Open purchase order only with open production or maintenance order

Hi everyone,
I am looking for a report that would show open purchase order but only linked to open orders (I am here talking about the source production or maintenance order in the Account Assignement tab).
I have already checked transactions ME2L and ME2N but these do not seem helpfull.
Thanks in advance for your help.
Kind Regards,
Olivier

Use ME2K and enter the A/C category faor Production order and Maintenance order
make sure that Selection parameter should be selected as open GR and if you want to make your own filter than
go to SPRO-MM-Purchaisng-reporting-selection parameter-define sel parameter
here you can create your own and use that for report.

Similar Messages

Report with open Purchase orders and open Goods Receipt (without invoices)

Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.

Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik

Purchase orders and their open order quantity with their due dates.

hi friends
i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
please help mein finding the steps involved in building the query.
Thanks
Alahari

Use the table EKPO and EKKO
adhoc querry is a tool in which we can create report
to get report we have to use three t. codes
1.sq03-->is for to create user group
2.sq02--.is for infoset Querry
3.Sq01-->for exact querry
try with these codes or revert with ur response
follow the link for query creation
First check this link,
SAP Query Creation
SAP Query -A Reporting Tool for Functional Consultants(Part 2)
SAP Query 1
SAP Query -A Reporting Tool for Functional Consultants (Part 1)
Always after going to SQ02 or SQ01 T Code ,first click on Environment in the menu ->Query Areas-->
Standard Area Client specific and then start creating the Infoset or else the query.
Still if you are not satisfied means,please revert back.

Open Purchase Orders Report with Confirmation Dates

Hi Friends,
I have searched a lot for the following need and I have found nothing. I was wondering if there ia any report that I can show the scheduled delivery dates from a Purchase order. I have seen in ME2L that by placing EINT in scope of list I can see the schedule lines. However, if there is a new delivery date due to supplier confirmation that have been placed in PO with the indicator AB this is not appeared. At the same time if there is a partial quantity that has already been delivered then it does not appear as well. So, I need a report with all the scheduled delivery line plus the open quantity.
Many Thanks in advance,
Ioannis

It is very strange. Because what I see is that in this report the confirmation date is not appeared although the schedule line is appeared. Then If I go to change the confirmation date in PO for second time then it is appeared. I have no idea why this is happening

Open Production Order with Mark for deletion

Hi
Friends again stuck in open production order
i want to calculate production order quantity for open production order,
only those production order which dont have mark for deletion.
I find a field in afpo XLOEK ..but it wont get reflects when done changes in CO02
Then i used the table JEST and i want to delete those aufnr which has deletion flag i wrote the folowing code pls do correct me where iam wrong .
IN this code deletes aufnr which are marked as deletion ?
SELECT afko~aufnr
       afko~gamng
       afko~plnbez
       afpo~dwerk
       afpo~psmng
       afpo~matnr
       INTO CORRESPONDING FIELDS OF TABLE i_afko
       FROM afko INNER JOIN
       afpo ON afpoaufnr = afkoaufnr
       WHERE afpo~dwerk = s_werks
      AND   afpo~matnr IN s_matnr
      AND afpo~elikz = space.
LOOP AT i_afko.
CONCATENATE 'OR' i_afko-aufnr INTO i_afko-aufnr.
MODIFY i_afko.
ENDLOOP.
IF NOT i_afko[] IS INITIAL.
SELECT jest~objnr
         jest~stat
         jest~inact
          INTO CORRESPONDING FIELDS OF TABLE i_jest
          FROM jest
         FOR ALL ENTRIES IN i_afko
         WHERE objnr = i_afko-aufnr.
ENDIF.
LOOP AT i_jest INTO wa_ijest.
IF wa_ijest-stat = 'I0076' and ( wa_ijest-inact = SPACE ).
    DELETE i_afko WHERE aufnr = wa_ijest-objnr.
ENDIF.
ENDLOOP.
i_afko1[] = i_afko[].
SORT i_afko BY matnr dwerk.
DELETE ADJACENT DUPLICATES FROM i_afko COMPARING matnr dwerk.
loop ....
calculate :quantity
endloop.
Regards and answers will be rewarded points

thnks
solved the problem
regards

Purchase orders : Open and Completed,Open Only,and Completed Only

Hi Friends,
I have got a new requirement in Existing report I have to add few fields Like :
Slectio screen will be :
Purchase orders :
Open and Completed only
Open Only
Completed Only
When I select open and Completed only, it display only those purchase orders.
if i select Open only, it should display only open purchase orders, Like wise for Completed .
Could you please from which table i can find out the purchase is open and completed, or open only, completed only?
Could provide me the fileds for
Open and Completed only ?
Open Only ?
Completed Only?
Regards,
Xavier.P

Hi Xavier ,
Purchase orders :
Open and Completed only -- All PO in EKKO Table
Open Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is not set
Completed Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is set
Regards
Ramesh Ch

Allow negative stocks only if i have open purchase order

Good Morning Gurus
How to to the customization for the scenario like
open purchase must for allowing negative stocks in my plant.
with out open po negative stocks should not allow.
can we config for this ????????????
Thanks & Regards,
Naresh

Hi,
Why business go for negative posting, when purchase orders are open and if purchase orders are open, business can go for goods receipt as and when goods are delivered!
For special purpose, business go for negative stock posting with settings in OBY6 t.code for selection of check box 'negative stock permitted' in processing parameters for your company code and with setting in OMJ1 t.code for selection of check box 'negative stock' for your valuation area(plant).
Regards,
Biju K

BAPI for PURCHASE ORDER with OPEN QUANTITY field

Hi All,
I wanted to use the BAPI_PO_GETDETAIL to get the Purchase Order details upon triggering from Warehouse management system,
But the details required contains a field called OPEN QUANTITY...which is not used in this BAPI.
I request to let me know if any BAPI exits for PO details having the structure for this field:Open Quantity.
Am using SAP version 4.0B.
If not exists please advise how to customize the existing BAPI to meet the requirement.
thanks
mahi

Hi,
Open quantity is a calculated field. I guess the BAPI gives the details of the delivery, so take the ordered qty and substract the delivered qty from that.
Delivery data is EKET table.
Regards,
Ravi

Purchase orders and their open order quantity with their due delivery date

hi friends
i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
please help mein finding the steps involved in building the query.
Thanks
Alahari

Deliver date is available in table EKET field EINDT.
Use table : EKKO ,EKPO, EKET.

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

Purchase Order Items open vs ME2M discrepancy

First posting so if this is not the right section please move this topic. Was the closest I could come to correct forum placement.
Hello all, I am in the process of setting up BPM to monitor u201CN* of Purchase Order Items openu201D from various plant locations and I am noticing the number BPM gives is different than what the system you give if I used ME2M.
For example: I am setting up BPM to monitor Number of Purchase Order Items Open for plant location 2102. The set up is scarce and I only have a few fields filled out in the set-up:
-Document Type u2013 Single Value u2013 NB, UB, FO, ZPC, ZGR
-Plant (Item) u2013 2102
-Doc. Category u2013 F (Purchase Order)
-All of fields are left blank
When this runs I will get an example of 1487 (it changes on an hourly basis so I canu2019t give a static value).
When I try to verify this number using ME2M I get a value of 1237. A difference of 250.
The configuration I am using for ME2M is as follows:
-Plant u2013 2102
-Scope of List u2013 ALLES
-Selection Parameters u2013 WE101
-Document Type - NB, UB, FO, ZPC, ZGR
-All other fields at left blank
Any reason for this discrepancy? The closest I can guess is SAP is pulling in some additional information OR my configuration is incorrect. Anybody run into this issue that has some tips?
Thank you
-nic

I know that ME2M has nothing to due to with BPM.
I am confused as to why when I set up BPM, in Solution Manager, to monitor Purchase Orders that are open I am getting a different number than when I use the transaction ME2M in SAP ECC.
For example:
When the process runs in Solution Manager I get back 1425 open POs
When I go into SAP ECC and use the transaction ME2M it will only pull up 1175 open POs
Somewhere along the lines I am missing or adding 250 POs. The current setup (listed above; not sure if BPM is configured the same for everyone) is listed above.
I have tried various set-up options in both BPM Solution Manager and SAP ECC (ME2M) but can't seem to find where these additional numbers are coming from.
Thank you
-nic

Open Purchase order - urgent please

Hi Friends,
How to find an open purchase order, in which table i
need to check that.
Please let me know.
Thanks in advance.
Regards,
Roberts.K

Hi Roberts,
You have to consider the movement type along with the debit/credit indicator. A 101 movement type is for a Goods receipt for a PO and 102 is a reversal movement of the same. So to get all the GR quantity against a particular PO item, I would sum up all the 101(SHKZG = H) and subtract all the 102(SHKZG = S). The result is my total GR quantity. Line item quantity minus this GR quantity is my open quantity. The only exception to this is when the 'delivery complete' indicator is set, which means even though my GR quantity does not match my item ordered quantity, there are no more deliveries expected against this line item.
You can get these kind of reports from standard SAP reports. There is some configuration required, but you should be able to get open POs easily.
Hope this helps,
Srinivas

Open Purchase order migration between systems

Hi Folks,
I have to migrate open purchase orders from 2 legacy systems into 1 new upgraded system. I do not want to change the PO number and therefore i have decided to set an external number range for all the Open POs.
Now my problem is in legacy system, there are open POs with different document types, in legacy system. Is it ok if I convert all open POs as a new custom document type in new system. let me know what problems could i face if i do this.
if not any other solution is most welcome
thanks n advance

Kartikey,
???? You are asking the wrong people. We couldn't possibly know for sure. It sounds to me like you are already designing the conversion process when you are not yet sure about the design of the solution.
During the sessions when you are interviewing the client, you must ask multiple questions about his business. For one, you need to discover the existing business requirements that caused the client to use multiple document types in legacy in the first place. This information only can come from your client.
Once you discover his reasons (or lack of reasons), you then have to determine in your 'To-be' solution if you still will need to satisfy that same business requirement. If you do, then you have to determine if the solution that you design will require multiple document types in SAP, or if you will instead utilize a different method to satisfy the requirement.
Good Luck & Best Regards,
DB49

Open items for purchase order its very urgent

hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddy

check the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
                          line-size 255
                          message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT                                    *
Description : This report displays all Open PO Items and output     *
               would be PO Number,Material number and so on          *
Author       : Seshu                                                 *
Date         : 01/24/2007                                            *
MODIFICATION HISTORY                                                 *
DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
--|||--
01/24/07| Seshu    | DEVK921979 | Initial                            *
D A T A D E C L A R A T I O N   P A R T                         ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
         ekpo, " Purchase order Item
         marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
       ebeln like ekko-ebeln,
       matnr like ekpo-matnr,
       end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
      g_exit_caused_by_caller,
      gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat    type slis_t_fieldcat_alv,
      gs_print       type slis_print_alv,
      gt_events      type slis_t_event,
      gt_list_top_of_page type slis_t_listheader,
      g_status_set   type slis_formname value 'PF_STATUS_SET',
      g_user_command type slis_formname value 'USER_COMMAND',
      g_top_of_page type slis_formname value 'TOP_OF_PAGE',
      g_top_of_list type slis_formname value 'TOP_OF_LIST',
      g_end_of_list type slis_formname value 'END_OF_LIST',
      g_variant LIKE disvariant,
      g_save(1) TYPE c,
      g_tabname_header TYPE slis_tabname,
      g_tabname_item   TYPE slis_tabname,
      g_exit(1) TYPE c,
      gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*&      Form get_data_tables
      Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
                       from ekko as a inner join
                            ekpo as b on aebeln = bebeln
                            inner join marc as c on cmatnr = bmatnr
                            inner join mara as d on dmatnr = bmatnr
                            inner join eket as e on eebeln = aebeln
                                           and   eebelp = bebelp
                            where c~beskz = 'E'
                            and   c~werks = '1000'
                            and   d~mtart = 'FERT'
                            and   b~loekz = space
                            and   b~elikz = space
                            and   e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM.                    " get_data_tables
*&      Form display_data
      text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_INTERFACE_CHECK                 = ' '
   I_BYPASSING_BUFFER                =
   I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = v_repid
   I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = g_user_command
   I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      =
   I_GRID_SETTINGS                   =
   IS_LAYOUT                         = gr_layout_bck
      IT_FIELDCAT                       = gt_fieldcat[]
   IT_EXCLUDING                      =
   IT_SPECIAL_GROUPS                 =
   IT_SORT                           =
   IT_FILTER                         =
   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
    I_SAVE                            = g_save
    IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
   IS_PRINT                          =
   IS_REPREP_ID                      =
   I_SCREEN_START_COLUMN             = 0
   I_SCREEN_START_LINE               = 0
   I_SCREEN_END_COLUMN               = 0
   I_SCREEN_END_LINE                 = 0
   IT_ALV_GRAPHICS                   =
   IT_ADD_FIELDCAT                   =
   IT_HYPERLINK                      =
   I_HTML_HEIGHT_TOP                 =
   I_HTML_HEIGHT_END                 =
   IT_EXCEPT_QINFO                   =
IMPORTING
   E_EXIT_CAUSED_BY_CALLER           =
   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = i_output
   EXCEPTIONS
     PROGRAM_ERROR                     = 1
     OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_data
*&      Form fieldcat_init
      text
     -->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM.                    " fieldcat_init

Open production orders and its costs migration

Hi All,
We are migrating open production orders from legacy to SAP.
We have some standard cost production orders are open in legacy and like to migrate a open production orders to SAP?
May I know how can I do from controlling point of view?
I have one typical scenario.
I have one production order in legacy with 10 standard cost materials produce and out of 10, 5 materials are completed in legacy and we wants to migrate remaining 5 materials to SAP.
What are the steps I needs to follow to migrate open production orders.
Any help is appreciated.
Thanks,
Anusha

Hi Anusha,
Below is the process: (presuming that you're uploading balances as of 01.04.2009)
Upload all material masters,
Upload material initial balances,
Create new Production Orders as of cut off date, say 01.04.2009
Issues goods to Production Orders created above.
All the goods/material issued to Production are debited to raw material consumption account.
The value of WIP can only be ascertained during month-end closing process.
If it is pressing requirement then upload the balances as of 31.03.2009 and then do a month-end/year-end closing.
Thanks,
Srikanth

Open purchase order only with open production or maintenance order

Similar Messages

Maybe you are looking for