On windows: ok. on linux: failed, why? JBO-30003 and JBO-26061

I changed my password to my database connection in Jdeveloper and compiled my .war file and run in JBOSS under windows 2000 and windows98. It is ok without any problem. That's for testing purpose.
So after that when i put in Jboss running under linux (which is for daily operation) the problems occured:
JBO-30003: The application pool (Request.RequestModule.RequestModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.DMLException:
JBO-26061: Error while opening JDBC connection.
plus one error: unable to logon, wrong username and pasword
anyone know how to solve this?
i've checked out bc4j.xcfg to look for whether i have changed to the correct user name and password and it is all right.
It ran perfectly under windows 2000 and windows 98 and linux but ever since i have change the password, it only run on windows 2000 and windows98. Anyone have solution to that? Your help is very much appreciated. =)

Are you using JDBC thin? What does your connection string look like?
Rob

Similar Messages

JBO-30003 and JBO-25019

We get JBO-30003 and JBO-25019 when calling oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule() with multiple (16) user sessions. I cannot duplicate the problem in my development/test/debug environment. We are using OC4J 9.0.2.0.0 (production version), Oracle9i JDeveloper 9.0.2.829, and Oracle RDBMS 8.1.7.1.1 on Windows 2000. I looked up the JBO error messages, but still cannot see the cause.
Any help would be greatly appreciated. Thank you.
Art T.
([email protected])

Hi,
The exception stack indicates that BC4J had a problem faulting in the value of the PerSystemId attribute of the Person. BC4J was faulting in (from DB) this attribute value during ViewObject passivation. This means that BC4J believed that there was a new ViewRow which referred to this entity. The primary key of this Person entity instance was null so fault-in failed. Of course this is all very strange because it appears as if the PerSystemId is the PK!
I tried to reproduce this in a simple dept testcase in 9.0.3 without success. I did get a similar, not the same, exception stack in BC4J 9.0.2.799 with the following sample code:
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.client.Configuration;
     ApplicationModule am =   Configuration.createRootApplicationModule(
        "mypackage1.Mypackage1Module"
        , "Mypackage1ModuleLocal"
        , null);
     ViewObject vo = am.findViewObject("DeptView");
     Row row = vo.createRow();
     vo.insertRow(row);
     // simulate a passivation -- occurs during managed
     // state ApplicationModule release.
     int id = am.passivateState(null);
     // activate Long postings are being truncated to ~1 kB at this time.

I have an iphone 4 and have tried updating to IOS 6 via my laptop and phone but it keeps failing why is this and what do i do

i have an iphone 4 and have tried updating to IOS6 via my laptop and phone but it keeps failing why is this and what do i do ????

Find the .IPSW file that was downloaded and delete it, then re-download it.
If you're using a PC, shut off your antivirus and firewall software during the process.

Oracle.jbo.JboException: JBO-29000 and JBO-26061

I'm getting the following error when I run my application: JBO-26061: Error while opening JDBC connection.
I can run my application module with the tester but when I run my Web app I get this error. I checked the datasource setting under OC4J preferences and they show the right connections. Pls help. I'm running Jdev 10.1.3.5
Edited by: yvesg2 on Sep 24, 2009 6:55 AM

Humm! just re-installed my app and it has solved the problem

Windows 8 can not connect RemoteApp on W2K12 RDS, but Windows 7 can connect. Why?

Hi!
Windows 8 can not connect RemoteApp (W2K12 RDS), but Windows 7 can connect. Why?
External and internal DNS name is different, the public Cert is mapped to RD Web Access and a RD GateWay Role.
The internal cert (issued by enterprise ca) is mapped to RD Connection Broker roles (SSO and Publishing).
These certifications also be installed on client computers (Personal and Trusted Root Certification Authorities).
The internal CA revocation list is publicated to a website and this web site is accessible from internet. Ports (3389,3391,443) forwarded to RDS server.
On windows 7 everything works fine, but Windows 8 can not connect to Remote Apps. Windows 8 can connect to RDS server via Remote Desktop Connection.
The error:
Thank you for your answers.

Check this thread ->
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c0d7c4a-e422-4a6c-99eb-66df26a1ffc6/rdp8-your-computer-cant-connect-to-the-remote-computer-because-an-error-occurred?forum=winserverTS
and this
http://support.microsoft.com/kb/2903333
HTH,
JB

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

Windows 10 fails on newer dualboot Windows 8.1/Linux, worked on older Windows 7.1/Linux

I did not have any trouble upgrading my windows 7 / linux hp laptop, just my windows 8.1 / linux hp laptop. I have 3 hp laptops, actually 4, one died. I am familiar with dual booting and grub. Thanks for recommending the paper anyway. Will windows 10 run on my dv6 7245us laptop? The upgrade always fails on this system as described in my original post.
Thanks

Has anyone sucessfully upgraded an HP Envy dv6 7200 series laptop to Windows 10 from WIndows 8.1? I have updated all of my HP drivers to the latest versions and Windows 8.1 is fully updated. I have tried installing from the Get Windows 10 icon, the media creation tool, and a Windows 10 x64 iso with no luck. I get through many phases of the upgrade, the system reboots, and then a large circle displays 0% briefly, the system reboots, and then a window displays the following information... We couldn't install Windows 10 We've set your PC back to the way it was before you started installing Windows 10 0X80073B92 - 0x20009 The installation failed in the SAFE_OS phase with an error during PREPARE_ROLLBACK operation The system is dual boot Windows 8.1/Linux. Note that my years older HP laptop upgraded just fine and was also a dualWindows 7/Linux boot system. Please help! Thank you.

Why does Firefox4 for Mac feel less finished than for Windows or even Linux?

On Windows, tabs compress up into the title bar and you can utilize much more screen space for web pages. I wish this had made it into the Mac version. In addition, for mac, it just feels sluggish, laggy, and the browser itself hangs often. My experience with the other platform versions on the same computer is much better. It just feels like the mac version is still beta6.

The Firefox button is only available on Windows and Linux and shows when the Menu bar is hidden.
On Mac the menu bar is maintained by the Mac OS and not by Firefox and the Menu bar is always visible and can't be hidden, so there is no need for such a menu button.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

"Windows Easy Transfer can't transfer your files and settings." Why?

I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
Windows Easy Transfer can't transfer your files and settings.
The message pops up only a few seconds after the transfer begins.
Why is this?! I need those files and windows has screwed me. Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings. Same system language as before. BTW I'm on a Toshiba L505 laptop
running Windows 7 Home Premium.
I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a
few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important
those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use. This new user account has the same unique name of the user account I am trying to restore but that's where
the similarity ends. All the settings for this account are default settings and empty folders. What does this mean?

Hi Vincent, like I said I tried all of that already and it failed. Thanks a lot for trying to help though. Imperfect1, so sorry I took so long to reply. No that's not the case. I was trying to restore from x86 to x86.
Well, I finally gave up. I've scoured the internet for a solution. You'll probably find duplicates of this post all over. This has been a known software problem with Windows Easy Transfer for years and Microsoft has done nothing to fix it or warn users of
the risks. Shameful!
Anyway, I managed to recover my files with this life saver of a program here>
http://www.visser.com.au/blog/migrecover-for-microsofts-windows-easy-transfer/
MigRecover Utility for Microsoft's Windows Easy Transfer.
I can't express how grateful I am to the developer and the host for the download. You guys are the most awesomest people ever. Cheers.
Here's how you modify the syntax in commmand prompt if you used a password to protect the mig file in WET>
http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/68910c1a-3c4b-47af-bb22-0e7ec6f2054f/
Just remember to change the source drive letter in "C:\SaveData.MIG" to the actual drive it's stored on if your MIG file is on an external drive like mine was; whether it's E:, F:, G: or whatever.
Good luck to anyone with the same issue who stumbles upon this post. I hope it helps you as it did me.
AsdyAsks

Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895 Problem installing sccm 2012 client

Hi,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
<![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
context="" type="3" thread="8096" file="msiutil.cpp:300">
<![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I've already checked this forum but nothing helped .
Please provide a valid action plan to resolve this issue.
I'd highly appreciate any help.
Thanks and regards
Arsalan

Hi,
Restart those server might be helpful.
After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Trying to Email Photo Using Iphoto 09: Apple Event Handler Failed, WHY?

Trying to Email Photo Using Iphoto 09: Apple Event Handler Failed, WHY?
This keeps happening. Please help me solve it

This one comes up from time to time and it’s caused by a glitch in the AppleScript underpinnings that work in the background. Frankly, I’ve seen no solution for it and suspect that it would require a re-install of the System Software.
Alternaive:
Instead of making the email in iPhoto, add the photos to the email in Mail. Use the Photo Browser in the New Message Window and you have full access to the Library.
Uploaded with plasq's Skitch!
You can even resize the pics in the New Message Window as you do in iPhoto.
Uploaded with plasq's Skitch!
Regards
TD

Dicovering Intelligent Agent on Linux fails with VD-4565

I try to discover an Intelligent Agent 8.1.5 running on a Linux server with an Oracle 8.1.5 DB from an Oracle Enterprise Management Server 2.1. We just upgraded from OEM 2.0.4 to 2.1 and I had no problem with the Linux agent under 2.0.4.
After starting the Agent on the Linux server the SERVICES.ORA and SNMP_RO.ORA files contain the information about the services running on the server. When I start the Discovery Wizard it fails with the error 'Discovery Failed:VD-4565:The agent of the node is already being deleted'.
Then I stoped the agent and all service on the Linux server and did the following. I removed the SID_LIST entry from the LISTENER.ORA file and used the LOCAL_LISTENER init.ora parameter for the database. I know that the agent needs the SID_LIST to discover the database services, but I just wanted to give it a try. After restarting the database, listener and agent the SERVICE.ORA and SNMP_RO.ORA files did not contain any service information as expected. I tried to discover the agent again from the OEM 2.1 console and everything seemed to work fine. No errors this time. The Linux node was added to Nodes folder in the Navigator tree, but for sure no database or listener.
Therefore I put the SID_LIST back into the listener.ora file and restarted the listener and agent. The service information were included in SERVICES.ORA and SNMP_RO.ORA file again. So I tried a Refresh Node from the OEM console and the error VD-4565 showed up again.
Does anyone have any idea what's going on an how I can manage a Linux database from an OEM 2.1 console?
Any help is appreciated.
Thanks
Peter
null

Hello Peter,
I, alas do not have the answer for you. But... your symptom is EXACTLY LIKE MINE!!I was running OEM 2.0.4 and Oracle on a linux box (unfortunately, today I did something wrong and blew the database away!!!, I do not want to tell you how many hours I spend getting the database up, connected and communitcating with Windows NT box running OEM!) I made the switch from 2.0.4 to 2.1, and everything quit. More or less. I fixed my tnsnames.ora file on the NT side. That allowed me to connect. I got the Agent (sortof) running on the linux box and then I could discover the linux host computer name and domain, but it would not find ANY database. Although I could connect from the linux box, the nt box using oem (direct to db), sqlplus, and Access odbc!!! All listeners were there, etc. I did check the snmp*.ora files, and they would not discover anything (linux side) even though the LISTENER was listening, and tnsnames were naming and instances were instancing. My guess is yet another bug.
Sorry for long reply. Now I will RELOAD THE ENTIRE DATABASE AND APP AGAIN!! I so far have been totally unable to run on the liux side, net assist and net easy config, but I could sucessfully bypass those apps by correctly using and configuring initSID.ora, etc and the other *.ora files.
Eric
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Peter C:
I try to discover an Intelligent Agent 8.1.5 running on a Linux server with an Oracle 8.1.5 DB from an Oracle Enterprise Management Server 2.1. We just upgraded from OEM 2.0.4 to 2.1 and I had no problem with the Linux agent under 2.0.4.
After starting the Agent on the Linux server the SERVICES.ORA and SNMP_RO.ORA files contain the information about the services running on the server. When I start the Discovery Wizard it fails with the error 'Discovery Failed:VD-4565:The agent of the node is already being deleted'.
Then I stoped the agent and all service on the Linux server and did the following. I removed the SID_LIST entry from the LISTENER.ORA file and used the LOCAL_LISTENER init.ora parameter for the database. I know that the agent needs the SID_LIST to discover the database services, but I just wanted to give it a try. After restarting the database, listener and agent the SERVICE.ORA and SNMP_RO.ORA files did not contain any service information as expected. I tried to discover the agent again from the OEM 2.1 console and everything seemed to work fine. No errors this time. The Linux node was added to Nodes folder in the Navigator tree, but for sure no database or listener.
Therefore I put the SID_LIST back into the listener.ora file and restarted the listener and agent. The service information were included in SERVICES.ORA and SNMP_RO.ORA file again. So I tried a Refresh Node from the OEM console and the error VD-4565 showed up again.
Does anyone have any idea what's going on an how I can manage a Linux database from an OEM 2.1 console?
Any help is appreciated.
Thanks
Peter<HR></BLOCKQUOTE>
null

How to upload file from one machine (windows) to another (linux)through cre

How to upload a file from windows platform to linux platform.
on both platforms sun app server is running.
from creator is there any methode to open ftp port and upload

http://www.google.com/search?q=jdbc+blob
Blob processing varies between databases; see also examples for whatever database you are using, e.g.
http://www.google.com/search?q=jdbc+blob+oracle
If you are storing text data instead of binary data, replace "blob" by "clob" in the searches.

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

On windows: ok. on linux: failed, why? JBO-30003 and JBO-26061

Similar Messages

Maybe you are looking for