for this device found here:
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=834204A36619504AE04400144FB7D2...
Then, by going to the lowest level that the VIs permit, you may be able to find the SCPI commands your application needs.
Regards,
Joel I.
Applications Engineer
National Instruments

SetLocation does not set the location

Hi,
I have just come to a very strange problem. I cloned a JComponent after implementing the Cloneable interface. The second object is moved across a work sheet and then setLocation is called on the first element using the second element's position, i.e.:
JComponent c2 = c1.clone();
c1.setLocation(c2.getLocation());
The strange thing is that after this statement, the location of the first component is not changed. But if I use fixed constants, e.g.
c1.setLocation(new Point(300, 300));
everything works fine.
I hope someone can help me as cloning seems to be the only method in my case (components can be user-implemented, so cannot use serialization)
Tilman

I tried c1.setLocation(new Point(c2.getLocation())); but without success. Meanwhile I found out, that the location of the first component is only set if the second component has a different location. I have the impression that both object somehow share an object that causes this problem because it has not be cloned.

Setting the location of HspEventLog.log

Hi. Can anyone tell me how to change the location of HspEventLog.log? In our Development environment it currently resided at the root of C: which makes no sense at all. I suspect this is set using the configuration utility - correct? We are using Planning 9.2.
Thanks
Sean

jts wrote:
Sean,
Trying a stab I had the same problem with planning logs and John told me the path set is in the regedit of your Planning server. In (going by memory) HKEY_Local_Machine/Software/Hyperion/Planning
In here is two entries for error and out files. You know they are correct if they have a path of C:\
JTSHi,
Are you not getting confused with setting the error files for the standard planning web application, this is different than the hspeventlog.log which is created from using the planning desktop.
It has been a while since I have used 9.2 but maybe it is defined in the planning desktop, the system folder setting?
Cheers
John
http://john-goodwin.blogspot.com/

Set the location of JOptionPane

Hi all,
i want to show a "JOptionPane.showConfirmDialog" in a specific location on the screen.
i need the location to be ABSOLUTE and not to be relative to the parent of the JOptionPane.
i tried to make an instance of the JOptionPane then apply the method "setLocation(int x , int y)" then show it using setVisible
but this don't work
so any suggestions ???!!!!
thanx in advance

experiment with x,y in this
(optionPane's middle will be at x,y)
import javax.swing.*;
class Testing
public Testing()
    int x = 100,y = 80;
    JFrame f = new JFrame();
    f.setUndecorated(true);
    f.setBounds(x,y,0,0);
    f.setVisible(true);
    JOptionPane.showMessageDialog(f,"I should appear near: "+x+", "+y);
    System.exit(0);
public static void main(String args[]){new Testing();}
}

Setting the charset from an adapter module

Hi folks,
I'm trying to set the charset encoding of a payload using an adapter module (I know there is a TextCodepageConverterBean, but I want to set the charset for a message that hasn't one yet). The problem is probably more clear using an example.
I output a UTF-8 flat string from my message mapping to the adapter framework (mail adapter in my case). Afterwards I want to convert this UTF-8 string to an ISO-8859 encoding with the TextCodepageConverterBean. But if I set the charset using the setContentType() function of my TextPayload object the information gets cut away. I'm using the format
setContentType("text/plain;charset=utf-8;name=Test.txt")
. But everything after the first semicolon is dropped. Setting the charset using the MessageTransformBean works, but I want to avoid this by all means, as I need to set the mime type from the adapter module.
This is running on NW2004 with SP 16 and the latest patch.
Any idea, why the MessageTransformBean works and not the setContentType call?

This bug will be fixed with SP20.
Regards
Stefan

OMB command to set the location of an ODBC module

Similar Messages

Maybe you are looking for