One works, one does not.... Different Profile Question....

I am using Windows Vista. When I am on one profile, I keep getting an error that says that "ITUNES HAS STOPPED WORKING". Then it reports a problem in windows and checks to see if a solution is available. Just for giggles and after alot of frustration with it, I created a new profile. In the new profile, Itunes Works Perfectly. In the other profile I could only use anything below 7.0. 7.0 and above works on the other profile just fine. I dont really want to move everything of mine over to the other profile. But if I delete the other profile and use the new one this is what I will have to do. But I am trying to find out what is causing it to work on one and not the other? It seems that if it was anything like a conflict in windows, the problem would persist on both sides. What is wrong?!?!?!?!?

Never answered, nobody responded.

Similar Messages

Asking the Bridge Team: Bridge "working color space" setting when one does not have the Suite?

Common sense tells me there is really no such thing as a
"working color space" in Bridge, because
Bridge is not an image editor, just a browser
Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
Is there a way to set the Bridge
"color settings" when one does not have the suite?
The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
(not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
But what if I wanted Bridge to assume my
Photoshop color working space for untagged images
so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
there is really no such thing as a
"working color space" in Bridge, because Bridge is not an image editor, just a browser.
Thanks in advance.

Hi Ramón,
Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
How do I report this to the Colour Police at Adobe?!?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

Iphone Webclips Icon Problem (One works, one does not)

I have two websites with two different hosts. One is Teamkong.net and the webclip I created works fine. The other one is d2football.com and the webclip does not work. I did them the same, put them in the same place and one works and the other one does not. Has to be a server setting or something, right? Suggestions are appreciated.
Here is the instructions I followed do the process:
http://vjarmy.com/archives/2008/01/h...clip_icons.php

that link doesn't work, so cannot really tell you.
But can say this you should have a reference to it in page and not rely on it just finding it by name as icons such as it and favicons for browsers, rely on finding them at the root...and your provider may be giving you a URL that makes it look like you are at your own root, but in reality you are on a shared server with other sites all subsites off a real root thus cannot be found.
So add a reference to it to your pages like this
<link rel="apple-touch-icon" href="/traffic.png"/>
Add that to your head section and replace the name of the file.
Can see it working at one of my simple webapps for traffic cameras where I live at http://vcreations.net/traffic/
Doing it at the page level also allows you to control a bit more each page if you want.

I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Need help.

I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Anyone knows what this may be?

The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one.

Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

Hi there @Past77
Welcome to the forums
I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes to you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

2 MP4 Videos one plays one does not

I have two MP4 Videos one playes and one does not. Both are h.264 Baseline profile, Level 3, AAC 2 channel audio
Every transcode of the movie that will not play fails also. Any help on h.264 setting that Media Manager will take.

I have two MP4 Videos one playes and one does not. Both are h.264 Baseline profile, Level 3, AAC 2 channel audio
Every transcode of the movie that will not play fails also. Any help on h.264 setting that Media Manager will take.

It does not cover my question about in what order does the sync work?

It does not cover my question about in what order does the sync work?
Does the first signed on computer copy its information to the cloud?
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
What happens to the information on the second device that is not in the cloud?
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device?
What are the keys to the different types of information?

Hi I have answered you questions inline below:
Does the first signed on computer copy its information to the cloud?
Yes when you first set up the account or when you first add a device to the cloud, if it is not the first time, it will merge with the other data
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
By default it merges. There is no option to change this.
What happens to the information on the second device that is not in the cloud?
It will sync at the next sync interval if that data is selected to sync.
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device? What are the keys to the different types of information?
It resolved the entry the next time the first and second device syncs. Can you elaborate on the second part of this question?

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
This question was solved.
View Solution.

Hi,
Is the printer connected to your PC by USB or network?
By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you may find listed within the About network scanning section below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line.

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line::::::::::::
Yes, there are so many pages on-line that -- when made small enough to fit within the margins so one does no have to use a scroll bar on EVERY line, moving it back and forth, back and forth -- look like a FINE-print Bible page (!! tiny !!) if you keep reducing it to fit within the margins.
ALL because we cannot find a place to tell it to WRAP to FIT. Could have sworn I've seen some feature like that somewhere at one time, but if it is here, I cannot find it.
Thank you.
gina

Maybe use a style.
Add code to userContent.css
* http://kb.mozillazine.org/userContent.css
<pre><nowiki>body, body *{ white-space:pre-wrap!important; word-wrap:break-word; }
</nowiki></pre>
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
* http://kb.mozillazine.org/Editing_configuration

The work book does not exist in the document store

Hi Forum,
Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Unable to work, CC does not respond

Unable to work, CC does not respond
Message to launch photoshop or indesign:
Error
There Was an error with this action. Try again later.
e76a857c-681f-4146-b539-161a9832373c
I work on Mac 10.9
thank you

Looks like toad is right. A quick google search on "does not have any corresponding BIOS drive" shows a load of entries going back to 2006. The ones I looked at are same error as you report, and the fix sounds exactly what toad said:
The first Google result was -
http://www.cyberciti.biz/faq/error-devhdx-does-not-have-any-corresponding-bios-drive-and-solution/
Which basically says to do this -
# grub-install --recheck /dev/sda
You did mention recheck in your post. I then read the post again:
> boot arch iso
> mount /dev/sda2 /mnt
> cd /mnt
> mount -t proc proc proc/
> mount -t sysfs sys sys/
> mount -o bind /dev dev/
> chroot /mnt
> grub-install /dev/sda
and you are mounting /dev/sda2 to /mnt but trying to install grub to /dev/sda.
I can't say for sure that's wrong but surely sda2 wont mount to /dev/sda? I may be miles off here admittedly. I can't remember offhand how mount works.
Last edited by RichAustin (2011-09-05 13:38:31)

USB Drives works, but does not show up in "Safely Remove Hardware"

USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

hi
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello takpesar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

One works, one does not.... Different Profile Question....

Similar Messages

Maybe you are looking for