Open PDF with Parameters has no effect if PDF is already open

Hello Users,
I try to open a PDF at a named destination. This works fine. But if the PDF is already open and I change the nameddest-Parameter, nothing happens. The Document don't jump to the new destination:
I try this on the DOS-Shell, finally I would like to open the PDF with VB.NET with "shellwait":
acrobat.exe /A nameddest=Z1 c:\temp6\Test.pdf
--> the PDF opens and jump to destination "Z1"
acrobat.exe /A nameddest=Z2 c:\temp6\Test.pdf
--> no jump to destination "Z2"
Can anybody help ?
Hagen

You can use OLE automation or DDE messages. See the document 'Interapplication Communication API Reference'.

Similar Messages

  • How to call PDF Report with parameters in jdeveloper 10.1.3

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hi ajay-9,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if iTunes is quitting unexpectedly on your PC:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    Jeremy

  • Opening a url  with parameters in an application

    I'm able to open a url in a browser from my application, but I want to open a url with parameters.
    for instanse http://mypage.asp?parameter=a
    You get a file not found. Is this possible?
    I'm currently using
    Runtime.getRuntime().exec( "cmd /C start " + url);

    Found the answer -- you have to put the url in quotes lest the ampersands parse the end off.

  • "Open with" only has Picture Viewer as default. How do I change the default to Photoshop?

    "Open with" only has Picture Viewer as default. How do I change the default to Photoshop?

    Click on edit/preferences/file type associations.  Select extension and then browse to photoshop.exe and select.

  • "When I open a link in a new tab, switch to it immediately" option has no effect on command+clicking on links.

    Whether this option is ticked or un-ticked, command+clicking a link will open the link in a new tab and immediately switch to it.
    Is it possible to change this behavior so that command+clicking on a link will open the link in a new tab in the background?

    Did you try to close and restart Firefox after toggling this setting?
    Does holding down the Shift key in addition (i.e. Command + Shift and a left-click) has any effect?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Great Video Editor That opens m4v files and has WMM effects. not imovie

    So like the title says, i need a good video editor that opens up m4v files and has similar effects to windows movie maker. I accidentely removed iMovie from my computer and now i have nothing. Please don't suggest some really expense/advanced editors. Thanks!

    Why don't you just use your install disk(s) and reinstall iMovie?

  • Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

    The broken image symbol appears in place of the images but associated web links do work ok.
    Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
    Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
    Any help appreciated.

    You only need to post a URL to your web site. We can see your code in Browser.
    So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
    You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Please help me in resolving the URL with parameters.

    Hello,
    Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
    if desformat is html or xml, the following URL is working.
    our requirement, report should be in pdf format.
    http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
    Thanks in advance,
    Usha

    We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
    The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
    There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
    If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
    -- jim

  • Calling stored procedures with parameters with the Database Connectivi​ty Toolkit

    Hi all,
    I am new to the forum and am having difficulty finding a solution to a particular problem I am having regarding using the LabVIEW Database Connectivity Toolkit on a project I am currently working on at my job.  I have a database in which I have tables and stored procedures with parameters.  Some of these stored procedures have input, output, and return parameters.
    I have been trying to follow this example but to no avail:  http://digital.ni.com/public.nsf/allkb/07FD1307460​83E0686257300006326C4?OpenDocument
    One such stored procedure I am working on implementing is named "dbo.getAllowablePNs", which executes "SELECT * from DeviceType" (DeviceType is the table).  In this case, it does not require an input parameter, it has an output parameter that generates the table [cluster], and has a return parameter which returns an integer value (execution status code) to show if an error occurred.  The DeviceType table has 3 columns; ID (PK, int, not null), PN (nvarchar(15), null), and NumMACAddresses (int, null).  I have gone over many examples and have talking to NI support to try to implement this and similar stored procedures in LabVIEW but have not been successful.  I am able to connect to the database with the Open Connection VI without error, but am running into some confusion following this step.  I am then trying to use the Create Parameterized Query VI to call the stored procedure and set the parameters.  I assume I would then use the Set Parameter Value VI for each parameter that is wired into the parameters input on the previous Parameterized Query VI?  I am also having some confusion during and following these steps as well.  I would greatly appreciate any advice or suggestions anyone might have in regards to this situation as I am not a SQL expert.  Also, I would be happy to provide any more information that would be helpful.
    Regards,
    Jon
    Solved!
    Go to Solution.

    Also, I don't know if this would be helpful but here is the actual stored procedure in SQL:
    CREATEPROCEDURE [dbo].[getLastSequenceNumber]
    @p1 nvarchar(10)='WO-00000'
    AS
    BEGIN
    -- SET NOCOUNT ON added to prevent extra result sets from
    -- interfering with SELECT statements.
    SETNOCOUNTON;
    -- Insert statements for procedure here
    selectmax(SequenceNumber)from Devices where WorkOrderNumber= @p1
    END
    GO

  • SSRS cube report with parameters...and more

    Hi,
    I have created some basic SSRS reports in the past with parameters, but I was just given the following project by my manager and I would like to find out 2 things:
    1.  Can this be accomplished using SSRS
    2.  If yes, what are the High-Level steps needed to get this accomplished
    First off, the SSRS report(s) will be connecting to an SSAS cube, so there will be some MDX involved.  The cube is fairly simple, 1 measure group and 3 dimensions.
    The main piece of this project will be 4 parameters that will be displayed to the user; Quarter, Division, Operations, and ReportList.
    The Quarter is just the Quarter that the user wants to run the report for (Q1-2012, Q1-2013, etc..).  This will come from the Date Dimension  The Division will be a list of all of our internal divisions that we have setup in our Client Dimension
    table (Eastern Division, Western Division, etc...).  The Operations will be list of operations for each division selected in the Division parameter (Boston Ops, NY Ops, etc...).  This list will also come from the Client Dimension.  The ReportList
    will be a list of all reports that are related to the Division and Operations Selected.  For example, Eastern Division and Boston Ops could have 3 reports, Western Division and San Francisco Ops has 5 reports, etc...
    The final piece to this is that when the user selects the reports to be generated, they will have to be created into 1 report.  This way the user can convert the report to 1 single PDF file or print the report.  So if 3 reports were selected, each
    report would be a separate page and could then be converted to a single PDF file or printed.
    I know that SSRS has the ability to create cascading parameters, so that should take care of dynamically generating the Operations parameter drop down as well as the REportList drop down.  Of course, using MDX to accomplish this will tricky since I
    haven't done much with MDX.
    I guess my last concern is how to generated multiple reports given the parameters selected and have them be combined into 1 report?  I was thinking subreports, but not sure if that would work.
    Any feedback or concerns/ideas on how this can be accomplished using SSRS?
    **Using SSRS 2012
    thanks
    Scott

    Do you have a question? The title doesn't provide sufficient information what you are after.

  • Change of Min Pool Size has no effect?

    Hi, we are still using odp 9.2.0.4 on windows server 2003 webserver and oracle database 9i on Sun solaris. Recently we discovered a problem using Min Pool Size = 1, it seems that if new connections are required we sometimes get a connection timeout. So we decided to set Min Pool Size = 30, and on the testserver this works fine. In the odp tracefile (tracelevel=2) you see the 30 connections building up immediately. But on the production server we see no difference, it looks like the (new installed, application pool reset) application still uses the Min Pool Size = 1 setting.
    The connection string is build up in application code. On the testserver it was sufficient to stop and start the website and its application pool, on the production server this has no effect.
    Does anyone have an idea what the problem is??? We also tried restarting the IIS server, that did not help either. In production there are more applications using ODP.
    Regards, Paul.

    What problem are you trying to solve at this point? Simply "why is odp not tracing?" The only suggestions I really have there are
    1) make sure you restart the app after enabling tracing parameters
    2) make sure the directory you've set tracing to is open as far as permissions
    3) make sure you've set tracing in the right registry setting if you have multiple versions of ODP installed
    4) if you're trying to write to c:\ root, try creating and pointing to a different (c:\odptrace for example) directory instead.
    Hope it helps,
    Greg

  • DKACB-XERGO Assignment to a profitability segment has no effect for account

    Hi,
    I have a batch input (FB01) in error for this message:
    Assignment to a profitability segment has no effect for account XXXXXXXXXX
    This account is not to opened as cost element...and this is correct.
    If I process batch input in foreground, I notice that field 'Profit. Segment'
    (DKACB-XERGO) is flagged.
    How Can I unflag this field?
    Where 'Profit. Segment' is customized?
    Thanks,
    Marco

    I am wondering what is behind the batch input or what process is used  to do that. For e.g, when I tried entering FB01 transaction with a pure G/L account (it has no cost element) and  clicked on the profitability segment icon, I got the same message what you got.
    So could it be possible that batch input goes through the 'Detail screen for profitability segment' though it may not be required?

  • Media Keys Recognized Correctly Using Xev but pressing has no effect.

    On g15 keyboard Xev maps the multimedia keys correctly
    (KeyPress event, serial 35, synthetic NO, window 0x5600001,
        root 0x10c, subw 0x0, time 5432517, (160,-5), root:(1123,826),
        state 0x0, keycode 172 (keysym 0x1008ff14, XF86AudioPlay), same_screen YES,
        XKeysymToKeycode returns keycode: 162
        XLookupString gives 0 bytes:
        XmbLookupString gives 0 bytes:
        XFilterEvent returns: False
    but Clementine doesn't react when the key is pressed.
    I don't know what changes but rebooting can fixes / creates the problem randomly.

    *vitali* wrote:I have kde 4.5.0 , and I am not messing with xev merely checking that the keys are detected correctly.
    I have  g15daemon , g15composer, g15macro, g15stats, libg15, lib15render installed.
    The media keys are detected when setting them in the global shortcut for clementine, but pressing them has no effects (works on some reboots as i mentioned).
    Hmmm....G15 media keys works out-of-the-box for Amarok.  I can experiment on my box once I'm through with work in a few hours.
    Looking at the Clementine bugtracker-there's an open bug regarding multimedia keys on Win7 and Clementine already.  I'll play later-but I'm thinking this is something to post on their bug tracker.

Maybe you are looking for