One swf plays on web server, another does not

I have a little .swf file (created from video via
the Flash encoder) here: www.arveson.com/expt/flash/page1.htm and
it does not play on the remote server, but it plays locally. I have
placed an Adobe sample Flash file in the same location, called by
page2.htm. It plays fine. Why can't my file play? You can check the
source code in the URL.

You need another software to decompile. I use Sothink SWF
Decompiler (
http://www.sothink.com )
Be careful if you want to decompile, though. This is a very
debated practice among developers. Many people think that to do
this is to steal someones intellectual capital (IE all of the time
and effort they put into programming the swf). I believe that
communities can only move forward by being open about their
methods. I gladly give anyone who asks a copy of any source code I
develop that they want to learn from, and I gladly decompile swfs
to help people solve their problems. I typically ask permission if
I am decompiling to figure out how they did something for my own
benefit.
@Lucho16, I am not sure exactly what your problem may be from
your description. Perhaps with a link, or some source code, I could
discern more information.

Similar Messages

  • HP Photosmart 7520 e-All-in-One Embedded Web Server (EWS) Does Not Respond

    My new (as of 3/14/2014) 7520 is connected (wirelessly) to an all-Apple wireless network. with four computers (and, at times, two iPhones) sharing that network.  
    While I can print to the 7520 and also scan from it, I cannot access the 7520's Embedded Web Server, no matter what I try. 
    I have located the 7520's IP address on its display and entered it into the Safari web browser's address field as 192.168.1.7 (with the usual http colon slash slash prefix, of course).    When I hit return, the browser's progress bar appears and then stalls.  After 30 seconds, the progress bar disappears and nothing else happens.  
    While trying to find what might be causing this problem, I have also…
    • disabled the network's (and my computers') firewalls, 
    • used the 7520's Bonjour address, 
    • tried both addresses using Safari on …
         - a MacBook running OSX 10.6 (Snow Leopard), 
         - a MacBook Pro running OSX 10.7 (Lion), 
         - a MacBook Pro running OSX 10.8 (Mountain Lion), 
         - a Mac mini running OSX 10.9 (Mavericks), and 
         - an iPhone 4 running iOS 7.1
         - an iPhone 5 running iOS 7.1
    • made sure I was using the latest version of the printer driver software and HP Utility, and 
    • used the HP Utility to attempt to access EWS, 
    …all without success -- that is, on the laptops, nothing is displayed.  On the iPhones, Safari reports that it "could not open the page because the server stopped responding."  
    Furthermore, although I can turn on and connect to the 7520's Direct Wireless wi-fi channel with my laptops and iPhones, typing the address for the EWS (specified in the printed Network report as http://192/168.223.1) in the browser and pressing Enter again yields the same result.  
    I had all these problems with a 7520 I bought from a local computer store.  I contacted HP Tech support by chat, spent 4 hours walking through resets and other tests with them, and they decided to send me a new 7520.  I have sent back the first 7520, installed the new one, and the problems persist with the replacement 7520!  
    What do you think might be wrong here?  Do you have any advise or trouble-shooting guidance?  

    Okay… I did as you advised — as best as I could, that is… the link you posted yielded a page marked "HP was unable to find the page you wanted."
    In any case, I changed the DHCP range to 192.168.1.100 thru 150.
    Using the following procedure, I believe I set the 7520 to the static address 192.168.1.10 (using the 7520's control panel, from the home screen)…
      • Tapped the radio (wireless) icon, second from the left on the top bar of the screen.
      • Tapped "Settings" button, lower-left screen.
      • Tapped "Advanced Settings" bar (second fom bottom).
      • Tapped "IP Address" bar (at top).
      • Entered "192.168.001.010" in the IP address field.  
      • Pressed the home button icon to the upper left of the display.
      • Tapped the wireless icon in the top bar again and confirmed that the IP address had been changed to … .10
    With that done, I tried 
         http://192.168.1.10/
    in the browser of a couple of my computers (OS X Lion MacBook Pro, OS X Mountain Lion MacBook Pro).  
    Still no joy.  
    In case you don't alread know, Airport base stations can be set to reserve specific IP addresses for static IP devices or services.  I reserve an IP address for testing database and OS X servers on my network (for clients).  You can reserve as many such IP addresses as you like in the "Network" tab of a base station (using Airport Utility) as shown here…  
    Based on your advice, I have reserved the … .10 address, as you can see.  Hope this is useful to you.

  • Compact web-server which does not require installation

    Hello,
    My application is written in Flash and I'm looking for a compact web-server for Mac OS 10.5+, which would be able to run it from a CD without any installation to user's computer.
    Does anyone know a solution?
    Free software is preferred. Crossplatform: Macintosh + Windows would be the best.
    Thank you.
    Best regards,
    Vadim Lazuko

    I haven't found how Mongrel could be run without installation on target computer.
    Could you, please, point me the solution for that?

  • HT201335 I just installed my apple tv set it to mirroring and it worked perfect.  one hour later it will play audio but the picture does not come up on the screen to mirror my ipad.

    I just installed my apple tv and set it to mirroring and it worked perfect.  One hour later it will will only play audio on mirror, it does not show the screen image of the ipad on the tv.

    restart ipad, appletv and wifi router

  • Input field in Web Dynpro ALV does not have correct focus

    Hello Friends,
    Our client's SAP system is recently upgraded with ECC 6.0 SP 18.
    After that the focus in the editable field of Web Dynpro ALV does not working properly by down arrow navigation.
    The common scenario:
    The ALV has more than one rows and one column is editable...
    when user is selecting field of first row and making some entries...
    after that pressing down arrow it is going to next row and coloring the field like focusing...
    but the 'cursor' is not blinking so user can not make entry without clicking by mouse...
    this was working Ok before upgrade...
    Could you please anyone have a look and propose a suitable solution?
    Thanks
    Krish

    Hello,
    The problem was with Javascript....which play an important role in layout of web dynpro ALV...
    which resides in MIME repository -> SAP ->PUBLIC - >BC ->NW5 ->JS ->SAPURI_Ie6....
    We wrote to SAP for giving us the fix...
    after we got a new file from SAP the problem is solved...
    also we have to clear server cache through SMICM and client cache...
    Thanks.
    K.

  • How do i delploy on hosted server which does not support crystal. Is RAS ?

    have to put a solution on a public hosted server. it does not support crystal . cannot add to GAC
    if i use RAS(or cr 2008 server) on another server . Web app works on public server but points to my RAS server. Do I still need components on the public server. if I do this will not work,
    any ideas
    John

    many thanks. there is some tendancy to cloud hosts. all you get is ftp access and .net ompersonation.
    just drop the webisite in. so no MSI use which also rules out merged modules
    thanks
    john

  • How does one go about authenticating so that getRemoteUser() does not retur

    Any Help Please
    How does one go about authenticating so that getRemoteUser() does not return null?
    am using oracle application server 10g R3 and i already modify wy web.xml but its not working also
    thanks
    thanks

    Hello,
    Easiest would be to get an External Hard Drive & clone eerything asap, you can even boot/run from the external, & Firewire would be far faster than USB.
    Even if you replace the Internal, you'll need an externsal to clone to first.
    http://eshop.macsales.com/search/firewire+drives
    Many of those come with Backup SW, or...
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Here's the steps to replace the Internal Drive...
    http://www.ifixit.com/Guide/Installing-iMac-Intel-24-Inch-EMC-2111-Hard-Drive-Re placement/5211/1

  • The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

    Hi,
    I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
    When i try to enroll a permanent smart card for a user, its shows me the following error:-
    The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
    Also there is no logging done for the particular event.
    I am able to change my smart card pin and view my smart card info. through the FIM CM client. 
    Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
    Thanks

    Hi,
    Sorry for the delay in reply.
    Please try the following steps first:
    Open Powershell as Administrator
    Go to Start--> Run and type wbemtest.exe.
    •Click Connect. 
    •In the namespace text box type "root" (without quotes).
    •Click Connect.
    •Click Enum Instances…
    •In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
    •In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
    •In the Object Editor window, double-click HandlesPerHost.
    •In the Value dialog, type in 8192
    •Click Save Property.
    •Click Save Object.
    Under properties find the property "MemoryPerHost" or any other ones you need to modify  and double click it
    Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
    Click Save Property
    Click Save Object.
    •Close Wbemtest.
    •Restart the computer.
    And if all nodes are Windows server 2012, install the following update rollup as well:
    Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
    http://support.microsoft.com/KB/2862768
    If you have any feedback on our support, please send to [email protected]

  • ERROR: Web Dynpro component does not exist

    Hi!
    Trying to open different menu items in PPM I get browser with error:
    500 SAP Internal Server Error
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE).
    Url looks like: someurl.com:8010/sap/bc/webdynpro/sap/inm_workcenter_app?IV_APPL_TYPE=RPM&IV_OBJ_TYPE_R=RPH&IV_POR…
    How can I fix it?

    Hi Maxim,
    Refer the SAP note in the below thread.
    ERROR: Web Dynpro component does not exist (termination: RABAX_STATE)
    Regards,
    Ravi

  • Erorr  " The Web template "0ANALYZER" does not exist in the master system "

    Hi
    i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
    "The Web template "0ANALYZER" does not exist in the master system "
    i activated all templates but not able to execute any report in web
    i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
    please do help me

    For clarification:
    If following happens:
    > you are launching the query with URL like:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
    > then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
    --> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
    --> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
    When you problem is other nature you have to describe it in detail.
    Regards, Karol

  • Apache Web Server Listener is not running

    Hi,
    when starting E_BUSINESS issuing this
    adstrtal.sh apps/apps
    , I have this error message :
    Apache Web Server Listener is not running.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    Apache Web Server Listener (PLSQL) is not running.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    What might be the problem ? How can I launch Apache Web Server Listener to see why it can not start and where to see it's log file ?
    Many thanks

    hsawwan,
    I stopped all services, and killed process that were using port 8103. Then restarted all. In jserv.log we have
    [09/11/2007 15:36:27:798 CET] Host os02ebsx.ourdomain.net not found and not allowed to connect
    [09/11/2007 15:37:29:146 CET] Repository /Data/oracle/d03/prdacomn/java/apps.zip doesn't exist!
    [09/11/2007 15:37:29:178 CET] oracle.apps.icx.common.InitSystemProperties: init
    [09/11/2007 15:37:29:233 CET] oracle.apps.fnd.tcf.SocketServer: init
    [09/11/2007 15:37:29:247 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: init
    [09/11/2007 15:37:30:005 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: Sucessfully initialize oaosu.OAMServlet
    [09/11/2007 15:37:30:156 CET] oracle.apps.mwa.wap.engine.WapServlet: init
    [09/11/2007 15:37:30:156 CET] oracle.apps.mwa = /Data/oracle/d03/prdaappl/mwa/11.5.0
    [09/11/2007 15:37:33:271 CET] Fatal error in parsing device registration file. See system log file for de-tails.
    but in Context.xml file we do not have os02ebsx.ourdomain.net. Where does java server pick up this host ?
    Thanks and regards.

  • Web server connectors did not install

    Newbie. I am trying to install the developer edition of
    Coldfusion on my Intel-based MacBook Pro. In the set-up wizard I
    click ‘Developer Edition’, ‘Server
    Configuration’ and ‘Built-in webserver’.
    This is the error message I have been getting:
    “You have successfully completed the first step in
    installing Macromedia Coldfusion MX7”
    However, the ColdFusion service does not appear to be
    running, the web server connectors did not install successfully,
    and the web server and/or website could not bve reached on port 80.
    Possible reasons include the ColdFusion service failing to start,
    blocked 2920 or 51011 ports, or the web server and/or website is
    not running or is not configured to listen on port 80 (in which
    case this is not an error).
    Please complete the following steps to complete the
    installation:
    1) Consult the Installation Guide on how to manually
    configure the web server connecttor,
    2) Ensure any firewall software blocking ports 2920 or 51011
    is disabled,
    3) Ensure the ColdFusion service is started,
    4) Manually configure your web server connectors,
    5) Confirm you web server and websites are started, and
    6) Continure your installatino by logging in to the
    Configuration wizard at
    http://localhost:8500/CFIDE/administrator/index.cfm”
    I cannot find an Installation Guide. Have switched off the
    firewall in the ‘Sharing’ folder in the System
    Preferences. Don’t know how I would manually configure web
    server connectors and can find nothing in the Macromedia support
    website.
    What can I do? I am very keen to learn and use Coldfusion.
    Any help greatly apprecitated.

    You should be able to find what you're looking for here:
    http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/js/html/wwhelp.htm

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

Maybe you are looking for

  • Can't get Justify text to work in Illustrator CS4

    Hi When I open the Paragraph panel, I can make text left align, right, center, but no matter what Justify setting I click, my text just jumps to right aligninment. How do I make it work? Cheers Shaun

  • Marketing Fonts in Document

    Marketing wants to send out .pdf documents that have company specific fonts in them. If I try to do that in .pdf, the fonts will not be viewable by our intended customers. Is there a way to embed the font in the document such that it is viewable by t

  • Re-installing Mac OSX Tiger

    I am trying to get to the root of some kernel panics that I am experiencing. In dont think I have a heating, hardware, RAM, or logic board issue but I am not sure. Ran the applecare repair CD hardware test for 3 hours and it could not find a problem.

  • ItemEditEnd not triggered when Mousing out of a grid instead of tab

    The title says it all.  If the user tabs out of an editable grid cell, life is good, the itemEditEnd is triggered, however, if the user changes the value in the cell, then clicks with the mouse on a different control, the function is not called.  How

  • Panels Keep Minimizing Themselves (Ps CS4, Win7)

    I'm using Photoshop CS4 on Windows 7 at work and every time I minimize or close Photoshop and then maximize/re-open, my Swatches and Layers panels are minimized. My workspace is saved, and I've tried resaving it (including panel locations, shortcuts