OPEN SSL certificate generation issue--bpel email activity

Hi all,
I need to send a mail from bpel using email activity.
I made all settings changes.I downloaded OPENSSL software and I need to generate smtp ssl certificates?
But while generation of ssl certificates I am getting some issue
OpenSSL> openssl s_client -starttls smtp -crlf -connect smtp.gmail.com:465>
gmail.cert
openssl:Error: 'openssl' is an invalid command.
Standard commands
asn1parse ca ciphers crl crl2pkcs7
dgst dh dhparam dsa dsaparam
ec ecparam enc engine errstr
gendh gendsa genrsa nseq ocsp
passwd pkcs12 pkcs7 pkcs8 prime
rand req rsa rsautl s_client
s_server s_time sess_id smime speed
spkac verify version x509
Message Digest commands (see the `dgst' command for more details)
md2 md4 md5 rmd160 sha
sha1
Cipher commands (see the `enc' command for more details)
aes-128-cbc aes-128-ecb aes-192-cbc aes-192-ecb aes-256-cbc
aes-256-ecb base64 bf bf-cbc bf-cfb
bf-ecb bf-ofb cast cast-cbc cast5-cbc
cast5-cfb cast5-ecb cast5-ofb des des-cbc
des-cfb des-ecb des-ede des-ede-cbc des-ede-cfb
des-ede-ofb des-ede3 des-ede3-cbc des-ede3-cfb des-ede3-ofb
des-ofb des3 desx idea idea-cbc
idea-cfb idea-ecb idea-ofb rc2 rc2-40-cbc
rc2-64-cbc rc2-cbc rc2-cfb rc2-ecb rc2-ofb
rc4 rc4-40
Can any one suggest me ,What I entered is correct or not?how to generate smtp certificates?
Thanks in advance
Krishna

Fabian,
Are you familiar with Firefox OS? The reason I say this is because the email client cannot create a certificate excaption. This is actually by design. This is by design: https://wiki.mozilla.org/Gaia/Email/Features#Security
This support request at Mozilla was placed specifically for the Firefox OS product, for which only a single email client exists.
That being said the good folks on the Mozilla Bugzilla, were able to show me how to look up another alias for these servers which does in fact work and does in fact match the SSL certificates. Though Dreamhost support could not provide me with said information, and said information does not in fact exist in the DreamHost wiki.
I find repeated insistance from Dreamhost represenatives that I should just live with SSL certificate exceptions, when there are actual valid server names in existence to match the certificates in question, rediculous.
The fact that you are posting this non solution for a product it isn't even applicable for is beyond unhelpful. It actually serves to muddy the waters.

Similar Messages

Facing issue in Email Activity of the BPEL

Hi All,
I have created a Simple BPEL process, which will send email to a particular user(Email ID). The input of BPEL is taking the User's Email ID and pass the Email ID to "To" portion of Email Activity. Then the Email Notification service will send the message to user's mail ID.
But I am getting error :
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricInvocationException: Schema validation failed for message part Responses. Please ensure at the message sender level that the data sent is schema compliant. Can not find definition for element 'ArrayOfResponseType'</summary>
</part>
<part name="detail">
<detail>Can not find definition for element 'ArrayOfResponseType'</detail>
</part>
<part name="code">
<code>null</code>
</part>
</remoteFault>
</bpelFault>
It is taking the proper User's Mail id.
Any suggestion will be helpful to me.
Thanks
Sharmistha

Hi All,
I have created a Simple BPEL process, which will send email to a particular user(Email ID). The input of BPEL is taking the User's Email ID and pass the Email ID to "To" portion of Email Activity. Then the Email Notification service will send the message to user's mail ID.
But I am getting error :
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricInvocationException: Schema validation failed for message part Responses. Please ensure at the message sender level that the data sent is schema compliant. Can not find definition for element 'ArrayOfResponseType'</summary>
</part>
<part name="detail">
<detail>Can not find definition for element 'ArrayOfResponseType'</detail>
</part>
<part name="code">
<code>null</code>
</part>
</remoteFault>
</bpelFault>
It is taking the proper User's Mail id.
Any suggestion will be helpful to me.
Thanks
Sharmistha

Firefox does not recognize SSL Certificate issuer Entrust Certification Authority – L1K, but Entrust Certification Authority – L1C is ok?

We have a new Entrust SSL Certificate with issuer Entrust Certification Authority – L1K which Firefox does not recognize. Internet Explorer and Chrome are ok.
On a different system we have an Entrust SSL Certificate with issuer Entrust Certification Authority – L1C which is ok with Firefox.

Did you verify that all intermediate certificates are installed on the server?
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
*https://www.ssllabs.com/ssltest/

Problem with Email Activity in BPEL

I am relatively new to BPEL, and I'm trying to add an Email Activity. My problem is this:
I can get the email to send, but I have to shut down the SOA Suite to make that happen.
Any ideas on what could be causing this?
Any help in this matter would be greatly appreciated.
Thanks...

Yes. The messages do seem to be all accumulating until the shutdown until the suite is shut down.
I'm just beginning to play around with the Email activity, so I'm hard-coding all the parameters. We're currently using SOA Suite 10.1.3.1. I'm not using any attachments in the email, however, it seems that I can't turn the multi-part check box off. I un-check it, and apply, but when I go back into that screen, it's checked again.
Here's the code for the email activity:
<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<sequence name="Sequence_1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('Testing BPEL Email Activity')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('[email protected]')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('Test')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
partnerLink="NotificationService"
portType="ns1:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
Thanks for your continued help.

Text in the email body is going as attachment through email activity

hi ,
In my bpel email activity the body part is going as an attachment. Even a text like 'hi' also going as an attachment where i need to download the file and need to read the content.
Can any one help is in solving this issue.
Thank you
Gayaz

hi Jyotirmoy,
this is the format i am using
<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns3:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns3:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns3:NotificationServiceErrorMessage"/>
</variables>
<sequence name="Sequence_2">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:ReplyToAddress"/>
</copy>
<copy>
<from expression="concat(concat(concat('RLMS ',bpws:getVariableData('inputVariable','payload','/client:AarlmsDailyWeeklySubscriptionProcessRequest/client:input')),' Subscription Alert: Uploaded and modified files for folder'), bpws:getVariableData('folderPath'))"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Subject"/>
</copy>
<copy>
<from expression="bpws:getVariableData('emailIds')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:To"/>
</copy>
<copy>
<from>
<Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/mixed</MimeType>
<ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
<ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
<BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
</BodyPart>
</MultiPart>
</ContentBody>
</Content>
</from>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Content"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Content/ns3:ContentBody/ns3:MultiPart/ns3:BodyPart[1]/ns3:MimeType"/>
</copy>
<copy>
<from expression="string('NotificationAttachment1.html')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Content/ns3:ContentBody/ns3:MultiPart/ns3:BodyPart[1]/ns3:BodyPartName"/>
</copy>
<copy>
<from expression="string('hi')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns3:Content/ns3:ContentBody/ns3:MultiPart/ns3:BodyPart[1]/ns3:ContentBody"/>
</copy>
</assign>
<invoke name="InvokeNotificationService" partnerLink="NotificationService"
portType="ns3:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
Thank you
Gayaz

Issue with email bpel activity

Hi,
I am trying to use Email activity in my bpel flow.
I configured the email driver with smtp server/port/userid/pwd
and using "[email protected]" as my recipient address.
When executing the bpel , i am getting the below exception:
Error SDP-26105 unable to deliver to following address(es): [email protected], Reason: Invalid Addresses
Below is the bpel activity for email invocation:
<scope name="Email1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns10:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns10:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns10:NotificationServiceErrorMessage"/>
</variables>
<sequence name="Sequence1">
<assign name="EmailParamsAssign">
<copy>
*<from expression="string('[email protected]')"/>*
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:ReplyToAddress"/>
</copy>
<copy>
<from expression="'Newv order received for :'+bpws:getVariableData('inputVariable','payload','/ns2:Order/ns2:orderId')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:Subject"/>
</copy>
<copy>
*<from expression="string('[email protected]')"/>*
*<to variable="varNotificationReq" part="EmailPayload"*
query="/EmailPayload/ns10:To"/>
</copy>
<copy>
<from expression="'Your oarder for '+bpws:getVariableData('inputVariable','payload','/ns2:Order/ns2:prodName') +' is recevied'"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:Content/ns10:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns10:Content/ns10:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
portType="ns10:NotificationService"
partnerLink="NotificationService1"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"
operation="sendEmailNotification"/>
</sequence>
</scope>
Any help will be highly appreciated.

Try with the below Link, to check that you had configured correctly and restarted server.
http://technology.amis.nl/blog/6019/configure-soa-suite-11g-for-sending-email-notifications-with-google-mail
Thanks,
Vijay

Email Activity Not sending email when BPEL process fails

In 11g SOASuite I have a BPEL process which does the following,
1) Receive response from client
2) Email activity - Notify with an id received in the request as content
3) Insert data into a table using db adapter
Whenever db adapter has some key violations or issues, I notice that no emails are getting dispatched. When I look at EM console it displays that txn has been rolled back after 3rd step. I understand that but it makes me ask this question,
How can I make the process to send an email at step2 irrespective of an error that happens down stream at step-3? How to make email activity not part of this Txn scope?
It works as expected(emails are dispatched) when there are no issues at step-3.

Hi,
In order to not rollback your transactions, you need to hit a dehydration point, meaning, save your process into the db store and perform a commit until that point.
It sounds like a simple process, so you can drag a checkpoint activity after the email activity.
That is one option. Try, and see if it works for you.
Arik

When accessing Intranet sites that use SSL Certificates issued by our internal PKI, FF for Windows give an error of "improperly formatted DER-encoded message"

When accessing Intranet sites with that have SSL Certificates issued by our internal PKI, FF for Windows gives an error messsage - An error occurred during a connection to myshaw. security library: improperly formatted DER-encoded message. (Error code: sec_error_bad_der)
Chrome and IE work fine. This is a new PKI using the SHA-2 signature algorithm.

Hi Guigs2,
From the other post you link too, I can confirm that both the Root and Subordinate CA have been commissioned with the:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\IssuingCA\CSP\AlternateSignatureAlgorithm = 1
registry key set. As can be seen above, the Signature algorithm on an issued certificate is RSASSA-PSS. This is been Microsoft suggested deployment IF you do not wish to support either XP or Windows 2003 machine and lower. In fact, I believe the option has been around since Windows 2008, however, there were of course, a lot more XP machines back then.
The obvious answer is that we would like to maintain the updated algorithm, AND see support for it added for Firefox. I think you will see a LOT more posts like this as people deploy more 2012 PKI infrastructure supporting only Windows 7 and up. Heavens, we may well be forced to Chrome or even back to IE!!! Whilst I do not what to necessary open up other potential vulnerabilities, for the sake of testing, what do you mean by disabling mozilla:pkix?

A fix for the Mozilla Firefox SSL Certificate Validation Security Weakness vulnerability? This appears to be an issue with not revalidating certificates when loading HTTPS pages from cache.

We have to close vulnerabilities for PCI & Cybertrust certification. We have upgraded users running Firefox to version 7.0.1 but we are still receiving the message: Mozilla Firefox SSL Certificate Validation Security Weakness. Researching the issue, it appears to be related to certificates not being revalidated when loading HTTPS pages from cache. The bug report I found is:
Bug 660749 - Firefox doesn't (re)validate certificates when loading a HTTPS page from the cache

cookies.squite answer is Today at 5:15 PM .
New profile, same problem.
We've already established it is not a add-ons problem but obviously there will be less add-ons in this new profile to help exclude.
Since there is two PC profiles on the PC, I tried the second profile, same problem. Used the RESET FF function on the second PC profile...same thing...even followed the instruct for uninstall &re-install...same problem.
(3) different virus scanners, no hard core problems.
Suspect how I have something in Windows setup that no one else is using?

How to include the user as a recipient of the email generated when a smart card certificate is issued by an Enrollment Agent on behalf of a user.

How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf.
I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assign a PIN and use it without the user's knowledge.
There doesn't seem to be a way in the registry to define a variable to be used in a manner similar to the TitleArg & TitleFormat way of using %1.
Jamal Saket OSFI Canada

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down.

CF7 and JDK 1.4.2 - EV SSL Certificate Issue

Let me start off by telling the group that we do not use CF for any of our applications. We are a payments company that hosts a .NET API in IIS that 100's of thousands of customer use. We have one particular customer using CF7 and JDK 1.4.2 who is currently unable to process against our API. About a week ago we upgraded our SSL certificates to EV (Extended Validation) and since that time our once happy customer is now unhappy. I have spent hours working with him, going through FAQs and walk throughs, knowledge bases and forums and have had no luck. Here are the details:
EV Certificate issued by DigiCert (4096-bit).
Customer is on CF7 and JDK 1.4.2.
When he attempts to process against our API with the new certificate he gets 'Connection Failure: Status code unavailable' message from his CF application. He is using cfhttp to post his requests. We found a work around that indicated that the only issue with JDK 1.4.2 was importing the high-bit certificates. Our customer installed JDK 1.6, imported the certificate (and all intermediate certificates) successfully into the cacerts file, but when attempting to list using JDK 1.4.2 is returns an invalid certificate error and still will not work.
Please help as we are currently in a work around state for this customer (not long term) and we have exhausted the resources we have access to for solving this issue.
Thanks in advance to those gurus that reply. I have attached a sample post from our customers logs with non-essential data removed.
I can be reached by phone at 801-341-5620 if anyone feels like reaching out to talk.
- Dave

Dave,
I am having a similar issue with CF7 and PayPal's Reporting API which also uses EV SSL.
I can offer that in my testing, both CF 8 and CF 9 do seem to be able to work when using CFHTTP and EV SSL,
so the only solution I can offer at this time is to make the suggestion to your customer that they need to upgrade
to either CF 8 or CF 9 to get the issue quickly resolved.
I'm still working to see if I can find a solution for CF7 and I've been asking around in the CF community for help, so
if I do find a solution, I'll definitely post it there for you.
Cheers

NAC SSL certificate Issue

I recently applied a signed certificate to both the CAM and CAS. ever since then I have been having problems with the system. In the perfigo logs on the CAM I receive a lot of messages with "Certificate chaining error" in them. My question is what is the best way to roll back the signed certificates to the self signed ones? Any other suggestions would be greatly appreciated.
Thanks in advance.

Hi Giles,
Thanks for te update. The problem I am facing is:-I have 2 SSL certificates on my ACE and I have also configured 2 server farms (farm1 and farm2)each associated with ssl certificate, now the problem i am facing is when we access the farm2 serverfarm we are issued the certificate of farm1 wereas i need to be getting the certificate from the farm2.
Thanks in advance.
Regards
Sum

Email activity configuration in BPEL

Hi,
I am trying to develop a composite which will send the Email to user if any error occurs in BPEL flow by using EMAIL activity.
But I am not aware about setting required on web logic server for sending the mail.
It will be a great help, if anybody guide me.
Thanks
Renu

Please follow this blog. This should help you.
http://www.rubiconred.com/blog/email-notification-with-soa-suite-11g/

Is the email provided by BC encrypted or have a SSL Certificate?

Is the email provided by BC encrypted or have a SSL Certificate?
I have a client who is having difficulty completing their Outlook set-up.
Questions: Is the email system encrypted normally or does their need to be a SSL Certificate in place (or is that pretty much the same thing)?
Thx

Hey,
It is possible to configure an SSL encryption as per the following article: http://kb.worldsecuresystems.com/928/cpsid_92838.html
Cheers.

OPEN SSL certificate generation issue--bpel email activity

Similar Messages

Maybe you are looking for