One punch-out URL for multiple PO submissions

Hi,
One of our punch-out vendor has only 1 URL for multiple countries, where end-users have to choose the country from a drop-down list and they will have different PO submission address based on country.
The problem will be I can only have 1 Vendor number when I define OCI parameters. Considering one vendor can only have 1 PO submission address, I am worried how I can deal with other countries ?
Did any body got this issue before?
Thanks.

No body knows ??

Similar Messages

  • Hide the punch out catalog for some purchasing groups

    Hi ,
    I want to hide one punch out catalog for purchasing groups . How is this possible ?
    Can we do in PPOMA_BBP , but the excluded tab is in display mode .
    Please help ...
    Thanks in advance
    Neha

    Hi,
    You can do this in PPOMA_BBP transaction. Excluded tab is in display mode because you may have added the catalog at Purchasing grp levels.
    Insteading of adding the catalogs at purchasing grp levels add the catalogs at the Purchasing Org level.
    Then all the catalogs will be inherited in below purchasing grps, there you can check exclude tab for one which you dont want in that purchasing grp.
    Hope this solves your problem.
    Thanks
    Venkatesh P

  • Can you have one icloud storage plan for multiple devices

    hi,
    i'm wondering if there is a way of consolidation various icloud storage plans into one.
    i only use my free 5gb for my 5s as i back up photos to my mac, however my wife has already upgraded her storage plan for her 5c to the £1/month.
    with the new release of backing up your entire photo library on you mac (which im keen to do) im going to need to upgrade my own account as the mac is set up for my apple id.
    i currently also pay for itunes match.
    im keen to know if there is a way we can use one large back up facility for: my 5s, the mrs's 5c, the mac, with out paying for multiple storage plans.
    im guessing the itunes match is stand alone but if i can have one payment for large storage and put everything there that would be ideal, and seem a reasonable request for most families.
    any help greatly appreciated
    thanks
    Scott

    Accounts can't be merged.

  • How to maintain One product cost collector for multiple materials and configuration setting

    Hi experts,
    my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
    I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
    please guide me in the same.
    Thanks in advance.

    Hi Shripad,
    you cannot assign same  Product cost collector to different material.
    Because you creating cost collector for material combination of material /production version,material /Bom Routing.
    so please create individual cost collector for every material.
    if you have any query kindly revert back.
    Please mark the answer as helpful if it is helpful to you.
    Because march 5 onwards scn has stopped awarding points to liked content.
    Starting now: No more points for likes on comments/replies
    Thanks & Regards
    Sandeep Kumar Praharaj

  • One instance of FCKeditor for multiple fields in a page

    How to implement only one instance of FCKeditor (one set of buttons) for multiple textareas in a page?

    Hello,
    Is that possible with the normal FCK Editor?
    I've never seen something like that on any website, but if you find such an example, I can have a look how it's done. If you see it somewhere working, we should be able to make it work in APEX as well.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://www.apex-evangelists.com/
    -- http://www.apexblogs.info/

  • Can't use JDBC URL for multiple LDAPs

    ColdFusion 8,0,1,195765 Enterprise (Trial)
    We use Oracle OID (LDAP) instead of tnsnames.ora to resolve database connection strings. This is how I specify one LDAP JDBC URL. On the CF admin page, Server Settings, Java and JVM, ColdFusion Class Path is set to C:\oracle\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar. Under Data & Services, Data Sources, create a new source. Set JDBC URL to
    jdbc:oracle:thin:@ldap://mdaoid1.mycompany.com:389/mdad2,cn=OracleContext,dc=mycompany,dc= com
    where mdaoid1 is one of the two Oracle OID servers that resolve connection strings, and mdad2 is an entry in the two OID's sync'ed to each other. That works.
    According to many sources based on Google search for "space separated LDAP URLs", I should be able to add another LDAP server separated by space. Now I append " ldap://mdaoid2.mycompany.com:389/mdad2,cn=OracleContext,dc=mycompany,dc=com" (no quotes, added to indicate leading space) to that string. Upon clicking Submit, I get
    Connection verification failed for data source: orcl10g3
    java.sql.SQLException: For input string: "389 ldap:"
    The root cause was that: java.sql.SQLException: For input string: "389 ldap:"
    (orcl10g3 is the CF data source name I'm creating) Some say I need to replace space with %20 in the double LDAP URL. With %20, I get error
    Connection verification failed for data source: orcl10g3
    java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.InvalidNameException: Invalid name: mdad2,cn=OracleContext,dc=mycompany,dc=com ldap://mdaoid2.mycompany.com:389
    The root cause was that: java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.InvalidNameException: Invalid name: mdad2,cn=OracleContext,dc=mycompany,dc=com ldap://mdaoid2.mycompany.com:389
    Question: How do I add more than one LDAP server to the JDBC URL so I can achieve failover and load balance?
    Yong Huang
    yong321 at yahoo.com

    The message above was posted by me two years ago and was brought to my attention today. Here's a short update: The network team added a load balancer mdaoid in front of, and resolved to, mdaoid1 and mdaoid2 (in round-robin fashion). The problem described in this thread is bypassed because the JDBC URL can simply use one-OID format, in which mdaoid is used as the LDAP server.

  • Generic HTTP URL For Multiple Interfaces

    Hi All,
    Please suggest on the following requirement. I am using PI 7.31 Single stack (Java only version).
    There are multiple HTTP to Proxy interfaces and each interface has different source structure.
    The requirement is --- How to utilize a single HTTP URL for all the interfaces.
    The major challenge is the source structure for all the interfaces is different.
    Kindly Suggest....
    Regards,
    Nitin...

    Hi Nitin,
    One solution is to create one sender interface (with either multiple operation of each interface or having all structure in different node and optional occurrence), then use operation specific mapping.
    refer the below example for multiple operation scenario
    Setup Multiple Operations Scenario in ESR and ID
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?overridelayout=t…
    regards,
    Harish

  • Having one iTunes music library for multiple computers via TimeCapsule

    Hi there,
    I'm just wondering how to best set-up my iTunes library. I want the library on my TimeCapsule wireless hard drive, and to be able to set this as the library for multiple computers at home. It's a waste of space to have duplicate libraries on both computers.I had this working with an earlier version of iTunes, but its not working now.
    I also want to know how I can get the wireless device to fire up simply by pressing the iTunes icon. If I do this without, iTunes says it can't find the library.
    Thanks.

    Frank, yes. Only one library of the songs and content if it's stuff from the Music Store.
    If the music is your own CD rips, then you can put all the music on a central server and have all the computers connect in on your home network.
    You do NOT set your iTunes to share their libraries, or look for shared libraries, you manually do the drag-and-drop with your networked music folder into the iTunes library window and each copy of iTunes behaves as if the network volume is it's own.
    The only shortcoming to this is if you add music with one machine, the others will NOT have the new songs added to their own library lists unless you drag and drop the songs into the iTunes library manually for each computer.
    I have enough music that I have broken down the library list into five folders, A-E, F-J, K-O, P-T, and U-Z. When I add new songs, the folders they're in will be added at the root Music Library folder level, so I can refresh the libraries with the new music THEN manually file it into one of those five correct folders.
    This is what my network library looks like:
    http://home.comcast.net/~foodandart/Network%20Library.jpg - you can see that I haven't added the Clapton, BBC, Roxy Music, etc, to the library lists for the entire house.
    The G4 frankenbeast computer in our living room, is the media server for the house and has the stereo system rigged through it and is used to rip vinyl and watch the video. I still have to refresh the libraries in my husband's laptop, and on my main internet computer, so those albums haven't been filed yet.
    Of course the caveat here is that I haven't a single item that's purchased through the Music Store and thusly locked down, since I rip my own LP's and CD's, so everything is much more flexible in how I can handle it.
    Deb.

  • One Search service application for multiple web applications in a single server

      We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one  Search service application , create a Content source for each web
    application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
       In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one  Search Service application for all web applications and using Result sources ,
    I am not getting the results. What could be the problem.

    Hi,
    One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
    Multiple SSA's will eat up RAM/CPU like a mother :)
    As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
    Thanks,
    Mikael
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • Use same URL for multiple SharePoint sites

    Hi there,
    Our requirement is to create multiple web applications in one Farm (which contains 1 Web Front End, 1 Application Server & 1 DB Server) using 80 port of Web Front End which is having single public IP.
    There are number of ways of doing this - One way is to create new domain name for each web application (like www.abc.com; www.xyz.com); another way is to create multiple sub domains in a single domain name like www.sub1.abc.com; www.sub2.abc.com, etc.
    However our requirement for URL naming convention for these web applications is "www.[Domain Name]/[Client Name]"  (like www.abc.com/client1, www.abc.com/client2, etc) 
    In SharePoint we can achieve this if we create one Parent site and others as Child site. However we don't want to us this. 
    So, is their any way where we can form URL of these web applications as "www.[Domain Name]/[Client Name]" 
    Regards,
    Adi

    Is there a reason for this?  I would think subdomains would be ideal, but just curious on the reasoning.  Also, do they need a full web application, or simply different site collections?  If you just need site collections, and assuming you
    don't have a massive number of them, you could use Managed Paths to explicitly allow a site collection immediately under the root url.  Be careful, though, Managed Paths can cause a lot of overhead after you go over 10-15 if you're hardware isn't up for
    it (I would assume you wouldn't put 10-15 web apps on the farm anyway, cause that's also not so great).
    There really isn't a way to do what you are asking for a full Web Application, only at the site collection level(which should be good from my limited understanding of your scenario)
    I am very curious why subdomains wouldn't work, though, as they can all point to the same IP and takes no additional purchasing of domains or anything.
    Christopher Webb MCM: SharePoint 2010 MCSM: SharePoint Charter MCT http://blog.christophermichaelwebb.com

  • One Open Directory server for multiple businesses?

    Hi all,
    Is it possible to have one Mac OS X server seen by client computers through different domain names?
    See, I have one server now, with name:
    server01.it.lan
    As we are managing three different companies, I'd like the users working for one particular company to see the server with that company's name:
    server01.bizA.lan
    or
    server01.bizB.lan
    ...and so on.
    And I'd want whatever service used by that user to have a path or address that refers to that name, even though it will point to the same server in the end...
    After some reading, I have different avenues available which would each require quite some reading. So I'm turning to you to narrow the field of researches.
    1. First of all, is this possible? I mean, not-too-complicated possible?
    2. Where would you recommend I spend time learning?
    - DNS aliases? AFP seems to go back to the primary name when I use an alias in Directory Access... (shows server01.it.lan/share instead of server01.bizA.lan/share)
    - Network configuration duplicates, to have more than one IP address pointing to the same machine?
    - Other ideas? I don't need/want a full walkthrough. Actually, I'd prefer to just have simple hints to direct my researches...
    Thanks,
    Fred

    Hi Leandro,
    For your requirement this document describes the TREX installation -
    [TREX with Multiple Instances|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6be60cc5cfd]
    Hope this helps,
    Reward points if helpful
    Regards,
    Shailesh Nagar

  • How to manage one wsp and dll for multiple clients in farm environment

    1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
    previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
    the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
    will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
    related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
        Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture. 
    • SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
    • Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
    • Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
    In this scenario how to manage multiple versions of same wsp solution?
    Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
    css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
    thing is, how to manage dll files for individual client?

    It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
    Bluntly i don't think a single farm can manage all your user environments.

  • How to make one album show up for multiple artists?

    I'd like some albums to show up under multiple artists in iTunes in Windows.  Say for example "The Basement Tapes" by Bob Dylan and The Band.  It would be nice to see this album under both these artists.  Or to have "Two Men With the Blues" show up under both Willie Nelson and Wynton Marsalis.  Can I do that with iTues?  If so I haven't figured out how.  It would be nice if using a delimiter such as as comma, slash of semi-colon would signify to iTunes that it should lists those songs under all artists but it doesn't.  At least commas didn't work.  Any help would be appreciated.

    iTunes doesn't have the ability to do what you want, i.e. to define multiple separated values in a field and then have the item show up when looking at a selection based on each of those values. "Bob Dylan", "The Band" and "Bob Dylan & The Band" are three distinct values that can't be linked together. Sort values can change where in a list things are displayed but shouldn't be used to attempt to merge different values as results are undefined and unpredictable.
    tt2

  • How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

    I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

    What he said. Or here is a similar approach with a picture.
    1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
    2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
    3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
    4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
    Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
    I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
    Have fun.
    Heyclown.
    Message was edited by: WizardSongs - Typhoos

  • One db and user for multiple tablespaces or schemas per server?

    Hello again.
    I installed Oracle 11g on server_1 and created one database db_1.
    Using Enterprise Manager, I did the following:
    Created a tablespace myname_1.
    Created a user myname_1.
    Logged in as myname_1 and created a table into the default tablespace myname_1.
    When creating this table, the schema field defaulted to myname_1.
    Created another tablespace myname_2.
    My confusion about the relationship between tablespaces, users, and schemas starts here:
    When I try to create a new table for tablespace myname_2, I get an error:
    "user myname_2 does not exist"
    I am seeking some clarification on these levels of organization in Oracle.
    My goal is to setup my server with one database each and one user each per database.
    Then, I think I want to create multiple tablespaces and organize objects per tablespace.
    Or should it be per schema?
    Eventually each tablespace will be moved to a separate server.
    Any comments and suggestions are greatly appreciated.
    Thank you for helping.

    Hello,
    This error means user MYNAME_2 doesn't exists and you have to create one.
    Example 1:
    CREATE USER MYNAME_2
      IDENTIFIED BY "my_password"
      DEFAULT TABLESPACE MYNAME_1
      TEMPORARY TABLESPACE TEMP
      PROFILE DEFAULT
      ACCOUNT UNLOCK;
      -- 4 Roles for KLONDIKE
       GRANT RESOURCE TO MYNAME_2; ---> This privs give unlimited quota on all the tablespaces
      GRANT CONNECT TO MYNAME_2;
      ALTER USER MYNAME_2 DEFAULT ROLE NONE;
    Then create your table (you were missing "AS" )
    create table myname_2.mytable_1 as
    select * from source_table@dblink_2;Example 2: If you want to create table mytable_1 in tablespace myname_2 then you have to create tablespace myname_2 first. To create table in different tablespace than user default tablespace
    create table mytable_1 tablespace myname_2 as select * from source_table@dblink;Regards
    OrionNet

Maybe you are looking for