Only receive distribution group- mails when logged on.

Hi,
Is there a way to automatically disable mail-receiving for users when they are not logged on to the AD?
We use distribution groups to deliver mails to platform-agents.
Most of them only need to receive mails when they are at work.
Thanks for your ideas,

Hi Tester, sorry about the delay in response. I would like to understand your issue more and what you are trying to achieve.
Does the users need to receive emails sent to a distribution group (that they are part of) only during 8am to 5 pm? something like that?
The answer really depends on the setup that you have but for the most part, emails sent to Exchange and immediately processed and delivered to the respective mailboxes. Perhaps you can schedule email delivery from the outlook client - when someone is sending
the original email to the distribution.
Regards.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Regards, Siva

Similar Messages

Why do I not receive iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail

I noticed this when I started my iCloud e-mail account a few months ago. I am not receiving iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail. I can receive the e-mail on my outlook & local cable providor e-mail accounts with all of the addresses listed. If I strip out the "To:" addresses and send it from my local cable providor e-mail account to my iCloud e-mail account than I will receive the e-mail in my iCloud account (minus all of the "To:" addresses that are in the body of the e-mail. This has caused me to miss a lot of e-mails.
Following is one of the e-mail that I can send from my cable providor account and not receive it in iCloud. If I strip out all of the "To:" addresses I will receive it in iCloud. I have a case open with Apple but it is not going anywhere. This occurs from multiple sending internet service providors (ISP's) so I think it's an Apple iCloud e-mail processing issue.

I've been having a very similar problem to what ziemsen describes, for about a week now. The Mail app has stopped delivering new messages to the Inbox, even though I can view the newly incoming messages on the server via Webmail. I am able to send email through Mail with this email account, and as for the other email accounts that I have on Mail (which are also hosted by the same server), I am able to both receive and send email with no problem.
None of the mail settings have been changed, so how this happened all of a sudden is very puzzling. I have checked Account Info on the problem account - Mail recognizes that there are messages that are on the server yet to be downloaded, but it won't download them.
I've checked what other users have suggested here in the Discussions Forum, and tried: 1) deleting the problem Mail account from Mail and re-adding it; 2) creating a new machine User account and setting up Mail with that User; 3) setting up Mail on another machine; 4) archiving and re-installing OS, and even 5) wiping the HD entirely and reinstalling the OS. None of these have worked.
Ernie, your suggestion of deleting the MessageUidsAlreadyDownloaded file sounded like the solution to the problem, so I just tried it - but to no avail. Mail delivers messages that are on the server to my Inbox up until the same point that it always stops at, and there are almost 1000 new messages since then.
I am pretty lost at this point - I have no idea what else I can possibly do to resolve this problem. The strange thing is, when I tested my email accounts on Microsoft Entourage and Mozilla Thunderbird, they don't have this problem - both deliver all of my incoming mail. I may have no choice but to switch to one or the other at this point, but I'm attached to Mail and would really like to continue using it if I can. Any advice would be much much appreciated.
very best,
biteringo

[svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

TS3276 Hi, I have a IMac and a MacBook Pro + my IPhone....I only receive ALL my mail on my IMac...the IPhone received maybe 1 or 2 emails and the MacBook Pro the same....only 1 or 2...while the IMac received;ex 28 emails...I am trying to troubleshoot this

HI, I have a IMac and a MacBook Pro plus my IPhone...I only receive all my mail on the IMac...the MacBook Pro only receives maybe 1 or 2 emails and the same for the IPhone...Anyone know what I can do?
Thanks

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

How do you send a video via Gmail? Since upgrading to ios7 on my Ipad, ican't send .can only receive on the Mail.Can do both on Gmail but when I go on attatch it only accesses my pics not my videos

Since upgrade to ios7, I have not been able to send messages via Mail. I can only receive.I can do both on Gmail but when I try to attatch, it only accesses photos not videos,any idea how I can attatch a video?

Here's a troubleshooting article from Apple: iOS: Troubleshooting Mail
It doesn't seem to cover your specific issue, but have you tried using a different network (either a different wi-fi network, or switching from wi-fi to cellular or vice-versa if you have a wi-fi+cellular iPad)?
For GMail, iCloud and Yahoo, copies of messages are stored on their respective servers, so you could try deleting the account on your iPad, then re-adding each account one at a time to see if that resolves the issue.

Automatic rules to Internal distribution group failing when authentication is enabled

Hi Forum,
I have set up a rule on a user's PC whereby when he ([email protected]) receives an external email (from [email protected]), it should be automatically forwarded to a
distribution group ([email protected]) with cc to
[email protected] and
[email protected] .
This worked well for some time until recently when it started failing. The only way we can get this working again is when we disable authentication to the distribution group ([email protected] ). We do not want
this disabled as we don't want the outside world to Spam this distribution group. No changes has been made to the system which could have caused this issue.
Is there a way to get this rule working without disabling the authentication?
Cheers
Arvind

Hi Arvind,
Please refer to the following screenshot to create a transport rule and check the result:
Best regards,
Niko Cheng
TechNet Community Support

Cannot manage Distribution group membership when two exchange accounts are configured in outlook.

Hi,
I am using outlook 2013 and my exchange server is 2013 too.
I have a distribution group named "[email protected]" and my user "[email protected]" is moderator of this DL and i was able to add/remove members from this.
Now, I own one more exchange account as "[email protected]" and i configured the same in outlook 2013 as an exchange account and what i see is i am unable to edit the DL "[email protected]"
My default account in outlook is "[email protected]" still i cant edit the DL. As i delete the account "[email protected]" from outlook or configures it ([email protected]) as an IMAP i am able to moderate "[email protected]".
Any Clue ???
Error message :- "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform this operation on this object."
My Exchange server 2013 and outlook both are having latest updates installed. Thanks.

I have configured second account as Exchange only in the same Outlook profile. I don't want to switch my profiles to operate the either the accounts.
Both the accounts are different and don't have any relevancy to each other. "[email protected]" and "[email protected]"
What i suppose is, "[email protected]" is having permissions on the DL "[email protected]"
but "[email protected]" dosent have it. So when i edit "[email protected]" outlook is
using "[email protected]" to edit it and not "[email protected]"

Help with a group issue when logging out of Skype

If I exit Skype then restart it and log back in, I can't access some groups. Clicking on them in the recent tab will set my focus back to what I was already on and won't display the chat at all. The only fix I have found is to reinstall Skype.
Anyone have any ideas of how to fix this?

I'm guessing this is pre cloud groups. When in a chat group type /get name in the chat. If the reply starts with a 19: , your in a cloud based chat, if it starts with #skypename you're in a p2p chat.
The newest versions 6.22 and above uses cloud chat the lesser ones do not. If the chats are p2p, you might want to downgrade to the 6.21 one.
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

10.4 clients group selection when logging in...

We have a couple eMacs that we have to keep around and they can't upgrade past 10.4. However, when students log in, they are presented with the choice of selecting which group they want to log in as. They're only used basically for one program (although others are useable), which is put on the dock via the computer list in WGM, so it doesn't really matter which option they choose, but it can be confusing and annoying to constantly have to do this. Is there a way to log them in automatically with the group with the most access (and have it merge dock items from the other groups, which it doesn't seem to do in 10.4)?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Can't send email only receive using safe-mail

I have a www.safe-mail.net email account and i have been trying to set it up on the Iphone.
I switched pop 3 on etc in safe mail and entered the settings it suggests. I managed to receive email but it kept refusing to send it out.
If anyone has any ideas would really appreciate it as it is driving me mad.
thanks

The Mac Mail program is not stupid but garbage in = garbage out.
The colon being added between Earthlink's server and your user name is normal with an authenticated SMTP server.
Although I have cable modem internet service at home, I've kept an old Earthlink dial-up account for use when traveling if a high speed wired or wireless connection isn't available (which is becoming less common). I use Earthlink's authenticated SMTP server to send messages with my Earthlink account when connected to my ISP at home and to send messages with my other email accounts when using Earthlink's dial-up for internet access when traveling.
My Earthlink SMTP server settings are as follows:
SMTP Server: smtpauth.earthlink.net
Server Port: 587 (this is determined by the ISP used for connecting to the internet but since you are not using Earthlink for internet access, Port 587 should work but not always)
Use Secure Sockets Layer (SSL): Off or not selected.
Authentication: MD5 Challenge-Response
User Name: Your entire Earthlink email address.
Password: Your account password - the same password use for checking the incoming mail server for new messages.
If these settings do not work, it is likely the ISP you are using for internet access is blocking the use of all SMTP servers that are outside of their network on any port even if authenticated.
I don't want to use my ISP's way of sending and receiving email.
I just want to use my ISP for DSL service and keep my earthlink
mail email address.
Unfortunately, you have NO control over this. You are at the complete mercy of your ISP and their restrictions.
You can add your ISP's SMTP server information to the Mail.app and select/use your ISP's SMTP server to send messages with your Earthlink account which is completely invisible to all recipients.

How do I get my US based iPad to receive and send mail when I am in Trinidad?

I'm visiting Trinidad. I can connect to the Internet, but I cannot send or receive email.
If anyone knows how to make email work, I would very much appreciate your help.
I live in New York City.
Thank you.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT3576 I only receive notifications for apps when i go on them and they are enabled in the notification centre. What do I do?

Right. My friend gave me her iPhone 4 running the latest iOS 6.1.3 and I have all apps turned on in the notification centre however I only get new notifications when I go on the app e.g. Kik, WhatsApp etc. what do I do? Also my FaceTime and iMessage don't appear to work and this might be related to the problem possibly

Do you have an active data connection?

I am receiving the following message when logging out of my bank account. What does this mean and how can I eliminate it? Thanks

"Your browser has blocked an attempted to logout of the application properly. To ensure your privacy, please close the browser window".

I tried both actions but nothing was listed in either option. Thanks anyway. The only other thing I can think of is that in order to use Mozilla it must transfer data from my Yahoo.com account. Could this be the problem? Otherwise, I will simply Close the window each time I log out of my bank. Thanks

Am I suppose to receive an e-mail when my ship date changes? I haven't heard ANYTHING.

I haven't received anything about my order. I have had to call to get all information about my ship date changing.

Yes, you were supposed to receive a confirmation email after you place your order with a 10 digit order # so you can check the status. Then after your status has been process (which could take days or weeks) you should received an email that your phone has been shipped with a tracking #. VZ should send out a notification if there is a delay with the order. If you have not received any type of email then i suggest to call VZ and find out changes were made that you don't know about. Hope that helps and good luck!

Is there a way to establish when a distribution group email address last received a message?

We currently use Exchange 2007 but are planning to migrate to 2013 soon. As part of the prep for migration I want to tidy things up, and part of this tidy up is to remove unused distribution groups.
The user community is one that refuses to let go of anything (our retention policy is keep everything, forever), so if I ask them if they still need these groups the answer will be yes for all.
So, is there any way I can pull a report of the last time the email addresses associated with these groups were used?

Apart from above, once you find unused users list, You can try below steps to remove them in exchange 2007 : Simply open the group from the recipient configuration, Distribution group node (or from Active Directory Users and Computers). Select the members
tab and select the user and click the X.
You can take a look at this helpful article to gather more information about this concern : http://windowsitpro.com/exchange-server/exchange-2007-distribution-groups
Furthermore, when you are preparing to migrate database from exchange 2007 to 2013, you can have a look at this proficient resource available at (http://www.exchangemigrationtool.com/) that would also be
a fantastic approach for a secure migration of mailbox data between two exchange server.

Only receive distribution group- mails when logged on.

Similar Messages

Maybe you are looking for