On my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needto right the password in the ipad first but cant help please
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam
Similar Messages
-
Please help me - I've just upgraded my Iphone 4s to ISO8 and now I can't connect to wifi - was at my friends yesterday - always use his wifi and even though the password was correct, it wouldn't accept it. Came home and had the same problem. I can't use my data plan as it wouldn't be enough so now it's chewing through it.........The only thing I did different was upgrade......... I'm not computer savy so please leave me step by step instruction on how to fix if you can. I've tried rebooting etc and turning everything off - no luck.......
Have you tried resetting the network settings? Sometimes starting from scratch solves the issue and it is the simplest way I can think of that may solve your problem.
1. Go to Settings > General > Reset
2. Then select Reset Network Settings
3. Enter your password when it requests it
After the phone finishes the reset try adding your Wi-Fi again and see if that works. If not, I would back-up your phone to your computer, then reset the whole phone by following the same instructions above, but choosing Reset All Content and Settings at step two. Make sure you backup your phone first though! Otherwise you will lose all the stuff on your phone when you make this selection.
Good luck! -
I changed my username and Password in Itunes on my computer. Now when I use my Iphone, Ipad, it asks for the password for the old username. when I type the password for that old user name, it says it's invalid. I figured I needed to delete the old Icloud account from my Iphone and Ipad, but they ask for the old password for the Old username. I type it in and it says invalid. As of now, I can't use Icloud or Itunes on either the Ipad or Iphone.... Help!
<Edited by Host>If the old ID ("username") is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I forgot the password on my iPad; I have it backed up on my Mac, so I saw that I just should back up from iTunes. I tried to do that, but it says to first turn off "Find my iPad", which obviously I cannot do because I don't have my password!! Help!
Have you tried using Find My iPad on a computer to remote wipe your iPad?
-
I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!
If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password. -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Dear I-pod users,
I haven't used my i-pod in a long time and I forgot the password It was disabled after countless tries but right now is not disabled.Is there any way I can delete the password on the computar instead of going to the Apple store? ALSO, I believe my I-pod is a second generation (no camera) PLEASE HELP!!!Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
For how to restore:
iTunes: Backing up, updating, and restoring iOS software -
I'm trying to activate my 2nd generation apple iPad. It wants me to sign in with the original apple id used to set it up. I no longer use it and don't know the password to the apple id. Also, the email used to set it up has been deactivated. Can anyone help???
If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
If the Apple ID that was used on the iPad was yours originally you should be able to recover your password here:
https://iforgot.apple.com/password/verify/appleid -
I just bought a iPhone 4s from someone on-line, everything is working correctly however i cannot connect to any wifi, it says that it is unavailable, i know that it could be the wifi chip damaged but the phone is in almost perfect condition. Help please?
Help with what? If the WiFi radio is broken, there's nothing any of us on this forum can do help you. Either go to Apple and pay for an out of warranty replacement, or find a 3rd party repair shop and get the phone repaired.
-
how come i was upgraded iso6 on my iPhone, but now I couldn't link up to iCloud, it keeps asking my icloud password then failed login. But my iPad upgraded it works!! how to solve my iPhone using iCloud?
If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/). -
How can I bypass the password on my iPad ios 7.0.3
Can someone please tell me how to bypass the password on my iPad. I don't need it and it's really annoying to have to enter it every single time. Thanks.
Settings
General
Passcode lock
enter your passcode then you can see the options to turn it off. -
I am new at using an Ipad. My Ipad was connected to my home wireless. I changed the password on my home router and now I do not know how to change that password on my I Pad. Can someone help me?
Tap settings on your iPad
then tap Wi-Fi
click on the blue arrow which is next to the network
a new section will be opened
it will display the router settings and all ( you dont have to deal with it)
then tap forget network at the top
go back and tap your network
iPad will ask the password of the network just enter the new password and you are good to go
if a message appears unable to connect just go back turn Wi-Fi off then start it again
and try connecting to it again
i hope this will help you if not reply me and ask me for more questions.......do reply if it worked -
I have read the older responses to questions re how to change the iCloud account from an old ID/email address (OLD ID) - to a new ID/email address (CURRENT ID). They all say go to Settings>iCloud - and Delete the iCloud account. In iOS 8 - there is no Delete - but there is a Sign Out. BUT - when I choose the Sign Out it shows a pop-up with the OLD iCloud ID - saying I must first sign IN to iCloud and enter a Password Required to turn off the Find My iPad feature.
I have tried using the password I remember as being correct for the OLD iCloud ID. Doesn't work.
I have tried using the password for the CURRENT ID - even though the pop-up has the OLD ID displayed. Doesn't work.
I'm out of ideas - except Reset??
Should I Reset All Settings?I finally found a work-around in another thread on this Using iPad community. Basically, I had to first make sure that the Messages and Facetime were associated with the CURRENT/NEW ID. (I could do this by simply erasing the OLD ID and typing in the new - in General>Messages and General>Facetime. I then used by PC to change my Apple ID back to the OLD ID/EMAIL - but leave the new password alone.
I then went back to Settings>iCloud - clicked on Sign Out. When it asked me to log on -- with the OLD ID/EMAIL -- to turn off the Find My Phone - I did so using the Password that was originally used with the CURRENT/NEW ID. This worked. So I finally was able to close out of the iCloud account that used the OLD ID/EMAIL.
I then went back on my PC to change my Apple ID back to the CURRENT/NEW ID/EMAIL.
I then went back to the iPad Settings>iCloud - and signed on using the CURRENT/NEW ID/EMAIL.
So everything is OK now.
WHEW!!!
Not sure why this has to be so difficult. But thanks everyone for your suggestions. -
I forgot the password to my iPad.
I forgot the password to my iPad. How do I reset it?
If yhou mean passcode:
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New. -
How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?
Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.
Maybe you are looking for
-
Question on mapping measures in 10g
I have a very simple schema I am using to reproduce somethign on my end, three tables. One table has a primary key that joins 1-n to the foreign keys of the other tables. My dimension is from that central table, but both my measures are each from one
-
My display is too big, what do I do?
I reset the PRAM and booted in safe mode, but nothing works. The icons are huge. I can't seem to get the display to reset to the proper screen size. Has anyone had this issue? I was working in Photoshop and was resizing an image display (command +) a
-
Change quarterly quotas to monthly in SAP Pipeline Manager
Hello Is it possible to change quarterly quotas to monthly quotas in the SAP Pipeline Performance Management CRM module without using ABAP code? I have been looking for a solution but I can't find anything. Regards
-
Hi, I would like to initiate a process on the exit of a page (moving to another page). is it possible? and if so, how?
-
How to fix error 3014 on windows?
it wont restore i just get error message "3014" on windows computer