OMBPLUS - check deployment status

Thanks all for reading.
How can I check the deployment status of an object? I want to be able to DROP existing items prior to CREATEing them, but if the object is not currently deployed, the DROP will result in a failed deployment.
Am I considering this the wrong way? Should I attempt a DROP on items to deploy as one DEPLOYMENT_ACTION_PLAN (capturing or at least ignoring errors) then put CREATE items in a different DEPLOYMENT_ACTION_PLAN? I can run a sql query to tell me the same information, but I am pretty clueless on how I could run a sqlquery from a tcl script.
Suggestions would be great,
Thank you!

Hi,
your approach is valid. First use an action plan with DROP and ignore the result. Then use an action plan with CREATE. This deployment should always run successfully.
Regards,
Carsten.

Similar Messages

Need help to check the software update deployment status before restart the VM

Hello,
I'm just trying to automate the windows patch deployment for several VM's, I build the entire logic like below,
Deploy software update --> wait for sometime-->Restart --> Check deployment status(collection = iscomplaint) -->stop
I know here I'm missing the logic of not checking the patch deployment status before restarting, Can someone help here plz?
Regards,
Julie

Hello
you can configure a loop for your Activity " Get deployment status(filtered the collection name " until status is succeeded, failed with an embedded loop: http://technet.microsoft.com/en-us/library/hh403826.aspx
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Deployment Status not reflecting correct application installation status

Morning All,
Running into an issue where the application Deployment Status does not properly reflect the state of the application install.
The software installs, works properly and is reported in Software Center on the client PC as being installed succesfully however the status within CAS shows "In Progress" with a description of "Program started".
The application in question is Cisco Network Access Manager which terminates the network connection and requires a reboot before restoring. Additionally the site is behind a NAC switch which adds another layer of security to the network at that loation.
Currently I have deployed to 90 test machines - 65 of which have reported in as succesfull, the remaining 25 have installed and are working but are not being updated in the Deployment Status.
I have checked the Sender.log on the site server and link analyzer between the primary & secondary. I have also checked the client heartbeat and statemessage.log all seems well - no errors reported.
Additionally I have reviewed the WMI status on the client and repaired (just in case).
Through google search I have also ran the following:
Option Explicit
On Error Resume Next
Call RefreshServerComplianceState
' WScript.Echo "Finished"
Sub RefreshServerComplianceState()
' Initialize the UpdatesStore variable.
dim newCCMUpdatesStore
' Create the COM object.
set newCCMUpdatesStore = CreateObject ("Microsoft.CCM.UpdatesStore")
' Refresh the server compliance state by running the RefreshServerComplianceState method.
newCCMUpdatesStore.RefreshServerComplianceState
' Output success message.
' wscript.echo "Ran RefreshServerComplianceState."
End Sub
As well as forcing a check in from the client and running the summarization on the CAS.
So far nothing seems to trigger an update. I'm hoping someone can point me in the proper direction in regards to diagnosing this problem.
Many thanks, Jeff

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Update Groups Not Providing Deployment Status

Software Updates Groups for Windows 7 were created on a monthly basis from November 2013 to June 2014. Each of these deployments are having issues reporting any data in the "Deployments" Section of SCCM.
Patch groups created prior to November 2013, and Past June 2014 appear to be fine, and are distributing content and installing updates with ANY issue.
Upon recreating the "broken" patch groups - nothing appears to change. I've went as far as to deleting the content, and renaming everything, recreating all the groups, and still no luck.
Any suggestions regarding why these groups may fail to provide any deployment status?

Hi,
Have these updates been installed on clients? What's the status in the Deployments section? Please check the deployment status from software update reports.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Devices in Deployment status show up as Non-Compliant

In the deployment status section of SCCM 2012 we have 6 of the 10 servers listed in the In-Progress tab which are Non-compliant. 3 of the servers are list as Downloaded Updates. Verified that the boundaries are set up correctly and check relevant logs and
no software updates are being pushed out to the servers almost an hour into the maintenance window. Not sure what the cause is, could use all the help I can get. Thanks!

Hi,
Is the client healthy?(CcmEval.log, ClientIDManagerStartup.log, ClientLocation.log, LocationServices.log)
Could the client communicate with MP? Please check CcmMessaging.log and open
http://<MP Name>/sms_mp/.sms_aut?mplist in IE on the client to see whether it can find the MP.
Best Regards,
Joyce

OMB to find out deployment status of an object

Hi all,
I am creating an OMB script to deploy all objects in a collection. I use that to promote new developments to e.g. the acceptance environment. Objects in the collection may already exist and be deployed to the database. In the case of a table it is relevant to know if the table is already deployed to the database because you do not want to destroy data already in the table. I would like to use an UPGRADE for that table as that will preserve the data and is possible in most cases.
Now I am looking for an OMB command to retrieve the deployment status so I can determine if I must use an UPGRADE or a CREATE. It seems I can't find it in the docs? Is this possible in any way?
I can find the status using the all_iv views of course, but since I am working from a tcl script, I would prefer an OMB command.
Kind regards,
Eric.

Hi Eric,
I've never saw such OMB command. You can try approach (using JDBC in OMBPlus) described here {message:id=3691751} .
If your design and runtime repositoris located under the same database you can avoid creating new JDBC connection - since OWB 10gR2 it is possible get JDBC connection to OWB repository like this (before you need grant from Design Center system privilege ACCESS_PUBLICVIEW_BROWSER to user under which you plan to run script)
set repMgr [java::call oracle.owb.connection.RepositoryManager getInstance]
set jdbcConn [$repMgr getPublicViewConnection]
set connStatus [$jdbcConn isClosed]
puts $connStatusRegards,
Oleg

NWDS - Get Deployment Status - Problem

Hi!
I really need help with my NDSW (7.1 SP03 PAT0001).
Also two of my colleagues have the same problem but unitl now we haven't found a solution.
There is a progress called "Get Deployment Status". It runs till the end of time. It even ignores the cancel operation.
Unfortunately it is blocking all other tasks, and as stated, it cannot be cancelled.
Does anyone here know this problem and perhaps has a solution for it?
Many thanks in advance!
Cheers,
Andi

Hi Andi,
Please check the server logs at usrsapJ2EJC00j2eeclusterserver0logsystem There are files there with .log extension.
JC00 is instance which can be different for you.
Also check : http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/58a7e390-0201-0010-abb1-8eec7eb7a2ec&overridelayout=true
You can also find the Application log in
C:Documents and SettingsUserDocumentsSAPworkspace.metadata.log
where .log is the Application Log file.
Check if you can find soem exception or need some parameter tuning accordingly.
Regards,
Rajani

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to check the status of a job!!!

Hi,
i want to check the status of a job and also send a mail when a job is cancelled.
Is there any function module which does that , also i want check the jobs across various time periods and not of today....
Its urgent,
Answers will be rewarded,
Regards,
Rohan

Hi Rohan,
You can get job information by <b>calling function "BP_JOB_READ".</b> If you pass the value btc_read_jobhead_only defined in LBTCHDEF, it will only return the
job header info into the export parameter JOB_READ_JOBHEAD. The job status
is set in JOB_READ_JOBHEAD-STATUS.
Alternatively, <b>you can just lookup table TBTCO</b>, the status is in
TBTCO-STATUS.
The values in STATUS are defined in LBTCHDEF as follows;
DATA:
BTC_RUNNING LIKE TBTCO-STATUS VALUE 'R',
BTC_READY LIKE TBTCO-STATUS VALUE 'Y',
BTC_SCHEDULED LIKE TBTCO-STATUS VALUE 'P',
BTC_RELEASED LIKE TBTCO-STATUS VALUE 'S',
BTC_ABORTED LIKE TBTCO-STATUS VALUE 'A',
BTC_FINISHED LIKE TBTCO-STATUS VALUE 'F',
BTC_PUT_ACTIVE LIKE TBTCO-STATUS VALUE 'Z',
BTC_UNKNOWN_STATE LIKE TBTCO-STATUS VALUE 'X'.
Thanks,
Vinay

Checking the status of task records tied to the custom object 3

We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
Nitika

To whom are you speaking?

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

5 error while checking job status

Hi,
We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
5 error while checking job status.
The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
Can anybody help why we get the error.
Regards,
Shashank

Hi Shanshank,
Try to Debug the FM.
Rgds,
Ravi

Checking the status of the insert query in JSP

frendz,
i am working with JSP .i have some content to be inserted in the database.i have used the insert query in SQL for that.i am able to check whether it has been inserted properly in the SQL but i want to check the status of the insert query with its return value(so that i can confirm it does not return a error).so please help.

The Statement#executeUpdate() returns an int with the row count. Get hold of it.
Also see the Statement API: http://java.sun.com/javase/6/docs/api/java/sql/Statement.html
Apart from this, I recommend you to use PreparedStatement instead. It will not only ease setting Java objects in a query (no hassle anymore with quotes), but it will also prevent you from SQL injections.
Prepare here: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
SQL injections: http://en.wikipedia.org/wiki/SQL_injection

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OMBPLUS - check deployment status

Similar Messages

Maybe you are looking for