Report server parameter not calling the right url

Hi,
I installed a Oracle 10g application server on windows 2003 server. there were not customization being made yet.
I run my form, click to call a report and it shows the parameter form nicely.
at this point, the url shows http://www.mydomain.com:7777/reportbla-bla-bla
After selecting my parameters, i click submit and the system shows web page cannot display.
at this point, the url shows http://myserverpcname:7777/reportbla-bla-bla
Can someone please tell me what should I do to set for the report parameter to call the right url?
Thanks

I found the solution already... the setting is to be done at httpd.conf file

Similar Messages

Online Report Server did not send the report data. (Error: BAW 0059)

Can someone confirm me if we can create an e-mail publication for promt based reports? I was created publications for non-prompt based report and they were successful. But when I create a publiction for an report which has prompt I am gettign the error - Online Report Server did not send the report data. (Error: BAW 0059). Any ideas?
--Nivas

I forgot to mention the envionment, which is 6.5.1

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

JSP does not call the right method in controller class

Hi all,
I have a jsp file which loads a page at this address: http://localhost:8080/dir/list/
I've added two checkboxes to the page; user can check both checkboxes, only one or none. Following is code I have in jsp file:
<form class="checkboxForm">
<c:choose>
<c:when test='${newItems==true}'>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2" checked="checked" /><strong> New Businesses   </strong>
</c:when>
<c:otherwise>
<input id="newItems" type="checkbox" value="#" name="newItems" class="checkbox2"/><strong> New Businesses   </strong>
</c:otherwise>
</c:choose>
<c:choose>
<c:when test='${rejectedItems==true}'>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3" checked="checked"/><strong> Rejected Businesses   </strong>
</c:when>
<c:otherwise>
<input id="rejectedItems" type="checkbox" value="#" name="rejectedItems" class="checkbox3"/><strong> Rejected Businesses   </strong>
</c:otherwise>
</c:choose>
<a href="#" onclick="apply();">
<button name="apply" class="btn-primary" value="Apply" tabindex="4">Apply</button>
</a>
</form>
<script type="text/javascript">
function apply(){
     var newItems = document.getElementById("newItems").checked;
     var rejectedItems = document.getElementById("rejectedItems").checked;
     alert("Inside apply() method.");
     alert("newItems= " + newItems + ", rejectedItems: " + rejectedItems);
     window.location = "<c:url value='/list/'/>" + newItems + "/" + rejectedItems;
     alert("window.location= " + window.location);
     alert("Add extra delay!");
     return false;
</script>This is my Controller class:
// Method1: this method gets called when the user loads the page for the first time.
@RequestMapping(value="/list", method = RequestMethod.GET)
public String list(Model model, HttpServletRequest request) {
          System.out.println("Controller: method1: Passing through...");
          model.addAttribute("newItems", Boolean.TRUE);
          model.addAttribute("rejectedItems", Boolean.TRUE);
          // Does other things.
// Method3: this method gets called when user checks/unchecks one of the checkboxes and clicks on Apply button.
@RequestMapping(value="/list/{newItems}/{rejectedItems}", method = RequestMethod.GET)
public String list(@PathVariable Boolean newItems, @PathVariable Boolean rejectedItems, Model model, HttpServletRequest request) {
          System.out.println("Controller: method3: Passing through...");
          model.addAttribute("newItems", newItems);
          model.addAttribute("rejectedItems", rejectedItems);
// Does other things.
     }The way my jsp code is written now, it calls the correct method and displays the correct url. When page loads for the first time, it calls method1 and the url is:
http://localhost:8080/dir/list
When the user checks/unchecks one or both checkboxes and clicks on apply button, method3 is called and this url is displayed:
If both checkboxes are checked which both booleans are set to true:
http://localhost:8080/dir/list/true/true
Everything is fine... however, if I comment these two lines at the end of JavaScript apply() function,
alert("window.location= " + window.location);
alert("Add extra delay!");Then method3 will never gets called; only method1 gets called and I see this url:
http://localhost:8080/url/list//?newItems=%23&rejectedItems=%23&apply=Apply
I do not know why it gets confused bet. method1 and method3 and cannot pick the right method?
I tried to use the POST method instead, but the page goes directly to our internal error page and it never reaches the method I wrote in my controller for POST:
I don't really know what I'm doing wrong? Any help is greatly appraciated.
Edited by: ronitt on Dec 13, 2011 2:35 PM

I changed the <form> in the jsp to div and its working fine. I do not need to have comments in JavaScript funcion() anymore. I don't know why that made the difference though? According to:
http://www.w3schools.com/tags/tag_form.asp
The <form> tag is used to create an HTML form for user input.
The <form> element can contain one or more of the following form elements:
<input>
<textarea>
<button>
<select>
<option>
<optgroup>
<fieldset>
<label>
An HTML form is used to pass data to a server.
I do have <button> and also send the data - the value of checkboxes - to server. So I think it should also work with <form>.
Please let me know if you have any idea. Thanks.

9ias report server --could not get the response

i could not run reports server on linux 6.2.
it works like this ---- web site found, waiting for reply
then i get no response.
have anybody got answer for that????
plz help
i detailed configuration procedure (incuding patches etc)
will be much helpful.
thanks in advance
smaran
[email protected]

It's still not working even if I export for ORACLE_HOME
Red hat version : 2.6.9-5ELsmp
[oracle@appli bin]$ ./rwdiag.sh -findall
Environment:Environment java.lang.UnsatisfiedLinkError: /u01/app/oracle/mdw/lib/ librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
Environment:getEnvironmentStrings java.lang.UnsatisfiedLinkError: /u01/app/oracl e/mdw/lib/librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
java.lang.reflect.InvocationTargetException
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
REP-50503 No server found in the network

MSSQL Server 2012. Error accessing reporting website. Not Found The requested URL /ReportServer1 was not found on this server. Unable to uninstall MSSQL 2008

Hi all. I have recently installed MSSQL Server 2008, and was not able to access the URL when I clicked on it. It gave me a 404.
When I installed 2012, I tried the same thing and it also throws me a 404 error. How should I go about solving this? What are the log files that you may need to help me solve this?
At the same time, I have also tried to uninstall my 2008, but am always stuck at not being able to remove Client Connectivity Tools and some other components. Please let me know what log files you need and I will be happy to provide them. Thanks!
The following is the log for the uninstallation.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052368
Exit facility code: 1212
Exit error code: 1648
Exit message: Failed: see details below
Start time: 2014-04-11 09:40:30
End time: 2014-04-11 09:41:37
Requested action: Uninstall
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: ADC-PC
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: Singapore
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 Management Tools - Basic
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Management Tools - Complete
Enterprise Edition 10.50.1617.0 No
Sql Server 2008 R2 Client Tools Connectivity
Enterprise Edition 10.50.1617.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation edition: EVAL
User Input Settings:
ACTION: Uninstall
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
ENU: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: CONN,SSMS,ADV_SSMS,CE_TOOLS,BROWSER,WRITER
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTANCEID: <empty>
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
Detailed results:
Feature: SQL Writer
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Browser
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Compact Edition Tools
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1648
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\SystemConfigurationCheck_Report.htm

Strange, but finally the procedure below did solve my problem.
# Go to Control Panel > Add or Remove Programs and look for '''Anti Phishing Domain Advisor'''.
# If you click on ''Click here for support information'' you'll see it is a Panda program.
# Uninstall '''Anti Phishing Domain Advisor''' program...
# This did solve my problem
See also [https://support.mozilla.com/en-US/questions/811399#answer-205531 Can't open mail. Get this message: 404 Not Found nginx/0.6.32]

Messaging server not calling the SpamAssassin

HI all,
The current instalation:
For SJES Messaging :
# ./imsimta version
Sun Java(tm) System Messaging Server 6.2 (built Dec 2 2004)
libimta.so 6.2 (built 00:34:23, Dec 2 2004)
SunOS rcaredev 5.9 Generic_117171-08 sun4u sparc SUNW,Sun-Fire-V240
For Spam Assassin:
# ./spamassassin -V
SpamAssassin version 3.2.3
running on Perl version 5.8.8
The option.dat contents:
! for Spamassassin
spamfilter1_config_file=/opt/SUNWmsgsr/config/spamassassin.opt
spamfilter1_library=/opt/SUNWmsgsr/lib/libspamass.so
spamfilter1_optional=1
spamfilter1_string_action=data:,require "fileinto"; fileinto "Junk"
mm_debug=5
# cat /opt/SUNWmsgsr/config/spamassassin.opt
host=127.0.0.1
port=783
mode=0
verdict=spam
debug=1
# ls -l /opt/SUNWmsgsr/config/spamassassin.opt
-rw-r--r-- 1 mailsrv mail 52 Nov 15 01:49 /opt/SUNWmsgsr/config/spamassassin.opt
The imta.cnf contents:
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 poo
l IMS_POOL fileinto $U+$S@$D destinationspamfilter1optin spam
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL ma
ytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 destinationspamfilter1optin spam
I ran:
# ./imsimta cnbuild
# ./imsimta restart
Then I started thge :
# ./spamd -d
But nothing happens, if I manually run:
# telnet localhost 783
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
SPAMD/1.0 76 Bad header line:
Connection to localhost closed by foreign host.
Which proves that the spamd is listening on port 783.
The messaging server is not calling the SpamAssassin on the port 783, any ideas what could have gone wrong?
I also checked the "snoop" command and also "spamd -D" for debug, no traffic go to the spamd daemon.
Best

Hi,
goSolaris wrote:
The junk emails are sent now to the folder "Junk" in the users mailbox, can you comment on the following
1. Does the spam emails live in the Junk forlder forever until the user delete them?Emails aren't deleted from users email folders (including Junk) unless you have configured a folder expiry rule. The following web-page steps you through what is required to set up just such an expire rule:
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dttr?l=en&a=view
2. If I need to discard completely the spam emails instead of sending them to a folder in the user mailbox, what change should I do to the channel configuration?The following link gives an example of how to configured a sieve rule which will discard emails above a certain spamassassin score and to fileinto a 'spam' folder if the score is below this value.
http://docs.sun.com/app/docs/doc/819-4428/6n6j4261t?a=view#gebhx
3. After applying the patch, the documentation says that I can work with the existing configuration files or upgrade using a set of commands, do you think keeping the existing configuration (to minimize the changes) will work fine?You definitely need to run the ./patch-config and ./install-newconfig commands post-upgrade. Otherwise fixes that have been made to things such as the messaging express interface will not be represented (files need to be changed for a lot of the fixes).
Regards,
Shane.

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I can not load my yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server. Apache/2.2.9 (Debian) mod_jk/1.2.26 PHP/5.2.6-1+lenny4 with Suhosin-Patch etc... (too many characters for your ? page

Can't log into yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server.

OK here is the problem I am having with this.. It might be related to my own machine but I need help where to look..
on the command line using mintty on XP I have this:
$ nslookup us.mg6.mail.yahoo.com
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.155, 216.115.101.178, 216.115.110.119, 216.115.101.179
98.136.145.157, 98.136.145.154, 216.115.110.118, 98.136.145.156
Aliases: us.mg6.mail.yahoo.com, geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
HOwever when I look in firebug for where the ip for the above domain is this is what I get:
66.115.130.31 clearly not listed above..
Let's check the aliases
$ nslookup geoycpi-uno-deluxe.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 216.115.110.118, 98.136.145.156, 98.136.145.155, 216.115.101.178
216.115.110.119, 216.115.101.179, 98.136.145.157, 98.136.145.154
Aliases: geoycpi-uno-deluxe.gycpi.b.yahoodns.net
geoycpi-uno.gycpi.b.yahoodns.net
nope
$ nslookup geoycpi-uno.gycpi.b.yahoodns.net
Non-authoritative answer:
Server: Wireless_Broadband_Router.home
Address: 192.168.1.1
Name: any-ycpi-uno.aycpi.b.yahoodns.net
Addresses: 98.136.145.156, 98.136.145.155, 216.115.110.118, 216.115.101.179
98.136.145.157, 216.115.101.178, 98.136.145.154
Aliases: geoycpi-uno.gycpi.b.yahoodns.net
nope
where is this 66.115.130.31 ip comming from.. why isn't firefox using native DNS lookup?
When I do a reserve lookup on that ip it points to nationalnet.com as the top SOA..
any ideas?

When using firefox on yahoo and opening my mail it says Not Found The requested URL /dc/launch was not found on this server. How can this be fixed?

when using firefox on yahoo and opening my mail it says Not Found The requested URL /dc/launch was not found on this server. How can this be fixed?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server

Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
I wrote the Server Application with Tuxedo version 8.0.
And used tuxedo71 WS client to call the service.
The client application displayd tpinit fail.
ULog told me "prv7.1 not allowed,use -t option on wsl".
Is there any way to solve this problem?
thanks!

risen,
Yes there is a way to solve this. As the error message suggests, use the -t
option on your WSL server. Look at
http://edocs.bea.com/tuxedo/tux80/atmi/secadm10.htm#1284650
[ I know this documentation is astonishingly well hidden! ]
Peter.
risen wrote:
Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
I wrote the Server Application with Tuxedo version 8.0.
And used tuxedo71 WS client to call the service.
The client application displayd tpinit fail.
ULog told me "prv7.1 not allowed,use -t option on wsl".
Is there any way to solve this problem?
thanks!

Profile Manager - Not Found The requested URL /wiki was not found on this server.

I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found The requested URL /wiki was not found on this server." I followed the guide here for install http://krypted.com/iphone/setting-up-profile-manager-in-lion-server/.

This was the fixed I found
Fixing profile manager has been solved by someone else:
1. Turn off all services under Server app.
2. Under Hardware, settings, change SSL certificate to "none"
3. Under Hardware, network, reset host name again.
4. Under Hardware, settings, change SSL certificate back to correct one
5. Turn Web service ON.
It may still say /var/empty.
6. Turn Wiki service ON
7. Recheck Web service. It should be changed to /Library/Server/Web/Data/Sites/Default.

Report server parameter not calling the right url

Similar Messages

Maybe you are looking for