Purchase Order Items open vs ME2M discrepancy

First posting so if this is not the right section please move this topic. Was the closest I could come to correct forum placement.
Hello all, I am in the process of setting up BPM to monitor u201CN* of Purchase Order Items openu201D from various plant locations and I am noticing the number BPM gives is different than what the system you give if I used ME2M.
For example: I am setting up BPM to monitor Number of Purchase Order Items Open for plant location 2102. The set up is scarce and I only have a few fields filled out in the set-up:
-Document Type u2013 Single Value u2013 NB, UB, FO, ZPC, ZGR
-Plant (Item) u2013 2102
-Doc. Category u2013 F (Purchase Order)
-All of fields are left blank
When this runs I will get an example of 1487 (it changes on an hourly basis so I canu2019t give a static value).
When I try to verify this number using ME2M I get a value of 1237. A difference of 250.
The configuration I am using for ME2M is as follows:
-Plant u2013 2102
-Scope of List u2013 ALLES
-Selection Parameters u2013 WE101
-Document Type - NB, UB, FO, ZPC, ZGR
-All other fields at left blank
Any reason for this discrepancy? The closest I can guess is SAP is pulling in some additional information OR my configuration is incorrect. Anybody run into this issue that has some tips?
Thank you
-nic

I know that ME2M has nothing to due to with BPM.
I am confused as to why when I set up BPM, in Solution Manager, to monitor Purchase Orders that are open I am getting a different number than when I use the transaction ME2M in SAP ECC.
For example:
When the process runs in Solution Manager I get back 1425 open POs
When I go into SAP ECC and use the transaction ME2M it will only pull up 1175 open POs
Somewhere along the lines I am missing or adding 250 POs. The current setup (listed above; not sure if BPM is configured the same for everyone) is listed above.
I have tried various set-up options in both BPM Solution Manager and SAP ECC (ME2M) but can't seem to find where these additional numbers are coming from.
Thank you
-nic

Similar Messages

Standard program for unbilled sales orders and purchase order items

Can anyone advice, is there any standard program which gives the unbilled sales order and purchase order items.

Hi,
Use the T.Code VA05/VA05n for list of all the sales order s which are open.
Take T.Code:VA05N
Select the option "Open Sales Orders".
Execute.
It will give you all the orders which are open.
The standard program for this is:"SD_SALES_ORDERS_VIEW".
The same you can also get by using the T.Code VF04.
In this if your scenario is "Order related",then select the option "Order related".
Else if it is "Delivery related",then select "Delivery-related".
Execute.
The standatd program for this is:"SDBILLDL".
T.Code:VF05/VF05n is for list of billing documents.
Regards,
Krishna.
Note:Pls search the forum.

Report with open Purchase orders and open Goods Receipt (without invoices)

Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.

Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik

In MR11 - u201CNo (suitable) purchase order/item found     u201C.

Hi Friends,
We are having issue with MR11 in 4.6 B. While doing MR11 for a PO where Delivery costs have not been balanced, we are getting message u201CNo (suitable) purchase order/item found     u201C.
In the research, we found that in 4.6 B, MR11 is using program SAPMM08K, where as in ECC 6.00, it is using program SAPRCKM_MR11.
Initial fetch from PO history table :
4.6 B -> In 4.6 B we are using EKBI view (Join via EKKO / EKPO / EKBE for MR11) to fetch the PO history table. (It is not considering EKBZ table for delivery cost records)
Program is checking the Quantity of EKBI, if there is no difference in quantity then it is coming out of loop and showing message
No (suitable) purchase order/item found
    Message no. M8 401
3CAUSE&
    No purchase order exists which corresponds to your entry for a quantity
    difference posting.
ECC 6 -> In ECC 6.00 we are using view V_CKMLGRIR (DB View: Selection for MR11 Clearing GR/IR Clearing Account Table u2013 EKKO, EKPO and EKBE)
Here also program is checking the Quantity in the View, if there is no difference in quantity then it is going for another fetch (which is missing in 4.6 B).
In the another fetch, it is checking View V_CKMLGRIR_FR (DB View: Selection for MR11 Clearing Freight Clearing Accnt Table u2013 EKKO, EKPO and EKBZ)
I've searched sap notes but couldn't find much help. I've tried different search criteria but no luck. Could anyone able to help me?
Thanks,
Ramesh S

HI
MR11 will show only the blocked invoices due to quantity/price difference.
First of all please check your invoice (MIRO of your required PO) that it is blocked for invoice verification or not .(Please note block for payment is not relevant for MR11).
Further please check if you have mainatined any tolerance in GRN (MIGO) for under or over delivery , so it is not escaping the PO due to under/over tolerance limit.
Cheers
Mukta

Free Item in Purchase Order Item

Hello All,
I would like to ask where in table level can I identify Purchase Orders which have "Free Item". Because on the screen field i saw from the technical definition that the "Free Item" is of field MEPO1211-UMSON, but when I go to EKPO I cannot find the corresponding field.
I have this idea but I don't know if it is right or not, in case I uncheck the "Invoice Receipt" in the Purchase Order Item details, the "Free Item" check box appears. So I am thinking is all Purchase Order Items which have "Invoice Receipt" (EKPO-REPOS) uncheck considered as a "Free Item".
Thanks.

Hi,
When we are talking about Free Items, in SAP terms, it means that we would not have any conditions/Gross/Net Price.
Also, Invoice Receipt will be unchecked because for free items, there would not be any invoice right?
So we can conclude that, once Invoice Receipt is unchecked + Free items is checked, this particular line item will be received as free goods.
Note that if the material is valuated, it will affect your MAP (moving average price).

Create additional field in sales order item and copy to purchase order item

Dear SAP Gurus,
I am hoping that someone could help me by providing me with how to implement the following 2 requirements in the SD order and in the purchase order.
1. I am wanting to add a custom field to the SD sales order item copying a value from the vendor customer master.
2. I then want to add a custom field to the purchase order item and copy the value from my custom field in 1. to this new custom field..
Can you please advise how I would go about implementing the above requirements? I am assuming that there are exits to allow me to implement these 2 requirements.
Many thanks
Henry

Hi,
For the first requirement you can use the USEREXIT_MOVE_FIELD_TO_VBAP in report MV45AFZZ.
For the second, as I think that you will create a RFQ you can try to use the enhancement MEREQ001.
Regards,
Eduardo

Profit Segment not activated during creation of purchase order item

Hello,
While I create a Purchase Order Item, in the account assignment tab, I may fill in at least a cost center or a cost center and an internal order.
If I fill in only a cost center and key the enter buton, the profit segment is activated.
If I fill in the cost center and the Internal Order at the same time and afterwards I key the enter button, the profit segment is not activated. I have to click on the Profit segment button and validate the profit segment manually.
Could you tell me what the problem is?
Thank you in advance
Regards

Hi
That makes sense to me
In any entry you can enter One REAL Object and more than one Stat Object...
SInce you entered Cost Center in Option 1 - You were proposed with PSG and IO as the option
Since you entered Cost center *** REAL IO in Option 2 - The system got what it wanted i.e. One REAL OBJECT.. hence, no more objects are proposed to you... However, you can manually enter PSG or WBS if allowed in your Field Status Group in FI
br, Ajay M

Qty in Purchase Order Item

Hi ...sorry friends I am very new to SAP and that's why sending my foolish queries to u ... hope u will not mind.
I am using ECC6.0 and here at my end I encountered a strange issue (may be this is std SAP functionality but I couldn't understand the logic behind it.)
Issue is like...
Even in partially or fully delivered orders , I can change (increase) Ordered qty in Purchase Order items and even for the PO items for which "Delivery Completed" is set , I can change qty.
Also I wanted to know is there any setting by which i can lock this functionality (like users will not allow to change qty if material is recd (partially / fully )against this Po item.
Thx to all for yr valuable support and guidance.
Regards
SANDEEP

Hi!
In order to prevent the users from changing the PO quantity when they are fully delivered, you may maintain a system message for this in:
SPRO - Materials Management - Purchasing - Environment Data - Define Attributes of System Message - System Message
Set 00 06 744 to E (error) =)

Issue with purchase order item

Hi Guys,
When entering or changing an order in SAP via VA01/VA02, the system will not allow the entry of leading zeros in the Purchase Order Item (VBAP_POSEX) field which is defined as character 6. Leading zeros can be entered in the Customer Material (VBAP_KDMAT) which is also defined as character. Some customer PO Item numbers begin with leading zeros and they want to see them on output. Does SAP have an OSS note for this? any helpful suggestion would be well appreciated.
Thanks!
Edited by: MK18774 on Oct 5, 2009 9:57 PM

there is a include FV45PF0V_VBAP-POSEX_PRUEFEN
that checks PO number and item number .... with your own EKPO (purchase order item) table.
and this include has as well the routines to convert the number: CONVERSION_EXIT_ALPHA_INPUT

Import data to Purchase Order Item Level Text from DMS system

Hi,
I have the material PO Text maintained against the Material in the DMS system.
In R/3, when I am creating the Purchase Order, I want the system to retreive the PO Text maintained in DMS against the material in the Purchase Order and paste it in the Purchase Order Item details - Material PO Texts.
Could anyone suggest me which User Exit or BAPI and the Function Module to fetch this data from DMS.
Thanks in advance.
Regards,
Jeetendra

Dear Gurus,
We are able to populate the "Import Data" in the backend PO in our backend system 4.6C, thorugh user exit
EXIT_SAPMM06E_004 & EXIT_SAPLV50E_004.
Now when we create PO from SRM , the import related foreign trade data gets filled up from the master data.
Problem: In Header and Line item condition: We are not getting the condition type GRWR automatically, if the PO is comming from SRM. Because of this the statistical value is 0.
( If we create manual PO, the condition GRWR appears in PO - and the Statistical value gets filled in automatically )
How can we put the condition type GRWR into the PO using user exit ?
Thanks and regards,
Anil Rajpal
Edited by: ANIL on Aug 12, 2010 6:18 PM

User exit/BADI for updating Purchase Order Item

I am would like to update the purchase order item - specifically field EKPO-REPOS in a user exit or BADI. I haven't been able to find one that allows you to update the purchase order item.
Any input would be appreciated.
Derick

You can use BADI ME_PROCESS_PO_CUST for you requirement
Method PROCESS_ITEM
* Retrieve item data.
    CALL METHOD im_item->get_data
      RECEIVING
        re_data = v_data_item.
Do you validations and changes here
*update changes
CALL METHOD im_item->set_data( v_data_item ).

Expand Table Control with Fields for Purchase Order Item Overview

Hi Gurus.
Hereu2019s something easy for you, I hope/ think. We just want to additionally show the field u201CMFRPNu201D in the purchase order item overview. See structure MEPO1211 for the table control.
How can we do this? Is it possible without a modification? Is there anything to pay attention to?
Lot's of questions, because we donu2019t find any complete solutions yet. It seems there are no official SAP suggestions for this issue.
Thanks in advance!
Regards
Patric

Is there no one out there who can answer my question?

Purchase Order item value breakup condition type wise

Dear Sir,
We are developing a custom report and in this report we need to reflect for Purchase Order item wise the break-up of values at the condition type level .
In Me23n , at at Item Level , when we click on tab <Condition> then all values break-up at condition type level gets displayed .
But to use in custom program , we need to know the table where this information is available .
Kindly guide us pl .
Regards
B Mittal

Hi,
This suggestion is based on my understanding of your issue. May not be straight forward SAP solution.
I would suggest you to make following assessment for your custom program: (going through the condition tab will lead you to structures)
1. Try to figure out how the pricing condition are maintained. Normally you have your Base price PBXX or gross price per EA defined that can be found in the PIR of the material + Vendor combination or in the pricing condition you would have defined.
2. In same way figure out all the other absolute condition types. I mean any thing that is not % percentage based on PBXX value. (assess ;your pricing Schema to understand this.
3. Once you know how is your pricing schema breakup then try to pick the net price of PO and then do a backward calcuation based on PIR condition value. .
Hope this helps.
thx
MJ

Purchase order item details in the drop box is not appearing

Hi all ,
I have created a 'Z' transaction ME22N .Purchase order change .
In that transaction purchase order item details in the drop box is not appearing.
Please suggest .

Hi,
System will not display the Purchase order item details in the first screen. First enter the data on the Item overview like Material or short text then only it will display the Item details.
I think you are checking with out entering the data on Item overview .
Check by entering the material/short text.
rgds
Chidanand

Req:Download of purchase order item details using ALV oops

Hi all,
How to download the purchase order item details using ALV oops from the output of header details

Hi all,
How to download the purchase order item details using ALV oops from the output of header details

Purchase Order Items open vs ME2M discrepancy

Similar Messages

Maybe you are looking for