Open the web application in the client browser

Please. I am newer to Oracle. I have MS 2000 Server installed, then Oracle 8i 8.17 standard edition release 3 installed and 9ias installed.
The computer is using 192.168.1.2 as IP address.
Follow the guide, I have created a database. I used Netscape 6.1 and go inside of http://mydomain.com/pls/portal30 to logon as single sign on to create some forms based on the tables created, where mydomain.com is something unqualified domain and never register at internic.
However, except the computer I am using can see this web-page in a browser, all other users in the same local area network will result as "Page not found". But, strangely, if I type http://192.168.1.2 only at the other workstation's browser, I can the first page which is showing "Apacle..."
Can anyone help me to solve how to make other workstations can see the page across the local area network. Some information is:-
1. DNS server has installed in this computer but no server has been added.
2. The primary and secondary DNS server is provided by local ISP
3. I only have a single IP address of 192.168.1.2 and one default gateway ip address of 100.100.1.50
Much thanks

How does the client know the address of the web server.
You said it's not in DNS, then you must put it in the hosts file on the client.
When you go to the ip address the apache page shows. OK then when you enter /pls the portal will redirect to the FQDN which the host cannot resolve. Hence the page will not appear.
Is this an intranet??? or do you need internet access to your portal??? ( if you do need internet access then is Win 2K secure)
If it is an intranet then you must look at your internal host name resolution. If it is an intranet then why use a FQDN??? our portal intranet uses a hostname only and WINS (NT4) to supply clients with the address. using the Hosts file is even quicker.
Once you have sortd out the hostname resolution problem then Netscape /ie on the client must be configured to bypass your proxy so that they can access the intranet portal server direct (otherwise they will look up the address on your ISP's DNS).
Hope this helps.

Similar Messages

  • System.IO.FileNotFoundException: The Web application at ..not found - when getting document versions in a doc lib

    i have created a    asmx file using vs 2012 4.5 framework, and published to my d:\  drive  and mapped to a  iis  web site
    but when i trued to consume this from a another web appln, it throws me the below error:
     System.IO.FileNotFoundException: The Web application at http://srvr:4000/sites/mysitecollec could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a
    new request URL mapping to the intended application.
       at Microsoft.SharePoint.SPSite.LookupSiteInfo(SPFarm farm, Boolean contextSite, Boolean swapSchemeForPathBasedSites, Uri& requestUri, Boolean& lookupRequiredContext, Guid& applicationId, Guid& contentDatabaseId, Guid& siteId,
    Guid& siteSubscriptionId, SPUrlZone& zone, String& serverRelativeUrl, Boolean& hostHeaderIsSiteName, Boolean& appWebRequest, String& appHostHeaderRedirectDomain, String& appSiteDomainPrefix, String& subscriptionName, String&
    appSiteDomainId, Uri& primaryUri)
       at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, Boolean swapSchemeForPathBasedSites, SPUserToken userToken)
       at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken)
       at Microsoft.SharePoint.SPSite..ctor(String requestUrl)
       at FetchlatestDocDet6Jan.FetchLatestDoc6Jan.<>c__DisplayClass1.<FetchLatestDocVer>b__0() in d:\PublishWSFetchLatestDoc6Jan.asmx.cs:line 41
       at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
       at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
       at FetchlatestDocDet6Jan.FetchLatestDoc6Jan.FetchLatestDocVer(String fileName, String processID, String subProcessId) in d:\PublishedWS\FetchLatestDoc6Jan.asmx.cs:line 35
    [WebMethod]
            public DataTable FetchLatestDocVer(string fileName,string processID,string subProcessId)
                DataTable dtFiles = new DataTable("File Details");
                dtFiles.Columns.Add("File Name");
                dtFiles.Columns.Add("File Version");
                dtFiles.Columns.Add("File Url");
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    // implementation details omitted       
                //using (SPSite mySite = new SPSite(siteUrl))
                using (SPSite mySite = new SPSite("http://srvr:4000/sites/mysitecoll"))
                    using (SPWeb myWeb = mySite.OpenWeb())
                        SPList oList = myWeb.Lists["TEST DOC LIB "];
                        SPView oView = oList.Views["All Documents"];                  // SPQuery oQuery = new SPQuery(oView);
                        SPQuery oQuery = new SPQuery();
                        string query = "<Query><Where><And><Eq><FieldRef Name=Title/>" + "<Value Type=Text>" + fileName + "</Value></Eq>"
                                        +"<Eq><FieldRef Name=ProcessID /><Value Type=Text>"+processID+"</Value></Eq>"
                                        +"<Eq><FieldRef Name=SubProcessID /><Value Type=Text>"+subProcessId+"</Value></Eq>"
                                        +"</And></Where></Query>";
                        oQuery.Query = query;                    
                        oQuery.ViewAttributes = "Scope=\"Recursive\"";
                        SPListItemCollection collListItemsAvailable =
                         oList.GetItems(oQuery);
                        foreach (SPListItem oListItemAvailable in collListItemsAvailable)
                           // Console.WriteLine(oListItemAvailable["Name"].ToString());
                            SPFileVersionCollection versions = oListItemAvailable.File.Versions;
                            // If the file has versions, loop through all of the versions
                            if (versions != null)
                                if (versions.Count > 0)
                                    foreach (SPFileVersion version in versions)
                                     //   Console.WriteLine("Version Info:: {0}, {1}", version.VersionLabel, version.Url);
                                        DataRow dr = dtFiles.NewRow();
                                        dr[0] = oListItemAvailable["Name"].ToString();
                                    //Added data to the datatable
                                else
                                  //  Console.WriteLine("Version Info:: {0}, {1}", oListItemAvailable.File.UIVersionLabel, oListItemAvailable.File.Url);
                                    DataRow dr = dtFiles.NewRow();
                                    dr[0] = oListItemAvailable["Name"].ToString();
                                    dr[1] = oListItemAvailable.File.UIVersionLabel;
                                    dr[2] = oListItemAvailable.File.Url;
                                    dtFiles.Rows.Add(dr);
                return dtFiles;

    "The Web application at http://server:port/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing
    content, the system administrator may need to add a new request URL mapping to the intended application"
    Here are the most common reasons this error can occur:
    The code is executed on a different machine - The SharePoint object model (except the Client API) requires to be run on the SharePoint server itself. It is not possible to run the application on a server which is not within the same
    SharePoint farm the code is trying to access.
    Insufficient Rights on the site collection - The code is executed in context of an account which does not have read permission on the site collection
    Incorrect Url being used - Verify that the site works correct in a browser and double check that the server is correct registered in the AAM settings
    Incorrect bitness - The SharePoint object model needs to be executed with the same bitness as the operating system. That means you cannot use the SharePoint object model in a 32-bit application if the Operating System and SharePoint
    are installed as 64-bit version. Ensure to compile the project using the correct bitness (64-bit on a 64-bit machine vs. 32-bit on a 32-bit machine)
    Incorrect .NET framework version -  Ensure that the project is configured to use .NET 3.5. .NET 4.0 cannot be used with the current versions of SharePoint
    from Mr.Stefan's post, i have checked with my code : as per the first reason: (1)
    i am running the code from my  SP 2013 machine only. but the only difference is that, i am using a  asp.net web appln and have added a SP references of 15 hive and trying to make a  lists.asmx file.
    also checked the reasons
    2,3 ,4 ,5 all are  fine from my end.
    here just wanna know: abt the below approach : whether its Correct or NOT.
    create a plain GetDocsWebService.asmx file from asp.net 3.5 framework and  write the code for retrieving items from doc.lib using SPSite, spweb, splists, xmldocument and retrieve a datatable . [[[ i have added a web reference of sp 2013 microsoft.sharepoint
    dll from  isapi folder, in this GetDocsWebService.asmx project ]]
    i deployed this web service on my SP server's  new iis site, c:\inetpub\wwwroot\GETDOCSPUBLISH  site
    now, at present , am adding a  normal asp.net 4.5 web appln and add the  web reference of this custom web service and trying to consume.
    at this point am getting mulitpl errors: like
    1) platform not supported : am stuck with this error!!
    2) sometimes, am getting document not valid...<html> <head> document not valid........</html>
    for the above 2 errorrs, i still could not able to find a solution!!
    is it because, lists.asmx is not supported in sp 2013? we need to depend on rest-api/ecma/csom ?? 
    so my question is ,  what should be the correct ad most recommended approach  for reading doc lib/ splist  records/items from a  remote macihne.

  • When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until 10/2014.

    When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until October 2014. I contacted the IRA account managment company and they sais it's an Apple issue. Any ideas?

    Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
    Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
    The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
    Back up all data.
    Double-click anywhere in the line below on this page to select it:
    com.apple.idms.appleid.prd
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
    Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
    The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
    Credit for this idea to Christian Braukmueller of SAP.

  • How to solve Error SPSite - The Web application at address could not be found

    Hello,
    I am trying to find out the internal name of a custom SharePoint list columns, for this I have used following code snippet in my
    console application but getting below error. The site I am accessing is a public SharePoint web site. This code is working
    well with my local host site and i am able to get the internal names of any list columns but don't understand why this is failing with
    public SharePoint site
    For avoiding this issue I have done following steps:
    1.Rebuild the application
    2.changed the  platform target as "Any CPU"
    3.Visual studio and this public site is working in my admin account, but still I am getting the error!
    I use visual studio 2010 and SharePoint 2010
    please note the error I am getting
    Error : The Web application at https://public.sp.a5-group.com/ could not be found. Verify that you have typed the URL correctly.
    If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application
    Code Snippet
    static void Main(string[] args)
    using (SPSite Site = new SPSite("https://public.sp.a5-group.com/"))
    using (SPWeb web = Site.RootWeb)
    SPList splst = web.Lists["ListCard"];
    foreach (var field in splst.Fields)
    bool isHidden = splst.Fields[field.ToString()].Hidden;
    if (!isHidden)
    string internalName = splst.Fields[field.ToString()].InternalName; //This will give you the internal column name.
    Console.WriteLine(internalName);
    Console.ReadLine();

    I thin you need to have sharepoint installed on same computer and URL should be working on this computer.
    If this URL WEB APP is in your IISsite try to create disableloopbackcheck registry which should be help
    When you use the fully qualified domain name (FQDN) or a custom host header to browse a local Web site that is hosted on a computer that is running Microsoft Internet Information Services (IIS) 5.1 or a later version, you may receive an error
    message 
    http://support.microsoft.com/kb/896861

  • The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

    Hi,
    I have created on windows service to fetch sharepoint list ad update the list items.
    when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
    The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
    Code snippet
    SPSite sharepointSite = null;
                SPWeb rootWeb = null;
                try
                    //SPList current = null, previous = null;
                    string colmId = ConfigurationManager.AppSettings[ID_COLM];
                    List<TaskEntity> list = new List<TaskEntity>();
                    sharepointSite = new SPSite(URL);
                    rootWeb = sharepointSite.OpenWeb();
                    SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                    WriteEventLog("current" + current.Items.Count.ToString());
                catch (Exception ex)
                    ExceptionMethod(ex);
                finally
                    sharepointSite = null;
                    rootWeb = null;
    I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

    Hi mallela1,
    I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
    You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
    SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
    So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
    I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
    Regards,
    Nandini

  • ITS could not connect to the Web Application Server or the R/3 System

    ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
    The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
    Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
    I have not managed to get ../scripts/wgate/admin/! to work either.
    Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
    If yes, any ideas how?
    Many thanks
    Tim

    Hi Tim,
    You have to check the connection data in the relevant service file e.g.
    ~systemname   
    ~messageserver
    ~logingroup   
    ~appserver    
    ~systemnumber 
    ~routestring  
    ~connectstring
    If the Agate doesn't run you would see an ITS 500 error in the browser.
    Thanks and regards,
    Dieter

  • How to get the web application root ?

    Hi,
    We are developing a JSP/Servlets web application for Weblogic 5.1, that is distributed as a WAR archive, and so far we are unable to determine the web application root dynamically (from within the code in a Servlet or class). We tryed the servletContext.getRealPath("/") method, but it is not working due to the fact that we are deploying the application as a WAR file.
    We need to have this app root at the application startup, because it is widely used inside the JSP pages and the servlets of the web application. Also we would like to avoid setting it as a static parameter in the web.xml or elsewhere.
    Does anyone know how to do that? Any hint or suggestion is very much appreciated!
    TIA
    Stefan Buynov

    Thanks for your reply.
    As I said in one of my early posts, this variable (the application root) i used widely in the application (not only in JSPs, but also in classes).
    Another problem will be including JSTL in the project - first of all, I will have to put this tag where the variable is required (it will be quite exhausting), and also the specification of the application is strict - I might not be able to add this tag library, since the client won't like it.
    Anyway, thanks for your concern.
    Regards,
    Stefan

  • The web application root or the URL is invalid?

    Hey there-  So basically I'm setting up a simple ASP.NET FB4 project using IIS locally.  Before I get into my question, I can successfully create the project and test it on my machine.  My concern is that I can not receive a valid confirmation from FB when setting up the configurations.  For instance, if I place the correct paths:
    Web application root: C:\inetpub\wwwroot\weborb4
    Web application URL: http://localhost:1234/weborb4
    I always receive this error, The web application root or the URL is invalid.  Is there something I should be looking into?  Any suggestions are appreciated!

    Hi
    I filed the bug http://bugs.adobe.com/jira/browse/FBG-2539 for the same

  • Can I use the search engine and run a web application under the same iPlanet 6.0 virtual server?

    I've got an iPlanet 6.0 SP2 virtual server with the search engine enabled, which was tested and working. I then deployed a web application to it (mapped to "/"), and the web application works fine but now the search functionality is completely broken. Browsing to /search results in a directory index being displayed. Is there some trick to getting the two working together? I tried shuffling NameTrans directives around, but can only get either the search or the web app working, not both.

    Ok, I'm going to answer my own question now...
    The issue has been resolved after some additional experimentation on my part. There were two causes for my problem:
    1. The NameTrans directives in obj.conf are in the wrong order when Java and Search are enabled from the administration interface.
    Here's the admin server generated obj.conf I started with initially, when the web application was working, but requests to the URI "/search" returning a 404 error:
    <Object name="default">
    NameTrans fn="NSServletNameTrans" name="servlet"
    NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
    NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
    NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
    NameTrans fn="es-search-nametrans" from="/search"
    NameTrans fn="NSServletNameTrans" name="servlet"
    NameTrans fn="document-root" root="$docroot"
    </Object>
    Here's my obj.conf now, which works perfectly:
    <Object name="default">
    NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
    NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
    NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
    NameTrans fn="es-search-nametrans" from="/search"
    NameTrans fn="NSServletNameTrans" name="servlet"
    NameTrans fn="document-root" root="$docroot"
    </Object>
    The "servlet" NameTrans directive needs to go below all others which map a URI to a function or directory (but before "document-root"), or they break. This is consistent with the iPlanet documentation on NameTrans, but the admin server doesn't get it right!
    2. The developer who wrote the web application uploaded a directory named "search" in the root of his application, which caused the server to display a directory index of "/search", instead of executing the search function. I believe this issue is covered in an iPlanet knowledge base article.

  • "Safari could open this web site because the OS X can't open webpages that starts with amm"

    I try to install InDesign on my Mac after deleting a lot of programs, including all my adobe programs for some day ago. But when i try to download it just pop up a warning that tells me "Safari could open this web site because the OS X can't open webpages that starts with am

    use a different browser or use the cc desktop app to install your cc apps/trials, Download Adobe Creative Cloud apps | Free Adobe CC trial

  • Renaming of the Web Applications

    Hello Gurus,
    Can you please tell me the procedure for
    renaming the web applications from sap/bw/bex to sap/bw/bex_alias.
    Its very urgent.
    will assign max number of points.
    Thanks in advance,
    Sivanand

    Hi Sivanand,
    I am not very sure about this. But you can check the following transaction for customizing the Web Browser. I have never used it before. So no idea how much helpful it will be.
    SWR_WEBSERVER

  • Integrating a Java web application into the SAP NetWeaver Portal

    Hello experts,
    We have a requirement to integrate a Java based web application into the SAP NetWeaver Portal using iView/iFrame technology. The Java based web application is completely independent from the SAP environment but should be displayed as part of the SAP Portal environment. The other requirement is the main navigation menu for the Java based web application should be configured and provided in the SAP Portal.
    Any pointers on how exactly this can be done would be of great help.
    Also how can the SSO (Single-Sign-On) to the Java application be implemented so that the user can logon to the java application through the portal without providing the user credentials again.
    Thanks in advance.

    Hi,
    I think you can use URL iviews to integrate your java web application with EP. you have the option of doing SSO with the application as well.
    Have a look at the sap help material
    http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb51730e6a11d7b84900047582c9f7/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateURLiviewintotheSAPEP+portal
    Regards,
    Ganesh N

  • Migrating to Sharepoint 2013 from 2010 - Can you use the same URL for the Web Application without affecting the 2010 environment?

    Hi,
    I am currently trying to migrate our SharePoint 2010 environment to SharePoint 2013. The first thing I'm doing is creating a 2013 development environment to verify that this migration goes smoothly. I'm also doing this so that we will have a testing environment
    after the upgrade to 2013 is complete. 
    So here is my question: I have a 3 tier farm including; 1 app server, 1 wfe, and 1 sql server. I have made a copy of our SharePoint 2010 database and installed that on our sql server 2012 sever (This new environment is on 3 completely separate servers from
    our 2010 environment). I have also installed the prereqs and configured SharePoint 2013 on the App server and wfe servers, as well as configuring the necessary service applications (I have created a completely new 2013 database where I will migrate my 2010
    database content when I'm ready).
    I am now at the point where I need to create a new web application on the 2013 app server, where I will be migrating the copied 2010 database.  (Also note that we have a 2010 development site called https://[email protected])
    When I go to create a new web application in our 2013 dev environment, can I use the same url (https://[email protected]) to create this web app, or will this screw up our current 2010 dev environment?
    I'm new to SharePoint migrations, so I apologize if this is a stupid question.
    Thanks in advance for any insight you can share on this!
    Boe Barlage

    So, what you are recommending is that before I create a web application in my new 2013 environment, I need go into my hosts file on my 2013 app server and alter it to point to my 2013 wfe.
    Then after I do that, then I can create my new web application on my 2013 app server with the same url as my 2010 testing environment
    (https://[email protected]). 
    Then after that I should be able to access my new sharepoint 2013 environment at the same URL (https://[email protected])?
    I must be missing something.
    In your first reply, you told me to alter the host file on my 2010 app server and point it to my 2010
    wfe (I guess I thought it probably already is). You also told me to alter the host file on my 2013 app server and point it to my 2013 wfe. 
    so I am confused on after I do this, what url would I access my 2010 test environment, and what url would
    I access my 2013 test environment?
    I am fine with having my test environment as a different URL until I am totally ready to roll everything over and kill the 2010 site. But I want to make sure that when I migrate my database, none of the site links are broken.
    I also want to make sure that if I proceed this way, I want to be sure that I will be able to modify the URL to what my 2010 environment is (without a lot of headaches) when I am ready to kill the 2010 site.
    Thanks again for your help, it's much appreciated!
    Boe Barlage

  • The Web application could not be found

    Hello,
    I have a machine that has s share point portal .
    I create WCF on the same machine and set it on IIS and the identity of application pool is the administrator of machine 
              PlatformTarget : 64 bit ,  Framework : .net 4.5
    I have added sharepoint.dll as refrenece in WCF project.
    The identity 
    I have a method on the WCF :
              public void Test(string siteCollectionURL)
                    SPSite siteCollection = new SPSite(siteCollectionURL);
    When I call this method , I get the following Error :
             The Web application at http://[servername]:9090/sites/Dhofar could not be found. Verify that you have typed the      URL correctly. If the URL should be serving existing content, the system administrator may
    need to add a new request URL mapping to the intended application.
    Iam sure the url is correct  . So how can I solve it
    ASk

    Hi,
    For a better trouble shooting, I suggest you do as the followings:
    You can recreate a new WCF Service for SharePoint to test whether it works.
    More information about how to create WCF Service for SharePoint:
    http://www.thesharepointblog.net/Lists/Posts/Post.aspx?List=815f255a-d0ef-4258-be2a-28487dc9975c&ID=64
    http://msdn.microsoft.com/en-us/library/ff521584(v=office.14).aspx
    Best regards,
    Zhengyu Guo
    Zhengyu Guo
    TechNet Community Support

  • The web application at [URL] could not be found.

    Hi,
    I am trying to run a simple code like finding all the users in the SharePoint site.
    But I am seeing this error constantly no matter what I do!!
    The Web application at [https://xxxxxx] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
    I've looked into all the answers on the forums but still stuck with this error.
    I am a beginner in SharePoint, and I am really not sure about the AAM and IIS settings that needs to be set inorder to get rid of this error.
    If someone could point me in right direction that targets beginners that would be really helpful.
    Also, I noticed that my IIS is blank on the dev server that I am working on with Visual Studio and SharePoint installed on it. 
    Is this something that is causing this error?
    Thanks

    Note: you need to enter the SharePoint site URL 
    To authenticate:
    f you are connecting to office 365 then use the following code:
    using (srcContext = new ClientContext(txtUrlFrom.Text))
    SecureString passWord = new SecureString();
    foreach (char c in txtPasswordFrom.Text.ToCharArray()) passWord.AppendChar(c);
    srcContext.Credentials = new SharePointOnlineCredentials(txtUserNameFrom.Text, passWord);
    if you are using on premise SharePoint 2013 use this code:
    using (srcContext = new ClientContext(txtUrlFrom.Text))
    NetworkCredential credentials = new NetworkCredential(txtUserNameFrom.Text, txtPasswordFrom.Text);
    Example to retrieve data:
    Web srcWeb = srcContext.Web;
    List srcList = srcWeb.Lists.GetByTitle(srcLibrary);
    ListItemCollection col = srcList.GetItems(new CamlQuery());
    srcContext.Load(srcList.RootFolder);
    srcContext.Load(srcList.RootFolder.Folders);
    srcContext.Load(col);
    srcContext.ExecuteQuery();
    to retrieve users:
    Private void GetData(object obj)
    MyArgs args = obj as MyArgs;
    try
    if (args == null)
    return; // called without parameters or invalid type
    using (ClientContext clientContext = new ClientContext(args.URL))
    // clientContext.AuthenticationMode = ClientAuthenticationMode.;
    NetworkCredential credentials = new NetworkCredential(args.UserName, args.Password, args.Domain);
    clientContext.Credentials = credentials;
    RoleAssignmentCollection roles = clientContext.Web.RoleAssignments;
    ListViewItem lvi;
    ListViewItem.ListViewSubItem lvsi;
    ListViewItem lvigroup;
    ListViewItem.ListViewSubItem lvsigroup;
    clientContext.Load(roles);
    clientContext.ExecuteQuery();
    foreach (RoleAssignment orole in roles)
    clientContext.Load(orole.Member);
    clientContext.ExecuteQuery();
    //name
    //MessageBox.Show(orole.Member.LoginName);
    lvi = new ListViewItem();
    lvi.Text = orole.Member.LoginName;
    lvsi = new ListViewItem.ListViewSubItem();
    lvsi.Text = orole.Member.PrincipalType.ToString();
    lvi.SubItems.Add(lvsi);
    //get the type group or user
    // MessageBox.Show(orole.Member.PrincipalType.ToString());
    if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
    lvigroup = new ListViewItem();
    lvigroup.Text = orole.Member.LoginName;
    // args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
    UserCollection collUser = group.Users;
    clientContext.Load(collUser);
    clientContext.ExecuteQuery();
    foreach (User oUser in collUser)
    lvigroup = new ListViewItem();
    lvigroup.Text = "";
    lvsigroup = new ListViewItem.ListViewSubItem();
    lvsigroup.Text = oUser.LoginName;
    lvigroup.SubItems.Add(lvsigroup);
    //args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    // MessageBox.Show(oUser.LoginName);
    RoleDefinitionBindingCollection roleDefsbindings = null;
    roleDefsbindings = orole.RoleDefinitionBindings;
    clientContext.Load(roleDefsbindings);
    clientContext.ExecuteQuery();
    //permission level
    lvsi = new ListViewItem.ListViewSubItem();
    string permissionsstr = string.Empty;
    for (int i = 0; i < roleDefsbindings.Count; i++)
    if (i == roleDefsbindings.Count - 1)
    permissionsstr = permissionsstr += roleDefsbindings[i].Name;
    else
    permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
    lvsi.Text = permissionsstr;
    lvi.SubItems.Add(lvsi);
    // args.PermissionsList.Items.Add(lvi);
    DoUpdate2(lvi);
    catch (Exception ex)
    MessageBox.Show(ex.Message);
    finally
    DoUpdate3();
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Maybe you are looking for