OPA Launch taking some time

Hi All,
We have encountered a strange problem during launch form for OPA using Siebel data adapter. The launch form of OPA takes lot of time around 15 to 20 minutes sometimes. but If we bounce SR broker of Siebel this time reduces to 5 to 8 seconds. After some time of continuous use we3 again see the time interval rising and it is only after the SR broker bounce this time reduces looking at the log it seems Siebel becomes slow and it takes a huge time to send back across the web service response.
Thanks,
Kunal Sharma

This must have something to do with Siebel starting up inbound web services. When you start web determinations with data pre-seeded from Siebel. OPA must call back to an Inbound web service in siebel to get the data.
If the inbound web service is not responding correctly this can take some time.

Similar Messages

HT2711 I used the "repair disk utility" to see why my computer is running slow but it gives me an error message saying, "disk utility can't repair this disk, and restore your backed up files. My computer was running slow and taking some time to load page

I haven't used my computer in a month, so when I turned it on, I saw it was running slow. The circle that is used to load the page kept coming up and it took sometime for things to load up. I tried to go Into safe mode, and it worked, but I know your limited on what you can do in that world. I also tried to repair the disk but it kept giving me an error message. How can I resolve this problem?

Time Machine is a back up you have to set up to back up before there is a problem like a hard drive failure.
It is possible to recover files from a failed drive, but it is an expensive proposition.
There is a faint hope that an app like Disk Warrior or TechTool Pro might repair the drive. You could try making an appointment at an Apple store and ask a technician there to take a look... the diagnosis will not cost you.
http://www.apple.com/retail/geniusbar/

On launching firfox v3.6.15 on windows vista this error message 'Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsBlocklistService.js:648' is shown, after some time FF stops responding.

I've noticed that it is taking longer for Firefox to start. On launching the apps I get this message ' I've noticed that it is taking longer and longer for Firefox (always the most up-to-date version) to start. After some time FF stops responding

Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue.

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue. Waiting for your reply.

Hi sb00349044,
I'm sorry to hear that you are having problems with your Firefox OS device. Can you please specify the device Model and Version?
If your device is one of the Firefox OS Tablets from the contribution program, please be aware that those builds are still being improved and ironed out. If that is the case, please follow the guidelines for the contributor program to report issues with the device.
Thanks,
- Ralph

LR6 wait for some time hoping to launch as soon as D750 can not connect!

LR6 wait for some time hoping to launch as soon as D750 can not connect!

RAW is supported for D750 in versions later as 5.7
I suppose tethering will be added with next version, which probably is LR6.

Refresh document call in RESTful workflow is taking long time.

Hi,
I am facing an issue with the Refresh Document step, in Raylight Workflow using RESTful API.
We are using this Refresh Document call, To make the dataprovider mappings formed.
For few WEBI documents, this Refresh document step is taking much time to complete. After some investigation, we got to know that there are a series of SQL scripts running against actual data source, for each Refresh Document call. If the SQL script is taking much time, then the refresh document call is taking much time as well.
Up to now, we are able to solve this problem in some cases, Like below.
1. For a WEBI Document with Contexts to Answers during Refresh Document:
Ex:
Method: PUT
URI: http://localhost:6405/biprws/raylight/v1/documents/1111/parameters
Request Body: (setting default Context)
<parameters>
<parameter>
    <id>3</id>
    <answer>
      <values>
        <value id="4">Context1</value>
      </values>
    </answer>
</parameter>
</parameters>
Result: Success (No Time out Exception)
2. For a WEBI Document with some prompts to Answers during Refresh Document:
Ex:
Method: PUT
URI: http://localhost:6405/biprws/raylight/v1/documents/1111/parameters
Request Body: (With Some Dummy Values)
<parameters>
<parameter type="prompt" optional="true">
    <id>1</id>
    <answer type="Text">
      <values>
        <value id="1">Dummy Text</value>
      </values>
    </answer>
</parameter>
<parameter type="prompt" optional="true">
    <id>3</id>
    <answer type="Numeric">
      <values>
        <value id="1">0</value>
      </values>
    </answer>
</parameter>
</parameters>
Result: Success (No Time out Exception)
3. For a WEBI Document with No prompts and No Contexts to Answers during Refresh Document:
Ex:
Method: PUT
Request Body: (Empty)
Result: Time Out Exception (from my C# code)
Only In this scenario (3) i am facing issue, As I have no answers to set any default values to Parameters. So the SQL scripts are executing. Due to this, if there is any time taking scripts, then the Refresh document step is taking much time or even throwing Time out exception from my C# code. I tried by increasing the timeout for WebRequest in C#, But still not solved.
For creation of a WEBI document, Can we skip the SQL scripts, running in Refresh Document API call?
If yes, then please let me know your valuable ideas to solve my problem.
Please let me know for more information.
Thanks in advance.
Thanks,
Mahendra

Hi Anthony,
Yes, I tried creating same WEBI Document using Web Intelligence Rich Client and also using Web Intelligence from BI Launch Pad.
On both WEBI Clients I am able to create the same WEBI Document, which I am trying to create using RESTful API.
My observations are like below:
Observation 1: After selecting required Result Objects/columns in Query Panel, by clicking on Close -> Apply Changes and Close button, I can create the WEBI Document and Save it successfully.
Observation 2: After selecting required Result Objects/columns in Query panel, If I click on Run Query, It is taking much time to bring fresh data.
Just like in my first observation, I am only looking for creating WEBI Documents successfully, without bringing fresh data. It is enough for me, If I can create the WEBI documents from RESTful API successfully. Here I am not looking for any fresh data from this Refresh Document step, except the dataprovider mappings.
As mentioned in my previous reply, Without dataprovider mappings, we are unable update Report Specification. For this, to make the dataprovider mappings formed, we are using this Refresh Document step, After updating dataprovider specification
Is this Refresh Document call required in Workflow?
Please suggest me if any other REST API Call, that I can use to get the dataprovider mappings formed, other than Refresh Document step.
Thanks in advance. Currect me if I am wrong.
Thanks,
Mahendra

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

F4 Help is taking long time

Hi All,
We are working on BI 7.0. version
In the varaible pop-up screen we have two info objects.
1. Fiscal year Period
2. JOA(Joint operating aggriment)
If u press F4 for JOA, it is taking long time to execute and finally the application is getting closed.same situation is there in RSRT also.
If i enter with out JOA the query is giving the output. Here i have to restrict the query by JOA.
i have changed the JOA peroperties in query designer.
Query execution for filter value selection = Values in master data table.......
but still the situation is the same.......
Could you please suggest any solution for this.....
Thanks & Regards,
PK

Hi Kamal,
You can set that at the query level in the query designer for each query.
1. Select the corresponding characteristic in the query designer.
2. Goto to the "Extended tab" in the properties
3. Select the "Values in the Master data table" in the "Query execution in the filter value selection.
Also see some recomendations:
Note 748623 - Input help (F4) has a very long runtime - recommendations
Hope this helps.
CK

RSPCM is taking long time

Hi,
RSPCM is taking long time to open at the same time RSPC is working fine
when I try to change the process chain status through RSPC_PROCESS_FINISH . it is executing for long time no response. I tried executing it backgrond also from past 2 days it is running, no progress.
Our basis team created index to all backend table of RSPCM, still issue persist. Please suggest me some to get rid of this.
Br,
Harish

hi,
Please check the below thread
RSPCM T-Code was executing very slow
Please check note 1372931
hope it helps!
Edited by: Lavanya J on Nov 4, 2011 1:32 PM

VB Macro in Bex Analyser is taking long time to complete execution

Hi Experts,
In a FI query , we have a VB macro which update the excel sheets by taking values from the previous excel sheets .
The issue is its taking long time for query execution and if we are keep on pressing 'ENTER' button . The query is running very fastly and is giving the results ,but its not a correct way to do.
Its a critical issue in Production and can anyone help me to resolve the issue.
Regards,
Anju

Hi Anju,
I need to create a VB macro in one of my query but i not familiar how i can plug the VB code into the query.
Please can you give me some basic procedure on how to do that?
What i need to do exactly is to bring a KF from a query into another query. Not sure if this is possible using VB.
Let me know.
Thanks.
Cesar

Retry recovery action is taking long time to complete

Hi,
I am in the process of testing error handling for my BPEL process.
As part of it, I have given the default recover action in the fault policy of the process as retry with a retry count of 3 times with retry interval as 2.
To test this, i have changed the target end point uri of the target service to some invalid url and ran the process.
First I was not able to find the BPEL process instance at all in the console.
Later I was able to find the instance after half an hour. When I saw the instance, if retry had happened or not.
I found that the retry happened for 3 times, but it took 30 mins for the first retry to complete and start the second retry.
Can anyone please let me know why the retry is taking long time although the retry interval I gave is only 2 seconds.
THanks in advance!!!!

Hi,
Please find below the fault policy file:
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicy version="2.0.1" id="TestFaultPolicy" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <Conditions>
     <faultName>
     <condition>
     <action ref="aia-ora-retry"/>
     </condition>
     </faultName>
     </Conditions>
     <Actions>
          <Action id="aia-ora-retry">
               <retry>
                    <retryCount>3</retryCount>
                    <retryInterval>2</retryInterval>
                    <exponentialBackoff/>
                    <retryFailureAction ref="aia-ora-java"/>
                    <retrySuccessAction ref="aia-ora-java"/>
               </retry>
          </Action>
          
          <Action id="ora-replay-scope">
               <replayScope/>
          </Action>
          
          <Action id="ora-rethrow-fault">
               <rethrowFault/>
          </Action>
          
          <Action id="ora-human-intervention">
               <humanIntervention/>
          </Action>
          
          <Action id="ora-terminate">
               <abort/>
          </Action>
          <Action id="aia-ora-java">
          <javaAction className="oracle.apps.aia.core.eh.BPELJavaAction" defaultAction="ora-rethrow-fault">
          <returnValue value="REPLAY" ref="ora-terminate"/>
          <returnValue value="RETRHOW" ref="ora-rethrow-fault"/>
          <returnValue value="ABORT" ref="ora-terminate"/>
          <returnValue value="RETRY" ref="aia-ora-retry"/>
          <returnValue value="MANUAL" ref="ora-human-intervention"/>
          </javaAction>
</Action>
     </Actions>
</faultPolicy>

Master Dataload is taking long time to complete

Hi
In last couple of weeks, we are experience the delay for master dataload job. These dataload should take 5-8 minute to complete but it is taking more then 5 hour to complete. here we are using process chain for master dataload.
Any idea? We don't understand where to start to check the root cause of this problem.
Regards
Amar

Hi Freinds
Some update of our master dataload. Still not resolved.
Seem to me, our problem is related to Hierarchy in BW server.It is taking long time to update the hierarchy in BW server. As i told you, problem occur only when loading master dataload. For transaction dataload, no IDOC get stuck in R/3 (NPR) server. There are enough resources in both R/3 and BW server for trfc.
There are total 9 hierarchy in the master dataload that is delaying in the process for update. If you have seen this type of problem for the following hierarchy, pls update me.
A     0ACCOUNT (InfoSource)
     Hierarchy
1     Fin statement vers FSV5
2     Cost Element by fun area
B     0COSTCENTER (InfoSource)
     Hierarchy
3     Mitel Network
4     NA MNS Total
5     CEO
6     Global Support Cost center
C     0COORDER (infosource)
     Hierarchy
7     Total R&D (Ron Wellard)
8     RD YRD1
9     RD YRD2
Regards
Amarjit

This part of query is taking long time to run, its about 40 minutes. Can anyone help wit it.

------Load Dataset into Temp table---------------
SELECT
z.SYSTEMNAME
--,Case when ZXC.[Subsystem Name] <> 'NULL' Then zxc.[SubSystem Name]
--else NULL
--End AS SubSystemName
, CASE
WHEN z.PROV_TAX_ID IN
(SELECT DISTINCT zxc.TIN
FROM dbo.SQS_Provider_Tracking zxc
WHERE zxc.[SubSystem Name] <> 'NULL'
THEN
(SELECT DISTINCT [Subsystem Name]
FROM dbo.SQS_Provider_Tracking zxc
WHERE z.PROV_TAX_ID = zxc.TIN)
End As SubSYSTEMNAME
,z.PROVIDERNAME
,z.STATECODE
,z.PROV_TAX_ID
,z.SRC_PAR_CD
,SUM(z.SEQUEST_AMT) Actual_Sequestered_Amt
, CASE
WHEN z.SRC_PAR_CD IN ('E','O','S','W')
THEN 'Nonpar Waiver'
--**Amendment Mailed**
--WHEN z.PROV_TAX_ID IN
When EXISTS
(SELECT DISTINCT b.PROV_TIN
FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
where not exists (select * from dbo.sqs_objector_TINs t where b.PROV_TIN = t.prov_tin))
THEN
(SELECT DISTINCT b.Mailing
FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
WHERE z.PROV_TAX_ID = b.PROV_TIN
-- --**Amendment Mailed Wave 3 and 4**
--WHEN z.PROV_TAX_ID In
When EXISTS
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz WITH (NOLOCK )
where qz.Mailing = 'Amendment Mailed (3rd Wave)'
and not exists (select * from dbo.sqs_objector_TINs t WITH (NOLOCK ) where qz.PROV_TIN = t.prov_tin))
THEN 'Amendment Mailed (3rd Wave)'
WHEN EXISTS
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz WITH (NOLOCK )
where qz.Mailing = 'Amendment Mailed (4th Wave)'
and not exists (select * from dbo.sqs_objector_TINs t WITH (NOLOCK ) where qz.PROV_TIN = t.prov_tin))
THEN 'Amendment Mailed (4th Wave)'
-- --Is Puerto Rico of Lifesynch
WHEN EXISTS
(SELECT DISTINCT a.PROV_TAX_ID
FROM PACT.dbo.SQS_NonPar_PR_LS_TINs a WITH (NOLOCK )
WHERE a.Bucket <> 'Nonpar'
THEN
(SELECT DISTINCT a.Bucket
FROM PACT.dbo.SQS_NonPar_PR_LS_TINs a WITH (NOLOCK )
WHERE a.PROV_TAX_ID = z.PROV_TAX_ID)
-- --**Top Objecting Systems**
WHEN z.SYSTEMNAME IN
('ADVENTIST HEALTH SYSTEM','ASCENSION HEALTH ALLIANCE','AULTMAN HEALTH FOUNDATION','BANNER HEALTH SYSTEM','BERT FISH MEDICAL CENTER','BETHESDA MEMORIAL HOSPITAL','BJC HEALTHCARE','BLOUNT MEMORIAL HOSPITAL','BOCA RATON REGIONAL HOSPITAL','CAROMONT HEALTH SYSTEM','CATHOLIC HEALTH INITIATIVES','CATHOLIC HEALTHCARE PARTNERS','CHRISTUS HEALTH',/*'CLEVELAND CLINIC HEALTH SYSTEM',*/'COLUMBUS REGIONAL HEALTHCARE SYSTEM','COMMUNITY HEALTH SYSTEMS, INC','COXHEALTH','HCA','HEALTH MANAGEMENT ASSOCIATES','HUNTSVILLE HOSPITAL HEALTH SYSTEM','INTEGRIS HEALTH','JUPITER MEDICAL CENTER','LEE MEMORIAL HEALTH SYSTEM','MARTIN MEMORIAL HEALTH SYSTEM','MERCY','MT SINAI MEDICAL CENTER (MIAMI)','MUNROE REGIONAL MEDICAL CENTER','NORMAN REGIONAL HEALTH SYSTEM','NORTHSIDE HEALTH SYSTEM','SHANDS HEALTHCARE','SISTERS OF MERCY - SPRINGFIELD, MO','SSM HEALTH CARE','ST LUKES HEALTH SYSTEM','SUMMA HEALTH SYSTEM','SUSQUEHANNA HEALTH SYSTEM','TBD -- TRINITY HEALTH - CATHOLIC HEALTH EAST','UNIVERSITY OF MISSOURI HEALTH SYSTEM','UNIVERSITY OF NEW MEXICO HOSPITALS','UNIVERSITY OF UTAH HEALTH CARE')
THEN 'Top Objecting Systems'
WHEN EXISTS
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Top Objector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
THEN 'Top Objecting Systems'
-- --**Other Objecting Hospitals**
WHEN EXISTS
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Objector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
THEN 'Other Objecting Hospitals'
-- --**Objecting Physicians**
WHEN EXISTS
(SELECT z.PROV_TAX_ID
FROM SQS_EDW_Source z WITH (NOLOCK)
WHERE EXISTS
(SELECT DISTINCT
obj.TIN
FROM SQS_Provider_Tracking obj WITH (NOLOCK )
WHERE obj.[Objector?] in ('Objector','Top Objector')
and z.PROV_TAX_ID = obj.TIN
and z.LCLM_RSTMT_TREND_CAT_CD not IN ('HO','HI')
THEN 'Objecting Physicians'
--****Rejecting Hospitals****
WHEN EXISTS
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN SQS_Provider_Tracking obj WITH (NOLOCK )
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Rejector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
THEN 'Rejecting Hospitals'
--****Rejecting Physciains****
WHEN EXISTS
(SELECT obj.TIN
FROM SQS_Provider_Tracking obj WITH (NOLOCK )
WHERE z.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Rejector')
and z.LCLM_RSTMT_TREND_CAT_CD NOT IN ('HO','HI')
THEN 'REjecting Physicians'
----**********ALL OBJECTORS SHOULD HAVE BEEN BUCKETED AT THIS POINT IN THE QUERY**********
-- --**Non-Objecting Hospitals**
WHEN EXISTS
(SELECT DISTINCT
h.PROV_TAX_ID
FROM
#HIHO_Records h WITH (NOLOCK )
WHERE
(z.PROV_TAX_ID = h.PROV_TAX_ID)
OR h.SMG_ID IS NOT NULL
)and z.LCLM_RSTMT_TREND_CAT_CD IN ('HO','HI')
THEN 'Non-Objecting Hospitals'
-- **Outstanding Contracts for Review**
WHEN EXISTS
(SELECT qz.PROV_TIN
FROM
[PACT].[HUMAD\ARS3766].[SQS_Mailed_TINs] qz WITH (NOLOCK )
where qz.Mailing = 'Non-Objecting Bilateral Physicians'
AND z.PROV_TAX_ID = qz.PROV_TIN)
Then 'Non-Objecting Bilateral Physicians'
When EXISTS
(select
p.prov_tax_id
from dbo.SQS_CoC_Potential_Mail_List p WITH (NOLOCK )
where p.amendmentrights <> 'Unilateral'
AND z.prov_tax_id = p.prov_tax_id)
THEN 'Non-Objecting Bilateral Physicians'
WHEN EXISTS
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz WITH (NOLOCK )
where qz.Mailing = 'More Research Needed'
AND qz.PROV_TIN = z.PROV_TAX_ID)
THEN 'More Research Needed'
WHEN EXISTS (SELECT qz.PROV_TIN FROM [SQS_Mailed_TINs] qz WITH (NOLOCK ) where qz.Mailing = 'Objector' AND qz.PROV_TIN = z.PROV_TAX_ID)
THEN 'ERROR'
else 'Market Review/Preparing to Mail'
END AS [Updated Bucket]
,COALESCE(q.INDdesc, f.IND_desc) AS INDdesc
,f.Time_Period_for_Dispute
,f.Renew_Term_Ind
,f.Renewal_Date
,z.SMG_ID
,'' AS OrderedRank
INTO SQS_Bucketed_Details_SMG_on_SMGXXX
From #SQS_EDW_SOURCE_WithSMG z
left join #F f ON f.PROV_TAX_ID = z.PROV_TAX_ID
AND z.SYSTEMNAME = f.SYSTEM_NAME
AND z.PROVIDERNAME = f.Provider
Left join #Q q ON z.PROV_TAX_ID = q.TIN
GROUP BY z.SYSTEMNAME
--,Z.[SubsystemName]
,z.PROVIDERNAME
,z.STATECODE
,z.PROV_TAX_ID
,z.SRC_PAR_CD
,q.INDdesc
,f.IND_Desc
,f.Time_Period_for_Dispute
,f.Renew_Term_Ind
,f.Renewal_Date
,z.SMG_ID
,z.LCLM_RSTMT_TREND_CAT_CD
As I am a developer I do not have the access to Sql profiler or tuning agent to optimize my query, I have used some joins over the temp table #HIHO which indeed pulling the records from table EDW_Source which has 5 million records, I also added Non clustered
indexes on prov_ID, SMG_ID and Incurred month for this table, but still it is taking longer time. Need help

Hi, It needs some more tweaks but pls try this one
USE
Go
--****Create sqs_objector_TINs (Objections and Rejections)****
--Drop table .dbo.sqs_objector_TINs
select distinct a.TIN as Prov_TIN
Into #sqs_objector_TINs
from .dbo.sqs_provider_tracking as a with (nolock)
where a.[Objector?] in ('Top Objector','Objector','Rejector')
/*********** Query for SQS_TINtoSyst***********/
--DROP TABLE .dbo.SQS_TINtoSystem
select distinct
b.SRC_PROV_ID
--,case
-- when a.SYSTEM_NAME is null
-- then
-- case
-- when a.CTRCT_GRP_NAME is null
-- then a.PROV_SMG_NAME
-- else a.CTRCT_GRP_NAME
-- end
-- else a.SYSTEM_NAME
--end as SYSTEM_NAME
,COALESCE(a.SYSTEM_NAME, a.CTRCT_GRP_NAME, a.PROV_SMG_NAME) AS SYSTEM_NAME
INTO #SQS_TINtoSystem
from
PARE.dbo.EDW_PROD_HOSPITAL_MASTER a with (nolock)
Inner Join PARE.dbo.EDW_PROD_HOSPITAL_ID_XREF b with (nolock)
on a.SMG_ID = b.SMG_ID
-- Inner Join .dbo.SQS_EDW_Source q
--on b.SRC_PROV_ID = q.PROV_TAX_ID
where b.SRC_PLATFORM_CD = 'TX'
and exists
select
SMG_ID
from PARE.dbo.EDW_PROD_HOSPITAL_ID_XREF as t1 with (nolock)
where SRC_PLATFORM_CD = 'TX'
and exists (select q.PROV_TAX_ID from .dbo.SQS_EDW_Source q with (nolock) where q.PROV_TAX_ID = b.SRC_PROV_ID)
and a.SMG_ID = t1.SMG_ID
/************** Query for SQS_Bucketed_Details_SMG*****************/
DROP TABLE .dbo.SQS_Bucketed_Details_SMG
--Create temp table
SELECT z.SYSTEMNAME
,Z.PROV_TAX_ID
,z.PROVIDERNAME
,z.STATECODE
,z.SRC_PAR_CD
,z.SEQUEST_AMT
,case when Z.LCLM_RSTMT_TREND_CAT_CD IN ('HI','HO') Then 'H' else 'P' end as Hosp_Ind
,Z.SMG_ID
INTO #SQS_EDW_SOURCE_WithSMG
FROM dbo.SQS_EDW_SOURCE_WithSMG z with (nolock)
WHERE (Z.Incurred_Mth >= convert(datetime,'01/01/2013')) and (Z.Incurred_Mth < convert(datetime, '1/1/2014'))
--between convert(datetime,'01/01/2013') and convert(datetime, '12/31/2013 23:59:59.996')
--YEAR(Z.Incurred_Mth)=2013
-- Create Temp table Q
select
x.TIN,
case when max(x.IND) = 'NYN'
then 'Standard'
when max(x.IND) = 'YNN'
then 'Express'
when max(x.IND) = 'NNY'
then 'Non_Standard' else 'Mixed'
end as INDdesc
Into #Q
FROM
(SELECT
a.tin,
MAX(a.express) + MAX(a.StandardInd) + MAX(NonstandardIND) as IND
from
(select r.TIN,
case when MAX(r.Express) like 'Y%' then 'Y' else 'N' end As Express,
case when MAX(r.Standard) = 'Y' then 'Y' else 'N' end As StandardInd,
case when MAX(r.[Non-Standard]) = 'Y' then 'Y' else 'N' end AS NonstandardIND
FROM DBO.SQS_Objectors_01032014 r with (nolock)
GROUP BY r.TIN) a
group by a.TIN) x
group by x.TIN
--Create Temp table F
Select *
INTO #F
FROM(
SELECT distinct g.prov_tax_id
,g.system_name
,g.provider
,case when g.reimburse_mixed = 'Y' then 'Mixed'
when g.reimburse_express = 'Y' then 'Express'
when g.reimburse_standard = 'Y' then 'Standard'
when g.reimburse_NonStandard = 'Y' then 'NonStandard'
end as IND_Desc
,g.Time_Period_for_Dispute
,case when g.Renewal_Date = 'N' and g.Expiration_Date = 'N'
then 'Unclear'
when g.Renewal_Date = 'N' and g.Expiration_Date <> 'N'
then 'Termination'
when g.Renewal_Date <> 'N' and g.Expiration_Date = 'N'
then 'Evergreen'
when g.Renewal_Date <> 'N' and g.Expiration_Date <> 'N'
then 'Termination'
else 'Unknown'
end as 'Renew_Term_Ind'
,g.Renewal_Date
FROM
(select distinct
bb.PROV_TAX_ID1 as prov_tax_id
,aa.*
from
[dbo].[Top_600_Hospitals3] aa with (nolock)
left join pare.dbo.EDW_PROD_HOSPITAL_MASTER bb with (nolock)
on --a.CTRCT_GRP_NAME = b.CTRCT_GRP_NAME
aa.Provider = bb.PROV_SMG_NAME
-- and (a.SYSTEM_NAME = b.SMG_SYS_NAME or a.SYSTEM_NAME = b.SYSTEM_NAME)
--and a.ADDR_LINE1 = b.ADDR_LINE1
and aa.STATE_CD = bb.STATE_CD
--and a.ZIP_CD = b.ZIP_CD
and aa.City1 = bb.CITY_NAME
where aa.SYSTEM_NAME <> 'SEE ABOVE') g
where g.system_name <> 'SEE ABOVE') h
where h.ind_Desc is not null
SELECT DISTINCT z.PROV_TAX_ID
, z.SMG_ID
INTO #HIHO_Records
FROM SQS_EDW_SOURCE_WithSMG z with (nolock)
WHERE z.LCLM_RSTMT_TREND_CAT_CD IN ('HO', 'HI')
AND Z.Incurred_Mth >=convert(datetime, '1/1/2013') and Z.Incurred_Mth <convert(datetime, '1/1/2014')
--YEAR(Z.Incurred_Mth)=2013
---------------------------------Load Dataset into Temp table---------------
SELECT
z.SYSTEMNAME
--,Case when ZXC.[Subsystem Name] <> 'NULL' Then zxc.[SubSystem Name]
--else NULL
--End AS SubSystemName
, CASE
WHEN z.PROV_TAX_ID IN
(SELECT zxc.TIN
FROM dbo.SQS_Provider_Tracking zxc with (nolock)
WHERE zxc.[SubSystem Name] <> 'NULL'
THEN
(SELECT top 1 [Subsystem Name]
FROM dbo.SQS_Provider_Tracking zxc with (nolock)
WHERE z.PROV_TAX_ID = zxc.TIN)
End As SubSYSTEMNAME
,z.PROVIDERNAME
,z.STATECODE
,z.PROV_TAX_ID
,z.SRC_PAR_CD
,SUM(z.SEQUEST_AMT) Actual_Sequestered_Amt
, CASE
WHEN z.SRC_PAR_CD IN ('E','O','S','W')
THEN 'Nonpar Waiver'
-- --Is Puerto Rico of Lifesynch
WHEN z.PROV_TAX_ID IN
(SELECT a.PROV_TAX_ID
FROM .dbo.SQS_NonPar_PR_LS_TINs a with (nolock)
WHERE a.Bucket <> 'Nonpar'
THEN
(SELECT top 1 a.Bucket
FROM .dbo.SQS_NonPar_PR_LS_TINs a with (nolock)
WHERE a.PROV_TAX_ID = z.PROV_TAX_ID)
--**Amendment Mailed**
WHEN z.PROV_TAX_ID IN
(SELECT b.PROV_TIN
FROM dbo.SQS_Mailed_TINs_010614 b WITH (NOLOCK )
where not exists (select * from dbo.sqs_objector_TINs t with (nolock) where b.PROV_TIN = t.prov_tin))
and z.Hosp_Ind = 'P'
THEN
(SELECT top 1 b.Mailing
FROM dbo.SQS_Mailed_TINs_010614 b with (nolock)
WHERE z.PROV_TAX_ID = b.PROV_TIN
-- --**Amendment Mailed Wave 3-5**
WHEN z.PROV_TAX_ID In
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz
where qz.Mailing = 'Amendment Mailed (3rd Wave)'
and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
and z.Hosp_Ind = 'P'
THEN 'Amendment Mailed (3rd Wave)'
WHEN z.PROV_TAX_ID IN
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz
where qz.Mailing = 'Amendment Mailed (4th Wave)'
and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
and z.Hosp_Ind = 'P'
THEN 'Amendment Mailed (4th Wave)'
WHEN z.PROV_TAX_ID IN
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz
where qz.Mailing = 'Amendment Mailed (5th Wave)'
and not exists (select * from dbo.sqs_objector_TINs t with (nolock) where qz.PROV_TIN = t.prov_tin))
and z.Hosp_Ind = 'P'
THEN 'Amendment Mailed (5th Wave)'
-- --**Top Objecting Systems**
WHEN z.SYSTEMNAME IN
('ADVENTIST HEALTH SYSTEM','ASCENSION HEALTH ALLIANCE','AULTMAN HEALTH FOUNDATION')
THEN 'Top Objecting Systems'
WHEN z.PROV_TAX_ID IN
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Top Objector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.Hosp_Ind = 'H'
THEN 'Top Objecting Systems'
-- --**Other Objecting Hospitals**
WHEN (z.PROV_TAX_ID IN
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Objector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.Hosp_Ind = 'H')
THEN 'Other Objecting Hospitals'
-- --**Objecting Physicians**
WHEN (z.PROV_TAX_ID IN
(SELECT
obj.TIN
FROM .dbo.SQS_Provider_Tracking obj with (nolock)
WHERE obj.[Objector?] in ('Objector','Top Objector')
and z.PROV_TAX_ID = obj.TIN
and z.Hosp_Ind = 'P')
THEN 'Objecting Physicians'
--****Rejecting Hospitals****
WHEN (z.PROV_TAX_ID IN
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
INNER JOIN .dbo.SQS_Provider_Tracking obj with (nolock)
ON h.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Rejector'
WHERE z.PROV_TAX_ID = h.PROV_TAX_ID
OR h.SMG_ID IS NOT NULL
)and z.Hosp_Ind = 'H')
THEN 'Rejecting Hospitals'
--****Rejecting Physciains****
WHEN
(z.PROV_TAX_ID IN
(SELECT
obj.TIN
FROM .dbo.SQS_Provider_Tracking obj with (nolock)
WHERE z.PROV_TAX_ID = obj.TIN
AND obj.[Objector?] = 'Rejector')
and z.Hosp_Ind = 'P')
THEN 'REjecting Physicians'
----**********ALL OBJECTORS SHOULD HAVE BEEN BUCKETED AT THIS POINT IN THE QUERY**********
-- --**Non-Objecting Hospitals**
WHEN z.PROV_TAX_ID IN
(SELECT
h.PROV_TAX_ID
FROM
#HIHO_Records h
WHERE
(z.PROV_TAX_ID = h.PROV_TAX_ID)
OR h.SMG_ID IS NOT NULL)
and z.Hosp_Ind = 'H'
THEN 'Non-Objecting Hospitals'
-- **Outstanding Contracts for Review**
WHEN z.PROV_TAX_ID IN
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz with (nolock)
where qz.Mailing = 'Non-Objecting Bilateral Physicians'
AND z.PROV_TAX_ID = qz.PROV_TIN)
Then 'Non-Objecting Bilateral Physicians'
When z.prov_tax_id in
(select
p.prov_tax_id
from dbo.SQS_CoC_Potential_Mail_List p with (nolock)
where p.amendmentrights <> 'Unilateral'
AND z.prov_tax_id = p.prov_tax_id)
THEN 'Non-Objecting Bilateral Physicians'
WHEN z.PROV_TAX_ID IN
(SELECT
qz.PROV_TIN
FROM
[SQS_Mailed_TINs] qz
where qz.Mailing = 'More Research Needed'
AND qz.PROV_TIN = z.PROV_TAX_ID)
THEN 'More Research Needed'
WHEN z.PROV_TAX_ID IN (SELECT qz.PROV_TIN FROM [SQS_Mailed_TINs] qz with (nolock) where qz.Mailing = 'Objector' AND qz.PROV_TIN = z.PROV_TAX_ID)
THEN 'ERROR'
else 'Market Review/Preparing to Mail'
END AS [Updated Bucket]
,COALESCE(q.INDdesc, f.IND_desc) AS INDdesc
,f.Time_Period_for_Dispute
,f.Renew_Term_Ind
,f.Renewal_Date
,z.SMG_ID
,'' AS OrderedRank
INTO dbo.SQS_Bucketed_Details_SMG with (nolock)
From #SQS_EDW_SOURCE_WithSMG z
left join #F f ON f.PROV_TAX_ID = z.PROV_TAX_ID
AND z.SYSTEMNAME = f.SYSTEM_NAME
AND z.PROVIDERNAME = f.Provider
Left join #Q q ON z.PROV_TAX_ID = q.TIN
GROUP BY z.SYSTEMNAME
--,Z.[SubsystemName]
,z.PROVIDERNAME
,z.STATECODE
,z.PROV_TAX_ID
,z.SRC_PAR_CD
,q.INDdesc
,f.IND_Desc
,f.Time_Period_for_Dispute
,f.Renew_Term_Ind
,f.Renewal_Date
,z.SMG_ID
,z.Hosp_Ind
/************************** Drop temp tables*********************/
--DROP TABLE #SQS_EDW_SOURCE_WithSMG
--DROP TABLE #Q
--DROP TABLE #F
--DROP TABLE #HIHO_Records
--DROP TABLE #SQS_TINtoSystem
--DROP TABLE #SQS_EDW_SOURCE_WithSMG
--DROP TABLE #sqs_objector_TINs

Adobe Premiere Pro CC launches for some users, but crashes for others.

I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
For these students, the following error appears:
Adobe Premiere Pro CC has stopped working
Check Online for a solution and close the program (Tried this nothing seems to come of it)
Close the program
I clicked View problem details
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: dvaui.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532bed86
Exception Code: c0000005
Exception Offset: 00000000002d31c1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 3272
Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
Additional Information 3: 3e22
Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
-Barb

I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

OPA Launch taking some time

Similar Messages

Maybe you are looking for