Open file with reference

Hi
I want to open files with a reference in hidden mode. Is this possible?
Because I want to make a program where the user can choose a new test station and then the controls and indicators will be created (or become visible) and the subroutine begins to run.
Does anybody have a good idea or even an example how to do this?
Best regards,
Yves

Hi Yves,
You could control your Test- VI with a global variable as shown below. This solution uses two independent while- loops. The Test-VI won't be opened and does the work invisible.
This is the Main-VI
And this is the Test-VI
Greets, Dave
Message Edited by daveTW on 09-28-2006 03:30 PM
Greets, Dave
Attachments:
Test VI.png ‏2 KB
Control VI.llb ‏31 KB
Main VI.png ‏7 KB

Similar Messages

Error opening file/URL reference by alias and Administrative limit exceeded

Hello All,
Problem:
SMTP Error: 4.5.0 error opening file/URL reference by alias
and
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
Here is my configuration:
Windows 2000 server (without Active Directory)
SP4
Iplanet Messaging Server 5.2
Netscape Directory Server 4.16
IPlanet Messaging Server 5.2 Hotfix 1.09 (built Jan 7 2003)
We have a group which we use to flash messages to all the users of the mail server. Till last week it was working fine but now I am not able to send messages to this group <group-name>.
There are around 800 (Eight Hundred) E-mail id the messaging server and the flashed message is supposed to go to all 800 + users.
Note: I have another group of 300 users and I am able to send an E-mail to this group of 300 users.
I am using Dynamic Group for Members list.
The error message I get while trying to send message to this group is
SMTP Error: 4.5.0 error opening file/URL reference by alias.
The corresponding error in mail.log file is
30-Jan-2004 10:55:21.40 41c.7e4.1098 tcp_intranet J 0 <group-name>@domain rfc822; <group-name>@domain domain (localhost [127.0.0.1]) 452 4.5.0 error opening file/URL referenced by alias: <group-name>@domain
Now when I construct and Test the LDAP URL from Console, the error I get is:
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
I have increased the various limits but I still get the same error when I send mail to that group or do a LDAP Test:
The deafult and new limits are:
Sizelimit: Default 2000 New 10000
Timelimit Default 3600 New 3600
Lookthroughlimit Default 5000 New 6000
The corresponding error entry in access log of slapd is:
30/Jan/2004:12:19:26 +051800] conn=34 op=213 RESULT err=11 tag=101 nentries=0 etime=2 notes=U
My search for Administrative limit problem and error opening file/URL error in Sun forum and other groups did get some hits but that did not solve my problem.
I will appreciate any suggestion/comments.
Thanks and Regards,
Maneesh Bisht

Thanks Jay.
My problem has been fixed.
Your suggestion was to increase the lookthrough limit. As you would have noticed in my posting that I had increased this limit to 6000 but that did not solve my problem. Today I increased this limit to 10000. And after that I did not get "administrative limit exceeded" error. Also I do not get "error opening file/URL reference by alias" error while sending E-mail to a particular group of 800+ ids.
Regards,
Maneesh Bisht

Dreamweaver very slow when opening files with external links

Is there any way to fix Dreamweaver CS5 (Windows 7, 64bit) when opening files with external references?
For example, I have a very simple CSS file, and toward the top the file has a line that says:
@import url("https://fonts.googleapis.com/css?family=Ubuntu:500,700");
This causes the file to take around 20 seconds to open in DW. If I comment out the line or remove it, the file opens almost instantly. This behaviour is also present in files that contain an SSI.
DW often crashes before being able to open the file and I need to restart the app.
Can I disable DW from attempting to load the references?? It's obviously what is causing the issue IMO and would love to make DW workable again!

"Enable Related Files" isn't the fix for this issue. It's slightly different - I wanted to still load related files, but only the ones local to the file I was editing.
The fix was to use DW's Resolve To IP Address feature. It required adding a registry value - it fixed the issue straight away
This Adobe support doc helped: http://kb2.adobe.com/cps/887/cpsid_88742.html

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
2. select file and choose "File... Open" command-o in the Finder
3. drag file to the application icon in the Finder.
4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
To reproduce
Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
"Solution"
The file WILL open using File... Open... command-o while in InDesign application.
Rename the file or folders that have a "#" (shift-3) in the filename.
Report to Adobe if it bugs you.
This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
Untested in Panther or before and
Untested with CS3 and earlier in Snow Leaopard.
Anyone have those and want to try this... ?

In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
You need Soxy 1.0.7 from:
http://www.rorohiko.com/soxy
Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
(Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program. This problem appears after opening 4 a 5 files.

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
- Tried to Reset the preference with CTRL + Click.
- It's just new clean install didn't do anything with it yet.
- Windows 8.
Any help?

Just that one project, or any project? Can you create new projects?

Photoshop CS6 (Mac) crashes when opening files with type or using the type tool

Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Olly

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Can´t open files with camera raw

Hi!
I use Adobe Photoshop CS3 and the option to open files with Camera Raw is disabled in Bridge and in PS.
Can anyone help?

While each situation can be different this has been discussed on several threads. Scan down the list or do a search. If you can't find the answer, post a note.

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Import and export of word files with references (iPAD)

Hi,
Does Pages for iPAD supports importing and exporting of files with references generated by the prog "ENDNOTE" (http://www.endnote.com/). it s a must for grants and papers writing.
is their any way to ask the apple guys directly (new to the apple world...)
Thanks,

obsidan wrote:
Hi,
Does Pages for iPAD supports importing and exporting of files with references generated by the prog "ENDNOTE" (http://www.endnote.com/). it s a must for grants and papers writing.
Pages for iPad does not support export/import of Endnote references in the form of formatted bibliography.
is their any way to ask the apple guys directly (new to the apple world...)
Yes, indeed, feedback directly to Apple is possible
http://www.apple.com/feedback/ipad.html
While Pages does not currently import/export and preserve the Endnote formatted bibliography, another app known as Documents to go does; there is not citation software for adding references though, but preservation is good.

Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69

Developer: How can I let people open files with my program?

Hello Everyone,
I just finished my program for the Mac, and decided to make it an application.
I used Platypus to make my program into an application. Unfortunately when I try to open a file with my program (control + click on file + open with -> other), my application is grayed out and I can't select it. I see it there along with the other applications but I can't select it like I can Mail or TextEdit.
I read somewhere I had to use XCode to let people open files with my program but I have never used XCode and I have no idea how to do that. Any help would be appreciated.
Thanks,
Nick

You've posted in the wrong forum. This is the OS X Leopard Installation and Setup forum. You need to post your problem in the Developers forum. Also, since Platypus is not an Apple product, you should visit it's developers forum for assistance. The Apple Discussions is intended to assist users with problems and questions about Apple products only.
To use XCode Tools you need to install it from the Optional Installs folder on your OS X Installer Disc One. It comes with documentation. More assistance can be found at developer.apple.com.

[Flex mobile] Open file with a Filebrowser

Hi everyone,
i want to be able to open files with a file browser in my app, but the browse dialog which is opened by the File.browse() method only displays / opens music or image files. Furthermore im not even able to change the Dialog header when running my project on android:
dir.browseForOpen("Please select a file");
this doesn't work on android, neither does the next code-block:...
var dir:File=new File(File.userDirectory.url+ "/geoforms");
var filter:FileFilter=new FileFilter("Documents","*.txt");
dir.browseForOpen("Please select a file",[filter]);
So what do i have to do, to be able to show a decent file select dialog ?

Nobody any idea?
i tried it like its described in this article:
Declaring file type associations
http://livedocs.adobe.com/flex/3/html/help.html?content=File_formats_1.html
but i can't get it running for my mobile project. The type associations works fine in my desktop air application but it doesn't work in my mobile app. Is this type associations stuff supposed to be working on mobile devices / android?

Xdg-open is opening files with no extension in wine notepad

xdg-open is opening files with no extension in wine notepad. This is really annoying. How can I change it?

Click on "Browse" button at the "Open With" dialog and navigate to the location, where acrord32.exe is located. Preferebly, it should be this location "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" unless you have installed at some customized location. I'm assuming you have installed Reader 9. Once you add Adobe Reader in the open with list, it would continue to appear next time onwards.

Open file with reference

Similar Messages

Maybe you are looking for