One Output with multiple communication types

Hello,
My requirement is to print the document as well as send an email to the customers from the same output. Basically One output with multiple communication types ( PRINT & EMAIL). How to configure this in the output type configuration area? Please reply. Thanks

This should be possible with the same output type,
have the output type defined with multiple medium in NACE under processing routines. (say print out in one line & external send in another).
have the condition record maintained appropriately for different customers with different medium.
Note: if your access has customer, dont think you can maintain both 1 & 5 for the same access.
if this functionality is required, i think you can acheive this by maintaining the output under different access, but this will not ensure the same condition type flowing into the document unless the earlier condition type goes to processed status.
Thanks & Regards
Ilango

Similar Messages

Flat File with multiple record types (OWB 10.2.0.2)

Hi!
I`m using OWB 10.2.0.2 and I`m trying to load a flat file with multiple record types, using SQL LOADER.
In the flat file editor in the Record tab, I`ve set the type values and the corresponding record names like this:
Type Value Record Name
======== ===========
T TRAILER
0 DETAILS
1 DETAILS
2 DETAILS
When using this flat file in a mapping to load the data in a staging table, the generated code looks like this:
INTO TABLE TRAILER
TRUNCATE
REENABLE DISABLED_CONSTRAINTS
WHEN (1:1) = 'T'
INTO TABLE DETAILS
APPEND
REENABLE DISABLED_CONSTRAINTS
WHEN (1:1) = '0,1,2'
The above clause (WHEN (1:1) = '0,1,2') is wrong as I expect one "INTO TABLE..." clause for each record type.
Could this be a bug or am I doing something wrong?
Thanks a lot for your help,
Yorgos

We`re using two target tables, one for the trailer record and the other for the details records.
We are facing this problem from the moment we upgraded from OWB 10.1 to OWB 10.2.0.2, so we think it must be something with the way the sql loader code is generated in the new version.
As our data sources are mainly flat files coming from mainframes, this is a huge problem for us. We even asked an expert in DW from Oracle to help us on this, but still haven`t found a solution.
Is there any workaround for this or should we forget sql loader and go with an external tables + custom PL/SQL code solution?
Your help is greatly appreciated Jean-Pierre.
Regards,
Yorgos

How do i take one layer with multiple selections...

how do i take one layer with multiple selections and make those selections their own layer?

Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

One order with multiple lines in OM is creating multiple invoices

Application: Oracle 11i (11.5.3)
Modules implemented: GL, OM, AR, AP, PO and CM
Business Requirement:
Our client would like to create Order consisting of multiple lines in Order Management.
The Orders created in OM with multiple lines could be booked, picked, released and transferred
over to Accounts Receivable. On transferring over the Orders from Order Management to Accounts
Receivables using Auto Invoice process the Order should create ONE invoice with multiple lines.
Moreover, for the multiple lines created on an invoice deferred revenue could be applied.
( eg. An order is placed for software and support. The support is to be invoiced all at once but revenue deferred to 1/12
recognized each month as revenue is earned.)
Right now we are getting two invoices. It is putting the deferred revenue item on a seperate invoice. Is this normal
functionality? How can I get both on one invoice.
thanks

Hello Monique,
Well you can have one invoice generated for an order with multiple lines. This is possible by changing some rules in Account Receivables. Use the grouping rules under setups->autoinvoice in AR. You can club your invoices based on any of the columns of ra_interface_lines_all. Hope this works for you.
Arvind

How to have one provider with multiple portlets in JDev 11g

Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks

Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks

BPEL Process with multiple file types using one FTP adapter is not working

i created a bpel process which will fetch the files from remote location using FTP adapter.
Now the process works for only one format or file type like *.xls.
How can i use more than one file format in one FTP adapter.
OR
is there any other way to do it.
file type assignation is 5th step in FTP adapter configuration.
i have tried *.xls,*.csv and *.xls;*.csv and *.xls:*.csv by seperating with comman, colon, space... still not working.
i read the documentation *.* will not work.. for one file format it's working fine.
looking forward for reply as soon as possible.

Are you positive that it is not working? I'm not sure how you can use one FTP adapter for multiple file types unless the underlying data is exactly the same format or you are processing it as opaque data. Sometimes when a FTP adapter chokes on a file with a bad structure it doesn't create a BPEL instance, it simply moves the bad file to a separate folder.
So I assume you are using opaque as the data type instead of using an XSD element?
That said, I don't think you can put two separate file types in the filter. Is it possible for you to do something like: CommonFileName*.* or do you have similar files with other extensions?
I know the above probably isn't of much help, but I had so many problems with the FTP adapter and its lack of features that I am writing my own. Unfortunately that is a large undertaking and there isn't any good documentation of JCA resource adapter / BPEL PM integration.

XML output with multiple tags in one line

I have not done much XML exporting with SQL. Previously I had just been ending my SQL queries with
FOR XML RAW ('Company'), ROOT ('Companies'), ELEMENTS;
and it formatted my query nicely in an XML output. That put every column name as a tag and the cell data within the tag.
However, now the criteria has changed on me. I need to create a tag with multiple sub tags in it.
Example: <Location Floor="10" Suite="512" DoorType="Metal">
But I'll still need other tags to be normal in the XML output such as
<Address>123 Fake St</Address>
<City>Springfield</City>
<Location Floor="10" Suite="512" DoorType="Metal">
Is there any way to get this XML mixed in the output like above?
Thank you for any help.

Hi, you can FOR XML PATH for a finer degree of control over your XML. Use the @ symbol to create attributes. Here's a simple example:
DECLARE @t TABLE ( rowId INT IDENTITY PRIMARY KEY, [address] VARCHAR(50), city VARCHAR(30), floor INT, suite INT, doorType VARCHAR(20) )
INSERT INTO @t VALUES
( '123 Fake St', 'Springfield', 10, 512, 'Metal' )
SELECT
[address] AS "Address",
city AS City,
[floor] AS "Location/@Floor",
suite AS "Location/@Suite",
doorType AS "Location/@DoorType"
FROM @t
FOR XML PATH ('Company'), ROOT ('Companies'), ELEMENTS;

One STO Type with multiple Delivery Types

Hi,
We have a requirement in our company, In the STO line item level we have Shipping Tab in that we will get the delivery type based on the configuration u201CAssign Delivery Type and Checking Ruleu201D here we assign in the combination of STO document type and supplying site and delivery type,
Our client requirement is that can we assign multiple delivery type's for the same STO document type and supplying site, if yes on what bases we need to differentiate the same.
This is because we need the different functionality I.e. for one type deliveries we need the packing mandatory and other type of deliveries we have not require the packing functionality.
Thanks & Regards,
Murali.M

Hi,
i don't think it's possilbe to have more then one delivery type per sto.
Check if you have the possiblity to set up an dependent layout. E.g. if Material A is a FERT then do packing, if HALB not, etc.
regards, Paul.

Flex services with multiple return types

Hello,
We are creating a webapplication with flex and php.
Everything is working very good, until we got to the library part of the application.
Every service so far had only 1 return type (eg: User, Group, ...)
Now for the library we want to return a ArrayCollection of different types of objects. To be more specific the LibraryService should return a ArrayCollection containing Folder and File objects.
But how to configure this in Flex (Flash Builder 4 (standard))?
So far it converts every object to the type Object, i would really like it to be Folder or File
The only solution we can think of right now is to create a new object Library that will contain 2 ArrayCollections, one of type Folder and one of type File. This could work ofcourse, but I wonder if there is a better solution for this OR that i can configure multiple return types for a service.
Any ideas/advice is greatly appreciated.

Normally if you are using Blazeds(Java stuff, i'm sure there should be something similar for php), you can map java objects to that of the AS objects, when you get the data back you are actually seeing the object which is a Folder or a File object rather than just a Object.

How can I merge all of the new FF windows that are open into one window with multiple tabs? Safari has a merge windows feature that I like. This is really nice when conducting reasearch on multiple sites at the same time.

When I clik on weblinks they all open into new windows making it somewhat painful to clik on window in the menu bar to go to each new page. I would rather have a feature that would allow me to merge all of those individual windows into tabs within one page.
== This happened ==
Every time Firefox opened

Thank you. That worked. I was able to open 1 window with multiple tabs. Thanks cor-el!

How to use one PSE with multiple URLs?

I need to hit my DMZ SAP Web Dispatcher with multiple unique URLs. I am starting off using webdisp1.abc.com and webdisp2.vde.com. DNS will resolve both the Web Dispatcher Host. Following Tobias Winterhalter's Blog: Name-based virtual hosts and one SAP Web Dispatcher to access multiple SAP systems.
My question is how do I go about generating the pse so I can store both webdisp1.abc.com and webdisp2.vde.com? Do I just import the first request and initiate another certificate request using the same pse?
Example
sapgenpse gen_pse -s 2048 -p D:\<file path>\SAPSSLS.pse -r D:\<file path>\webdisp1.req CN=webdisp1.abc.com, OU=IT, O=XYZ Inc., C=US
Cheers,
Dan Mead

Hi Daniel,
what you are looking for are so called SAN certificates. As Martin said, with sapgenpse you are pretty out of luck. However you can create the certificates using openssl and then use sapgenpse to import them into a pse. There are a number of guides on how to create SAN certificates on the web, like the one mentioned by Martin from CAcert (which is one of the best imho) or this one. And there are also guides on the internet on how to convert OpenSSL keys to PSE.
You should however keep in mind, that SAN certificates are more expensive than standard certificates. Therefor they only pay if the hostnames in there are stable for the lifetime of the certificate. If the hostnames need to change once a year, you already will be better off (from a cost perspective) by creating one pse per hostname an let the webdispatcher listen to different addresses, as each hostname requires a new certificate signed by the CA.
Please also make sure, the systems and browsers connecting to your webservers are able to understand SAN certificates. For SAP systems this requires at least pl24 of the sapcryptolib.
Kind regards,
Patrick

Load data from a file with multiple record types to a single table-sqlldr

We are using two datastores which refer to the same file. The file has 2 types of records header and detail.
h011234tyre
d01rey5679jkj5679
h011235tyrr
d01rel5678jul5688
d01reh5698jll5638
Can someone help in loading these lines from one file with only two data stores(not 2 separate files) using File to Oracle(SQLLDR) Knowledge Module.

Hi,
Unfortunately the IKM SQLDR doesn't have the "when" condition to be wrote at ctl file.
If you wish a simple solution, just add an option (drop me a email if you want a LKM with this)
The point is:
With a single option, you will control the when ctl clause and, for instance, can define:
1) create 2 datastores (1 for each file)
2) the first position will be a column at each datastore
3) write the when condition to this first column at the LKM in the interface.
Does it help you?

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

Managed metadata columns in document information panel with multiple content types

Hi everyone,
The problem I have is that for custom content types not all managed metadata columns are displayed in Document Information Panel (DIP) for the document in the Office client application.
However, everything works fine with 1 specific content type. Even though the others using exactly the same site columns. The content types are deployed using visual studio to the content type hub, and after this the content types are correctly published to
the site collections, there are no publish issues here.
When I create a document based on the second content type in the same library, all fields are showed in the document information panel, except the managed metadata columns.
Detailed explanation:
Library: procedures
Content types:
- simple procedure (with 4 managed metadata fields and some other text fields)
- procedure with approval (with the same 4 managed metadata fields and some other text fields)
Scenario 1: I add the 'simple procedure' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 2: I add the 'procedure with approval' content type to the procedures library as only content type. Everything works fine, and all fields show correctly in the document information panel in Word.
Scenario 3: I add the 'simple procedure' and 'procedure with approval' content types to the document library procedures (added simple procedure first). When I create a new document based on the 'simple procedure'
content type, everything works fine and he shows all metadata fields. When I add a new document based on the 'procedure with approval' content type, the document information panel shows correctly, except all managed metadata fields. These are not visible at
all. Though they worked perfectly in scenario 1 and 2.
Is this a known issue or is there a workaround for this?
Thanks in advance!
Kind regards, Davy

Yes!
This problem is solved right now.
My issue was that I'm using custom content types deployed by Visual Studio in the content type hub. To create a managed metadata site column in visual studio, you need to have first of all your managed metadata field, but also a hidden field accompagnied
to make the actual mapping like the example below:
<Field ID="{B654D984-187A-471B-8738-F08F3356CFDA}"
Type="TaxonomyFieldType"
DisplayName="Countries"
ShowField="Term1033"
EnforceUniqueValues="FALSE"
Group="Demo"
StaticName="Countries"
Name="Countries">
<Customization>
<ArrayOfProperty>
<Property>
<Name>TextField</Name>;
<Value xmlns:q6="http://www.w3.org/2001/XMLSchema" p4:type="q6:string" xmlns:p4="http://www.w3.org/2001/XMLSchema-instance">{67308AC2-9556-456B-BF9E-43E8F23EBEE6}</Value>
</Property>
</ArrayOfProperty>
</Customization>
</Field>
<Field Type="Note"
DisplayName="Countries_0"
StaticName="CountriesTaxHTField0"
Name="CountriesTaxHTField0"
ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}"
ShowInViewForms="FALSE"
Required="FALSE"
Hidden="TRUE"
CanToggleHidden="TRUE"
Group="Demo"
RowOrdinal="0"
/>
</Elements>
VERY important here is that when you create your content type using visual studio, you not only have to add the managed metadata site column in your xml (which let the content type work already perfectly) but also add the hidden field to your content type
xml !! This way, SharePoint knows that when you have multiple content types with the same site columns in the same library, the second content type also need to get the hidden field from this site columns like in the example below!
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
;
<ContentType ID="0x010100571ebc0f478a49d5a775039347ee1535"
Name="Document Location"
Group="Demo"
Description="A content type containing Managed Metadata Column."
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{B654D984-187A-471B-8738-F08F3356CFDA}" Name="Countries"/>
<FieldRef ID="{67308AC2-9556-456B-BF9E-43E8F23EBEE6}" Name="CountriesTaxHTField0"/>
<FieldRef ID="{f3b0adf9-c1a2-4b02-920d-943fba4b3611}" Name="TaxCatchAll"/>
<FieldRef ID="{8f6b6dd8-9357-4019-8172-966fcd502ed2}" Name="TaxCatchAllLabel"/>
</FieldRefs>
</ContentType>
</Elements>
I'm very happy I found this solution, because in the whole project i'm implementing, this was used a lot!
Special thanks to the blog of @cann0nf0dder (http://cann0nf0dder.wordpress.com/2013/04/01/creating-a-site-column-with-managed-metadata) which let me think about this!
This ticket is answered now! :-)
Kind regards,
Davy

One Output with multiple communication types

Similar Messages

Maybe you are looking for