One Producer - Many Consumers - Same Message

I hope this hasn't been asked before, but every time I search I never find help for my specific problem.
I have a program that does the following. Has one incoming TCP connection. Has many outgoing TCP connections. Each connection is in a separate thread. When I receieve a new string from the incoming I want to send it to all outgoing connections.
Currently I am using a Variable that gets overwritten w/ each new incoming message. I am afraid that it will get overwritten before it is sent on all outgoing connections. So I want to use a queue. However, and this is what I see in examples all over the web, once the outgoing pops from the queue, the other ones don't have that message anymore. So how do I pop it off once all consumer threads send the message off?

Just create a separate incoming queues for each thread and allow the consumer to remove the messages.

Similar Messages

Everytime I send my husband a text or he sends me one, we get the same message instantly as a reply

everytime I send my husband a text or he sends me one, we get the same message as a reply. or if I try to send a picture to my email it sends it back to my phone. how do I fix this?

Go into settings-facetime-iphone cellular calls
Turn it off (grey)
On both devices.
Good Luck

One sender - two receivers - same Message-ID?

Hi,
I don´t know if it is possible to send a message (which is, as you know identified by its Message-ID) to two receivers where at least one receiver has to keep the Message-ID of the xi-incoming message. This is necessary because it has to be used as part of the receiver-filename.
We work with triggerfiles, which identify in which sequence the Messages have to be processed at the receiver system. If you use more than one interface determination, for each receiver an new Message-ID is generated. This is what I want to prevent.
Does anyone know if this is possible using a business process. (XI3.0 SP17)
If yes, what is it to look like? I´m thinking about one receiver and two senders (in bp-design) :).
Regards,
Thomas

Hi VJ,
I think your doubts are reasonable, as this doesn´t fit the "Exactly once"-idea of messages. As soon as the bpe picks up the Message, you got no chance to save the original Message-ID. I just designed a little process to give it a try, but it didn´t work (i. e. the two new Message-IDs appeared for the BP-outgoing messages).
Why I want to use it? This would be an addon for a more or less complex Szenario, which we cannot change without a redesign of the hole szenario ...
I think we´ll have to let the application server generate the Message twice with different receiver agreements. Sounds ugly.
Thank you for confirmation.
Best regards
Thomas
Best regards
Thomas

JMS load balancing - one queue to many consumers

Hi,
I'm sorry if this is a well known bit of knowledge; searching in the forums and googling didn't help.
Is the behaviour of Sun MQ defined for the case where many consumers will be listening to the same queue?
Experiments reveal that messages are usually delivered round-robin, but sometimes one consumer will get two messages in a row, and the other will then get two in a row; then perhaps three messages in a row for each consumer; just eyeballing, I didn't take any notes. Perhaps it's delivering randomly between the number of available consumers?
Nice to know if this is documented somewhere. I would like to set up a Sun MQ cluster (for HA) with 2-3 consumers listening on the same queue.
Best regards,
/ioj

Starting with MQ 4.1, the default delivery policy for autocreated queue is round-robin.
You can try setting consumerFlowLiimit to 1 in which single messages are delivered, one to each consumer in rotation.
Before doing this, please read the section [Adjusting Multiple-Consumer Queue Delivery |http://docs.sun.com/app/docs/doc/820-4916/aeojg?l=en&a=view] to get an overview of message delivery mechanism for multiple-consumer queues.
Hope this help!
~Phuong

As of yesterday 3/1/2015 T'bird stopped reading mail rationally on ONE of my two Windows 7 PC's and when aksed to check for new email retrieves the SAME message

no matter how many times I ask T'bird to check for new mail I get back ANOTHER copy of the same message dated 7:28am and NO MAIL received after that reaches my INBOX. On my other PC running Windows 7 only ONE copy of the 7:28am transmission arrives as does all subsequent email sent to me at this address... both PC's are protected by Avast anti-virus software. Turning the rogue PC off and on did not help nor did uploading and installing an updated version of T'bird.

Are the setup the same? same accounts, same folders, same messages, same filters same add-ons?
If that the case make a copy of the good profile and replace the bad one with that.

When I send a group txt and one of the people reply it creates a new message. How do I keep all the replies in the same message? I used to not have this problem but it started last month.

When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more

I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
Any solution ?
I'm using iOS 6.1.2 IPad 3
Regards

I have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

How many meetings can be opened by one account at the same time?

I've tried Adobe Connect trial version.
There are few questions about the product.
1.How many meetings can be opened by one account at the same time?
   I could open 9meetings at the same time using other PCs. What is the limit?
2.What is the maximum of students in a meeting?
   I'm thinking of buying monthly/Individual product.
3.The meeting never end even though host is out of it. But we want to control.
   Can host close a meeting so that all participants are out of the session?
Thanks for your attention.

This depends on your licensing.
If you are using a Named Host license, then you can open one meeting at a time. If other members of the Meeting Host group are present in a room, then it should allow you to have multiple rooms open, one for each Meeting Host licensing being used.
If you are using the Concurrent Learner license, then each meeting you join uses a different licenses, so as long as you have concurrent seats available, you can open as many rooms as you want/need.
Maximum number of attendees (students) would be your room's concurrent maximum, less your self. The monthly version of Connect offers 25 concurrent attendees in each room, so that would be 24 students and you.
The meeting does end after it is dormant (no host) for ~15 min, however you can use the End Meeting function (Meeting > End Meeting) to close the meeting and remove everyone, including yourself, from the room.

I cannot play music from my library on either my external drive or my laptop - keep getting same message "___ song (all of them) could not be used because the original file could not be found. I have tried changing the path in prefernces many times.

I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.

I think I've fixed this on my machine. If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries. In my case for some reason this contained the one which had always worked and a new one was in the main folder. I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes. It then rebuilt the library and it plays correctly. Hope it works for you.

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?

When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?

First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Same message many times to xi system

Hi all,
            i want to send same message many times to the xi system,couid anyone give me idea using any adapter and using BPM and without using bpm also..
regards
ptrao

Hi Krishna,
     Let's take an example..you are sending the file to the xi...you are placing the file in the source directory...you have the option in the sender communican channel if you do no tselect the delete option from the processing mode.The XI will keep on the poll the message according to the time interval which you mentioned in the sender adapter ( file) poll interval.
For more information you can refere the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    Hope i am clear.
   Thanks and Regards,
   Chandu.

My iPhone4 keep sent one same message to one contact number

i text one message to my friend last night and this message keep sent during whole day!!! My friend said she get the same message every 5 mins

If you're not seeing an error message on your phone, the problem is most likely on their end. They should contact their carrier.
Best of luck.

I rented to HD movies on Apple TV, biuth at the same time. I was able to watch one, butb the second says - error while laoding this content, try later - well I tried later numerous times and continuemto get same message. what is my next step??

I rented two HD movies on Apple TV, both at the same time. I was able to watch one, but the second says - "error while loading this content, try later" - well I tried later numerous times and continue to get the same message. What is my next step??

No, the film will be available for 30 days, but once you start watching it the clock will start running and it will expire after 24/48hrs (depending on location).
You said you rented on Apple TV, which has no accessible storage. When you choose to watch it starts to cache to the small flash drive, which is then flushed when you access another movie (or any other content). Everything is streamed so it will need to load each time. If you want to store any content you need to do so via computer.
Network issues can also contribute to seeing such an error. If on wifi, try ethernet. Make sure DNS is set to auto (settings - general - network). You can also see the status of your network by getting a report (istumbler, netstumbler or similar), to look for signal strength, noise, nearby networks.
Other services use adaptive streaming so they won't be much of an issue.

One Producer - Many Consumers - Same Message

Similar Messages

Maybe you are looking for