On export, embedded flv video restart issue

After exporting my project (either as SWF or MOV), when I play the exported file, the flv video I have embedded in the timeline starts over whenever a motion tween begins in a separate layer. Why might this be happening? I'm using CS6.

Ah, figured it out. Totally my fault- in playback within flash, the video freezes on its final frame, which was the effect I intended, but on export embedded flvs apparently repeat, so I just took a screen shot of the final frame and put that in for the duration I wanted the frame to stay frozen. Your suggestion actually led me to this realization, thank you.

Similar Messages

When I publish as an .mp4, the embedded .flv videos clip at the end

I am using Captivate 6.0.1.240. I have .flv videos that were encoded using Adobe Media Encoder from a .mov file. The videos are embedded on the slide, as multi-slide synchronized video, but only distributed across one slide (as strange as this might seem, it is what was recommended to me because using Event Video resulted in choppy video).
Now, the videos clip off a second or so before the end of the video. There are no transitions on the video slide or on the slide following it. I have tried extending the length of the slide beyond the length of the video, to no avail.
What am I missing? How do I get the embedded .flv videos to play fully?

Hi there,
As you told you have checked that there is no transition on the Slide on which you have the video.
Have you checked the transition effect on that video, whether Fade out only or fade in and fade out is selected. Select that multi slide video and click on the properties panel and check the transition on it.
Also, if this video is on the last slide, check the fade in and fade out on the project. (edit > Preferences > Project > start and end)
Thanks.

Embedding FLV Video Into PDF Files

I have been testing out embedding FLV files into PDF's to simplify presentations (no need for Powerpoint, DVD player, DVD player software, etc..). It is a bit slow when a big video file will load, but I think it is worth it for the simplified presentation method.
My problem is this, whenever I embed an FLV file into a PDF, it seems to degrade the quality down a notch or two. I am not concerned about file size since these will always be played locally from a hard drive or CD so I created the embedded FLV file to be high quality and very crisp (720 x 486, ~2200kbs bit rate). However, no matter how good a file I embed, after it becomes embedded it always looks worse. At this point, it has mainly been trial and error, but the original quality does not seem to matter as to how it will look in the PDF.
Does Acrobat Pro re-encode the video no matter if it is FLV or not? And is there anyway to change the settings so it does not alter the existing quality?
Thank you.

Are you inserting a screen capture FLV of the whole screen. I use camtasia Studio to capture my desktop in video... and if the playback is NOT at the same size as the original...then it can look blurry.

IMovie: exporting to Google Video/mp3 issue

I would like to export an iMovie project to a format that Google Video accepts. Google Video prefers mpeg 4 video with mp3 audio. iMovie "expert settings" allows mpeg 4 export, but the only audio options for this are AAC or "none". Does anyone know how I can either:
- Add some type of plugin or installable codec that enables mp3 audio with mpeg 4 video as an iMovie export option?
- What software to use to convert from another iMovie export format to mpeg4/mp3?
I currently own Toast 6 and standard Quicktime.
Any advice much appreciated!

"MPeg Streamclip" is a free download. Get it and install it in your applications folder. It is a totally great application for doing all kinds of conversions. Export your iMovie project to Quicktime format. Then fire up MPeg Streamclip and drag your quicktime movie to the pane and drop it. Go to 'File' drag to 'Export to MP4' and another screen will open up. Choose "iPod" this setting works great for the Google videos. Trust the settings chosen by Streamclip. It may take a while to convert, but when finished, you wil be able to upload to the Google video upload page. You may want to do this before going to bed. It wil be ready when you get up! I have 4 videos on the Google site. I did all four by using "MPeg Streamclip" My latest upload is "Feather Falls 2006" Check it out and good luck

Embedded Youtube video sound issues HELP!!

Hello.
This is my site http://mattpartridgeanimation.com/
In my 'animation' section I'm loading youtube clips to my site using this AS3 script found here.
This all works fine but when i use my buttons created in flash to load the new container_mc, the sound of the old video keeps playing. Does anyone know any AS3 script that will stop the youtube video sound playing when you click to load another video.
I'm pretty new to all this so any help would be great. Cheers

Hi,
I found the same problem but, according to YouTube AS3 API reference, I solved it with the special function:
player.destroy();
It works. Just replace "player" with the instance name of your youtube player.
Quote from the documentation:
You should always call player.destroy() to unload a YouTube player. This function will close the NetStream object and stop additional videos from downloading after the player has been unloaded. If your code contains additional references to the player SWF, you also need to destroy those references separately when you unload the player.
Best,
Toz

Flv videos not playing on html files - UNC/Mapped Drives

Hi,
We've discovered an issue with Dreamweaver CS3 recently (running on Windows 7 Pro, 32bit) in our school, where embedded flv video files wont run when the file's UNC path appears in the address bar, but will if this is changed to the local drive letter, in our case N. This obviously makes it a little difficult for teachers to mark students' work.
I found a similar issue in another thread:
http://forums.adobe.com/thread/688483
which had not been answered. Are there any known solutions for this please? I have spent a while browsing, but have so far not come back with much. I've tried enabling and disabling 'Remove run from start menu' which was suggested, but this didn't make any difference.
Thank you
Regards
Savos Aren

Nathan,
Your welcome, if that is the case, then can you try and insert the MultiSlide Video, you can insert the streaming video URL.
You can add the server to you computer as network Drive and then browser to that location, once you do that, the options to add the Video as Streaming can be chose and your Vidoe would remain insync with main playbar, users can play and pause content that way.
See if this can be implemented at your end.
Thanks,
Anjaneai

FLV Video - Alpha Layer Not Working

Hi I have a strange problem. I am trying to encode a AVI
video into a FLV flash video which includes an alpha layer. These
are the steps I have taken as follows:
1. Created animation in photoshop, saved as PNG files.
Imported files into Flash, and the alpha works great (but the size
is too large, so I switched to embedded FLV video).
2. Took PNG files and imported then in Premiere Pro 2 and
exported the video with the 32-bit Cinepak Radius codec, with a
million colors. (I don't know if its 32-bit, as it says it no where
in the export options).
3. Encode the AVI with Flash CS3 Video Encoder, using On2 VP6
codec with Encode Alpha Channel enabled.
Result, either the clip is completely black or the video
doesn't have an alpha channel when imported into Flash. I am
thinking the clips that are completely black are the AVIs that had
an alpha channel.
Below is the AVI clip, if anyone can tell me if it has an
alpha channel by encoding it to a FLV video OR can offer any help,
thank you.
Animation
Clip
Paul B.
PS. I have searched the internet for hours for related info
or similar problems, but have not encountered a solution. I have
even downloaded Sorenson Squeeze and have tried multiple
codecs.

You set your texture environment mode to GL_REPLACE. The implementation of this feature is to replace the primary color (set via ColorPointer or Color3f) with the sampled texture value, so your color will have no effect.
Replace the texture env mode with GL_MODULATE, which will multiply the Texture Unit Input Color (==PrimaryColor for Texture Unit 1) with the sampled texture value.

Cap 7: project with an .flv video goes to Media Encoder

I have a Cap 7 project that includes a slide with an .flv video embedded. When I try to publish as both .swf and HTML5, the Adobe Media Encoder appears. I have no idea what to do with the encoder, if anything, and the publish process just stalls. Is the .flv video the issue? There is a note in the Cap 7 "publish project as HTML5" help that states that .flv files that are created using On2VP6 codec only are supported in the HTML5 output. Am I missing something?

FIXED!
Thanks to some points in this thread, I have solved my problem.
It was the KNOLL LIGHT FACTORY plug-in. I removed it, and the Adobe Media Encoder now works on my system. I assume that DYNAMIC LINKING between the CS4 apps also now works, but have yet to test that.
This also explains why my CS4 suite works on my MacBook Pro; I never installed KLF on my laptop.
Now I need to tell RED GIANT SOFTWARE about this problem, and either get a solution from them, or a refund.
Thanks. You can add this solution to your collective repertoires in case a future OSX user encounters this exact problem.

Please help me load an .flv video that has been embeded onto a web page

Hello there,
I was hoping someone on this forum could please help me with one specific problem that I am having. I would like to embed the a flash player into an html page, and load the video from a service that has the streaming video provided.
This is the context of the situation...
We have created a site that was to be used on a showroom floor (no internet connection) and loaded the .flv videos at the local root level for the site.
Now however, we would like it to be an online site. I have been able to use the flash "jw player"to load videos to play using the shadowbox javascript, but when I try to embed it onto a page and have it play, it isn't working and I am not sure why.
Below is the code that is currently working to load the videos on the local root level.
Might someone have any ideas on what I need to replace to have it load the videos from the streaming service?
I would greatly appreciate any assistance that could be provided. I can also provide a URL if it would help.
I would GREATLY appreciate any assistance provided.
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("player1","9.0.98","expressInstall.swf");
</script>
<object id="player1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<object type="application/x-shockwave-flash" data="player.swf" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<p><a href="http://get.adobe.com/flashplayer">Get Flash</a> to see this player.</p>
</object>
</object>

Hello,
Thanks a lot for the reply. However, I am pretty confident that the jw player supports the streaming video option, but as I mentioned that I was able to use it as a popup using the shadowbox javascript before. After doing a bit of investigating on how the videos are hosted, I am using "progressive download" method for these videos.
I think the problem is that the player.swf is hosted on my website server - and the videos are then hosted on the media hosting service. I think that the player needs to be located on the media hosting service, and then embedded onto the page along with where to point to the .flv video. Does that sound right?
If so, the paramater I am using to embed the player as I mentioned in my original post is simply:
<param name="movie" value="player.swf" />
does the "value" then have to change to the http:// address for the video player.swf that would then be hosted on my video hosting service?
Little help?
Please let me know if there is anything I can provide to clarify the issue.
Thanks
M

FCP Freezes When Exporting to Flash Video (FLV)

Final Cut Pro 7.0.2 freezes when exporting to Flash Video (FLV). The resulting FLV file contains only a few seconds of the exported video. A 2009 Apple Support notice offers this re. FCP 6 and CS3 Flash Video Encoder...
===
Final Cut Pro: May quit unexpectedly when exporting to Flash
Last Modified: February 13, 2009
Article: TS2593
Symptoms
Final Cut Pro may quit unexpectedly when you export using QuickTime Conversion if you choose Flash Video (FLV) from the Format menu.
Products Affected
Final Cut Pro 6.x, Adobe Creative Suite 3 Flash Video Encoder
Resolution
This can happen if you use the Adobe Creative Suite 3 Flash Video Encoder and Final Cut Pro together. This issue does not occur with the Flash Video Encoder in Adobe Creative Suite 4. To work around the issue:
Choose File > Export > QuickTime Movie.
Be sure to enable Make Movie Self-Contained.
Open the exported movie in QuickTime Player.
Export the movie to Flash from QuickTime Player.
===
I just installed CS5, so I would think I shouldn't be bothered with an older, problematic Flash Video Encoder. I don't think I should have to convert an MOV file to an FLV file using QuickTime Reader or anything else. Why doesn't it export correctly out of FCPro 7.0.2?

oh well.

Help Exporting Embedded Video Files From Flash

I am new to Flash and this may sound, well dumb but here it goes. I have taken some video files from Final Cut Pro converted them to FLV's imported them and embedded them into flash to create some banners for the web. I need to know what settings I should use to get these out of Flash for the web.
Also I need to send them to someone to look at before publishing. What would be the best format to do that in and how to do it.
Also has anyone has any experience creating banners in or online ads in a Video format like FCP and embedding them into a flash file to export them in flash for we publishing. Sorry again for the dumb question, just new to Flash.

Is there a reason why you embedded the video in Flash rather than using the FLV player?
Starting with the video, since you have the source you can create any type of format you need from that which can be used for preview or the final version depending on where it's going to end up and what is required or preferred. Flash comes into play if the requirement is to have a SWF/FLV other than some other video format, or if you have other Flash content going on at the same time besides the video.
But using Flash for this, the most stratghtforward way is to use the FLV player included with Flash (or another 3rd party player) and point it to your FLV.

Create a video player for embedded FLV

So I want to embed a FLV in my flash so that I just have ONE SWF that contains everything.
I know if I say "load external video with playback component" I will end up with a swf, html and the flv- this is NOT what I want so please don't ask me why I'm not using this option.
"Embed FLV in SWF and play in timeline" is EXACTLY what I want- the result is just a single SWF.
Here is the question: How do I get a video player if I embed a FLV in flash?
I know if I load the video external I will get some nice players - exactly what I want. How do I get a player if the video is embedded? Are there any coded player templates on the net? I couldn't find anything on google I could use but I've to admit I'm not too good at AS.
Thanks A LOT for your help

Not sure if this will work. Embed the FLV into a movie clip and in the expanded propertied check export for action script. Then you may be able to call the movie clip from the content path in the FLV video component.

CS4: No option to export as FLV in Render to Video

Does anyone know why one installation of CS4 would show the Export s FLV in the Render to Video QuickTime settings, but a different machine doesn't.
Flash CS4 is installed on both machines.

Thanks to Sandie - I have the same problem on a PC - it works on my own HP labtop and stationary Mac with XP with PhotoShop CS3 - but the client's Acer toy-machine - CS4 - it doesent work.
Then I did what Sandie did - copy the Quicktime plugin in QTComponents - the file FLV.qtx - and copy to the clients machine - and it's work fine.
Thank you Sandie. I never gues, that I was the Quicktime that make the mistake.

Need advice/guidance on how to export .FLV videos for my website.

Can anyone help me?
I am trying to embbed a .swf/.flv video into my website,
using dreamweaver and flash cs4. But when i do so, and i load the
video, the .FLV playback componet wont load or the browser dosent
even try to load the data at all, it just plays the video. So users
cant mute, have volum control, pause, stop or anything. Can someone
please help me? i looked all over the net for 2 days and cant find
a single turtorial or anything. I know alot of website use .FLV but
how? and how do you export it?

You need three parts for the flv playback: the swf, the flv,
and the video player skin swf. If you create the flv from your
Flash movie by importing the original video, Flash should make all
of those parts for you. Upload each of these files to your server
and the file should play as expected.
Can you describe in more detail what you are doing that may
be different?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

On export, embedded flv video restart issue

Similar Messages

Maybe you are looking for