Multi-Lang support and slides issue

First, is anyone here using slides-based Flash documents at
all? Whenever I post my (IMHO well-researched) questions/reports,
like the one linked to below, I never get an answer. By now I'm
ready to give up completely on slide-based documents and ready to
convert it all to "flat" Flash docs, but I'm just curious why the
numerous horrible bugs in slides get no response, did everyone else
but me know not to use them???
(older problem, actually more a report because there is no
solution, it's clearly a bug IMHO:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
Anyway, I found a new issue, which, like last time, I first
successfully and easily recreated using a fresh (slide-based)
document to make sure my AS code isn't interferring.
Doing the same experiment with bot a "normal" Flash document
and with a slide-based one, I created a dynamic text field and
followed (Macromedia/Adobe) instructions to setup multi-language
support (en,de) for the text field, using the Strings dialogue.
It all worked as it should in the regular Flash doc, but
nothing worked in the slide-based one. Right now I'm trying to see
if I can still get it to work using the Locale class and AS code,
but that doesn't seem to work either.
Again, by now I've pretty much decided to abandon slide-based
layout because of the bugs and the non-existing feedback, I'm only
curious if I was the only one who ever even tried slides...(?)

this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
Just taking bets I would say the two will match and your issue is simply the swing font thing.

Similar Messages

Biztalk 2013 R2 ESB toolkit support and Licence issues

Hi,
Currently we are using Biztalk 2013 R2 standard version and have not installed/configured ESB toolkit yet. Now i am exploring the options to use the ESB toolkit as it is pretty good for the exception management and it comes with nice portal as well.I have
used the ESB in the past with Biztalk 2010 so i have a favor for the toolkit.
But one of our consultant said that the ESB toolkit is not supported by Microsoft for the standard version and it is supported only with enterprise version of Biztalk. He also mentioned that once we configure ESB with standard version Microsoft does not
support ESB and also the entire Biztalk server So i am afraid of that and thought of validating the information with right people.
Can someone please answer the below questions for me?
Can we use ESB toolkit with Biztalk standard version? If so how about support from Microsoft? Does Microsoft support at least production server OR not?
Do we need enterprise version only for this?
I used ESB with Biztalk 2010 in the past and though there are minor issues i personally like it . But what are your thoughts of using ESB?
Here are the technologies we are using
Biztalk 2013 R2, Visual studio 2013 and SQL server 2014. Just to mention Visual studio is not available in test and production servers.
Thanks
JB

Hi,
Why you want to use BizTalk Standard Edition in Production Environment?
BTS Standard only run on a single BizTalk server with a maximum of two CPUs, maximum of five "BizTalk Applications",
However, Enterprise does not have such limitations
Yes, it is not supported and it has not been extensively tested by Microsoft on Standard Edition, but it doesn't mean you can’t
install it.
From BizTalk
Server: ESB Survival Guide has this requirement:
BizTalk Server 2010 Enterprise/Developer Edition
Understanding is:
ESB toolklit uses one of the five applications that can be deployed on BizTalk 2010 Standard Edition
ESB toolkit will work on BizTalk 2010 Standard Edition, but it's not supported
Requirements for ESB 2.2 with BizTalk 2013 is not specified as such, but I suspect the same limitation applies.
Refer: BizTalk
ESB Toolkit 2.1 on BizTalk Standard Edition environment , does it work ?
Rachit
Please mark as answer or vote as helpful if my reply does

JCOM and BEA support and license issues

After going round and round with first tier support, I'd like to post this message
to the newsgroup to clarify how jCOM finds the license.bea file.
Here is an e-mail I sent to support...
The beahomelist file gets created in a bea directory in the user's home directory
($HOME/bea/beahomelist).
The problem is that the WebLogic server and the Jcom classes are looking for the
license in two different ways.
WLS uses the $BEA_HOME variable and jCOM uses the user.home System property (this
may or may not be $HOME).
Your were incorrect when you stated that the WebLogic server needs to runnning by
the user that installed the software. Any user can start the server and use the
jCom classes as long as jCom can find the license, this requires that the user wanting
to use jCOM have a bea directory and beahomelist file in the directory that the user.home
system property resolves to.
It would be much easier for jCOM users to have the server and jcom find the license
in the same manner.
You've been so helpful.

"Michael Jones" <[email protected]> wrote:
>
After going round and round with first tier support, I'd like to post this
message
to the newsgroup to clarify how jCOM finds the license.bea file.
Here is an e-mail I sent to support...
The beahomelist file gets created in a bea directory in the user's home
directory
($HOME/bea/beahomelist).
The problem is that the WebLogic server and the Jcom classes are looking
for the
license in two different ways.
WLS uses the $BEA_HOME variable and jCOM uses the user.home System property
(this
may or may not be $HOME).
Your were incorrect when you stated that the WebLogic server needs to runnning
by
the user that installed the software. Any user can start the server and
use the
jCom classes as long as jCom can find the license, this requires that the
user wanting
to use jCOM have a bea directory and beahomelist file in the directory that
the user.home
system property resolves to.
It would be much easier for jCOM users to have the server and jcom find
the license
in the same manner.
You've been so helpful.
Hi Michael,
thanks a lot!! this was the right hint!!
Michael

Multi language support in SAP XI

Hi mates,
Is multi language UI supported in XI? Does SAP WAS Java has mutli language support i.e. can IR, ID, RWB, VA etc be viewed/edited in other languages like Spanish, French etc?
Since SAP XI is based on SAP Basis 6.40, I guess ABAP part of XI has mutli language support. Correct me, if I'm wrong.
Any special components need to be installed for this multi lang support purpose in SAP WAS ABAP & Java?
I appreciate your inputs/referrences/docs.
thx in adv
praveen

Yeah, I've seen IR, ID & RWB in English and German. But was wondering if it is possible in Spanish and French.
I looked at the NW master guide, but could not find any hints regarding this.
Thanks for your inputs, now I know that SXMB_MONI can be viewed in Spanish & French.
I appreciate any further inputs.
thx
pravene

OAM lockout page multi language support

We are using a static html page for "Custom Account Lockout Redirect URL". We have implemented multi-language support for lost password management except for the lockout page. What is the best way to provide multi-lang support for the lockout page?
Thanks.
Vinay

World appreciate any suggestions for this.
Thanks.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Accessory may not be supported error and charging issues with iphone4

Hello,
From past 2 weeks my Iphone4 (say A) keeps throwing error message "Accessory may not be supported" and doesn't charge the iphone after couple of minutes of charging. This happens when device is connected (for charging) to power outlet or to computer (USB port). I tried multiple original iphone/apple cables. The same cable allows me to copy pictures from this device/Iphone4 when connected to computer via same USB cable, but the device/iphone4 does not charge. The same cable and charger charges my other Iphone4 (say B) perfectly fine.
I am really frustrated as to why this is happening.
Searching on internet, it seems lot of people are facing this problem with their iphones and ipad devices and refer this issue as a software bug, which I also seem to think. How can it be the hardware issue when same charging port and same cables allows you to copy your pics etc. from your iphone device to your laptop but does not allow you to charge the same device? Same charging cable works with my other iphone4 and i tried multiple cables so I dont think it's a cable issue.
Any help is appreciated. I was expecting apple products to be better in quality but lately I have seen this issues quite often.
-RP

Make sure you are using an Apple approved charger and cable. The best would be the charger and cable that came with the iPhone in the original box.

Win 8.1. Core language and multi-language support.

HI,
I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
that my version of 8.1. has a different core language compared with what the program uses and this version is not multi-language supported. Now I wonder if there are various versions of the core language in 8.1. or is the core
language unique, supported by various language packets for menu's, guiding texts, etc. Why do I then need a multi-language supported program? Where can I put this question?
Regards
Sverre

I'd probably try them here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Hello, I am having a slight issue. When I opened my adobe photoshop elements 9, I received a message saying "This Application has requested the Runtime to terminate it in an unusual way." It then tells me to contact support, and I'm wondering what I shoul

Hello, I am having a slight issue. When I opened my adobe photoshop elements 9, I received a message saying "This Application has requested the Runtime to terminate it in an unusual way." It then tells me to contact support, and I'm wondering what I should do. Thanks!

Hi ,
Do you remember if you have installed some software prior to this issue?
Delete programs you never use.
If the issue reoccurs in Clean Boot, but works fine in Safe Mode, the cause may be the disabled hardware drivers. You may narrow down the
causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices
such as video adapter are not available to be disabled.
Tracy Cai
TechNet Community Support

Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have same issue still

I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler

Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
Go to settings/facetime and tap the ID there and log out and log in with new ID.
Go to settings/messages and turn off imessages wait 30 seconds and turn it back on, go to “receive messages at” tap on the ID there, sign out and sign in with new ID.
Go to settings/icloud and delete the account and when prompted select “keep information on your device” then turn it back on with the new ID.
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

Will there be support for Adobe Ideas with the Adobe Ink and Slide?

We're working on an update to Ideas to add support for Ink & Slide. Stay tuned for further information as to timing.
Kim
Adobe Ideas Team

Where we can set the Multi lingual support in BW system and Info Object?

Where we can set the Multi lingual support in BW system and Info Object?

Hi,
You can check that in RSD1 -> Info-object -> Master Data text tab -> language dependent or not.
Bye
Dinesh

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.

Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck

HT4623 I updated to iOS 6.1, now the mail application will not load. My settings for each email account are still in there, I have synched several times, and rebooted several times. Sill nothing. Why is there no support for upgrade issues ??

I refuse to pay for support for an issue caused by an upgrade. That is just ridiculous.

I'm having the exact same problem. When I select an email the mail application pauses for a couple seconds, the screen goes black and then I go to the home screen. Have you found anything more on this issue? Didn't have this problem before upgrading to 6.1.

Multi-Lang support and slides issue

Similar Messages

Maybe you are looking for