On 01/22/2013, facetime will not connect to my husband's phone. We talked this morning at approximately 8am PST and since then it just goes to connecting...and stalls...whats the problem?
On 01/22/2013, facetime will not connect to my husband's phone. We talked this morning at approximately 8am PST and since then it just goes to connecting...and stalls...whats the problem?
Nobody here would know what the problem is.
Similar Messages
-
Facetime will not activate on my iphone 5. Screen says "waiting to activate". Tried turning it off then on to no avail. I'm on wifi.
That was the first thing I tried and all that happened was it took a picture of the screen (I saw that in my photos folder when the phone finally came back to life).
I tried again with syncing it in itunes and it took a while but eventually it kinda reset itself and I did have to redo the set up again but it's working fine now.
And surprisinly none of my data/pictures was lost which was odd as I heard that doing the restore would delete it all.
Thankfully it's sorted out now. Was really worried for a second that something was seriously wrong. I've only had this phone for 3 months so it would have been awful having to pay for a replacement. -
Ever since i have started using the latest version 4,0,1, sometimes when i press the back button it opens 7 tabs automaticcly. I have checked my registrey and run several scanners but nothing can be found So whats the problem or were can i check??
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards. -
I recently got told about the new software update for OS Yosemite. It was version 3.8.2 v1.1 and since then my mac crashes a lot, and can't handle simple tasks. Like playing a 3 minute song, checking emails, and even whilst typing this its crashed so many more times than i've lost count. Has anyone else had this problem? And what do you recommend I do?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
My MacBook Pro 10.6.8 prompted me of a new itunes update this morning, so i downloaded it. Since then itunes has been starting up randomly on its own, and starts playing the first song on the list. I pause the song, and it resumes it on its own again. I'm not joking. So, I end up quiting out of itunes; but, it starts right back up again on its own. After quiting out of the app a few times, it eventually stops reopening; however, about an hour later (or less) it opens again. HOW DO I MAKE IT STOP? I'm just about to delete itunes, because I've had enough of this crap. I hope someone can help. I've restarted the laptop, and it seemed like that fixed it, then itunes started up doing the same thing again an hour later. ituneshelper is unchecked; bluetooth is off; i only have speakers and a mouse plugged in (also charger).
Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.
-
Sent a 22 MB file and since then unable to receive e-mails and the file keeps "ghosting back" to my recovered messages folder. Help!
thanks for your reply. I appreciate your taking the time to respond.
yes, I thought my limits were 20 MB, but I let my client talk me into trying to send it anyway (won't be doing that again). I actually spent some time with the apple tech support person (who was awsome!) and he had me delete some files from my mail folder in the Administrator folder and changed some settings in my mail prefernces.
Everything is working fine now. -
I dropped My iPhone 3G it turned off and since then i've tried turning it on & it won't boot through the apple logo, i already tried pressing the home button and the log off one but its the same. what do i do?!
Before you bring it in to the store, you could rule out software by placing the phone in DFU mode and restoring the OS. In the absence of hardware issues, the DFU restore will solve the issue of the phone being stuck on the Apple logo. It will also remove al data from the phone so hopefully you have a recent backup.
To put your iPhone/iPod into DFU mode:
1. Make sure the iPhone/iPod is connected to the computer
2. Hold down the sleep/wake button and home button at the same time for 8 seconds
3. Let go of the sleep/wake button and keep holding down the home button
4. If you are successful, a dialog box will pop up in iTunes stating that iTunes has detected an iPod/iPhone in recovery mode. Note that a successful DFU will result in a blank black screen on your iPhone/iPod.
5. Click OK, then click the restore button in iTunes.
Hopefully after that you will be able to resync your data and be good to go.
Hope this helps. -
I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas?I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas? -
Hello there ive just downloaded 2 albums from itunes store and found that they only play for a short while and then flips onto another tune which again only plays for short while so on and so forth which makes the albums completely useless does anyone have a solution?
Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2 -
Firefox will not start or reset or respond. Worked fine this morning
<pre><i>Locking duplicate thread.
Please continue here: [[/questions/985491]]
</i></pre>
It had been running slow and hanging up. Now has completely quit. Reinstalled 3 times. Will not run in safe mode. iMac running OS 10.9.1. Will not launch. Shows as not responding.I have provided a answer to the dupe.
* https://support.mozilla.org/en-US/questions/985491#answer-530457 -
FCP 10.2 on my iMac and MBA are crashing on launch
I had the same crash type as Pajero Fan and Kidago, except my machine is a iMac mid-2011 12GB RAM, AMD Radeon 6770M, Yosemite 10.10.3 fresh install and FCP 10.2. My crash was very similar to the AMDRadeon but mine is with the AMDRadeonX3000GLDriver.bundle.
Crashed Thread: 4 Dispatch queue: NSOperationQueue 0x600000c26840 :: NSOperation 0x600000a593e0 (QOS: USER_INITIATED)
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000196aa1003
VM Regions Near 0x196aa1003:
Image IO 0000000196a9e000-0000000196aa1000 [ 12K] rw-/rwx SM=PRV
-->
__TEXT 0000123480000000-000012348029b000 [ 2668K] r-x/rwx SM=COW /System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/MacOS/AMDRade onX3000GLDriver
I created a new user account, and FCP 10.2 launched and works fine. However, using 3D Text gives an FCP warning that my hardware is not capable of doing 3D text.
Back as my original user account, I did a Repair permissions and found a TON of group/user issues such as,
User differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; user is 502.
Group differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; group is 20.
(BTW, user 502 is the UNIX name for the new user account I created.)
That DIDN'T fix it.
Using Find Any File I was able to delete the "Layouts" folder, and FCP launches ok, but any attempt to start a new project, import a file, results in a crash. Maybe related to the 3D text feature. -
Weird! It suddenly seems to have corrected itself. I will get back if it happens again.
Thank you for responding. I'm not sure if my complete original message came through. It was just today that an automatic update notice came through, and I installed the update that was offered. So I have to guess that version — 10.1.10 — is the latest version that's available to me. My OS is 10.6.8. Again (in case the complete message isn't appearing), I'm on an older Mac, specifically MacBook 2.1. Perhaps this is the problem, and I never should have updated a few years ago. If so, I wonder if there's any way I can go back to that earlier version that worked well for me, rather than the last few versions, which have not.
-
Dear gentlemen:
i know how can update ios update but when i make update my iphone shut down and it can't start.
it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
thank youContact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
So Im Recorded Videos And When I Play Them All I Get Is Static Whats the Problem?
Help Please!!!
Does the Voice Memos app work? That is a good test of mic and recording with it.
Is the mic hole unobstructed? It is the little hole on the back side of the iPod next to the camera lens.
Maybe you are looking for
-
How can I tell if my Logic 7 is academic
I purchased Logic 6 academic version years ago (still emagic). I purchased Logic 7 upgrade back in 04. No problems. The box sticker just says "logic 5/6 gold upgrade". I checked splash screen, the XS key...nothing refers to academic. I want to purcha
-
Hi, PLEASE HELP!! Last night my boyfriend asked me to sync his phone as he had purchased a new app and it was required to connect to iTunes to finish installing, so we did this, it took forever!! It also prompted us to upgrade to iOS5, which we did
-
Unable to open CR2 file in elements 11
Everytime I try to open a CR2 file i get an error saying "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentatio
-
All functions in FUNCLIB record can be moved to Application Class?
I am new comer for PeopleCode. I find many functions are put into a work record, like FUNCLIB. I want to know if some logics only are able to be coded in work record as function due to some restrictions or convenience. If yes, what are the restrictio
-
How to convert 6i function keys file to 10g
Hi, is there any way how to migrate 6i Forms binary resource file with function keys to 10g Forms text-based resource file with function keys (e.g. fmrcsw.res -> fmrweb.res)? Thx.