One little question about searching partial text in object name

Hello Everyone,
I have searched a bit but couldn't find an answer about this.
I am a Freehand user and i am currently using navigation names for differents items. Works perfectly good.
But now i need to search part of the items name.
For example i have the objects named in the nabigation panel as:
- "ItemA-rotation" for the first group of items
- "ItemB-static" for the second group of items
as for now i can search for all the items A by typing in the search graphic panel "ItemA-rotation" but i would like to find both item A and B by typing a unique search request.
Is it possible to write something like: "*Item*" to search every items that contains the part "Item" in the full name ?
Thank you for your future answers.
Cheers.
PS: i am using Mac os X with Freehand MX.

It appears it isn't possible. I set up a similar document with spaces added between the word "index" and the letters "A" or "B". My thinking was that the connected wording of your phrase "ItemA-rotation" was limiting the search. But searching for the word "index" didn't reveal all the items; it had to be typed exactly as the name was set up in the Navigation Panel. Perhaps I'm missing some unknown control characters but I have never seen what those could be.

Similar Messages

AutoSPInstaller - Question about Search Topology

Hello,
I would deploy a new sharepoint infrastructure with autospinstaller and i have some questions about search topology.
This infrastructure will host at end 2 EDM (10-20TO) and probably some user sites.
I will provision 2 WFE and 2 APPS.
Search Topology (4 servers) =>
- Crawl Component :
SRVA & SRVB
- Query Component :
SRVC & SRVD
- Search Query and Site Settings Service :
SRVA & SRVB
- Admin Component :
SRVA & SRVB
- Index Component :
SRVC & SRVD
- Content Processing Component :
SRVA & SRVB
- Analytics Porcessing Component :
SRVA & SRVB
I read many articles about this subject but all were different !
Anyone can apply my choice or make me a proposition ?

Hi,
I just want confirme that the infrastructure is correct before deploy it. Do i really need to isolate admin component, for now i put it on only one app server.
For "Distributed caching", i planned to install it on both WFE servers.
Thank you for your help.
Jeremy

How to find the text id & object name to be used with read_text ?

Hi All
how to determine the text id & object name associated with PO to be used with FM read_text ?
Regards
Jaman

Hi,
For PO there will be Header Texts and Item texts.
For header texts just Take the PO number as TDNAME.
for Item texts Conactenate the PO number and Item Number and use as TDNAME.
in ME23N Go to any text.Double click on it
It will take you to text editor.
GOTO-> header
it will display the TEXT ID,TEXTNAME,LANG and TEXT OBJECT etc
Similarly for every text you will find and use;
Regards,
Anji

Question about searching

Hi all,
I'm considering Oracle BDBJE for a project that stores visited url's (data) based on a key of ip-address (4 bytes) combined with a date (long) to make the keys unique.
If want to search on date (ignore ip) do I have to make a secondary database that has the date of the visited url's as primary index?
Does a method like Cursor.getSearchKeyRange, if supplied with partial key, always search a the beginning of the key? Or could I use it to search for a date by only supplying the date-part of the key? Prop. in this case the bytes for the date will be mistaken for the bytes of the ip-address that comes first in the key.
Thanks for any help.
regards,
Jeroen

Hi Jeroen,
I'm not sure I have all of your data model yet, but I think you've given us enough for me to say you should likely try one or possibly two secondary databases.
If you have not already done so you should review the documentation on Secondary Indexes as found here:
http://www.oracle.com/technology/documentation/berkeley-db/je/GettingStartedGuide/indexes.html
Inserting/Modifying records is faster without using a secondary index. But the queries that you have identified would perform better with secondary indexes. But you should experiment with a few different approaches and compare that with your performance goals.
Also, if you have not already thought about this, I would consider using DPL to implement this, especially since you will be evaluating alternative database designs. You will find that the implementation time is faster and you can also make changes quickly.
http://www.oracle.com/technology/documentation/berkeley-db/je/PersistenceAPI/BerkeleyDB-JE-Persistence-GSG.pdf
You know your data best, but based on the info you provided here are my thoughts/alternatives:
Primary Database key = IP/Date or Maybe Date/IP is better if the Secondary for IP address exists
data = URL plus other data not sure what
Secondary Database Key = URL (I left out date because you said it is not likely that the same URL will exist for multiple dates).
Possible Secondary Database Key = IP address (Which URL's were visited by IP X).
Again, I think you may want to try out something like this a model your inserts and also your query performance. Feel free to post further questions about any results you are getting as you move forward.
Also, if you have not already seen this I would keep this URL handy and consult with it before you post:
http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html
I hope this helps!
Ron

One last question about Apple IDs

I thought id asked the lot but there is one last question. How does one delete an Apple ID?
Many thanks again
Anthony

Hello Again Anthony!
"How does one delete an Apple ID?"
You can't.
After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
ali b

A question about search help and input help,PLZ take a look at it.

hi everyone,
i want to know the difference between search hlep and inpu help
can anyone tell me about that?
thanks

HI
BOTH ARE SAME
you can define F4 help in 2 ways
in SE11 or in the report program
IN SE11
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
in REPORT PROGRAM
in this way we declare in report program
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check this out
http://www.sap-img.com/abap/value-request-for-parameter.htm
******************************8
sample program
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
one more program....
REPORT ZHELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Create it from SE11.
enter search help
and create elementary
enter description and below Table name
and the fields
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

One more question about upgrading HD

EVeryone was really helpful last time, I have one final question:
Does the name matter for the HD?
I have bought my HD, used SuperDuper and am actually already working off the new HD via Firewire.
Does it matter what I NAME the new Drive? When I used Super Duper I called it "New Startup". The current HD is called "Macintosh HD". Is this a problem?
Thanks guys!

@Niel: How about localized chars (ä, ß, î, etc.) and such ones that may have a special technical meaning (like /, *, -) ?

One more question about "snap to" points in audio objects

sorry, one more question people.............. is there a way to set a "snap to" point in an audio region? Can I have logic set a point, or an "anchor" within an audio region that would coincide with the cursor. Once I get the cursor to a bar or a beat, is there a command that would allow a "snap to" point to be created in an audio object? That way I could clean up any "noise" or "chatter" at the beginning of an audio bounce or any audio object, and still have no problem pasting it all over my arrangement. I'm sure it's in here somewhere, but can't find it in the manual..
thanks again!!!

The anchor point in an audio region can be moved to wherever you want it to be. Let's say you recorded a loud piano bass note and afterwards you trimmed the file so that the attack of this sound happens right at the beginning of the audio region. Your anchor point will now coincide with the begnning of that region. This means that you can place that audio at, say, bar 37 and it's guaranteed that the attack of that sound will play exactly at bar 37. In this case anchor point = position of audio region in the Arrange Window.
Even though you haven't played a MIDI note into the song in order to place this audio region, an "event" is generated for this sound which can be viewed in a special version of the Event Editor which shows the position of all audio regions in the arrangement. Access this by simply clicking on a blank area of the Arrange window and then opening the Event Editor.
So let's say this sound is positioned at bar 37. Open the Event Editor (as described above) and you'll see an event at 37 1 1 1 and the name of that audio region to its right. In this case, the event's position = the start of the sound file = the position of the anchor within that sound file. If you changed the position of that event to 38, or 109, or 3, that audio region will be "triggered" at any of those positions. That sound will always "attack" on a downbeat.
Now let's say you reversed that pinao note in order to create a dramatic swell into a section of your song. (Open the sample editor and use the Reverse function). At this point, the anchor point is still positioned at the beginning of the file! Play back the sequence (from our bar 37) and the audio will play back from bar 37, only backwards this time; the peak of that piano note will be at some point later than 37.
So let's say you wanted to position this sound so that it hits exactly on the downbeat of bar 37. How do you do it? Well, you could always slide the audio file in the Arrange Window and try to line up the attack of the audio waveform with the downbeat of bar 37, but there's an easier way...
Open the sample editor and move the anchor point to the end of the file, coinciding with the peak of the waveform (the piano's attack is now at the end because we reversed the audio). Next, close the sample editor window, click on a blank area in the Arrange Window and open the Event Editor. You'll see that this audio region is still positioned at bar 37, but the actual beginning of the sound file now starts before bar 37. Now when you play back, Logic will start playing that sound file before bar 37, but the audio's peak will be lined up at bar 37.

A question about search level

In the parameter :"DEADLOCK_DETECTION".
It's explain include a substantive it's named :"search depth".
I can't find the explain about "search depth". Please help me.
thanks

Hi,
the search depth specifies how far the deadlock detection should search for the reason of the deadlock. A higher value would search deeper for the reason, but would also increase the time needed to search (and find).
We normally recommend <b>against</b> changing the default value of this parameter. Normally also share locks are used, where we can't really specify all tasks that hold sharelocks (as opposed to deadlocks consisting only of tasks holding only exclusive locks), but only the number of tasks in total. If the deadlock isn't found, the Request_Timeout comes into effect.
Does that help you understand this parameter?

Two little questions about ROWID

Hello friends at www.oracle.com ,
as we know, each time we insert a new line, Oracle creates an unique ROWID for that line. I have 2 questions about ROWID:
1. Is there a way for me to obtain ROWID value at the moment of insertion, other than doing a SELECT rowid FROM (table) WHERE (primary key inserted values) to obtain the ROWID that was generated for that line?
2. If, for any reason, we have a so big database that all ROWID possible combinations are over, how would Oracle handle such situation? I believe it's something quite rare to happen but, anyway, there's the possibility as Murphy Laws have taught us :)
Thanks for all answers, and best regards,
Franklin Gongalves Jr.

1. The (quite new) DML RETURNING clause allwos this:
Eg. insert into bonus values ('Bill', 'work',100, 4) returning rowid into :x
This works in 8.1.7 and 9.0.1 I don't know about earlier.
2. A rowid includes the physical address of the data. Before you used all the rowid's, the database wouldn't be able to hold any more data. The limit is big, but not infinite. If you hit it, try going to distributed databases using database links.

Searching in text by contact name

Before iOS6, I could search by contact name within the text messages area and it would sift through my long list of text messages to bring up the contact name that I had texted with. Now it appears that Apple is not allowing the contact name to be included in the search criteria, because when I type in someone's name to search for the last thread of texts with them, if there first name is not in one of the text messages, it brings NOTHING up. Apple please fix this like it was before. Allow the full name of the person (contact in your address book) to be automatically among the search criteria when you search through text messages.
Thanks,
DN

It seems you have not synced the contacts to OVI Suite.. Connect the phone to PC.. Open OVI Suite..Sync-->Sync Now-->Contacts..
Check the Messages after the sync is over..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

A question about creating packages as local objects in ABAP

Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
Dariyoosh

Thomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh

One last question about capturing from tape

I have a box full of family VHS tapes that I will be capturing into the computer to digitally archive. However, I want to make sure I am doing it the best possible way. These are the two things most important to me:
1. Quality
2. Longevity
1. Quality
I have a VHS/MiniDV JVC SR-VS30 deck connected via firewire into my 2014 iMac. I know that firewire is typically the best option when capturing DV footage into the computer. However, is this still true for VHS and other forms of old tape. I can hook anything up to this deck via composite/s-video in and go out through the firewire connection. However, I wasn't sure if firewire was the best coming from a VHS tape. I also have an old video capture card that has a straight s-video/composite input. Which would be more native to the VHS/analog tapes as far as keeping original quality and the best possible image?
When I use the JVC deck, some programs will capture the vhs tapes and others won't because they won't recognize unless I'm using the DV side. For example, FCPX recognizes the deck, but when I go to import unless it's a dv, it will say "no tape" and I cannot capture anything. iMovie will capture files as .DV. Quicktime will also recognize the deck and capture files as apple prores MOV files. When I compare the QT and iMovie, the QT files look better in my opinion, though I don't know if they truly are. The iMovie dv files have jagged edges like tv lines or something during quick movement and like others say about firewire it looks a little "milky" (though I know this isn't necessarily a bad thing). The QT clips don't necessarily look sharper, but they don't have the hideous jagged edges.
So my question before I start this large project is:
Which capture methods above would you use, or what else would you recommend for best quality?
2. Longevity
Which file format would you recommend saving these files (or just keeping them as they are at capture) for long term storage? When I come back to these files in 10 years and need to convert them to something new, I want them to have the greatest chance of being compatible with whatever lies ahead. There are so many different file formats.
Many thanks for any help along this long process

I want to make sure I am doing it the best possible way.
I have done lots of that.
For maximum quality here is my procedure: ADVC300 > iMovie 06 > iDVD 09/11.
To get your VHS video into iMovie, use the Grassvalley ADVC300 . With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The ADVC300 has been discontinued by the manufacturer. The included software (which is not really necessary but does enhance performance) is not compatible with OS 10.7 or newer. You can still find the ADVC300 for sale in a few outlets as well as eBay. It will sell between 50% and 100% ABOVE its retail price. Yes, it's that good.
If you can’t find the ADVC300, use the Grassvalley ADVC110.
I have a drawer full of analog-to-digital converters. After using the Grass Valley ADVC300 I find nothing else acceptable.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09, 11, and 13 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video. (Also the latest iMovie CANNOT set Chapeters !)
After lots of experimenting I get the best results using OS 10.6, iMovie 06, and iDVD 09/11. My movies look just like Hollywood!
My primary computer is a Mac Pro, so I just use one of the four hard drives and boot OS 10.6. You can also partition a single hard drive to achieve the same results.
This may seem like more trouble than you want to go through. However, I find the superior quality to be well worth it.

One last question about upgrading my old computer

I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ?
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ?
** Thank You in advance for any info you may be able to give **
This question was solved.
View Solution.

JohnBolo wrote:
I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ? The PCI Express slots are backward compatible. Therefore, the PCI Express 2.0 will work in PCI Express 1.0 slot. Here are the System Requirements for the game. The recommended video card is a HD 4870 or larger.
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ? Once the dedicated video card is installed the Integrated Video is disabled. Therefore, they are independent of one another. The major conecern when buying a dedicated video card is, the wattage required for it to operate properly. I believe that the power supply unit (PSU) in your computer may be 250W to 300W. You can check the lable on the PSU to find the wattage. It will be difficult to find a video card that will operate with that wattage.
** Thank You in advance for any info you may be able to give **
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Nokia E6 White question and one little question

Hi,
I am planning on buying the Nokia E6 in white, but I am really worried about the fact whether the keypad or the cover of the memory card and USB slot will get dirty. (yellowish)
And my second question: The Nokia E6 is provided with a leather case in some countries, but I am about to buy one E6 and I think it's not provided here in the Netherlands. I wanted to know if anyone knows the exact model number of the leather case provided in the box, so I can buy it separately.
Thanks!

Hi, I have bought the white E6 from the Netherlands, and you're right - there is no case (and no memory card).
The USB slot shouldn't get too dirty that easily since it is not white, but silver (same as the back cover).
Haven't had the handset long enough to know if the keys get dirty. The finish on the keys is a matt white (not glossy/shiny).
One downside of the white (and possibly silver) is that when you set the backlighting on the phone to a low level (to save more power), it is quite difficult to the the keys. I have had to set the backlight to at least medium so that the light is bright enough against the white keypad.
I must the colours offered are rather boring (white/silver/black) but presumably it is because it is sold as a business phone.

One little question about searching partial text in object name

Similar Messages

Maybe you are looking for