One customer-two codes--urgent

Hi all
Today i came to know these two Tx codes as suggested by Ajinkya P
(1)Customer Master - Flag for Deletion - Sales Area: VD06
(2)Customer List - Block: VD05
I have created a new code for an already existing customer by mistake.The new customer code do not have any transaction as of now so should i mark the deletion flag against sales area of that customer using Tx Code VD06 or should i block that newly created customer using Tx Code VD05.
PLEASE ADVISE WHICH ONE IS A BETTER OPTION & WHY?
regards & thanks in advance
vikas chhabra

Hi Vikas.,
when you flag customer for deletion you get a simple warning message,If you enter youi can carry on with your work,If you want to block t he cuystomer Take the help of your technical people where they can help you to convert warning messages to error messages
REWARD if helpfull
Thanks & Regards
Narayana
Message was edited by:
manam narayana

Similar Messages

One Customer two Sales area

Dear Gurus,
my client is uploading file through BDC to create sales order.
In that Zprogram one sales area hard coded but some of the customer have two sales areas
including the hard coded one also means two customer records.
now customer who is having 2 sales areas are not creating the sales order
how can i rectify this to get the sales order for the two sales area customer
regards,
satya

Dear satya ,
The solution is as mentioned by Ramki and Anupa.
If there are 2 sales areas for a customer, system will not by default chose the sales area, but asks the user to select it.
Since its BDC, that selection option will be most probably bypassed and since there is no input, program will exit.
Hence you may mention the sales area also in the input file.
Thanks & Regards,
Hegal K Charles

One customer / vendor used to share by two company codes

Hi experts,
is there any possibility to share same vendor or customer in two different company codes?
my client have two company codes 8000 and 9000 and that two company codes sharing the same customer /vendor XXXXX.
now they want to post the two company codes transactions to one customer/vendor.
means when we open the customer /vendor line items we should able to see two comapny codes transactions of that customer/vendor.
plz advice.
Thnaq,
sandhya.

yes it is the same way the SAP suggests- provided address is same.
SAP vendor / customer has got two segments -
General data - which is common for all company codes and is at client level data and stored in table KNA1 (customer) and LFA1 (vendor)
Co code data- which is specific to company code - create as many views for each co code which are specific to co code decisions and accounting - and is stored in KNB1 (customer) & LFB1 (Vendor)
In the same way Sales organisation and Purchase Organisation also stored separately.
For creating Co code data, enter existing customer/vendor code and type co code and it will allow u to create both data.
Hope this is of help to u

Can i assign one customer to more than one company code how?

can i assign one customer to more than one company code how?

Hi
First Create the Customer Centrally in XD01 and then extend the same Customer in FD01 for the required company codes.
Regards
Venkat

Collection strategy: one customer in multiple company codes

Hi,
we look into CM at the moment and have the following requirement:
There is one customer who has business with different companies (company codes).
the collection for these kind of customer should be based on the customer across all companies and not within each.
If customer ZZZ is in company code 1000, 2000 and 3000 and it would be necessary to have only one collection specialist on this customer across all companies.
How would you do this?
Thanks + Regards
Hein

Hi,
You can create a new collection segment containing all the required company codes and assign that segment to the customer profile to be used for this customer. This would enable you to assign the same specialist and same collection strategy. In your process receivables you will get the consolidated data for this customer. However when you process it, you will get individual detailed receivable due for individual company codes.
Regards,
Ravi

Regarding Two Account Receivable for One customer

Hi all,
Can I set up two A/R receivable for one customer .For example :
Equipment sales - A/R----
Part sales -
A/R
However,A/R receivable can be set only at business partner level.
Is there any work around .Please suggest me
bishal

HI,
Suda is correct, that it is not possible.
Even if it's possible that a system can split a Sales transaction to multiple receivable accounts, how upon payment? With an accumulated-multiple receivable on one customer's account, the customer will not tell us that this much go to this A/R account and this much go to another A/R Account.
In order to address the multiple A/R requirement of your accountant, try to study the following options
OPTION #1
I would suggest that you create multiple Customer Records in order to provide the multiple A/R Account .
Implement a coding standard on the Customers with multiple A/R Accounts, such as
C10023 - Customer with A/R Equipment
C20023 - Customer with A/R Parts
Since there will be issue on Payment for this option, create a UDF in the Incoming Payment module and assign an FMS with a query displaying the amount due for A/R Equipment and A/R Parts so that payment can be manually splitted between Customer Accounts.
OPTION #2
Maintain the standard of SAP Business One, and focus on the reporting part of the Balance Sheet. You can create your own Balance Sheet report in order to futher split the A/R into 2 or several A/Rs depending on the transactions posted to A/R Invoices.
Hope this help.
Laurence Resubal
Edited by: Laurence Resubal on Jun 19, 2008 10:46 AM

HT3678 quicktime pro doesn't accept my registration code. I have paid for two codes and neither one works.

quicktime pro doesn't accept my registration code. I have paid for two codes and neither one works.

Ensure that you're following these steps.

What is the T Code to transfer an invoice from one customer to another ?

What is the T Code to transfer an invoice from one customer to another ?
Thanks.
Points will be awarded.

Hi Kathy,
You cannot transfer the invoices between customers. You need to reverse customer A invoice and then post that invoice to customer B.
Regards
Jyotsna

Mainatining two LST in differnt chanel for one customer please help

dear gurus
i ve the following problem
i ve one customer maruti in two distribution channel with customer no4005 for both
can i maintain two diferent LST fro both
like i need to maintain 12.5% for one distribution channel and 4%for other
but sytems taking identical for both of it
so wat ll be the solution to maintain two diffent LST
in customer master
please help
subrat

in this way its not happening suggested by u saurav but i think the NP has given a good suggession
actually i dont want to have same customer no in both the distribution channel so it ll better to do it in this way
thanks
both of u...
Message was edited by:
subrat panda

Encore is giving me two codes and I have a project due! Help!

Hello!
OK, here is a little back ground to my problem:
I started to burn a project for a client the other day and ran into some problems. I burned 50 Verbatim discs and only 3 worked. I thought that it was a faulty DVD spindle, so I bought another 50 pack and the first one off the top didn't work.
My next thought was the burner. I was using a external HP burner that was about 3 years old. I borrowed a friends external burner that he had just gotten(never burnt a DVD before and only 3 CDs). When I tried his burner, I was able to burn 4 copies sucesfully. So, I returned his burner and ordered a Asus burner.
When I plugged the new Asus burner in, it installed fine and Encore was able to recognize it. When I burnt the first DVD, I used a Memorex RW to test it out. It worked great! So then I proceded to use my Verbatim -R discs. However, the first one that I tried, it gave me a error message of 40801. I tried 5 Verbatim discs and it would keep giving me either the 40801 code or a new code of 23A02. My next thought was maybe the USB port went bad, so I tried a new USB port. The first Memorex RW I tried burnt correctly, but then the next Memorex RW came up with a code. I then tried a Memorex -R and a Verbatim -R but still, it gives me one of the two codes.
I don't know what is going on. Why will Encore burn a DVD one second and then give me a error code on the next?
I am at my ropes end, and am hoping that someone here can give me some help.
Here is some stats of what I am using:
Adobe Production Premuim Suite CS5.5
Asus Burner
Windows 7
I would like to add, since I understand that Adobe looks at these posts, that I have tried to contact customer support and never got anyone. I was on hold for a total of 4 hours. I am not trying to make a big problem about it, but I do think that that isn't very good customer service.
Any help would be much appreciated!
Thanks!!
Jared
Message was edited by: JaredM94

Did you use the link I posted?
The main Imgburn page can be confusing, and people have reported that some of the 'advertising support' links are not really very friendly
I use Imgburn for ALL of my burning needs... ISO created by Encore, and general file/folder burning for backups
I have never had a problem with Imgburn... and many other people in this forum also use it with zero problems
If you don't want to use Imgburn, create a DVD folder on your hard drive instead of an ISO and use (I think it has one, but not really sure) the Windows burning process
To find out just what Windows has, search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

Program associated with Custom transaction code.

Hi Guys,
I was studying two custom transaction code made in my company's SAP System.
Program associated with one custom transaction was starting with name SAPZMxxx and program associated with other custom transcation code was starting with Z.
Can anyone tell me whhat is the difference or in other words what is the significance of starting with SAPZM....
Tushar.

You can exactly know the kind of program only seeing the program attribute.
Infact if the program name begin with SAPMZ, you're sure it's a module pool custom, but if it begin with Z* you can't be sure it's a report.
SAPM is a convention, if you're creating a program called SAPMZ... the system know you want to create a module pool.
But if you're creating a program called Z... the system can know which kind of program you want to create only after you've indicated the type in the attributes.
Here you can choose whichever type of program, a module pool too.
So the name of module pool can begin with SAPMZ or Z.
Max
Message was edited by: max bianchi

Satellite P500 PSPG8E - Bios peeps 3 time - one long two short

Hello,
I have a question: when I power on my Satelite P500 PSPG8E I get 3 Peeps: One long two short!
What is this, maybe Memory?
Thanks allot
Greetings from Germany
Michael Burkhardt

Hi Michael,
I dont know what this beep code means exactly but as you wrote, it could be a RAM issue.
Do you have two modules installed? If yes you should try to start your notebook with one module only and test each module in each slot to determine if its RAM, RAM socket or something else.
But if your notebook is under warranty the repair would be for free if you contact an ASP in your country. ;)

Fbl5n: The printer provides me only one customer items for each page...

Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
Thanks

Hi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind...

How do I print more than one custom-size photo on a page in PSE 10?

I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10. I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper. The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10. I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

In Editor:
File>Print>#4 Select type of print>picture package

How to use the same credit card for more than one customer master

Hi,
this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
The customer does not like the idea of using alternative payer.
Did you ever face the same problem and how did you solve it?
Much Thanks in advance
Best regards
Clemens

thanks

One customer-two codes--urgent

Similar Messages

Maybe you are looking for