One username and password not being added to keychain

I have entered a username and password for a webpage and answered yes when asked it I wanted this saved it to my keychain.
However I can not find the u/n and pass word in my keychain (Safari>Preferences>Passwords) and this u/n and pw is not shared with my other devices. All my other u/n and pw are in my keychain and are shared with all my other devices.
Can I manually add a u/n and pw to my keychain?

Hi Matt,
I did previously have "Private Browsing" selected and deselected that and that is when I could set up FF with my username and pw but could not on Wells Fargo. So, I did what you suggested and that was to delete cookies because that seemed like a good reason but alas, it still will not give me the option to set up the username/pw.
I would not be surprised if it is Wells Fargo, they are a bit of a pain. You cannot even save them in Bookmarks because I was told they are constantly making changes to their site and this stops the bookmark from working.

Similar Messages

Username and Password Not Being Saved

The option to save my username and pw is not coming up on my banking site, Wells Fargo. I get the option on other sites, I just set up FF.
Also, does FF have a Key Logger Security option?

Hi Matt,
I did previously have "Private Browsing" selected and deselected that and that is when I could set up FF with my username and pw but could not on Wells Fargo. So, I did what you suggested and that was to delete cookies because that seemed like a good reason but alas, it still will not give me the option to set up the username/pw.
I would not be surprised if it is Wells Fargo, they are a bit of a pain. You cannot even save them in Bookmarks because I was told they are constantly making changes to their site and this stops the bookmark from working.

Username and password are being requested by

I can't open my firefox browser. An authentication required message pops up saying- a username and password are being requested by https://proxyvip.econ.mpg.de:444. The site says "Radius" - What do I do to get firefox working again? i can't do anything with it

You can check if you can start Firefox in [[Safe Mode|Safe Mode]] by holding down the Shift/Options key.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See if you can use the Profile Manager to start Firefox in Offline mode.
*http://kb.mozillazine.org/Profile_Manager
Try to start Firefox with the about:blank page by creating a copy of the current Firefox desktop shortcut and add a space and -url "about:blank" to the target/command field.
If that allows to start Firefox then check the connection settings.
*Firefox > Preferences > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Gmail Error: Username and Password Not Accepted?

Okay, once in a while my e-mail actually works on my I phone but about 90% of the time I get this notification; Cannot Get Mail: Username and password not accepted. Does anyone else have this problem or know how to fix it? Oh yeah, I'm using 1.0.2, gmail, and I'm positive my password and username is right.
Message was edited by: one11archerave

I think the problem is solved. Last night I was on my friends computer and I accidentally stored my gmail password. I couldn't figure out how to delete it so I changed my password and then updated my iPhone with the new password. Ever since then I haven't had any problems.

Hi . username and password not save in firefox 7.0.1 . please fix it.

hi . username and password not save in firefox 7.0.1 . please fix it.

This is why I'm losing my patience with Firefox. Every few weeks there's another update; which usually auto installs without asking permission. Then I have to go around and find and fix those things that worked in the previous version. Can't you guys do like Apple does and notify us that there's an update, tell us what the changes are and let us decide whether or not we can download and use it? Until this is fixed, I have gone back to version 6.0 and will stay there (unless it auto updates) until you guys get a better way to communicate. If nothing happens, I will go look for another browser...not IE...maybe Chrome or some other.

Usernames and passwords not saved

I have followed all of the suggestions and usernames and passwords are not saved. This feature did work until I install Firefox 4 and still with Firefox 5.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords
*https://support.mozilla.com/kb/Username+and+password+not+remembered

Username and password not automatically filled in

The problem I have with Firefox is that when I log in to one of my email services (I use two different ones).
In the past when I opened the log-in page my login and password (saved in FF) were already filled in so I just had to click "log in" button - it still is that way on the other email service. I had it set up this way for years, since many FF versions back (I have automatic updates on in FF so it is always up to date). Recently I was changing my passwords and I got confused when updating saved password so I decided to delete saved passwords for one of the email services and just logged in typing the password in manually and clicked 'save password' when FF password manager asked me. From that point on when I open the log in page from my bookmarks, the details are not there anymore, so I have to click on 'username' field to get the autocomplete list, choose my login name (there is only one) and then the password gets filled in and I can log in, so it's not the issue of password not being saved or filled in for my login but the fact that these details are not filled in from the point I open the login page from bookmarks, like it used to be and like it still is with the other service (for which I didn't delete and re-save password).. Now this might not be a big deal you might think but it is really annoying that I have to do extra step just to log in to my email especially that I log in to it frequently during the day and that I like things to work the way they are supposed to.
I have tried removing cookies for that website, deleting and re-saving the bookmark (with fields already filled with details), deleting all saved password for that website and saving it again and nothing seemed to help.
I will appreciate any help if anyone has the solution. Please do not suggest alternatives like using add-ons or using email client etc.
Not sure links are allowed but this is the link to the screenshot showing and describing the problem:
http://screencast.com/t/TKWVVogzmqI
I'm on win 7 pro 64, latest Mozilla 29.0.1

OK. I tested it with the name and password in the bug report.
This looks like a problem with the submit URL.
The form uses a submit URL action="/login.html"
<pre><nowiki><form action="/login.html" method="post" name="login" id="loginForm"></nowiki></pre>
There runs a script that changes this to a secure version
<pre>loginForm = $('#loginForm').attr('action', 'https://profil.wp.pl/login.html'),
</pre>
That makes the Password Manager not working properly.
It should work if you open the login page via a secure connection https://profil.wp.pl/login.html
You can also use the Saved Password Editor extension to edit the form and modify the submit URL to use http://profil.wp.pl to make the Password Manager work.
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

How do I save more than one username and password for a site?

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/918629]]</blockquote>
I manage two online calendar accounts under one website (both account admin centers actually have their own URL but the main root of the webpage is the same). My "user ID" (which is my e-mail address) is the same for both accounts.
Firefox used to associate the user ID and password with the ENTIRE URL so, in effect, it would remember them for BOTH admin centers. Now it seems to only remember the main root webpage (www.samplepage.com instead of www.samplepage.com/adminloginA).
How do I get it to remember the ENTIRE URL instead of just the root? I need it to remember both usernames and passwords.
Thanks!

That is not possible with the Firefox password manager. You can only save a user name and its password once for a specific domain, so if the name is the same then it doesn't work.

How do I save more than one username and password for one website?

First, let me say that I'm extremely irritated that I just spent 15 minutes writing a very detailed question and researching my OS, browser version, etc. only to have it all erased because I didn't "verify" my e-mail before I started typing my question. Firefox: please fix your sign-up and question posting process so this doesn't happen. It should retain your info for a smooth process after you verify. What a waste of time and effort when I'm already frustrated.
ACTUAL QUESTION: I manage two online calendars under one root URL (www.samplepage.com/calendar1 and www.samplepage.com/calendar2). My e-mail address is the user ID for both accounts but the passwords are different.
FF used to associate your username and password with the ENTIRE URL but now it only associates with the root (www.samplepage.com). So, for me, it will only remember one password.
How can I get it to remember BOTH passwords?
Thanks!

That is not possible with the Firefox password manager. You can only save a user name and its password once for a specific domain, so if the name is the same then it doesn't work.

Lpadmin - request for username and password - not responding correctly

Recently updated to a new computer and 10.5.7.
A printer was paused (somehow). Tried to resume printing and got a request for an lpadmin administrator user name and password. Mine is the only account on this computer. Put in my user name and password, but this was rejected. If I tried 3 times I was told to try later (and given my password hint). However, after clicking OK to this dialogue the action WAS taken.
Same thing happened when I tried to add a printer. It will not accept my username and password, but if I persist until I get the message to try again later, the printer WAS added.
So, I am back to having a printer, but this seems like a bug.
Steve

see this link
http://support.apple.com/kb/TS2754

ILM assistant XDB username and password not working

Hi All,
Hi I'm using ILM 1.3 with Oracle 11g on HP.
I am able to log-in to apex server but not ILM assistant.
http://dblxamd02.vxindia.veritas.com:8080/apex/apex_admin it works with admin/oracle.
But im not able to login to http://dblxamd02.vxindia.veritas.com:8080 when it asks for XDB username and password.
I tried to reset the password using apxxepwd.sql but not luck.
Did anybody observer this issue ? if so can somebody please reply me ASAP ?
Thanks in advance.

There are two wats to install the ILM toolkit:
1) Directly on the server where your instance is located. In this case you do not need to provide a TNS connection name. Therefore, you would execute the script as follows:
@ilma_install.sql pune
2) Remotely from a client. In this case you do need to provide a connection string to your remote database instance. Therefore, you would execute the script as follows:
@ilma_install.sql pune@11
in this scenario the connection details are derived from your TNSNAMES.ORA file. If you have multiple Oracle products installed you have multiple copies of this file and it can be difficult to track down which file is being used. To point to a specific TNSNAMES.ORA I normally set three parameters:
ORACLE_HOME - points to your 11g Client installation directory
PATH - point this to the Oracle home containing SQLPlus, usually this is ORACLE_HOME/bin
TNS_ADMIN = ORACLE_HOME/network/admin
then make sure the TNSNAMES.ORA contains a reference to your identifier "11". You can test the connection by using the TNSPING utility that is part of the 11g client installation. The format for your instance would be:
TNSPING 11
this will tell you if you can connect to your instance. If there are any issues check the connection via the Net Configuration Assistant, or you can edit the TNSNAMES.ORA file directly via Notepad.
Hope this helps
Keith

SSH local database username and password not working

I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
Site-ASA# sh run | in ssh
aaa authentication ssh console SERVER_RADIUS LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
ssh version 2
Site-ASA# sh run | in aaa
aaa-server SERVER_RADIUS protocol radius
aaa-server SERVER_RADIUS (inside) host 10.0.0.6
aaa authentication ssh console SERVER_RADIUS LOCAL
aaa authentication http console SERVER_RADIUS LOCAL
Site-ASA#
If there are any other config that would help I would be more than happy to display them
Thanks!

Thanks for the reply. I was just coming in to update this because you are exactly correct. For some reason I kept thinking that if the authentication failed via RADIUS it would use local which is not the case.
Problem (or no problem) resolved.

Admin username and password not recognized for upgrade

I'm trying to upgrade a user account on my computer to Yosemite. This is that not the admin account. My admin username and password are rejected. It is also rejected when I try to do something such as change the power settings. If I'm doing this within my admin account the same username and password work just fine. I have no idea how to fix this.

One more follow up question. I logged back into my admin account to upgrade to Yosemite. The software was already downloaded in the user account using the apple ID and PW associated with that account, which is different than the apple ID associated with the admin account.
Within my admin account, on the first page of the app store app it shows OSX Yosemite as 'downloaded' and nothing happens when I click that button.
The only other option is to click 'learn more' under the OSX Yosemite image. From that page it asks me to sign in to the App store to download Yosemite. The Apple ID box already contains the other Apple ID (not the one I want to use), and there is no option to change that. All I can do is enter that password.
I'd like to complete this with my Apple ID but I don't know how to change it.

AirPort Base Station disk username and password not working

I got a new AirPort Base Station the other day and everything worked fine until I started to set up the networked disk. On my mac it works fine, it just pops up when I connect to the network ( woot for macs ). On my windows it asks for the username and password. After I enter it it comes up with "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator." I have tried to log into the disk on 2 other computers running windows xp with the same problem. What is wrong with it and how do I fix it?

Specifically, I had the typical problem connecting when using Windows Live OneCare, despite allowing AirPort Disk Agent in its firewall pop-up.
This is the procedure which unlocked access via AirPort Disk Agent:
Double Click Windows Live OneCare icon in system tray. Or use your own means to get its main window open.
Click the "Change OneCare Settings" topic listed along the left edge column. This will open a new dialog box.
Click the "Firewall" tab of this new dialog box.
Click the "Firewall connection tool" button shown right under the protection level slider. This will open yet another dialog box.
At the top of the list in this "Set up connections" dialog box will be a checkbox (probably unchecked) next to the words "Network Discovery: Browse your network to find printers, computers and other devices."
CHECK THAT BOX.
Close all the dialog boxes using an OK button where available, else the usual [X].
Left-click the AirPort Disk Agent icon in your system tray. From the menu that pops up, select the disk you were having trouble with. Enter its password (the one you know works from a Mac, if appropriate).
After a delay, your "My Computer" window should show a new drive. If you have window settings appropriate to this display, the drive should appear under the "Network Drives" category. In my case, it became drive Z:.

One username and password not being added to keychain

Similar Messages

Maybe you are looking for