Only Last Quiz Score Saved?

I am a new Captivate user but a very experienced Authorware
user. I have created a quiz in my Captivate course which is
launched through our Learn.com LMS. I notice that each time I take
the quiz, it overwrites my last quiz score. Is there a way in
Captivate to only allow users to take a quiz one time? Or is there
a way to find out the score for every Captivate session?
Interestingly, I notice that each time I take the quiz, the summary
page says I've only accessed it one time. Any comments or
suggestions to help with this would be greatly appreciated.

Andrew,
Hello! It's me, Carol Paquette (cjp717). I finally got my
Captivate to work correctly with my Learn.com LMS! As it turns out,
because we have SSL encryption on our LMS, they had to unsecure the
page that launched Captivate in our LMS registry settings. I am
packaging for SCORM 2004 - Flash 8. Yes, recording is now working
like a charm but only the last quiz score is saved.
I looked for the resume option in Captivate but can't locate
it. I can tell you this - the user always starts at the beginning
of the tutorial.
I also ran several reports from my LMS hoping that I could
generate records from all the session taken but the LMS must be
keeping just one user record and always rewriting the latest score
in the score field.

Similar Messages

  • How to get the Success Factors LMS to record the quiz score for an Adobe Captivate 7 module.

    I have a few questions and one outstanding issue.
    My Issue:
    I can’t get the score to be recorded by the Success Factors LMS.
    Question 1)
    I notice that the quiz reporting section in Captivate 7’s Preferences menu has a “Data To Report” section.
    However, for SCORM 2004 and Tin Can, there is no option to report Quiz Score like there is for SCORM 1.2 and AICC.
    Is reporting the score impossible for those reporting standards?
    Question 2)
    My organization is using the Success Factors LMS and I’m trying to get the score to be recorded by the LMS.
    I’ve set the Published Captivate module to report the Quiz Score as a percentage (Points is unavailable to me since there are more than 100 pts),
    but the LMS is recording whether the module was Complete (passed) or incomplete (not passed or yet to be completed).
    Is (are) there some parameter(s) on Captivate’s side that I need to be setting for Success Factors to correctly record the score?
    - Maybe Captivate (in SCORM 1.2) should be reporting the Score as points and not percentage?
    - Maybe I should be using AICC?
    Is (are) there some parameter(s) on Success Factor’s side to interface correctly with Captivate?
    I’ve checked the Adobe forums, but I don’t see any help there and
    I’ve googled the issue to the point of exhaustion and frustration.
    So, I would very much appreciate the help.
    Thank you for your time.
    Provided below is a screenshot of my Quiz Reporting settings:

    Last year I worked with a customer who has the SuccessFactors LMS and, after some issues and discussions, the SF folks suggested their LMS supports AICC better than SCORM.
    That stunned me a bit...
    SO, sure, barring anything else, it may not hurt to try AICC!
    And I think SF is also limited in their SCORM 2004 support. If going with SCORM, definitely try to get SCORM 1.2 working first.
    Your settings look good to me. Maybe can't hurt to try 'points' but I'm not so sure that would work.
    So you're ONLY seeing 'Completed/Incomplete' not 'passed/failed' as you'd prefer?
    You're not seeing a recorded percentage at all?

  • Quiz Score in Slide Presentation

    Hi All,
    I have prepared a short tutorial in slide presentation format
    with 20 questions at the end, and I'm trying to get the quiz score
    (using Flash with AICC tracking) displayed on the last slide but I
    haven't been successful so far. I am using slide template in Flash
    Professional 8, and I followed the instructions in Flash help menu
    including copying all the required files onto my server, but I'm
    still having problem with reporting the quiz score.. The only thing
    I don't understand very well in the instruction found on the help
    menu is "start the LMS system (or create the AICC Course Descriptor
    Files) that references the frameset.htm file."
    I would appreciate if anybody could provide me with
    information on where to get help on this. Maybe there is a tutorial
    somewhere I am not aware of.
    Dave

    Bump.

  • Cp6 Quiz score reporting error in LMS

    Looking for any inputs - this one's a bit strange:
    I've been tasked with developing a course that allows the learner to test-out by jumping directly to the quiz. I've set up a series of advanced actions that allow one shot at the quiz without reviewing the course content, and actions that steer the learner back into the course after failing the quiz. All of these actions work, and the quiz score reports correctly each time within the course - the problem is what happens after that:
    I leave the course and go to the learner profile on the LMS - instead of 100%, the score is reporting as 75% (4 question prototype). I've set preferences to complete the course and report the score - the course reports complete, the only error is the incorrectly reported score. When I leave the transcript page and go back to the course, the course opens to the last question in the quiz, rather than the last page visited - and the question is not completed. Is this a setting I'm missing on the Cp6 side, or do I need to interface with the IT guys running the LMS? I'm running Cp6 with the most current patches on a Meridian LMS.
    Justenuf

    In answer to Rod's suggestion to set the score to percentage:
    Done - the client prefers that report anyway. Still seeing the stuff as described below.
    In answer to Erik's questions above:
    after the quiz, you have a quiz results screen that shows all the information you'd expect, right?
    Right - the quiz results screen in the course shows the score achieved
    If they passed, how do they close the lesson?
    The "Continue" button on the results screen is set up to take them to a completion page. that page has an "exit" button that takes them out of the lesson and back to the LMS.
    Does the LMS report the same result as the summary page?
    Yes if the quiz is set up to "submit all" answers at once in Quiz:Settings. (However, this is not my client's preferred set-up - so I'm still searching for the answers below)
    No if you have the quiz submit each answer individually - see below:
    The scores reported on the results screens for the quizzes in the red box above were 100, 90, 80 and 80, respectively.
    If they fail the lesson, how are they redirected back to the content?
    The "Continue" button on the quiz results page is set up to jump to the first page of content if the score is below passing.
    Then they go through the content?
    Yes - its required at that point.
    how do they retake the quiz?
    the "next" button on the last content slide takes them directly to the quiz.
    If they retake it, does the summary slide show the correct information?
    In the "submit all" mode - this all works perfectly.
    If set up to submit after each answer, if you fail the quiz and exit the course before retaking it, the score is reported correctly in the transcript - it seems as if it defaults to the minimum passing score in when you submit each answer individually.
    again, how do they then proceed to close the lesson?
    They exit the lesson using the "Exit" button, which closes it and takes them back to the LMS.
    I'd suggest adding a 'continue' button to that summary slide (if there's not one already) and instruct the user to click, take them to a 'congratulations' page and instructions to now close the lesson.
    Done - see above.
    Do you have the lesson reporting 'after every slide' or 'send data at end'?  If none of the above options help, try changing it from one to the other (in the 'template' options).
    I've set it using the submit all checkbox in Quiz:Settings - not sure how to access template options - is this a menu I'm unable to find?
    Thanks again for your time on this -
    Justenuf

  • AS3 how to save quiz score with SharedObject

    I'm working on a quiz using AS3 on timeline. I can't figure out how to save the score at the end of the quiz.  The result of quiz is displayed by its dynamic text box (out_score.text), but it isn't saved along with the rest of information. Please help!
    When I go back to section I, all information is displayed, but quiz score goes back to zero (0).
    I have section I, which collects user information. Section II, 25 question quiz, and section III, which displays information and score.
    SECTION ONE (labeled "inf"):
    // score variable
    var i:Number=0;
    stage.showDefaultContextMenu=false;
    // declaring sharedObject
    var userInf:SharedObject = SharedObject.getLocal("userInformation", "/");
    if(userInf.data.userName != undefined) {
    gotoAndStop("closing");
    // inf button
    inf_bt.addEventListener(MouseEvent.CLICK, saveData);
    function saveData(evt:MouseEvent): void
    gotoAndStop("pg1"); // here starts the quiz
    // SECTION II, for each correct answer
    i++;
    SECTION III (labeled "closing").
    out_score.text = i.toString(); // dynamic box
    userInf.data.userScore = out_score.text;
    out_score.text = userInf.data.userScore;
    // button saves score and user's information
    save_bt.addEventListener(MouseEvent.CLICK, gotoResults);
    function gotoResults(evt:MouseEvent): void
    userInf.flush();
    gotoAndStop("intro");
    Thanks for any help!
    German

    Kglad:
    userInf.data.userScore exists only on section III ("closing"). Here is a short version of my file.
    //INTRODUCTION
    stop();
    var i:Number=0;
    intro_bt.addEventListener(MouseEvent.CLICK, gotoInf);
    function gotoInf(evt:MouseEvent): void
    gotoAndStop("inf");
    //INFORMATION
    stop();
    stage.showDefaultContextMenu=false;
    // declaring sharedObject
    var userInf:SharedObject = SharedObject.getLocal("userInformation", "/");
    if(userInf.data.userName != undefined) {
    gotoAndStop("closing");
    // saving data
    inf_bt.addEventListener(MouseEvent.CLICK, saveData);
    function saveData(evt:MouseEvent): void
    userInf.data.userName = input_name.text;
    userInf.data.userDate = input_date.text;
    userInf.data.userAge = input_age.text;
    gotoAndStop("pg1");
    // QUESTIONS  -- 25
    // CLOSING
    out_score.text = i.toString();
    userInf.data.userScore = out_score.text;
    trace("out_score.text is " +out_score.text);
    input_name.text =userInf.data.userName;
    input_date.text = userInf.data.userDate;
    input_age.text = userInf.data.userAge;
    save_bt.addEventListener(MouseEvent.CLICK, gotoResults);
    function gotoResults(evt:MouseEvent): void
    userInf.flush();
    gotoAndStop("intro");
    // clearing data
    reset_bt.addEventListener(MouseEvent.CLICK, deleteInf);
    function deleteInf(evt:MouseEvent): void
    userInf.clear();
    gotoAndStop("intro");
    For your help!
    German

  • Can you submit a User Variable instead of the Captivate Quiz Score variable to an LMS?

    I am attempting to create two quizzes in a course that has branching.  I know that Captivate only allows for one quiz if you are using Question type slides, but I am using a simulation to check the knowledge of a process.  I want to report one of the simulation completions depending on which branch the user goes to (different branches for different products).  How or is it even possible to submit user variables in place of the Captivate Quiz Score variable, the time in the course variable, and the Pass or Fail status to an LMS?

    Sadly, I am using Captivate 5.5.  I was thinking it should be possible to use Javascript to be able to take a specific variable and submit it to the LMS in place of Captivate's Quiz variables.  I just don't know Javascript well enough to know how to do that.

  • The disk copy of "File_Name" was changed since you last opened or saved it.  Do you want to save anyway?

    When saving a Photoshop CS6 file I am suddenly getting this message: "The disk copy of “File Name” was changed since you last opened or saved it.  Do you want to save anyway?" I am not connected to a network and I had not downloaded any new software when it started. How do I fix this? and will this cause any file corruption? -Thanks

    Chris, thanks. Yes, I realize that something outside of Photoshop is modifying the file but how do I find out what is causing it or how do I stop it? I had not added any new software or upgraded anything when this started and I have never had this problem before. I don't use any font managers. I do have a virus barrier but, as I've said, I have had this software for awhile and can't imagine why all of a sudden it would be interfering with my file. I spoke with Apple to see if the problem might be on their side but they seem to think my Mac is running fine. My biggest concern is will this cause my file to become corrupt? Before closing out yesterday, I created a new document and copied everything from this file over into the new document and renamed it in the hopes that it may help... Maybe something was wrong with that original document. Not sure that will work but will find out today. Also, I haven't worked on any other files since this started. So, I'm not sure yet if this is happening to this file only or if it may happen to future files. -Thanks

  • Quiz Score Slide - Review Questions

    Hi all,
    I have put a number of discussions now and still can't seem to get this to work.
    Once a user has completed the quiz and got to the quiz score slide to find out if they have passed or failed - for both I would like them to be able to 'review answers'. I know there is a review quiz but this just tells them what they got wrong or right and not why.
    I have searched on Captivate and online to figure out how to make this work. I would like the user to be able to go through each slide and when there is a question they got wrong, there is an explanation for them.
    Is this possible and how do I do it?
    Thanks

    Hi there,
    You can have a slide as an explanation slide next to your quiz slides. You can use a conditional advanced action under On Enter property of the explanation slide. With the help of a variable called cpQuizInfoLastSlidePointScored, you will check whether the last answer was correct or not and have the explanation slide show/hide accordingly. For example, if each question in your project has 10 points associated. The variable will check whether the last question slide scored points were equal to 10, if yes then jump to next question slide and if no then go to the explanation slide.
    Here is how it will look in the advanced action window:
    Where Slide 4 is the next question slide and Slide 3 is the explanation slide.
    Hope this helps!
    Thanks!

  • Your disk copy of image was changed since last opened or saved

    I recently clean installed 10.6.1 on a brand new hard drive together with CS4 including all recent Adobe updates. Apart from Acrobat Reader I have no other Adobe software on this computer.
    When I open and start to work on a file all seems fine and the first time I try to save it's OK, but on the 2nd attempt and there after I get a strange message pop up like the attachment telling me that the file has been changed since it was last opened or saved.
    To try and resolve this problem I have trashed the preferences, verified that fonts are OK with fontagentpro and double checked all my preferences inside Photoshop but nothing there suggests any problems. I also cleaned the fonts cache but this message continues. It has been suggested that the message is being caused by some other application, however it is happening even when Photoshop is the only active application. Does anybody know what could be causing this?
    Thanks
    Ashley

    I believe I have just found the answer to this problem but it all happened quite by accident and I wonder if others may be suffering from issues in CS4 with snow leopard for similar reasons. A couple days ago I tried using the Kodak Gem Airbrush Pro plugin which is occasionally useful, though I hadn't needed it since installing snow leopard. For some strange reason it was refusing to accept my registration code and and was either causing Photoshop to crash badly or else left the watermarks on the image.
    I wrote to Kodak about this who replied earlier today that this was likely to be a permissions issue with the preferences folder in the shared users library, so they suggested I run a command in the terminal to alter those permissions. When navigating there manually, no such folder existed, but after running the command line the folder appeared and the only item inside it was that Kodak preference.
    To cut a long story short, not only has the Kodak plugin started to work properly but all the other strange error messages and frequent crashes also immediately stopped. I've run the same tests now more than a dozen times on different files without a problem.

  • Your disk copy of image was changed since last opened or saved (Mac OS)

    I am  occasionally getting a message that "the disk copy of image  was changed since the file was last opened or saved". The OS is 10.6.6 and I am using CS5. It happens on no specific file. All of my files are pretty big. The current one that this is happening on is a psb that is 3.26 G unflattened. I have from  ignorance always ignored the message and saved anyway. I have never detected any damage or discernible changes to the files after ignoring the warning, but after searching Adobe forum and reading a thread about this happening in CS4, I guess I should be more cautious and do a save as and change the file name. I started this thread because no one has reported the issue happening in CS5.
    The files were all given to me by ftp as either psd, tiff or camera raw files.  I work on duplicates of the originals in no other program but photoshop and opened and closed the files a few times before getting the message about the disk copy being changed. All of my files are saved to an internal harddrive and  backed up on a time capsule device. I am on a network, but am the sole user of the network. The files are  worked on and saved to an internal hard drive on the same computer. They are never opened on another computer which is usually turned off. I am running no virus protection software except what ever is native to the OS. The only other applications I am running when getting this message are safari, mail and sometimes bridge.
    Why am I getting this message and what is causing changes (that I can't detect) to the disk copy?

    Really, damn
    I wonder what it can be. I'm 100% sure its nothing running in the background changing the files in my workflow.
    I checked everything and its funny because it is the same on 3 Mac Pro here ???
    So it must be a bug some where in Adobe's files/apps/etc
    Some combination of files, setup or what ever making the error come up.
    I never had it before i upgraded to 10.6.x Before all Mac Pro was running 10.5.8 with PS CS4 and it worked alright.
    Then i upgraded all our Mac's to the latest to get the 64bit feature and PS CS5 and even the newer CS5.5
    And then it started and its also with the newest PS from CS5.5
    First i thought i found the problem because i saw a post at Extensis forum about the Suitcase FM core and Fontsense
    extension for Photoshop and i deleted the extension from photoshop plugin folder and i was happy at first but then again.
    It came back after a wile.. Sucks. Not that.
    I wonder if its really because PS thinks the image was changed. I know it suppose to be that way but in our situation it is
    something else. A bug ofcause and i have been trying to figure this out the last 3 days and even yesterday i used 7 hours
    in a row to find a solution but i never found it.
    I really hope we can find a way other than reinstalling Mac OS X and Photoshop. I do think if we formatted the drive and
    started all over it would help but i don't want to do that because it will take me for ever to set up from scratch, yarggg
    What do you think ? Do you have any idea whats so ever what could course this ? any ideas

  • Reporting quiz score when spread across separate lessons? cp8

    Hi,
    I have 7 lessons in my course. The LMS does NOT support a mastery roll-up score like the originally indicated they did. They cannot be combined in to one lesson. They are large. 
    So each has a portion of the quiz (no, they cannot be all placed in one lesson, they have to be separate). What I'd like to do is gather the scores of all 7 parts and tally them in to one final score to report to the LMS. As I see it, Captivate does not support this. I spotted CPGuru's Save & Load data widget. This looks like it will really help out. I think using this I can save each partial score and then in the final lesson tally them all up. The problem now becomes how do I report that score to the LMS as THE final quiz score result? I don't see a way to modify the quiz variables.
    Ideas? Another widget out there?
    Thanks!
      Lori
    CP8, Windows 8.1, publishing SWF.

    That is really a strange LMS you are using: no gradebook or something similar at all? What you are asking for is typical a functionality of (most) LMS's.
    Quizzing system variables are read-only, you cannot change them at all. Although you could transfer the results of the different quizzes to the 'master' project, how will you transfer them to the quizzing system variables. Only those define what will be put in the SCORM reporting. For a different goal, reporting custom questions, I have been looking for ways to get results into the quizzing system variables, but for a use case like yours I only see Javascripting as a solution or the use of the Mastery widget by Infosemantics (SWF-output only). Summarizing the resulting scores into a user variable is pretty simple, but not transferring it to the quizzing system variable. Only scores attached to question slides, or to interactive objects are included in those system variables. Have a look at my workaround for a much simpler use case for one custom question, maybe you'll understand the problem better:
    Report Custom Questions - part 2 - Captivate blog
    I have no blog post about the solution with JS, sorry.

  • Exporting Quiz Scores to Excel

    How can I export quiz scores to a spreadsheet or database
    without using Coldfusion or an LMS? The only references I can find
    suggest using Coldfusion. I have access to Dreamweaver, but no
    access to Coldfusion or an LMS.

    Welcome to our community, smjohnson_1
    I'm assuming you are referring to Tim Mushen's article at
    this
    link.
    What you could do is to work with someone familiar with
    linking web pages and forms to other databases. Then using the
    information provided in Tim's article, you could have a custom
    solution developed and implemented.
    Cheers... Rick

  • How to print the text in only last but one page in sapscripts

    hiiiiiiiiiii,
             explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

    Hello,
    The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
    So u can handle the situation in ur form like this
    /: if &PAGE&  = &SAPSCRIPT-FORMPAGES&
    p1 TEXT
    /: endif
    Try in this way it may help u.
    Regards

  • My ipod touch 4th gen battery only lasts for 3 hours with wifi and brightness fully down

    My ipod touch 4th gen battery life if asful only lasts a maxium of 3 hours with wifi turned off and brightness fully down any suggestions?

    You can try restoring the iPod. However, it could be that the battery is going bad.
    Apple will exchange your iPod for a refurbished onewith a new battery for $79. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the followingwill rplace it for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. You can purchace a replacement battery for about $10
    iPod Touch Repair – iFixit

  • My battery only lasts aboround 3 hours

    My battery only lasts around 3 hours

    Don't bump old threads.  You have an active thread right now.  I doubt Melle is going to check this thread anytime soon.

Maybe you are looking for