One music track running through all pages on iWeb

Any tips on how to have one music track playing all the way through a site?
Obviously I can get a track running constantly on one page and starting automatically on opening, but struggling to know how to get the same effect across the whole site.
Thanks!

Welcome to the Apple Discussions. You can do it with an HTML snippet and IFrame code like I did in this test site: Helper Site. The darker area is the page with the music and the HTML snippet which embeds the other pages into the first page.
OT

Similar Messages

  • I have a set of photoshop presets, I used to be able to press play and it would automatically run through all the steps now it asks me to ok every single step. What happened ?

    I used to be able to press play on the preset and it would run through all the steps automatically. Now it stops at each step and wants me to adjust and ok everything ... I used the presets because I didn't have to do that. Why did it change ?

    Where did you get the presets?

  • How to add more than one music track in iphoto slideshow

    how do i add a second music track to a slideshow in iphoto. When I have a slide show longer than one song I'd like to start a second music track rather than repeat the song. Thanks for any help...

    I shortened songs in the playlist by changing the end time but when I select for slideshow in iphoto, it plays the full length????
    I know that feature works with later versions of iPhoto but don't remember it it did with iPhoto 8 and 10.5.8.

  • Make multiple clips from one music track

    How do I trim my music track so that I can edit out parts in the middle--not just the ends?

    do the following:
    1. create the two different instrument tracks, let's say instr1 and instr2
    2. got to the environment window and search these two tracks and drag them a bit aside
    3. choose New/Transformer
    4. drag the Transformer object in the neighberhood of the two instrument tracks
    5. cable the output of instr1 to the input of the transformer object
    6. cable the output of the transformer object to the input of the instr2 track
    7. go back to the arrange window
    8. select instr1 and enjoy!

  • [JS IDCS5] Running through all tables and place textFrame

    I wan't to place textFrames below all the tables within a document.
    #target indesign;
    var myDocument = app.activeDocument;
    var myTables = myDocument.stories.everyItem().tables;
    for(var i=myTables.length-1; i>=0; i--){
               // var myFrame = myTables[i].insertionPoints[0].textFrames.add();
               // the above line does not work......
    How do I get the insertionPoints of the tables, so textFrames can be added at that point?
    Regards, Sjoerd

    Tables have a property storyOffset, which is an insertion point. myTable.storyOffset is the insertion point immediately before the table. The ip after the table you can get your hands on like this:
    myTable.storyOffset.parentStory.insertionPoints[myTable.storyOffset.in dex+1];
    Now I get the following error:
    JavaScript Error!
    Error Number: 55
    Error String: Object does not support the property er method 'storyOffset'
    Engine: main
    Source: myTables.storyOffset.parentStory.insertionPoints[0].textFrames.add();
    What is wrong?

  • 2 moc packages conflicting and pidgin music tracker not working

    Hi all, yesterday i installed moc from aur
    extra/moc 2.4.4-2 [installed]
    An ncurses console audio player with support for the mp3, ogg, and wave
    formats
    i tried setting up pidgin-music-tracker plugin to use moc, but it keeps staying in "Stopped" status
    when launching moc, i was using mocp, so i tried running moc instead and nothing happens, shell freezes
    this is what i've discovered
    smau [~] $ moc -v
    Qt Meta Object Compiler version 62 (Qt 4.6.3)
    if i run man moc, it shows me the man for the music player
    smau [~] $ mocp -V
    moc 2.4.4 Build: May 20 2010 21:00:0
    is this possible? what am i supposed to do about this conflicting and have pidgin music tracker working
    thanks all!

    extra/moc 2.4.4-2 [installed] tells you the package is coming from extra, not from AUR. Were you using yaourt?
    You can search for the correct name of the version of moc on AUR there:
    http://aur.archlinux.org/packages.php?O … arch=Aller
    But the one from extra should be fine.
    If you want to know the name of the binary (which is not the same as the name of the package)
    As you pointed it, the name of the binary for the package moc is mocp. Use this command for calling it from third party software.
    In general, if you wish to know the name of the binaries installed , run " pacman -Ql moc |grep bin "
    Last edited by farvardin (2010-06-09 19:10:27)

  • Music track details listed in non-Latin characters (might be Kanji)

    I copied over 44 music tracks which were all ripped at the same time from a CD; numbers 10 to 44 are fine; numbers 1 to 9 are not listed correctly in the Touchpad music player, it looks to me like the details have been tranlated to Kanji font. They are fine in Windows Media Player; the filenames are fine so I presume there is something wrong with the tags, but I can't see what is different about those nine tracks. I've made a copy of them removing properties and personal information and I can then use those versions in a playlist. I have had a similar problem with other tracks, but never before with so many from the same source. Any idea's what I need to do to fix this please? 
    Post relates to: HP TouchPad (WiFi)

    hi Ley!
    Fraid still getting getting any playback BUT I can also play my itunes music through QT7 but not Windows Media Player which I thought I would be able to as all mt itunes music files now have the Windows Media logo!
    goodness gracious ... StarDeb may be fascinated to see
    b that.
    I can't recall seeing that being reported before.
    okay, let's try switching your file type associations back. here's a screenshot of what my itunes associated music files look like:
    http://www.pixentral.com/show.php?pic=1ABRherp57ElHuKwHWMjLbhAXRBJM1
    (protected AAC have a different extension.)
    and here are my file type associations in my "tools > folder options"
    http://www.pixentral.com/show.php?pic=10Frbi3ChvV9hos93rC4glsnhaiI1
    can you change your file type associations so that those files are opening with itunes again? if so, will they
    b play
    properly in itunes?
    love, b

  • TS3274 music won't play, play button on music not running

    music won't play, play button on music not running, closed all programs and restatred twice, still won't play

    Here is the list of supported codac formats supported by Android and like I thought, WMA isnt listed as a supported format unless a 3rd party app was installed that WMA worked with but the native OS does not have support for the file you are tring to play...
    Check out formats at http://developer.android.com/guide/appendix/media-formats.html
    Update:  Looks like I missed something because I found a post that reports they will work but Android site says they wont so I guess its one of those situations if they work that fine but if they dont, dont be suprised.  All I can say is it would be simple enough to convert the files to MP3 and remove this restriction.
    http://androidcommunity.com/forums/f41/wma-format-3359/

  • Running through songs....can anyone out there help?

    So, I have tried to reset, install the latest software, etc...here is the problem, as yet, unresolved...when I choose a song via albums or artists, it just runs through all of the songs and plays none of them. Has anyone heard of this before? THANKS in advance for any help and for taking the time to answer...ds

    THANKS for the reply! It happens when I go to albums or artists, and choose a song to play...it just scrolls through the remaining songs and does not play them, or if I choose the last song on the list, just goes back to the main menu. If I play from the All Songs list or the purchaed music playlist it works fine...very weird...I was thinking of just restoring the whole iPod and reloading it with software, etc, I just do not know how to do that...thanks for your time!
    -ds

  • HT5848 My iTunes Radio player just runs through the songs without stopping

    Ever since the newest IOS update, every time I pick a station on the iTunes Radio or use one of my own, the player will just run through all the songs it is going to play and will not stop.

    I just had the same exact problem. It's like the Nano was forwarding thru the songs by itself..nothing would play!
    So I went and looked at the manual, which suggested I try resetting it first. I did, and it worked! Here's what I did:
    The manual instructed me to turn the "hold" switch on & off. Then it said to hold down the Menu and center button at the same time, until the Apple logo appeared. Then in a few moments the main screen came back on...and I was able to play songs again.
    Hope this works for you, good luck!
    Dell 2400   Windows XP  

  • Open all pages in a PDF and save them as sequential files

    I'm trying to make a script that will open all pages in a multi-page PDF and save them as sequential files, but I have had no luck with the simple script in the "Adobe Ilustrator CS5 Reference: JavaScript".
    there example to open a PDF to a designated page does not work for me in Illustrator CS 5.
    // Opens a PDF file with specified options
    var pdfOptions = app.preferences.PDFFileOptions;
    pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
    pdfOptions.pageToOpen = 2;
    // Open a file using these preferences
    var fileRef = filePath;
    if (fileRef != null) {
    var docRef = open(fileRef, DocumentColorSpace.RGB);
    if anyone can get me on the right path it would be appreciated.

    Hi DuanesSFK,
    you can open a PDF page on this way (tested with CS3 and 5):
    //OpenPDFpage2.jsx
    var uILevel = userInteractionLevel; 
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
    // Opens a PDF file with specified options
    var pdfOptions = app.preferences.PDFFileOptions;
    pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
    pdfOptions.pageToOpen = 2;
    // Open a file using these preferences
    //var fileRef = filePath;
    var fileRef = File("~/Desktop/YourOwn.pdf");
    if (fileRef != null) {
    var docRef = open(fileRef, DocumentColorSpace.RGB);
    app.userInteractionLevel = uILevel;
    To open all pages you have to loop through all pages etc.
    Easier for you:
    Search here in forum for the "open pdf" script  (I don't know the exactly name, it was written by CarlosCanto, ) This should always work for you.
    Have fun

  • How do I add a tracking code to my page?

    I want to add a tracking code to my page but iWeb doesn't seem to allow it. I copied the html code from a 3rd party site (Google Analytic) and tried pasting into the html widget in iWeb but when I check the tracking report it keeps telling me the code has not been installed. I have tried placing the text block at various places on the page and still no luck. The directions at Google Analytic tell me where I need to paste it into the html code but to do that I need an html editor or a text editor that can read html.
    Am I doing something wrong with the html widget? If a tracking code can't be added with a widget is there a way I can edit the source code directly? A text editor, maybe? I tried Word but but it wouldn't open the page.
    Thanks for any help!
    Rikki

    There's a way to add Google Analytic to pages without having to edit the page. It's a little bit of work but it's a one time process. Read about it here: http://www.wyodor.net/blog/archives/2010/05/entry_316.html
    Or you could add StatCounter to each page to get not only the number of hits but lots more information:
    Click to view full size
    This tutorial describes how to add it: Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet.
    OT

  • How can I get my Indesign script to apply to all pages in the document?

    My script (java) shown below will only apply to the first page of the document. How can i get it to apply to all pages of my document? What am I missing? Thanks.
    scirpt:
    myDocument = app.activeDocument
    with (myDocument.pages.item(0).marginPreferences){
    columnCount = 1;
    //columnGutter can be a number or a measurement string.
    columnGutter = "0";
    bottom = "0"
    //When document.documentPreferences.facingPages == true,
    //"left" means inside; "right" means outside.
    left = "0"
    right = "0"
    top = "0"
    inside = "0"

    Hi,
    You have to iterate through all pages.marginPreferences:
    var
      myDocument = app.activeDocument,
      allPagesMaPref = myDocument.pages.everyItem().marginPreferences,
      curPageMaPref;
    while ( curPageMaPref = allPagesMaPref.pop() )
      with (curPageMaPref) {
      columnCount = 1;
      //columnGutter can be a number or a measurement string.
      columnGutter = "0";
      bottom = "0"
      //When document.documentPreferences.facingPages == true,
      //"left" means inside; "right" means outside.
      left = "40"
      right = "0"
      top = "0"
      inside = "0"
    Jarek

  • How to view all pages of a multi-page HTML email in Mac Mail 5+ (Lion to Mavericks)?

    In previous versions of Mac Mail (up to that included with Snow Leopard, Mail 4), it was possible to scroll through all pages of a multi-page HTML email, like that send from the Tivoli Storage Manager reporting system.
    Since Lion, that has not been possible. The first page displays, but that's it.
    As a possible complication, I'm accessing an Exchange server, not IMAP.
    I have not been able to find a setting that might be related to this, nor have I found anyone who seems to be perturbed by this issue. Perhaps there's very few of us trying to read multi-page Tivoli reports on a Mac.
    In any case, I would prefer not to switch to a different mail app, or sign on to the Outlook Web Service version of our email to see the full report.
    Any thoughts?

    I've been able to find someone willing to do some testing that I can't do without installing old versions of Reader on my computer.  The surprising (to me) result is that the Submit button causes the problem.  By simply removing the Submit button, Reader 10 is now able to print page 1.  The Submit button was set up to do a "mailto".  I don't know whether other destinations also cause the problem of the page not printing with old versions of Reader.

  • Photos from computer have lines running through them on iphone???

    I have had no trouble getting my photos of my cute little baby girl from my computer to my iphone. However it is useless b/c there are weird lines running through all the photos making it impossible to view the photos. I thought this would be a great way to show people baby pictures but is not working out so far.
    Any idea what I am doing wrong?
    I have a PC and a Canon digital camera.

    cew404,
    This article may be of some assistance:
    http://docs.info.apple.com/article.html?artnum=306525
    Hope this helps,
    Nathan C.

Maybe you are looking for