One pricing condition for BOM and other for individual component

Hello SAP gurus,
We have two pricing condition types created and assigned in the pricing procedure which has been created with reference to PR00 and condition records are maintained for both the condition types.
But, we want only one pricing condition type to be triggered in the sales order depending on the usage of material in the sales order. As we are selling the same material individually and as well as a component in a bundle ( BOM).
i.e, when one pricing condition for BOM component and other for individual component
What are the configuration steps to be taken care to get this scenario?
Thanks in advance.
Regards,
KB
Edited by: K.byla on Jan 21, 2010 1:20 PM

Hi Sagar,
Thanks for your response.
Yes, we are maintaining only one material. The same material is used to sell individually and also in a BOM.
As i have mentioned earlier, whenever the material is sold individually it should pick condition type say 'YR00' and when the same material is sold as a bundle ( BOM) , it should pick condition type " YR01" in same the pricing procedure.
For both the condition types, the condition records are maintained.
To give the scenario details,
A material "X" is sold individually as a single component and the same material is also used for selling bundled with other material "Y" and the bundled material as "Z"
means, Z=X+Y
Pricing procedure used is say ZRA000 which contains currently the price cond type YR00.
Now for the bundle (BOM) involvement i want to use the same pricing pricing proc. and add the new cond YR01 in it so that the system will pick the cond.type YR00 when the material is sold individually and YR01 is taken as the price when the material is sold as a bundle against the item X.
Need to know the steps for this scenario and do i need to maintain a specific requirement ? please suggest.
BR,
KB

Similar Messages

Dectivate pricing condition for sales order not service order.

Hi,
We are on ECC6.0 and CRM5.0
I need to add new condition type to the existing pricing procedure.It should be activtaed only for service orders and not for sales order.I can achive this by adding new requirement in pricing procedure to limit this condition type based on order type.
Example: if KOMK-AUART eq ORDER_TYPE.
sy-subrc = 0.
But I don't want to do this,because I would need to change this requirement everytime I add new service order type.
Is there any field in Pricing structure KOMK bu using which we can achieve this. ?
Please suggest any other idea by which I can achieve this
Thanks
Dona

Currently ,we have one pricing procedures for both the scenarios...
We control if the perticular condition type to be active or not by writing a requirement which checks the order types.
This has been done this way because we built the pricing procedure in ECC and tranfer it to CRM.Also we donot have service orders in ECC.
any further alternatives guys..

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Pricing condition for Taxes in R/3 not being calculated.

We have SRM4.0 in classic mode with R/3 4.6C. In SRM we configured Tax calculation is in R/3. When creating the shopping cart, EBP calls R/3 via RFC for the Tax % and displays the tax information in the cart successfully. The cart is saved and the completed PO is created in R/3. However, our pricing condition for tax, at Pur.Org/Material group in R/3 does not get calculated - so in the item condition screen, no tax is calculated. If i go into the change PO and in Item conditions/Update, (G-Copy Pricing and Redetermine taxes) then it is OK (but this is not ideal). When i do an RFC trace, using RSRFCTRC, i can see my Pur Org, Material Group and Tax code all being passed to R/3. Also, when i do a manual SE37 test on funct.mod. BAPI_PO_CREATE, it does calculate tax correctly - i am stuck - any help appreciated. rgs Adam

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Pricing Condition for Serivce Line Item

Hi Experts,
I'm trying to create a service PO with 1 Service line item and this service line item actually contains more than 1 service number. Using BAPI_PO_CREATE1, how can I define the pricing condition for each of the service number?
Currently, I'm able to define the pricing condition of the service item as a whole through this input parameter table POCOND.
Thanks.
Best Regards,
Weishan

Its really tricky requirement, when you are going for manual condition type.
- the best alternative to cater your requirement is to go for maintenance of condition record, which you can upload at mass with the help of LSMW. Also, will be really helpful in having report for pricing. Finally, reduce time to create sales order. Thus, discuss & encourage your user to maintain pricing based condition record. Only header condition should be on manual bases.
- If hard to convince your client on condition record. Then develop a routine with the help of ABAPer in your team. Where you can put logic. If the condition is manual enter and system is able find already entered value for material, then copy the price the slots where system don't find manually entered condition value.
Regards
JP

Need a list with pricing conditions for each customer

Hi experts,
I am searching for a function module or BAPI which reads out all the pricing conditions for a certain customer. The FM/ BAPI should provide the pricing conditions in an internal table.
Now I do this with BAPI_SALESORDER_SIMULATE.
It returns me all the condition types and condition values for a certain customer and material.
But this BAPI is very slow.
Can anybody help me to find a better solution?
Thanks & best regards, Reiner.

Hi,
Welcome to SDN.
If you are using ECC 5 or 6 then
BAPI_PRICES_CONDITIONS
a®

Maintain pricing conditions for the material for the excise invoice date

When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
I request if any one can provide me the solution

Hi,
Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
SPRO -
> Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

Manual Pricing Condition for sales order!!

Hi,
I have an issue, My requirement is I have to add a manual pricing condition in sales order header level. I have define the pricing condition for Freight Charges and that I have added to the pricing procedure that we have used for the transaction.
The problem is when Iam creating the order in the condition tab manully want to choose the condition type, but what I created condition type (Freight Charges) is not appearing in the view. Only exesting condition types only appearing in tha selection view. I am on CRM Stand alone
Pls anyone can advise where I miss the setting, I am new in CRM PRICING
Regards
VJ

Hello VJ,
You must consider that there is a setting "manual" in the pricing procedure customizing, indicating that the condition must be manually entered, and also a setting in condition type customizing regarding changes that can be made. In condition type customizing you should NOT have option D "Not possible to process manually". Have you checked condition type customizing?
Additionally please execute function module from note 867428 ( IPC_DET_CLEAR_CUST_BUFFER ).
This will ensure that all the customizing changes are immediately available ( otherwise you would need to wait until the automatic buffer refresh occurs, by default once per day
Best Regards
Luis Rivera

Can we maintain more than one shipping condition for a customer

Hi,
Can we maintain more than one shipping condition for a customer

Hi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi.

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

Change Pricing Condition for an item with CRM_ORDER_MAINTAIN

Hi community,
I try to change an existing condition with the function module crm_order_maintain.
Everything looks fine, no error no dump, but no success
The condition stays the same!
Can anybody find a solution for this?
Heres my report so far:
*& Report ZTEST_PRICING2
REPORT ztest_pricing2.
DATA: lt_guid      TYPE crmt_object_guid_tab,
      lt_item      TYPE crmt_object_guid_tab,
      lt_saved     TYPE crmt_return_objects,
      lt_pridoc    TYPE crmt_pric_cond_t,
      ls_pridoc    TYPE crmt_pric_cond,
      lt_pricom    TYPE crmt_pridoc_comt,
      ls_pricom    TYPE crmt_pridoc_com,
      lt_header    TYPE crmt_orderadm_h_comt,
      lt_input     TYPE crmt_input_field_tab,
      ls_input     TYPE crmt_input_field,
      ls_input_fn TYPE CRMT_INPUT_FIELD_NAMES,
      ls_cond_chg TYPE prct_cond_external_change,
      ls_cond      TYPE PRCT_COND_DU,
      lt_pricing_i TYPE CRMT_PRICING_I_WRKT.
PARAMETERS: lv_head TYPE crmt_object_guid DEFAULT 'C4C61C4E35DDF306E10000000A024089'.
PARAMETERS: lv_item TYPE crmt_object_guid DEFAULT '09C71C4E35DDF306E10000000A024089'.
PARAMETERS: lv_kbetr TYPE prct_cond_rate DEFAULT '100'.
INSERT lv_head INTO TABLE lt_guid.
INSERT lv_item INTO TABLE lt_item.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
    it_header_guid                    = lt_guid
    it_item_guid                      = lt_item
*   IV_MODE                           =
*   IV_ONLY_SPEC_ITEMS                =
*   IT_REQUESTED_OBJECTS              =
*   IV_NO_AUTH_CHECK                  =
*   IT_ITEM_USAGE_RANGE               =
*   IV_SUBITEM_DEPTH                  = -1
*   IT_OBJECT_FILTER                  =
*   IV_ONLY_CHANGED_OBJ               = FALSE
*   IV_STATUS_H_CHECK_RELEVANCE       = FALSE
IMPORTING
    et_pridoc                         = lt_pridoc
    et_pricing_i                      = lt_pricing_i
* CHANGING
*   CV_LOG_HANDLE                     =
EXCEPTIONS
   document_not_found                = 1
   error_occurred                    = 2
   document_locked                   = 3
   no_change_authority               = 4
   no_display_authority              = 5
   no_change_allowed                 = 6
   OTHERS                            = 7.
IF sy-subrc <> 0 AND lt_pridoc IS NOT INITIAL.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE lt_pridoc INDEX 1 INTO ls_pridoc.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE ls_pridoc-pric_cond INTO ls_cond WITH KEY kschl = 'PB00'.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
ls_input-ref_guid   = lv_head.
ls_input-ref_kind   = 'A'.
ls_input-objectname = 'PRIDOC'.
ls_input_fn-fieldname = 'WAERS'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
ls_input_fn-fieldname = 'KBETR'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
INSERT ls_input INTO TABLE lt_input.
ls_pricom-ref_guid   = lv_head.
ls_pricom-ref_kind   = 'A'.
*ls_pricom-PRICING_TYPE = 'B'.
*ls_pricom-pricing_procedure = 'ZZMTA'.
ls_pricom-pric_cond[] = ls_pridoc-pric_cond[].
MOVE-CORRESPONDING ls_cond TO ls_cond_chg.
ls_cond_chg-waers = 'EUR'.
ls_cond_chg-kbetr = lv_kbetr.
INSERT ls_cond_chg INTO TABLE ls_pricom-cond_change.
APPEND ls_pricom TO lt_pricom.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
    it_pridoc         = lt_pricom
CHANGING
*    ct_orderadm_h     = lt_header
    ct_input_fields   = lt_input
EXCEPTIONS
    error_occurred    = 1
    document_locked   = 2
    no_change_allowed = 3
    no_authority      = 4
    OTHERS            = 5.
IF sy-subrc <> 0.
EXIT.
ENDIF.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    it_objects_to_save         = lt_guid
IMPORTING
    et_saved_objects           = lt_saved
*   ET_EXCEPTION               =
*   ET_OBJECTS_NOT_SAVED       =
EXCEPTIONS
   document_not_saved         = 1
   OTHERS                     = 2.
IF sy-subrc EQ 0.
COMMIT WORK AND WAIT.
ELSE.
ROLLBACK WORK.
ENDIF.
regards
Markus

Hello Jordi,
The example below is whereby i was trying to copy all the pricing condition on one document to another and deleting what's not present on the source document.
You can used this piece of code to adapt your requirement.
CALL FUNCTION 'ZCRC_FM_COPY_PRICE_COND_ALL'
          EXPORTING
id_object_guid_src    = <fs_el_con_guid>
id_object_guid_dest = <fs_el_so_guid>
id_commit                  = abap_false
          EXCEPTIONS
not_allowed         = 1
error_occured     = 2
OTHERS                 = 3.
PERFORM f_recup_donnees USING     id_object_guid_src
                                                          id_object_guid_dest.
PERFORM f_modif_condition_prix USING id_object_guid_src
                                                                                  id_object_guid_dest.
PERFORM f_header_copy_pricing using id_object_guid_src
                                                                        id_object_guid_dest.
FORM f_recup_donnees   USING      pd_object_guid_src TYPE crmt_object_guid
                                                                       pd_object_guid_dest TYPE crmt_object_guid.
DATA:
     lt_header_guid        TYPE crmt_object_guid_tab.
INSERT pd_object_guid_src INTO TABLE lt_header_guid.
INSERT pd_object_guid_dest INTO TABLE lt_header_guid.
CLEAR: gt_orderadm_i, gt_doc_flow.
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = lt_header_guid
    IMPORTING
      et_doc_flow          = gt_doc_flow
      et_orderadm_i        = gt_orderadm_i
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
IF sy-subrc NE 0.
    RAISE error_occured.
ENDIF.
" F_RECUP_DONNEES
FORM f_modif_condition_prix USING pd_guid_src TYPE crmt_object_guid
                                  pd_guid_dest TYPE crmt_object_guid.
DATA : ld_pd_handle_src     TYPE prct_handle,
          ld_pd_handle_dest    TYPE prct_handle,
          lt_komv_print_src    TYPE prct_cond_print_t,
lt_komv_print_dest   TYPE prct_cond_print_t,
          ls_komv_print_dest   LIKE LINE OF lt_komv_print_dest,
          ls_komv_print_src    LIKE LINE OF lt_komv_print_src,
          lt_cond_chg          TYPE prct_cond_print_t,
          lt_cond_chg_insert   TYPE prct_cond_print_t,
          ls_cond_chg          TYPE prct_cond_print,
          ls_cond_chg_tmp      TYPE prct_cond_print,
          ls_input_fields      TYPE crmt_input_field,
          lt_input_fields      TYPE crmt_input_field_tab.
DATA : bal_log         TYPE balloghndl,
         lt_item_ret     TYPE prct_item_ret_t,
         lt_cond_ret     TYPE prct_cond_print_t,
         ld_data_changed TYPE xfeld,
         gv_decimal      TYPE usdefaults-dcpfm,
         ld_lines        TYPE i,
         ld_ajout_cond   TYPE abap_bool.
FIELD-SYMBOLS : <fs_orderadm_i_dest> TYPE crmt_orderadm_i_wrk,
<fs_orderadm_i_src>   TYPE crmt_orderadm_i_wrk,
                  <fs_cond_chg>         TYPE prct_cond_print,
<fs_cond_chg_insert> TYPE prct_cond_print.
* Début Ajout CD1K904313-001.
DATA: ld_guid_src TYPE crmt_object_guid.
FIELD-SYMBOLS: <fs_doc_flow> TYPE crmt_doc_flow_wrk.
* Début Ajout CD1K904313-001.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
*Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
iv_header_guid             = pd_guid_src
    IMPORTING
ev_pd_handle               = ld_pd_handle_src
    EXCEPTIONS
error_occurred             = 1
handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
      iv_header_guid             = pd_guid_dest
    IMPORTING
      ev_pd_handle               = ld_pd_handle_dest
    EXCEPTIONS
      error_occurred             = 1
      handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* A ne pas traiter les postes de type ZPDF
DELETE gt_orderadm_i WHERE itm_type = 'ZPDF'.
LOOP AT gt_orderadm_i ASSIGNING <fs_orderadm_i_dest> WHERE header = pd_guid_dest.
    REFRESH : lt_komv_print_src,
              lt_komv_print_dest,
lt_cond_chg,
lt_cond_chg_insert.
* Début Modif CD1K904313-001.
* Récupérer le guid de l'item liée au item destinataire.
    READ TABLE gt_doc_flow ASSIGNING <fs_doc_flow> WITH KEY objkey_b = <fs_orderadm_i_dest>-guid.
    CHECK sy-subrc EQ 0.
    ld_guid_src = <fs_doc_flow>-objkey_a.
*    READ TABLE gt_orderadm_i ASSIGNING <fs_orderadm_i_src> WITH KEY header = pd_guid_src
* number_int = <fs_orderadm_i_dest>-number_int.
* Fin Modif CD1K904313-001.
* Récupérer les pricing document
    IF sy-subrc EQ 0.
*     Document source
      CALL FUNCTION 'PRC_PD_ITEM_SHOW'
        EXPORTING
          iv_pd_handle        = ld_pd_handle_src
*         iv_item_no          = <fs_orderadm_i_src>-guid    "Supression CD1K904313-001
          iv_item_no          = ld_guid_src                 "Addition CD1K904313-001
        IMPORTING
          et_komv_print       = lt_komv_print_src
        EXCEPTIONS
          non_existing_handle = 1
          non_existing_item   = 2
          ipc_error           = 3
          OTHERS              = 4.
    ENDIF.
*   Document destinataire
    CALL FUNCTION 'PRC_PD_ITEM_SHOW'
      EXPORTING
        iv_pd_handle        = ld_pd_handle_dest
        iv_item_no          = <fs_orderadm_i_dest>-guid
      IMPORTING
et_komv_print       = lt_komv_print_dest
      EXCEPTIONS
        non_existing_handle = 1
        non_existing_item   = 2
        ipc_error           = 3
        OTHERS              = 4.
* Modification et Suppression des conditions de prix
    LOOP AT lt_komv_print_dest INTO ls_komv_print_dest .
      CLEAR: ls_cond_chg,
             ls_komv_print_src.
      MOVE-CORRESPONDING ls_komv_print_dest TO ls_cond_chg.
* Rechercher la condition sur le document source
      READ TABLE lt_komv_print_src INTO ls_komv_print_src WITH KEY kschl = ls_komv_print_dest-kschl
zaehk = ls_komv_print_dest-zaehk. "CD1K904313
      IF sy-subrc EQ 0.
        ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
        ls_cond_chg-kwert     = ls_komv_print_src-kwert.
        ls_cond_chg-kinak     = ls_komv_print_src-kinak.
      ELSEIF ls_cond_chg-kschl IS NOT INITIAL.
        CLEAR ls_cond_chg.
        CONTINUE.
      ENDIF.
*     Format décimal
      CASE gv_decimal.
        WHEN space.       "format N.NNN,NN
          REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
        WHEN 'Y'.         "format N NNN NNN,NN
          REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
      ENDCASE.
      INSERT ls_cond_chg INTO TABLE lt_cond_chg.
      CLEAR ls_cond_chg.
    ENDLOOP.
* Ajout des conditions de prix
    LOOP AT lt_komv_print_src INTO ls_komv_print_src WHERE kschl IS NOT INITIAL.
      CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp, ld_ajout_cond.
* Vérifier la présence de la condition sur le document destinataire
      READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk. "CD1K904313.
      IF sy-subrc EQ 0.
        CLEAR: ls_cond_chg, ls_komv_print_dest.
        CONTINUE.
      ELSE.
        DESCRIBE TABLE lt_cond_chg LINES ld_lines.
        READ TABLE lt_cond_chg INTO ls_cond_chg_tmp INDEX ld_lines.
        IF sy-subrc EQ 0.
          ld_ajout_cond = abap_true.
          MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
          ls_cond_chg-knumv     = ls_cond_chg_tmp-knumv.
          ls_cond_chg-kposn     = ls_cond_chg_tmp-kposn.
          ls_cond_chg-stunr     = ls_cond_chg_tmp-stunr + 10.
        ELSE.
          CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp.
          CONTINUE.
        ENDIF.
      ENDIF.
*     Format décimal
      CASE gv_decimal.
        WHEN space.             "format N.NNN,NN
          REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
        WHEN 'Y'.               "format N NNN NNN,NN
          REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
      ENDCASE.
* Récupérer les nouvelles conditions qui seront ajouté au document destinataire
      IF ld_ajout_cond EQ abap_true.
        INSERT ls_cond_chg INTO TABLE lt_cond_chg_insert.
      ENDIF.
      INSERT ls_cond_chg INTO TABLE lt_cond_chg.
      CLEAR ls_cond_chg.
    ENDLOOP.
    CALL FUNCTION 'PRC_INT_ITEM_INPUT'
      EXPORTING
        iv_pd_handle        = ld_pd_handle_dest
        iv_item_no          = <fs_orderadm_i_dest>-guid
        it_cond_prt         = lt_cond_chg
        iv_bal_log          = bal_log
        iv_req_ret          = abap_true
        iv_req_cond_prt     = abap_true
      IMPORTING
        et_item_ret         = lt_item_ret
        et_cond_prt         = lt_cond_ret
        ev_data_changed     = ld_data_changed
      EXCEPTIONS
        non_existing_handle = 1
        non_existing_item   = 2
        ipc_error           = 3.
    IF sy-subrc = 0.
*     En cas d'ajout de nouvelles conditions de prix, appeler le MF PRC_INT_ITEM_INPUT
*     avec les montants
      IF lt_cond_chg_insert IS NOT INITIAL.
        REFRESH lt_cond_chg[].
        lt_cond_chg[] = lt_cond_ret[].
        LOOP AT lt_cond_chg_insert ASSIGNING <fs_cond_chg_insert>.
          READ TABLE lt_cond_chg ASSIGNING <fs_cond_chg> WITH KEY kschl = <fs_cond_chg_insert>-kschl.
          IF sy-subrc EQ 0.
            <fs_cond_chg>-kwert     = <fs_cond_chg_insert>-kwert.
            <fs_cond_chg>-kbetr_prt = <fs_cond_chg_insert>-kbetr_prt.
          ENDIF.
        ENDLOOP.
        REFRESH lt_cond_ret[].
        CALL FUNCTION 'PRC_INT_ITEM_INPUT'
          EXPORTING
            iv_pd_handle        = ld_pd_handle_dest
            iv_item_no          = <fs_orderadm_i_dest>-guid
            it_cond_prt         = lt_cond_chg
            iv_bal_log          = bal_log
            iv_req_ret          = abap_true
            iv_req_cond_prt     = abap_true
          IMPORTING
            et_item_ret         = lt_item_ret
            et_cond_prt         = lt_cond_ret
            ev_data_changed     = ld_data_changed
          EXCEPTIONS
            non_existing_handle = 1
            non_existing_item   = 2
            ipc_error           = 3.
      ENDIF.
*   Publish event afin de sauvegarder les conditions de prix
      CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
        EXPORTING
          iv_obj_name = 'PRIDOC'
          iv_guid_hi = pd_guid_dest
          iv_kind_hi = 'A'
          iv_event    = 'SAVE'
        EXCEPTIONS
          OTHERS      = 1.
*   As no order_maintain will follow implicitly and therefore no
*   exec times for the events will be set, call CRM_ORDER_MAINTAIN
*   without any parameters
*   Then the exec time 'end of document' will be set and with the
*   group logic also all exec times before
*   But at least one object is needed in input_fields
*   --> use PRIDOC
      ls_input_fields-ref_guid   = <fs_orderadm_i_dest>-guid.
      ls_input_fields-ref_kind   = 'B'.
      ls_input_fields-objectname = 'PRIDOC'.
      INSERT ls_input_fields INTO TABLE lt_input_fields.
      CLEAR ls_input_fields.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        CHANGING
          ct_input_fields   = lt_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
    ENDIF.
ENDLOOP.
" F_MODIF_CONDITION_PRIX
*& Form F_LOCK_DOCUMENT
* Verrouillage d'un document
FORM f_lock_document USING pd_guid TYPE crmt_object_guid.
CONSTANTS : lc_orderadm_h TYPE crmt_object_name VALUE 'ORDERADM_H',
              lc_orderadm_i TYPE crmt_object_name VALUE 'ORDERADM_I'.
DATA: lv_process_mode      TYPE crmt_mode,
        lv_order_initialized TYPE crmt_boolean,
        lv_process_type      TYPE crmt_process_type,
        lv_already_locked    TYPE abap_bool.
DATA: ls_admin_ui_status TYPE crmt_admin_ui_status,
        ls_item_usage_range TYPE crmt_item_usage_range.
DATA: lt_objects_to_read   TYPE crmt_object_guid_tab,
        lt_requested_objects TYPE crmt_object_name_tab,
        lt_item_usage_range TYPE crmt_item_usage_range_tab,
        lt_locked_contract   TYPE crmt_object_guid_tab.
INSERT pd_guid INTO TABLE lt_objects_to_read.
INSERT lc_orderadm_h INTO TABLE lt_requested_objects.
INSERT lc_orderadm_i INTO TABLE lt_requested_objects.
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '02'.
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
* LAM: Financing Options should be viewed in a separate screen:
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '05'.   "Financing options
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
*-> read document in change mode
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = lt_objects_to_read
      iv_mode              = 'B'
      it_requested_objects = lt_requested_objects
      it_item_usage_range = lt_item_usage_range
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      OTHERS               = 6.
PERFORM enqueue_order IN PROGRAM saplcrm_order_ow IF FOUND
    USING pd_guid
          abap_false
          abap_false
          abap_false
CHANGING sy-subrc
          lv_already_locked
          lt_locked_contract.
" F_LOCK_DOCUMENT
* Fin Ajout CD1K904074-001
FORM f_header_copy_pricing USING   pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src     TYPE prct_handle,
          ld_pd_handle_dest    TYPE prct_handle,
          lt_komv_print_src    TYPE prct_cond_print_t,
lt_komv_print_dest   TYPE prct_cond_print_t,
          ls_komv_print_dest   LIKE LINE OF lt_komv_print_dest,
          ls_komv_print_src    LIKE LINE OF lt_komv_print_src,
          lt_cond_chg          TYPE prct_cond_print_t,
          ls_cond_chg          TYPE prct_cond_print,
          ls_input_fields      TYPE crmt_input_field,
          lt_input_fields      TYPE crmt_input_field_tab.
DATA : bal_log         TYPE balloghndl,
         lt_cond_ret     TYPE prct_cond_print_t,
         ld_data_changed TYPE xfeld,
         gv_decimal      TYPE usdefaults-dcpfm.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
      iv_header_guid             = pd_guid_src
    IMPORTING
      ev_pd_handle               = ld_pd_handle_src
    EXCEPTIONS
      error_occurred             = 1
      handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
      iv_header_guid             = pd_guid_dest
    IMPORTING
      ev_pd_handle               = ld_pd_handle_dest
    EXCEPTIONS
      error_occurred             = 1
      handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_src
    IMPORTING
      et_komv_print       = lt_komv_print_src
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      OTHERS              = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_dest
    IMPORTING
et_komv_print       = lt_komv_print_dest
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      OTHERS              = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
    CLEAR: ls_cond_chg,
           ls_komv_print_dest.
    MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
    READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
    IF sy-subrc EQ 0.
      IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
        ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
        ls_cond_chg-kwert     = ls_komv_print_src-kwert.
        ls_cond_chg-kinak     = ls_komv_print_src-kinak.
        CASE gv_decimal.
          WHEN space.       "format N.NNN,NN
            REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
          WHEN 'Y'.         "format N NNN NNN,NN
            REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
        ENDCASE.
      ENDIF.
    ENDIF.
    CLEAR ls_cond_chg-krech.
    INSERT ls_cond_chg INTO TABLE lt_cond_chg.
    CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_dest
      iv_bal_log          = bal_log
      it_cond_prt         = lt_cond_chg
      iv_req_ret          = abap_true
      iv_req_cond_prt     = abap_true
    IMPORTING
      et_cond_prt         = lt_cond_ret
      ev_data_changed     = ld_data_changed
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      not_allowed         = 3
      OTHERS              = 4.
CHECK sy-subrc EQ 0.
*    *   Publish event afin de sauvegarder les conditions de prix
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
    EXPORTING
      iv_obj_name = 'PRIDOC'
      iv_guid_hi = pd_guid_dest
      iv_kind_hi = 'A'
      iv_event    = 'SAVE'
    EXCEPTIONS
      OTHERS      = 1.
*   As no order_maintain will follow implicitly and therefore no
*   exec times for the events will be set, call CRM_ORDER_MAINTAIN
*   without any parameters
*   Then the exec time 'end of document' will be set and with the
*   group logic also all exec times before
*   But at least one object is needed in input_fields
*   --> use PRIDOC
ls_input_fields-ref_guid   = pd_guid_dest.
ls_input_fields-ref_kind   = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    CHANGING
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
ENDFORM.
FORM f_header_copy_pricing USING   pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src     TYPE prct_handle,
          ld_pd_handle_dest    TYPE prct_handle,
          lt_komv_print_src    TYPE prct_cond_print_t,
lt_komv_print_dest   TYPE prct_cond_print_t,
          ls_komv_print_dest   LIKE LINE OF lt_komv_print_dest,
          ls_komv_print_src    LIKE LINE OF lt_komv_print_src,
          lt_cond_chg          TYPE prct_cond_print_t,
          ls_cond_chg          TYPE prct_cond_print,
          ls_input_fields      TYPE crmt_input_field,
          lt_input_fields      TYPE crmt_input_field_tab.
DATA : bal_log         TYPE balloghndl,
         lt_cond_ret     TYPE prct_cond_print_t,
         ld_data_changed TYPE xfeld,
         gv_decimal      TYPE usdefaults-dcpfm.
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
      iv_header_guid             = pd_guid_src
    IMPORTING
      ev_pd_handle               = ld_pd_handle_src
    EXCEPTIONS
      error_occurred             = 1
      handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
    EXPORTING
      iv_header_guid             = pd_guid_dest
    IMPORTING
      ev_pd_handle               = ld_pd_handle_dest
    EXCEPTIONS
      error_occurred             = 1
      handle_determination_error = 2
      orgdata_error              = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_src
    IMPORTING
      et_komv_print       = lt_komv_print_src
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      OTHERS              = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_dest
    IMPORTING
et_komv_print       = lt_komv_print_dest
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      OTHERS              = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
    CLEAR: ls_cond_chg,
           ls_komv_print_dest.
    MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
    READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
    IF sy-subrc EQ 0.
      IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
        ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
        ls_cond_chg-kwert     = ls_komv_print_src-kwert.
        ls_cond_chg-kinak     = ls_komv_print_src-kinak.
        CASE gv_decimal.
          WHEN space.       "format N.NNN,NN
            REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
          WHEN 'Y'.         "format N NNN NNN,NN
            REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
        ENDCASE.
      ENDIF.
    ENDIF.
    CLEAR ls_cond_chg-krech.
    INSERT ls_cond_chg INTO TABLE lt_cond_chg.
    CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
    EXPORTING
      iv_pd_handle        = ld_pd_handle_dest
      iv_bal_log          = bal_log
      it_cond_prt         = lt_cond_chg
      iv_req_ret          = abap_true
      iv_req_cond_prt     = abap_true
    IMPORTING
      et_cond_prt         = lt_cond_ret
      ev_data_changed     = ld_data_changed
    EXCEPTIONS
      non_existing_handle = 1
      ipc_error           = 2
      not_allowed         = 3
      OTHERS              = 4.
CHECK sy-subrc EQ 0.
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
    EXPORTING
      iv_obj_name = 'PRIDOC'
      iv_guid_hi = pd_guid_dest
      iv_kind_hi = 'A'
      iv_event    = 'SAVE'
    EXCEPTIONS
      OTHERS      = 1.
ls_input_fields-ref_guid   = pd_guid_dest.
ls_input_fields-ref_kind   = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    CHANGING
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.

Unable to display the pricing conditions for a product.

Hi All,
I have created a product with help of function modules.The problem is that i am able to populate the pricing conditions data into internal table,but the pricing conditions is not being displayed in the Masterdata->Products-> Maintain Products screen. Can anyone suggest me in this regards.Is there any function module to be used? or any other procedure to be followed for the pricing conditions to be dispalyed? If any sample code also please provide me.Please respond soon it is an Urgent Requirement. Points will be awarded for useful answers.
Thanks in Advance,
Shwetha.

Hi,
The pricing in SD and MM is a separate module like thing and is maintained for different products based on the Condition records.
The basic Pricing Procedure consists of Condition Types, Condition Records, Accesss Sequences and condition tables.
Generally with respect to all sales and purchase documents the pricing is maintained in KONV and KONP tables based on the different condition types.
reward points if useful
regards,
ANJI

More than one join condition for 2 tables in obiee

Hello,
I am using obiee 11g.
There are 2 tables tableA and tableB where the join condition is like (tableA.col1=tableB.col1) or (tableA.col1 is null and tableB.col1 is null)
where should i do these type of joins.
I tried putting in physcial layer->f(x) but giving error like here only columns an d opertaors are allowed.
Thanks

ok here it goes.
I have a tableA with columns col1(pk),col2 and other columns
I have tableB with columns col1(pk),col2..Only these 2 columns.
Now distinct tableA.col2 values are put in tableB.col2. For those distinct values i have put the tableB.col1 values.
Now tableA.col2 as well as tableB.col2 can be null beacuse there may be null values in tableA.col2.
Now in tableB i have added one more row which has col1 as value and col2 as null.
Now when in physical layer when i do tableA.col2=tableB.col2 i dont get the null values.
What i want is whenever the tableA.col2 and tableB.col2 is null then take tableB.col1 for those vales.
So when i query i do
select * from tableA,tableB where
((tableA.col2=tableB.col2) or (tableA.col2 is null and tableB.col2 is null))
What i want is when i do a join i should be able to give this OR condition in rpd thats it.
because when i do in where clause of content tab it goes like a AND condition and not OR.
Thanks
Edited by: user123 on Jul 5, 2011 1:57 PM

Pricing conditions for sale order create BAPI

Hi guys and gals,
i am workin on a object where i would have to create a variant of VA01 screen with pricing details , item details , shipping details etc, visible in a single screen .
What i have understood so far is that i would have to use BAPI simulate to get the pricing conditions and ATP details to display to the user before he saves the order , the issue now is when is adding new pricing conditions or changing the existing conditions on my screen i would have to update the other conditions types based on his input and i also understand that some conditions r editable and some arn't and like in regular VA01 the user should be able to delete the pricing conditions also , which means i should taken into account all this when iam finally saving this order , please guide me further in this regards
Thanks in advance

Hai
Try with the following
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Thanks & regards
Sreenivasulu P

List of Pricing conditions for a material

Hi,
How can I view the list of all pricing condition types maintained for a material. Is it possible in standard SAP?
Thanks.

Hello Raja,
Thanks for the link provided.
When I executed the report V/LD I didnu2019t get the desired results. I checked in the customization part for the selected reports I had entered are 15, 17 and 18.
In V/LC u2013 report display, I find the tables assigned to this report are 15 are 004 and 304; for report 17 tables assigned are 007, 307 and for report 18 tables assigned are 004 and 304.
My pricing procedure contains of all Z condition types with Z access seq assigned to it. We used customized tables and assigned to our Z access seq, Is it just because of not maintaining my table numbers in the particular report, I am not getting the values? Or it could be any other reason? If I developed my own report and assigned the tables which I used in the access seq do I get the results?
Please confirm.
Thanks

One pricing condition for BOM and other for individual component

Similar Messages

Maybe you are looking for