Allow negative stocks only if i have open purchase order

Good Morning Gurus
How to to the customization for the scenario like
open purchase must for allowing negative stocks in my plant.
with out open po negative stocks should not allow.
can we config for this ????????????
Thanks & Regards,
Naresh

Hi,
Why business go for negative posting, when purchase orders are open and if purchase orders are open, business can go for goods receipt as and when goods are delivered!
For special purpose, business go for negative stock posting with settings in OBY6 t.code for selection of check box 'negative stock permitted' in processing parameters for your company code and with setting in OMJ1 t.code for selection of check box 'negative stock' for your valuation area(plant).
Regards,
Biju K

Similar Messages

Implications that we could have if we allow Negative Stock in SAP

Hi Gurus.
Can I have in details the Implications that we could have if we allow Negative Stock in SAP please ?
Thanks
Nainar

Hi Nainar,
Implications in the sense, if you try to issue more stock than the existing. System pop up an error message that insufficient stock.
If you activate the Negitive stock then the system allows you to issue the stock.
Ex : Suppose ur company has power cut and u use generator at the time of power cuts.Now that u use diesel for generator, if suppose u have stock physically avaliable in ur plant and u didnt enter the GR(not avaliable in system). At this point u have to issue the diesel to run generator, hence system will show you negitive stock(-ve quantity) the amount u have issued. Later when u enter GR, it will tally issed quantity.
To activate Negitive stock at plant level, follow the path
SPRO>MM>Inventory Management and Physical Inventory>GI/Transfer Postings->Allow negative stock.
BR,
Krishna

Allow Negative Stock in Quality Inspection

Hi All,
I have a general question regarding Negative Stock.
Is it possible by any means to allow -ve stock in Quality Inspection. If yes then what are the customizing settings that are needed.
Any valuable inputs will be really appreciated!!
Thanks In Advance!!
S

hi
firstly how can we have negative stock in Quallity
stock updates in quality from PURCHASE or PROduction so we cant have -ve stock in quality
negative stock will be there only up on consumtion
now u can have negative stock in GOODS ISSUE ,as on emergency if u dont have mateial and u have to issue some material to production then u have to have -stock open
now for this go to material master plant data 2 view and here u can ticl for allow negative stock
regards
kunal

Allow negative stock on storage location

Dear all,
When we allow negative stock on a storage location. At posting time we have an error "deficit stock of batch assignment". Anybody got a clue of what has to be done to correct this ???
Cheers,
Olivier

Dear Oliver,
Please do the following checks.
Prerequisites
To work with negative stocks, you have to:
· explicitly allow this in the Customizing system for each valuation area and storage location
· set the indicator Neg. stocks in plant in the material master record of the individual materials (storage data)
Negative stocks are allowed for special stocks if you have activated negative stocks in the valuation area and for the special stock concerned in the plant. You do not need to activate negative stocks in each material master record.
Procedure
You can define whether you want to allow negative stock by making the relevant settings for each storage type in Customizing.
To do this, choose Logistics Execution -- Warehouse Management--- Interfaces -- Inventory Management -
Allow Negative Stocks in Interim Storage Types --- Allow negative stock for each storage type in the Implementation Guide (IMG).
When the allow negative stock indicator is set, the system lets you post negative quants to the corresponding storage type.
Additionally, you can define whether you want the system to issue an error message (E) or a warning message (W) or no message (blank) when posting negative stock. You can make the relevant setting in the activity Control of System Messages in Warehouse Management. You can determine the notification type using the parameter MSV in the user master record.
To do this, choose System --- User profile --- Own data.
Then select the tab page Parameters.
Enter MSV in the Parameters field and enter the value with which you want to group certain users in the value field (for example 01).
Choose Logistics Execution ® Warehouse Management ® Interfaces ® Inventory Management ® Allow Negative Stocks in Interim Storage Types ® Control of System Messages in Warehouse Management in the Implementation Guide (IMG).
Create a new entry with the version number (Value) you have chosen and enter the desired system reaction in the Message Category field (E, W, or blank).
Regards
Mangal

Why 'Allow Negative Stock' doesnt go with put away strategy L

Just a quick question
Why Putaway Strategy L doesnt go with 'Allow Negative Stock'

Hi,
If you enter the putaway strategy L- system will finds the next empty bin where there is no quantiy or no quant.
If you assign "allow negative stock indicator", if stock is not there (ex for goods issue / delivery) system will generate a negative stock with a negative quant.
But while placing the new stock system will them neglect the bins with negative quantity (considering as quants), it will place it in the next empty bin.
It contradicts the logicof negative stock check, so standard will not allow negative stock indicator for putway strategy L.
thanks,
JK

Open purchase order only with open production or maintenance order

Hi everyone,
I am looking for a report that would show open purchase order but only linked to open orders (I am here talking about the source production or maintenance order in the Account Assignement tab).
I have already checked transactions ME2L and ME2N but these do not seem helpfull.
Thanks in advance for your help.
Kind Regards,
Olivier

Use ME2K and enter the A/C category faor Production order and Maintenance order
make sure that Selection parameter should be selected as open GR and if you want to make your own filter than
go to SPRO-MM-Purchaisng-reporting-selection parameter-define sel parameter
here you can create your own and use that for report.

DRQ: Check open purchase orders in Stock Data.

It´s a pray if you can click on a arrow in the Item Master Data under Stock Data in the Colum Ordered to see all open purchase orders for this Item. and the same for Commited to see the open seals orders.

Hi
If your query below is still unresolved, then I request you to
- pls be more clear on what your question is? this will help in providing a suitable solution.
Thanks,
Srikanth

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Close open Purchase order

Dear Experts,
My client has change the release procedure, but they have not closed the open Purchase orders, now we are trying to close the open PO system is not allowing us to close the Open Po , complete delivery indicator is in grey mode , Can any body help me How i wll i close the Open Purchase orders
Thanks
Hirwani

Hi Hirwani,
I have seen this a few times before.
I found other customer has similar problem as the release strategy has changed
after creation of the SES please review the explanation from developer
:(whose release code is 03 )
When you try to revoke the acceptance of the service entry sheets
in ML81N or ML81, the 'Enter release code' pop up window appears, but
entering the code that is determined via the menu path Goto -> Entry
Sheet -> Release Strategy (which is the 03), the SES remains the same.
Nothing changes. The status does not vary and no error or warning
message is issued.
Checking the customizing for the release strategy, the release code
03 should have never been assigned to the SES 800024272 as the values
for the relevant characteristics were not included under that code.
I do not know how it was managed to accept the SES.
Now, when you try to revoke it, it seems that no release
strategy can be determined, not even including the values RCARESANO
and 012 between the valid values for the characteristics of the release
code 03 (RCARESANO as valid value for SUPERVISOR_SERVICIOS
(CESSR-ERNAM)and 012 as valid value for GRUPO_COMPRAS (CESSR-EKGRP)).
The only Possibility is to change now the SES so that the release
strategy can be re-determined by the system.This is the Only possible
way that the system can redetermine the Release Strategy , but it will
not be possible to do so as the SES is already accepted with the Old
strategy and it does not admit any further changes.
To be able to change it you would need to revoke the SES first,
but this Will also not be possible as the Release Strategy was changed
and the system still applies the old rules for determining the Release.
Solution to our Problem
The Only way to revoke the SES is to Restore back the Old Strategy that
was prior to 03 in the customizing.So now what will happen is that by
applying the Old Rules the System will be able to revoke the SES that#s
using the Old one. Once the necessary SES are revoked then go back to
customizing and apply the new strategy as it was did now, and
Change the SES and save , the new value of the Release Strategy will get
updated in the table ESSR and the field frgsx will now have 03.
Problems associated if the Release strategy is changed
Actually the release strategy is not supposed to be changed when there
are some documents in the System that uses it and even if you change the
Strategy the Old records will not get AUTOMATICALLY UPDATED by the
system.The Release Strategy routine has to run again to update the
values. This is Possible by changing the document SES ,
This change will happen only if the SES is not accepted and if its
accepted then you need to revoke and to revoke you need to restore the
old strategy , revoke and then change the SES , and have to go back to
customizing and Start using the New strategy from now on by doing so the
Routine will update the old record with the new strategy.
You may want to use CEKKO-BADAT(Requisition Date) or any other
structure in CEBAN or CEKKO and create a new release strategy
to differentiate the old release strategy.
Alternatively using the corresponding user exit to redermine the BAdI might help but my first suggestion would be the best.
Purchase requisition
                       M06E0002 - for item wise release
                       M06E0005 - for overall release
External purchasing document
                       M06E0004
Hope this is of help to you,
Kind Regards,
Matthew

Unable to cancel - open purchase order where all items are removed

Hi all,
When We try to cancel/close open purchase order where all items are removed from item master ?
It showing error message,
"No matching records found 'Items' (OITM) "
Purcahse order was created on may-2007.
As purchase order showing in open item list.
Any solution for this problem ?
Jeyakanthan

SAP does allow items to be removed from the item master with open documents, but only if the documents have not created journals.
It does create headaches though, and this situation is one of them.
If there are not many items, I suggest you recreate the items, close the PO and just cancel the items rather than remove them.
The other workaround is to change the items on the PO to something different that is in the item master, then close it.

Open Purchase Order quantity in SC PO

Hi,
Can anybody tell me open purchase order quantity in case of Subcontracting Purchase order.
what happen in case of subcontracting po with open quantity of po
Thanks and Regards
Anil Patil

Hi
Can you please more specific
1) Normally in subcontracting if ur PO is open then it means that still the assembly stock is with vendor
2) in some case if the vendor consumes more components/qty than the original BOM qty in the received
Finished Goods then you need to do subsequent adjustments
3) If u dont have any assembly components in hand for issuing the same to vendor then adjust the PO qty and close it
Regards
Amuthan M

Open Purchase order - urgent please

Hi Friends,
How to find an open purchase order, in which table i
need to check that.
Please let me know.
Thanks in advance.
Regards,
Roberts.K

Hi Roberts,
You have to consider the movement type along with the debit/credit indicator. A 101 movement type is for a Goods receipt for a PO and 102 is a reversal movement of the same. So to get all the GR quantity against a particular PO item, I would sum up all the 101(SHKZG = H) and subtract all the 102(SHKZG = S). The result is my total GR quantity. Line item quantity minus this GR quantity is my open quantity. The only exception to this is when the 'delivery complete' indicator is set, which means even though my GR quantity does not match my item ordered quantity, there are no more deliveries expected against this line item.
You can get these kind of reports from standard SAP reports. There is some configuration required, but you should be able to get open POs easily.
Hope this helps,
Srinivas

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

Open Purchase Order Separation from item Order Qty

Hi All,
Kindly suggest me how to separate open Purchase order from Item Order Qty.if i have 2 WH with different Order qty.in report it will be shown total order qty of both WH's.like
Item            WH              Order Qty
A                 01               100
A                 02                 50
                  or
A                 01                  0
i need like this A--150   OR A--50(order qty).
plz look into my query and suggest me how to do this.
select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
sum(t1.openqty)
as OrderQty,
t2.MaxLevel as 'Max Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II' from OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and t2.[U_pperson]='p1' or t2.[U_pperson]='p2' or t2.[U_pperson]='p3' group by t3.CardName,T4.[OnHand],t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel,t1.OpenQty
Thanks&Regards,
P.Pratap

Hi,
Try this:
select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
sum(t1.openqty)
as OrderQty,
t2.MaxLevel as 'Max Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II'
from
OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and t2.[U_pperson]='p1' or t2.[U_pperson]='p2' or t2.[U_pperson]='p3'
group by t3.CardName,t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel
Thanks & Regards,
Nagarajan

Open Purchase order migration between systems

Hi Folks,
I have to migrate open purchase orders from 2 legacy systems into 1 new upgraded system. I do not want to change the PO number and therefore i have decided to set an external number range for all the Open POs.
Now my problem is in legacy system, there are open POs with different document types, in legacy system. Is it ok if I convert all open POs as a new custom document type in new system. let me know what problems could i face if i do this.
if not any other solution is most welcome
thanks n advance

Kartikey,
???? You are asking the wrong people. We couldn't possibly know for sure. It sounds to me like you are already designing the conversion process when you are not yet sure about the design of the solution.
During the sessions when you are interviewing the client, you must ask multiple questions about his business. For one, you need to discover the existing business requirements that caused the client to use multiple document types in legacy in the first place. This information only can come from your client.
Once you discover his reasons (or lack of reasons), you then have to determine in your 'To-be' solution if you still will need to satisfy that same business requirement. If you do, then you have to determine if the solution that you design will require multiple document types in SAP, or if you will instead utilize a different method to satisfy the requirement.
Good Luck & Best Regards,
DB49

Allow negative stocks only if i have open purchase order

Similar Messages

Maybe you are looking for