Openbox and locales issue

Hi !
I have just realised that i can't see anything in Greek (my language ) .
I used to be able to do this with gnome but not with openbox . So subtitles and documents don't display correctly .
I have xorg-fonts-encodings installed and greek locales .
So what might be the issue ?
THanks!
Last edited by shak (2009-12-03 16:26:18)

Anyone please ?

Similar Messages

Openbox and NetworkManager issue

I've just installed a fresh copy of arch, and then also openbox + pypanel. because I have problem with setting up my wireless connection through wpa_supplicant I have decided to replace it with a network manager applet (like the one in ubuntu). I've visited this site and did as following:
1. added in ~/.xinitrc
pypanel&
exec openbox
(I'm using startx)
2. installed
pacman -S hicolor-icon-theme gnome-icon-theme
(because I use WM as stand-alone)
3. as next
pacman -S cnetworkmanager
4. then edited rc.conf
DAEMONS=( ... !network hal networkmanager..).
I've tried to run the command /etc/rc.d/networkmanager start as a root and a normal user - but both gave me [FAILD].
I'm trying to build very minimalistic system and making almost everything manual but I would like to have the applet manager starting with my pypanel or tint2 automatically (problems with wpa_supplicant and hidden SSID). I would like to achieve such a thing
EDIT: I would like also to get the speaker-icon on my panel.
Last edited by bierni (2010-07-16 16:01:44)

Oh, I'm sorry. I see what is happening here. You installed cnetworkmanager, which is a command-line only version of networkmanager. Uninstall that and then install network-manager-applet.
pacman -Rsn cnetworkmanager
pacman -S network-manager-applet
Then, in ~/.xinitrc do this:
pypanel&
nm-applet&
exec openbox
As for the volume, you should install volwheel from the AUR and also add that to your .xinitrc.
A few suggestions:
Instead of using .xinitrc, openbox has its own autostart file in ~/.config/openbox/autostart.sh. Edit that file to have pypanel&, nm-applet&, etc. Then do:
chmod +x ~/.config/openbox/autostart.sh
Then change your ~.xinitrc to this:
exec ck-launch-session openbox-session
The ck-launch-session will allow you to shutdown, reboot, etc from inside openbox and the openbox-session command makes openbox run the autostart.sh script.
I'll also suggest using Nitrogen or feh to set your wallpaper. They are in the wiki.

Openbox and proxy issues[Solved]

I am using openbox as my wm. I am facing a proxy issue.
I have added two functions in my .bashrc (based on https://wiki.archlinux.org/index.php/Proxy_settings):
function proxyon(){
echo -n "username:"
read -e username
echo -n "password:"
read -es password
export http_proxy="http://$username:$password@proxyserver:8080/"
export ftp_proxy="http://$username:$password@proxyserver:8080/"
echo -e "\nProxy environment variable set."
function proxyoff(){
unset HTTP_PROXY
unset http_proxy
unset FTP_PROXY
unset ftp_proxy
echo -e "\nProxy environment variable removed."
but after login when i run the command 'proxyon' and then launch firefox from openbox menu, firefox doesn't pick up the env variables but if I launch firefox from the same shell where i run 'proxyon' command firefox picks up the variables perfectly.
I have tried adding:
export http_proxy="http://$username:$password@proxyserver:8080/"
export ftp_proxy="http://$username:$password@proxyserver:8080/"
to .bashrc directly still launching firefox from openbox menu doesn't pickup proxy settings.
Also I want to know how do I add proxy exception for a perticular url.
Last edited by jaideep_jdof (2011-01-31 11:00:05)

Try adding them to .bash_profile. I think .bashrc is only read when launching a shell.
Edit .bash_profile, then log out and log back in to test it.
If nothing else works, you can write your own wrapper script for Firefox and launch it via the script in Openbox, e.g.
#!/bin/bash
export http_proxy="http://$username:$password@proxyserver:8080/"
export ftp_proxy="http://$username:$password@proxyserver:8080/"
firefox "$@"
It might not be the most elegant solution, but it's the first thing that came to mind.

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

PO and Goods Issue report

Dear All,
I want a PO report for which Import purchase and Local purchases Goods receipt done.(spares and accesories)
I also want a Goods issue report for which Imports and Local - stocked material or direct consumption material (eg cost center)
Please advice
Regards

I want a PO report for which Import purchase and Local purchases Goods receipt done.(spares and accesories)
In MB51,Enter GR Movement type,Enter plant,vendor no,purchase order no.,valuation type(if customized,seperate valuation type for import & local then you can get seperate reports),batch(if customized),posting date,transaction type.
In report,Click details list,modify layout to include vendor,p.o no,material doc.no,posting date,gr material,gr qty,uom,valuation type.
I also want a Goods issue report for which Imports and Local - stocked material or direct consumption material (eg cost center)
In MB51Enter goods issue movement type(261,201(against cost centere),etc.,,),plant,posting date,batch etc.,

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Goods Receipt and Goods Issue

Hi Gurus,
I am working on an interface where I need to work on a process that allows posting of Goods recipts and goods issue and for this I have been asked to create a custom transaction that will pull the data from the local file and replicate Goods receipt (MIGO) and goods issue process in Inventory Managemnt.
Can anyone out there please help me out how to approach this development and what would be easiest way to accomplish this task.
Help will really be appreciated.
Thanks
Rajeev...

1.   Create a custom report which get the data from input file.
2.   Populate the BAPI parameter with respective information and movement type.
3.   Call BAPI - BAPI_GOODSMVT_CREATE .
4.   Call BAPI_TRANSACTION_COMMIT.
For the custome report you can create transaction and execute.
I don;t have detail information - BAPI_GOODSMVT_CREATE with example. Better you search on SDN.
Regards
Nilesh

Slow startup and password issue.

Hi all...
Happy new year...!
As a little christmas present for myself I purchased a Crucial M4 256GB SSD for my MacPro 4,1 (2.26GHz, 22GB RAM, 10.8.2). I'm a semi-pro photographer and wanted a bit of a speed up for my processing etc etc. So yesterday I cloned my existing system drive to the SSD with Carbon Copy Cloner. I then installed the SSD in the spare superdrive bay (my other 4 bays are used).
Just as a background my previous startup/shutdown times on this machine where quite slow averaging around 90s for startup and around 45s for shutdown. I had assumed that this was normal and was just a slow syetm HD issue. When I changed the startup disk to the new SSD and booted up the startup time did decrease but not significantly... its now exactly 59s whilst the shutdown times go down to around 30s. In use the speed of the OS is massively improved with applications and local file copying blazingly fast. I've a few friends who upgraded MacBook Pro's and others macs with SSD's and their startups are around 10-15 seconds....!!! I'm not overly bothered by the slow startups/shutdowns but I am curious as to what might be causing these delays. In testing today I deleted everything unecessary from my user account startup items, disabled various apps and checked the /library/startupitems for anything that shoudnt be there. After a couple of hours trying I cant find anything that is effecting the startups and am lost. I'll likely just accept it and move on as in use the SSD is impressive but if anyone has any ideas it'd be appreciated!
A second thing that has happened is that whenever I try to delete/modify/move an app I am now asked to type in my user password. I have tried repairing permissions, checking the permissions of my .Trash folder etc etc but as of yet nothing has worked. Any ideas...??
Many thanks and Happy New Year yet again.
Richie

The traditional way an Operating System deals with "deleted" files is to remove ONLY the Directory information and simply add the data blocks to the free pool. Those "deleted" data blocks are not cleared.
This works in rotating drives because:
1. The logical block size is the same or larger than the physical drive block size.
2. Rotating magnetic media are block-for-block re-writable.
In SSDs physical blocks are much larger "superblocks", and re-writing a portion of a superblock is a slow and difficult read-modify-write operation. In addition, since the OS did not notify the drive what data are no longer needed, deleted data continue to be carefully maintained and re-written by the drive. Soon every write operation becomes a read-modify-write, and performance deteriorates.
In my opinion, this nearly-full condition is likley to cause drive failure. Something more than wishful thinking is required.
Apple enables TRIM on the drives they install directly. They do not do so for third-party drives, but that is likely because those drives have not been tested by Apple.
I have been using a very small SSD as a boot drive for a while, and periodically consolidate free space followed immediately by erasing free space with a third-party utility. I believe this has kept me out of trouble. My son has been using SSD in his laptop and doing nothing for maintenece, and he has killed two drives in a year.
Trim Enabler utility from groths seems to be working, and makes things simple. Your mileage may vary.
if I notice significant performance slips
You added a much lower latency drive and startup times did not improve significantly. Much of the time required for startup is needed for memory testing. The rest is largely attributable to disk Read/Write times. What more evidence do you need?

PowerMac G4 1.42 Dual - Kernel Panics and other issues

Hi,
I have a PowerMac G4 1.42ghz that has a number of problems.
Firstly, it kernel panics somewhat frequently. Not consistently on one app, but completely randomly. For example, I came home one day to find that it had woken from sleep and had a kernel panic message over my screensaver. It mostly kernel panics while using it though.
It also does something weird where it logs itself out randomly. The screen goes blue and returns me to the login window. Sometimes I can log back in, other times not. This happens on both network and local accounts.
I also noticed that in System Profiler that my L3 cache is failed. but I figure it should be able to operate without it.
Oh, and 2 of my RAM slots cause the computer to boot with Open Firmware errors.
Things I've tried:
Reset PRAM/PMU. No change.
Installed 10.5 on another hard drive. No change.
Swapped out videocard for a PCI one. No change.
Swapped out RAM with known good RAM. No change.
Installed 10.4. Haven't had the logout issue, but have had apps crash and kernel panics.
I'm pretty sure my problems are either motherboard or CPU related. I just want to know which one to try replacing first.

The only external devices I have connected are my Aluminum keyboard and mighty mouse. I occasionally plug in my iPod touch.
Here's three kernel panics.
Tue Sep 29 18:24:36 2009
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000095D0798 PC=0x00000000000B4A84
Latest crash info for cpu 0:
Exception state (sv=0x4778fc80)
PC=0x000B4A84; MSR=0x00001030; DAR=0x095D0798; DSISR=0x40000000; LR=0x000B48B8; R1=0x0000BF80; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000B48B8
backtrace terminated - frame not mapped or invalid: 0xBFFFD230
Proceeding back via exception chain:
Exception state (sv=0x4778fc80)
previously dumped as "Latest" state. skipping...
BSD process name corresponding to current thread: Finder
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac3,6
System uptime in nanoseconds: 3867053504449
unloaded kexts:
com.apple.iokit.IOSerialFamily 9.4 - last unloaded 9820196330
Tue Sep 29 17:19:11 2009
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000409878 PC=0x00000000000B4FE0
Latest crash info for cpu 0:
Exception state (sv=0x3b535500)
PC=0x000B4FE0; MSR=0x00009030; DAR=0x00409878; DSISR=0x0A000000; LR=0x0031EE70; R1=0x42B17AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0031EE5C 0x0031F134 0x0031F3E4 0x0032037C 0x0031C7CC 0x003203F4
0x003203F4 0x0033D710 0x0037DB44 0x0008E9FC 0x0002C100 0x00024B58 0x000B45CC 0x6765723E
Proceeding back via exception chain:
Exception state (sv=0x3b535500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42b21c80)
PC=0x9330B1F8; MSR=0x0200F030; DAR=0xF029AC58; DSISR=0x40000000; LR=0x93312120; R1=0xBFFFE9F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac3,6
System uptime in nanoseconds: 127374271862
Mon Sep 28 19:54:18 2009
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000409878 PC=0x00000000000B4FE0
Latest crash info for cpu 0:
Exception state (sv=0x3b535500)
PC=0x000B4FE0; MSR=0x00009030; DAR=0x00409878; DSISR=0x0A000000; LR=0x0031EE70; R1=0x42B17AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0031EE5C 0x0031F134 0x0031F3E4 0x0032037C 0x0031C7CC 0x003203F4
0x003203F4 0x0033D710 0x0037DB44 0x0008E9FC 0x0002C100 0x00024B58 0x000B45CC 0x6765723E
Proceeding back via exception chain:
Exception state (sv=0x3b535500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42b21c80)
PC=0x9330B1F8; MSR=0x0200F030; DAR=0xF029AC58; DSISR=0x40000000; LR=0x93312120; R1=0xBFFFE9F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
System model name: PowerMac3,6
System uptime in nanoseconds: 127374271862

MacBook Pro Health and safety issue: Potential Burn during normal use

Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

Mike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

Apache and Jserv issues - AppsLogin and AppsLocalLogin not working

Hi,
I am trying to understand the Apache and Jserv issues
Home page - http://11i-tst-02.cisco.com:38901 - working fine
This confirms that Apache core module is working fine. Does this confirm about the pls module also ?
Apps local login - http://11i-tst-02.cisco.com:38901/OA_HTML/AppsLocalLogin.jsp - throwing Java Exception
Request URI:/OA_HTML/AppsLocalLogin.jsp
Exception:
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.SSOManager.getAppsServletAgent(SSOManager.java:1727)
at oracle.apps.fnd.sso.SSOManager.getLoginUrl(SSOManager.java:316)
at oa_html._AppsLocalLogin._jspService(_AppsLocalLogin.java:410)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:479)
Is it related to SSO ? Because error mentions about SSOManager
But why does AppsLocalLogin need to go thru SSO ?
Doesn it mean Jserv issues ? I am able to see same message logged in jvm logs ?
Restarting Apache doesnt help
Servlet login - http://11i-tst-02.cisco.com:38901/oa_servlets/AppsLogin - throws Internal Server Erorr
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Apache log doesnt show any error
Servlet test works - http://11i-tst-02.cisco.com:38901/servlets/Hello
Example Apache JServ Servlet
Congratulations, ApacheJServ 1.1 is working!
OAM works - http://11i-tst-02.cisco.com:38901/servlets/weboam/oam/oamLogin - Navigating to SSO page for authentication
AOL test works - http://11i-tst-02.cisco.com:38901/OA_HTML/jsp/fnd/aoljtest.jsp
FND_WEB.PING works - http://11i-tst-02.cisco.com:38901/pls/QTCSTG/FND_WEB.PING
Connection test works - http://11i-tst-02.cisco.com:38901/servlets/oracle.apps.icx.common.ConnectionTest
So, my question is why AppsLogin and AppsLocalLogin are not working - if servlets / AOL / FND / OAM links are working
Is there issue with Jserv ?
Can someone please explain the significance of the above tests
And which tests need to pass for AppsLogin and AppsLocalLogin to work
Thanks

Since all the tests work fine as you stated above, I suggest you do the following:
- Rerun Autoconfig on all tiers
- rm -rf $OA_HTML/_pages
- Bounce Apache

SEM -BCS Trasaction currency and Local Currency

SAPGURUS
I have one issue , When the users are doing Half yearly BCS they see that for one company code for one item period values Local currency is diifeernt from
Transaction currency .
My question is why this Transaction currency is different from local currecny.
How to rectify this .
Are they missing any exchnage rate conversion .
Thanks in Advance .
are they missing any exchnage rate conversion .

Hi Dan Sullivan
Thanks for the quick reply .
One more question .
I see in the BCS T Curency as Euro and Local currency as Euro .
but the period values localy currency is different from Transaction currency .
I think the values should be the same if both T Currecny and Local Currency is same .
I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
I would like to know what would be the cause for the above .
Thanks in Advance .
Ravindrareddy.P.

Multi-Lang support and slides issue

First, is anyone here using slides-based Flash documents at
all? Whenever I post my (IMHO well-researched) questions/reports,
like the one linked to below, I never get an answer. By now I'm
ready to give up completely on slide-based documents and ready to
convert it all to "flat" Flash docs, but I'm just curious why the
numerous horrible bugs in slides get no response, did everyone else
but me know not to use them???
(older problem, actually more a report because there is no
solution, it's clearly a bug IMHO:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
Anyway, I found a new issue, which, like last time, I first
successfully and easily recreated using a fresh (slide-based)
document to make sure my AS code isn't interferring.
Doing the same experiment with bot a "normal" Flash document
and with a slide-based one, I created a dynamic text field and
followed (Macromedia/Adobe) instructions to setup multi-language
support (en,de) for the text field, using the Strings dialogue.
It all worked as it should in the regular Flash doc, but
nothing worked in the slide-based one. Right now I'm trying to see
if I can still get it to work using the Locale class and AS code,
but that doesn't seem to work either.
Again, by now I've pretty much decided to abandon slide-based
layout because of the bugs and the non-existing feedback, I'm only
curious if I was the only one who ever even tried slides...(?)

this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
Just taking bets I would say the two will match and your issue is simply the swing font thing.

Different Aquisition Value (APC) for group and local depreciation area?

Hello,
Is it possible to have different APC/acquisition value in your group and local depreciation area? We want to book the net book value as APC for local depreciation area while gross APC and accumulated depreciation are recorded in group depreciation area.
Group Depreciation Area
APC- 100
Accum Dep- 20
Local Depreciation Area
APC-80
I'd highly appreciate if you can give inputs.

Hi,
You did exactly whats required to acheive your requirement.
There is no more further implications by removing the tick for a while and reverting after go live.
While doing AS91, if you enter the APC value for 01 area, then that value will be automatically populated to the other dependent areas of 01 area. ( In case, if your other areas are in diff currency also, system will converts the 01 area value in to other area's curr by taking the exch rate).
Here you can still change the APC values for the all other areas. (The other areas should have been unticked for Identical APC value check box in OABC).
So while creating AS91, in tkaover values tab, enter APC value 80 in your 01 area and manually change the value in your group area. (REmove 80 and enter 100).
For accum dep, in takeover values tab, enter accum dep 20 in group area only. (like OABC, in OABD also the other areas should be unticked for the identical value check box).
This will resolve your issue.
Thanks,
Srinu

Openbox and locales issue

Similar Messages

Maybe you are looking for