Oo transaction with parameters

Hi,
I would like to create a "OO transaction" for a public class method . The method is having an one import parameter. Is it possible to call OO transaction with the method argumnet.
Ex: class1->method1(arg1). is it possible to wrap this method with oo transaction . if so ,how can i call the transaction to pass value to the method.

Hello Jey
Parameter ID 'BUK' is used to set the company code.
Thus, in your MAIN method (which is started by the OO-transaction) you could code at the beginning:
GET PARAMETER ID 'BUK' field me->md_company_code. " instance attribute of your class
However, I would place this coding into the CONSTRUCTOR method of your class.
Regards,
Uwe

Similar Messages

Calling Transaction SP01 (Display spool requests) with parameters via URL

Hi,
I would like to be able to list all spool requests of a certain title via a URL.
Unfortunately ITS does not seem to work. A URL constructed like this
http://host:port/sap/bc/gui/sap/its/webgui/!?sap-system-login-basic_auth=X&sap-client=500&sap-language=EN&transaction=SP01&S_RQTITL-LOW=Testing123&okcode=CRET
causes a short dump that SP01 (Program RSOSP01NR) is a Module Pool.
I am therefore considering the following options:
1. BSP Program
2. Java WebDynpro
3. ABAP WebDynpro
Ideally, I want to be able to enter in my browser something like
http://host:port/<BSP_or_WebDynPro_stuff>&~title=Testing123
and for this to show in the browser a list of all spool requests that are named "Testing123".
Can someone advise whether any of the above options are preferable?
Also, whether such a program should call transaction SP01 with parameters (skipping first screen) or look to using the associated function modules.
Many thanks for any assistance.
Regards
Adrian

Solved myself. Thanks

Call a Transaction iView with parameters

Hello,
can anyone help me with the following problem:
I'll just tried to call the transaction RECN with a transaction iView. When I test the iView it works but not with any parameters in the URL.
I'll tried the parameters fix in the iView properties but without any result.
Can someone tell me the correct syntax? I'll tried everything I can find in the SAP help and here in the forum.
Have someone a how to for calling transaction iView with dynamical parameters?
Thanks for help!
Best regards
Martin

Martin,
Have you had a look at these yet?
http://wiki.sdn.sap.com/wiki/display/EP/StartanSAPtransactionfromaURL
How to launch SAP transaction & pass parameters via URL
Cheers!
Sandeep Tudumu

PR05 Transaction Iview with parameters

Hi,
I have one abap webdynpro appn in which after a button is clicked, it has to go to PR05 transaction with necessary parameters like employee number, trip number.
So i have used the NAVIGATION_ABSOLUTE method in dynpro, and in the business_parameters i have passed the values.
But the iview is opened and still in the same first screen of PR05 with out passing the parameters with the pop up message "Choose a valid trip".
In my case, the business parameter is not working fine, as i can see that it still shows the first screen and also the employee number is the login user employee number and not the one which i gave.
In the iview, i have already given the "Parameters forwarded to Transaction" = PER,TNO.
And also "OK Code Field" = 'MOD', "Process First screen" = Yes.
Any other thing need to be given?
Thanks.

Martin,
Have you had a look at these yet?
http://wiki.sdn.sap.com/wiki/display/EP/StartanSAPtransactionfromaURL
How to launch SAP transaction & pass parameters via URL
Cheers!
Sandeep Tudumu

In EP, call R3 transaction with dynamic variant name

Hello
I know that I can call a R3 transaction with a dedicated variant thanks to the process below:
Create a transaction iview , Tcode = "START_REPORT"
In application parameters pass these values separated by '&' sign.
D_SREPOVARI-REPORT - your report
D_SREPOVARI-VARIANT - your saved variant.
choose skip inital screen in the parameters.
But do you have a tip to call a different variant for every user.
For example, I have users "1111" and "2222". In R3 I have created the variant "1111" and "2222" for a transaction.
In EP, I would like that when I call this transaction connected as "1111", the variant "1111" is used, and when I'm logged as "2222", the variant "2222" is used.
Do you know how I can do that ?
Thank you !

Hello,
where is the information which user has to call which variant stored? If it's in R/3 then you can write an wrapper report which is called from the Portal, adds the Variant information and then calls the original report.
Regards
Gregor

How to call a transaction with a variant

Hi all
I created a bdc program after updating it should call another transaction with predefined variant that that transaction program is of type module pool.
can anyone tell me the syntax how to call a transaction with a variant.

Hi
goto Tcode SHD0
enter the Tcode for which Tran Variant has to be created(dialog Tcode)
enter Trans variant to be created
press create button
it will go through all the screens of that Tcode and save
and modify the fields as per requirement
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).
Regards
Anji

Drill down feature with parameters

Can we drill down in smartview by taking the parameters from the existing row and column?
For example: I have a group with different entities A, B, and C. In smartview, I have all the accounts in the rows and the three entities A,B,& C in the columns. When I double click on the combination of entity A and an account, I want to see all the transactions with ICP Entities for that entity A. Does smartview has the feature to know the column and then drill down based on the column header?

If you are using Essbase Studio or EIS the intersection is passed as parameters to the SQL in the format of $$Column-name$$ and $$column-value$$ so yes it does know the intersection values.

Calling stored procedures with parameters with the Database Connectivity Toolkit

Hi all,
I am new to the forum and am having difficulty finding a solution to a particular problem I am having regarding using the LabVIEW Database Connectivity Toolkit on a project I am currently working on at my job. I have a database in which I have tables and stored procedures with parameters. Some of these stored procedures have input, output, and return parameters.
I have been trying to follow this example but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument
One such stored procedure I am working on implementing is named "dbo.getAllowablePNs", which executes "SELECT * from DeviceType" (DeviceType is the table). In this case, it does not require an input parameter, it has an output parameter that generates the table [cluster], and has a return parameter which returns an integer value (execution status code) to show if an error occurred. The DeviceType table has 3 columns; ID (PK, int, not null), PN (nvarchar(15), null), and NumMACAddresses (int, null). I have gone over many examples and have talking to NI support to try to implement this and similar stored procedures in LabVIEW but have not been successful. I am able to connect to the database with the Open Connection VI without error, but am running into some confusion following this step. I am then trying to use the Create Parameterized Query VI to call the stored procedure and set the parameters. I assume I would then use the Set Parameter Value VI for each parameter that is wired into the parameters input on the previous Parameterized Query VI? I am also having some confusion during and following these steps as well. I would greatly appreciate any advice or suggestions anyone might have in regards to this situation as I am not a SQL expert. Also, I would be happy to provide any more information that would be helpful.
Regards,
Jon
Solved!
Go to Solution.

Also, I don't know if this would be helpful but here is the actual stored procedure in SQL:
CREATEPROCEDURE [dbo].[getLastSequenceNumber]
@p1 nvarchar(10)='WO-00000'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SETNOCOUNTON;
-- Insert statements for procedure here
selectmax(SequenceNumber)from Devices where WorkOrderNumber= @p1
END
GO

Discoverer report with parameters and functions

I am new to Discoverer. Is there a way to create a report (with parameters) of one line per customer such that the following data will be displayed for each customer?
Among the parameters is: from_date (month & year) ,to_date
The basic query gives totals for each date (month & year) for every customer.
Among the fields displayed:
1-customer_id,
2-balance until from_date,
3-total activity between from_date and to_date
I have a function to calculate the total balance until from_date, but then I cannot get the total activity on the same line. I tried using another function and I tried using a total calculation but to no success.
Is this possible?
Thanks.

Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael

Create transaction with variant not working

Hello!
Here's my issue -- I have a program that, right now, is more of a shell than anything else. It is to access the HR Logical Database PNPCE, and to help filter the data I pull back, I created a Selection View with a couple of additional fields. I put the necessary values in these fields and saved it as a Variant.
All I want to do is create a transaction to run my program and start it using my Variant to fill in these additional fields. Using SE93, I can create a plain transaction with no problem. However, if I click the "Start with variant" drop-down field, I get a response that says screen 1000 (my default Selection Screen) has no variants.
At first we thought there was some client-side things needing configuration, but if I go create a quick-and-dirty program with a single Selection Screen value (no Selection View) and a Variant, SE93 sees the variant with no problems. So I'm wondering if maybe it has something to do with the fact that I'm using a Selection View. Unfortunately, I'm so new to ABAP, I'm completely stuck on how to proceed.
Any suggestions? Thank you so much!

Saquib, thank you SO much! You're right -- that worked.
As a relative newbie to SAP R/3 and ABAP, I'm new to little quirks like this. In other examples, the list (F4) does show the variants. For some reason, this one didn't. I entered it anyway, saved, and ran the transaction, and it popped up with the fields populated from the variant.
Again, kudos and thank you so much. Points duly awarded.

How to call PDF Report with parameters in jdeveloper 10.1.3

Hi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frank

Hi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frank

I cann't execute javac with parameters. please help !!

Hi All!!
I can't understand how to execute application or bat file (javac.exe for example) WITH parameters correctly.
I can execute javac.exe or bat file - WITHOUT parameters :
Process p = Runtime.getRuntime().exec(WIN_PATH + " " + WIN_FLAG + " " + "javac.exe");
But I can't execute correctly the command like:
"javac.exe -classpath C:\Alex; Test.java"
I tried to use exec(str,env[]) and exec(cmd[]) methods, but there were different errors as a result :(((
How can I execute the command "javac.exe -classpath C:\Alex; Test.java" ? Is it possible?
Please help me by a good idea.
Thank you.

right you are! That's why we use "\\" instead "\" :)
If i try to execute this command -
cmd=WIN_PATH + " " + WIN_FLAG + " " + "c:/j2sdk1.4.0/deleteMe/javac.exe -classpath C:/WORK/jboss-3.0.3/client/jboss-j2ee.jar;S:/Alexander/jars/sys.jar;S:/Alexander/jars/ejb_conf_dev.jar;S:/Alexander/jars/; C:/j2sdk1.4.0/deleteMe/aaBean.java";
my OS Windows 2000 returns na error - "Error opening icon..."
What's wrong?
Thank you...

List view - filter with parameters

Hi,
I need to define a list view to filter data with parameters.
I saw how to do it with the SPD in another post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92271aa4-6582-4ea5-a10f-deaf02d2b62c/filtering-the-list-view-by-passing-date-parameters-using-sharepoint-desginer-2010?forum=sharepointcustomizationprevious
But need to do it in visual Studio (via definitins or Object Model).
How can I do that in Visual Studio?
Help is really appreciated.
Many thanks,
DD

Hi,
According to your description, you might want to create a list definition with the filter value from query string from URL. Then when you create a list instance with this list
definition, you will be able to filter the list view page by appending parameters to the URL in the address bar.
You can achieve this through modifying the Schema.xml file in the list definition project in Visual Studio like this:
How to create custom list definition
http://msdn.microsoft.com/en-us/library/office/gg276355(v=office.14).aspx
http://www.codeproject.com/Articles/412429/SharePoint-Create-List-Definition-and-Instanc
CAML Query Schema
http://msdn.microsoft.com/en-us/library/office/ms467521(v=office.15).aspx
Then we can filter the list with such an URL:
http://sp/Lists/List1/AllItems.aspx?Param1=2014-08-24&Param2=2014-08-28
Best regards,
Patrick
Patrick Liang
TechNet Community Support

SSRS cube report with parameters...and more

Hi,
I have created some basic SSRS reports in the past with parameters, but I was just given the following project by my manager and I would like to find out 2 things:
1. Can this be accomplished using SSRS
2. If yes, what are the High-Level steps needed to get this accomplished
First off, the SSRS report(s) will be connecting to an SSAS cube, so there will be some MDX involved. The cube is fairly simple, 1 measure group and 3 dimensions.
The main piece of this project will be 4 parameters that will be displayed to the user; Quarter, Division, Operations, and ReportList.
The Quarter is just the Quarter that the user wants to run the report for (Q1-2012, Q1-2013, etc..). This will come from the Date Dimension The Division will be a list of all of our internal divisions that we have setup in our Client Dimension
table (Eastern Division, Western Division, etc...). The Operations will be list of operations for each division selected in the Division parameter (Boston Ops, NY Ops, etc...). This list will also come from the Client Dimension. The ReportList
will be a list of all reports that are related to the Division and Operations Selected. For example, Eastern Division and Boston Ops could have 3 reports, Western Division and San Francisco Ops has 5 reports, etc...
The final piece to this is that when the user selects the reports to be generated, they will have to be created into 1 report. This way the user can convert the report to 1 single PDF file or print the report. So if 3 reports were selected, each
report would be a separate page and could then be converted to a single PDF file or printed.
I know that SSRS has the ability to create cascading parameters, so that should take care of dynamically generating the Operations parameter drop down as well as the REportList drop down. Of course, using MDX to accomplish this will tricky since I
haven't done much with MDX.
I guess my last concern is how to generated multiple reports given the parameters selected and have them be combined into 1 report? I was thinking subreports, but not sure if that would work.
Any feedback or concerns/ideas on how this can be accomplished using SSRS?
**Using SSRS 2012
thanks
Scott

Do you have a question? The title doesn't provide sufficient information what you are after.

How to call a AM method with parameters from Managed Bean?

Hi Everyone,
I have a situation where I need to call AM method (setDefaultSubInv) from Managed bean, under Value change Listner method. Here is what I am doing, I have added AM method on to the page bindings, then in bean calling this
Class[] paramTypes = { };
Object[] params = { } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
This works and able to call this method if there are no parameters. Say I have to pass a parameter to AM method setDefaultSubInv(String a), i tried calling this from the bean but throws an error
String aVal = "test";
Class[] paramTypes = {String.class };
Object[] params = {aVal } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
I am not sure this is the right way to call the method with parameters. Can anyone tell how to call a AM method with parameters from Manage bean
Thanks,
San.

Simply do the following
1- Make your Method in Client Interface.
2- Add it to Page Def.
3- Customize your Script Like the below one to Achieve your goal.
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
operationBinding.getParamsMap().put("username", "oracle");
operationBinding.getParamsMap().put("role", "F1211");
operationBinding.getParamsMap().put("Connection", "JDBC");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
i hope it help you
thanks

Oo transaction with parameters

Similar Messages

Maybe you are looking for