One Page HTML Folio - navigation and analytics?

Hey there.
I need some advice. My company is thinking about making a folio but all done in HTML. So it would essentially be a one page website with multiple "articles." All of the navigation would be done in HTML.
If we did this:
1) would we be able to tap into the native navigation (when you tap the screen and the top & bottom nav comes up - you can scrub through articles or skip to a specific article)
2) could we have the folio shoot off all of the same analytics we would have if we built it the regular DPS way.

1. AFAIK, tapping on a web area does not bring up the nav bar. I'll leave that to someone else to answer
2. With Site Catlyst Analytics(JavaScript API) yes, its possible to capture all of the individual tabs/HTML analytics. The default Analytics would only report as web content

Similar Messages

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

JS: How to make a script to print one page at a time and set print job name?

What I want is to print one page at a time to the printer.
Document.print(false, app.printerPresets.item(0)) almost get me there. But how do I get it to print page by page? There seems to be no way to set which page to print to printerPreset.
Also, is it possible to change print job name from the default of using document name?

>Is there any solution to this other than saving the document to a different name before each page print?
Here is an altered and abriged version of the script that I use. I use print preset called "PS to PDF" in it, so you should change it to your own.
if(app.documents.length == 0){
   alert("Please open a document and try again.");
   exit();
var myFolder = Folder ("~/Desktop");
var myDoc = app.activeDocument;
var myNoExtention = getFileNameOnly (myDoc.name);
var myPrintPrefs = myDoc.printPreferences;
if (app.printerPresets.item("PS to PDF") == null) {
   alert("Preset \"PS to PDF\" has not been installed");
   exit();
else {
   myPrintPrefs.activePrinterPreset = app.printerPresets.item("PS to PDF");
myDoc.sections.everyItem().sectionPrefix = "";
myDoc.sections.everyItem().includeSectionPrefix = false;
   var stop = myDoc.pages.length;
   var w = new Window ( 'window', 'Printing PS-files' );
   var pb = w.add ('progressbar', [12, 12, 300, 24], 0, stop);
   var txt = w.add('statictext');
   txt.bounds = [0, 0, 200, 20];
   txt.alignment = "left";
   w.show()
for(var myCounter = 0; myCounter < myDoc.pages.length; myCounter++){
   curPage = myCounter + 1;
   pb.value = curPage;
   var myText = String("Page " + curPage + " of " + myDoc.pages.length);
   txt.text = myText;
   var myPageName = myDoc.pages.item(myCounter).name;
   var cornumber = pagenum(myPageName);
   var myFilePath = myFolder + "/" + myNoExtention + "_" + cornumber + ".ps";
   var myFile = new File(myFilePath);
   myPrintPrefs.pageRange = myPageName;
   myPrintPrefs.printFile = myFile;
   myDoc.print(false);
w.hide();
alert("Done!");
function pagenum(myNumber){
   if (myNumber >= 1 && myNumber <= 9)
   x = "0" + "0" + myNumber;
   else if (myNumber >= 10 && myNumber <= 99)
   x = "0" + myNumber;
   else if (myNumber >= 100 && myNumber <= 999)
   x = myNumber;
return x
function getFileNameOnly (myFileName) {
   var myString = "";
   var myResult = myFileName.lastIndexOf(".");
   if (myResult == -1) {
      myString = myFileName;
   else {
      myString = myFileName.substr(0, myResult);
   return myString;
Kasyan

Custom Master Page with Top Navigation and Left Navigation

Hi All,
I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site.
But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
nav like the SharePoint Current Navigation alternative but within my Page Layout.
Is there an option to chat within these forums?
Could someone help me to solve this problem?
Thanks and regards,
Chiranthaka

Hi,
In your HTML Page Layout, is your "current navigation" in its own content place holder, such as "PlaceHolderLeftNavBar" or did you add the current nav to the "PlaceHolderMain"?
Can you add CSS that hides the left nav found in each content page so that you do not have to manually remove the left nav? Then you could simply add the current nav back into the Master Page.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Folio articles and analytics

I have a book that I want to convert from 100 pages that was designed in InDesign.
In order for analytics to work to analyze which articles were viewed the most, do I have to have separate InDesign files as articles or will Analytics tell me which page was viewed the most for a single InDesign file? That would basically mean 100 InDesign files...

Hi Chris - thanks for your reply. The entire InDesign document was built as one document - not chapters. There are no chapters as it's an artbook. Do I need to put each page with content in it as its own InDesign document and make it an article or will analytics track each page of there being only one article and give me information on each of these pages?

Prior to updating the iphone 5 to ios.7, i used to be able to go to Notes and scroll through all listings until I found what I wanted. Now i am only able to view one page at a time and have to back and forth between the main menu and each page. Help?

Prior to updating my iPhone5 to the "new and improved" ios.7, I used to be able to go to my Notes app and scroll through the various categories until I found the item I was looking for. Now, under the "improvements" I have to open each page, one at a time, until I find the desired category. This strikes me as a big step backword. Any solutions in the community?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

PLW NTR prints one page, then a blank, and stops

I have a dependable 18 year old Personal Laserwriter NTR printer which has been running with a Dell running Windows XP for a couple of years. The printer is connected via a parallel cable to the computer. The printer has suddenly started printing only the first page of a multi-page document, then prints a blank and stops printing while the top light on the printer keeps flashing. However, if I open and close the feeder door, the next page and a blank will print, and the cycle repeats. Thinking that the printer driver "broke," I deleted the printer control program from the control panel and installed a new copy of Apple Personal LaserWriter NTR v2010.129 from the XP program. No change in the status. I have used Word, Excel and Wordpad with the same results. Any ideas as to the problem and how to correct? Thanks

This should help you out...
http://www.fixyourownprinter.com/kits/Apple/K53
Sometimes sticking solenoids will cause this issue too, but if it were mine, I'd install the kit I mention above first, and see if that fixes it.
Let us know how you fare.
Cheers,
Jason

When I try to print, I get one page with a header and the background image, another page with the content, and a third page with a footer and background image. How can I make it print properly?

Also, if I print to a .pdf, the background does not show up even if I have the checkbox checked to print background image.
The site I'm trying to print is:
[http://www.puertovallartatours.net/coupons-discounts.htm http://www.puertovallartatours.net/coupons-discounts.htm]

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

Embed pdf in website, show one page at a time, with forward and back controls?

Hi,
Not sure if this is possible (or if this is the right place to ask), but I need to take a multiple page pdf, embed it in a website so its on the left half of the screen, have it only show one page at a time, and have the forward and back page controls.
Is this possible, and if so, could someone point me in the right direction?

Typically you would save it to a JPeg and post those on the web site. Expecting a PDF to show up depends on the client computer configuration and browser. This is too risky, unless you don't mind getting nasty little notes that it does not work. If you do it with JPegs, then all the browsers I know of can handle it. Then simply put the PDF separately for those who prefer to download the PDF and look at it separately.

Open one page within a page

Hello I have a BSP page and a push Button on this screen.
However on the hit of this Push Button some code would trigger and then I want to open another web page.
Any Suggestions...
Thanks,
Ster

Hi Friend,
Within the ontest method,write the below coding for navigating from one page to another.
navigation->next_page( 'TONEXT' ).
TONEXT is a userdefined name.
Following that you should do the following procedures.
Double click on the application name and proceed with steps below
specify the name of the current page under start ,
specify the 'TONEXT' variable under navigationrequest and
finally specify the target page name under target
With Regards,
SHARMILA BRINDHA.M

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

If I open another URL from my homepage, the "go back one page" button is grayed out so I can't get back to my home page.

This problem only started recently.
Opening another web page (URL) from my homepage always opens in the same tab and the "go back one page" button is gray and does not work. If I open a series of web pages in the same tab the green "back" button is green. Clicking on the "recent pages" down arrow will allow me to go back, but only to the page after the home page.
In other words, after browsing, I can get back to the opening page (my home page) only by clicking on the house icon but not by using the "recent pages" function.
Is there an option that changed after the last update?

Do you see any tab history if you right click the Back or Forward button?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How do I move an app icon from one page to another?

I would like to organize my Ipad2 but can figure out how to move the app icon from one page to another.

Tap and hold down on an app icon until it wiggles. Then hold down on the icon and drag it about halfway over to the next screen and just hold it there for a second or two and the app will jump to the next page. Do it slowly and just hold the app on the edge of the screen. Don't try to drag it over quickly. It takes a little practice.
Tap the home button when you are done and the apps will stop wiggling.

How can i print a one page spread sheet without having it spread over several sheets of paper none of which is complete?

I have an iMac less than 1 year old with lion o/s and numbers. i have been spoiled in the printing of spread sheets on PC's. I find it impossible to print only 1 page when printing a single page spread sheet. The result is my spread sheet spread over several sheets of paper with no usable spread sheet printed. Can anyone help this 86 year old man who has been to the Apple Store twice to learn this but I still have trouble. Thanks in advance for your help. jim

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How do I make preview show only one page at a time in full screen

When I show a document using full screen (or slideshow) in Preview, it shows two pages at a time. I just want to show one at a time, but can't find anything that lets me specify this. There is no relevant Preference that I can see, and if I check single page in view and then choose full screen or slideshow in view, the first page is displayed fine, but then subsequent pages are displayed two up.

Hi, Eric,
Thanks. It looks like I didn't quite make my question clear enough, though.
I want to show a multi-page document one page at a time. If I open it and choose "full screen" in view, I get the first page showing just fine. But if I then use the arrow to go to the second page, Preview shows two pages (#2 and 3), and then continues to show the rest of the document two pages at a time when I advance using the arrow.
I want to show one page at a time, and be able to advance to the next page using the arrow.
Can I do this in Preview?
Thanks,
Russ

One Page HTML Folio - navigation and analytics?

Similar Messages

Maybe you are looking for