Opening multiple tables in data view

i've not been able to figure out how to open more than one table, each having a seperate tab. every time i click on a table it replaces the one already tabbed.
is there a way to do this? i.e. have more than 1 table opened in a seperate tab?

You can freeze a tab using the pin button in the tab's toolbar.
Even more useful is the Preferences - Database - Objectviewer - Automatically Freeze.
K.

Similar Messages

HOW TO OPEN MULTIPLE TABLES IN SQL DEVELOPER SIMULTANEOUSLY

hello i m new to sqldeveloper so plz dnt laugh if m asking silly question
HOW TO OPEN MULTIPLE TABLES IN SQL DEVELOPER SIMULTANEOUSLY

Use the 'pin' on your table editor
http://www.thatjeffsmith.com/archive/2011/11/sql-developer-quick-tip-pin-query-result-sets-and-plans/
Then open your 2nd table. If you want to see both at the same time, right-click on the table editor tab and select 'New Editor Tab Group'
Not a silly question, but no need to shout :)

Why Do Preview Sidebars Now Only Open In Table of Contents View?

All of a sudden Preview's PDF Sidebars, which always used to open in “Thumbnails” view (which I prefer), only open in “Table of Contents View” (which I hate) when I open any PDF. How can I get Preview to always use the “Thumbnails” view like before without having to select it every time I open a document? There doesn't seem to be a way to set this in Preferences.

Maybe the LaunchServices plist is messed up. You might try this:
To reset all of your files to open with the original default application, you need to delete a certain file. Go to your user folder, and navigate into the Library folder then into the Preferences folder. Find the com.apple.LaunchServices.plist file, and drag it to the Trash. Alternatively, drag it to the Desktop if you think you might change your mind and want to put it back later.
Over time, you may find that the Open With menu gets cluttered with duplicates, older versions or applications you thought you deleted long ago. To get rid of these, you need to use Terminal. Open up Terminal (from Applications/Utilities) and paste the following line:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Support/lsregister -kill -r -domain local -domain system -domain user
Press return and your Open With menu should have been cleaned up to only include the most current applications.
I found this tip at
http://361degrees.wordpress.com/2007/11/13/mac-open-with-menu-tips/

Data Federator: Unioning Multiple Tables into single view possible?

Hi,
I have three different databases with tables containing a portion of the same kind of data and I want to union the three different tables together in Data Federator to present a single logical view that has the complete set of data. Is this possible in Data Federator? How would I go about doing that?
Note: I do not have keys to join the tables together on since it's not simply extending the data in one table with additional data in another table and doing an inner join on a unique key. Instead, for example, there's a customer table for Finance, a customer table for Operations and a customer table for Sales and they all contain the same columns (with maybe slightly different names) and same type of data. I want to effectively union Finance, Operations and Sales together in a federated/virtualized view so applications can just query from that view to get all the customers from the three different databases.
I have been unable to do this so far since Data Federator requires each table in a mapping to have a relationship with the other tables in the mapping.
Thanks for the help.
Kerby

I figured out the original question using one mapping for each table but have a new question now.
Is it possible for an application to use the combined view from Data Federator to write back into the databases?
e.g. have an application use the target table in Data Federator and view the results, and based on that update the data in the underlying database that provides the data for the target table?
Thanks for the help.
Kerby

Insert into multiple table view

I have a view with multiple table query and and INSTEAD OF trigger on the view that inserts into multiple tables. When I attempt to do a commit out of a ADF Creation Form, I get the following error: ORA-01779: cannot modify a column which maps to a non key-preserved table ORA-06512: at line 1.
Has anyone had success inserting into multiple tables via a view that has more than one table?
Thanks,
Lisa

Lisa,
Sounds like your instead-of trigger may not be being called and you are trying to insert directly into the view.
I did write a [url http://stegemanoracle.wordpress.com/2006/03/15/using-updatable-views-with-adf/]blog entry about using a view with instead-of triggers last year.
John

Showing data in multiple tables for a page in smartforms

Hello freinds,
I am creating a smartform in which i have to show data which are different
tables .
i mean to multiple tables needed for showing dat their corresponding continuous data
and amount of data is also not fixed for table .
what is the solution .
kindly suggest me with elaborated steps .
Thanks & Regards
Digvijay Rai

Hi Digvijay,
Yes it is possible to show multiple table's data in a continues manner.
In smartform onlt the Main window could be extended according to the table length i.e if the data in a table exceeds the main window height, it is continued in the next page.
So you can declare as multiple tables in the main window.
for example if u have 3 internal table which r needed to be printed in a continues manner u can declare 3 tables in a main window which would be printed one after the other in a continues manner.
Regards,
Akash Rana

I can not see data in data viewer

Hi,
I use OWB 10g Relase 2. I have one table and I imported table metadata to OWB. I load data to table with pl/sql script, Now I do not see data in this table in data viewer. I see data in SQL*PLUS
I tried deploy table and run script to load again. Same problem.
I run mapping from this table. But target object is empty as well.
Thanks for advice
Jerry

my fail, I forgot commit transaction

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

Updating/Inserting multiple tables

Hi,
I've been trying to figure out how to update/insert multiple fields in 2 different tables with one RowSet. im new to java and have been using Creator for about 2 weeks
basically there are 3 tables: one containing user info(USER), one containing department info (DEPT), and one table relating the two (USER_DEPT). my form lets uers update, among others, their NAME in table USER, and DEPT_NAME in table DEPT.
These are all VARCHAR types.
I used the Clips provided by Creator to initialize and do the updating. i am using updateRow() to do the updating. the fields are bound to specific database fields. the RowSet is updatable.
in my app i chose some specific fields, but for the sake of avoiding pasting very long SQL queries lets just say i chose everything. some of the queries i tried:
SELECT *
FROM USER WHERE USER.USERNAME = ?This one works.
SELECT *
FROM USER, DEPT, USER_DEPT
where USER.ID = USER_DEPT.USER_ID
and DEPT.ID = USER_DEPT.DEPT_ID AND USER.USERNAME = ?this one gives me a Conversion Error message. i have no conversion going on whatsoever. i havent even learned how to use conversion yet.
another query i tried:
SELECT * FROM USER
INNER JOIN USER_DEPT ON USER.ID = USER_DEPT.USER_ID
INNER JOIN DEPT ON DEPT.ID = USER_DEPT.DEPT_ID
WHERE USER.USERNAME=?this one gives me no error. the app works except the database doesnt get updated. i have determined that when using this query updateRow() is skipped. i dont know why. the app keeps running in that it goes to the next page as defined by the XML, but updateRow() is never called.
so can anyone please tell me how to update/insert multiple fields in multiple tables using one RowSet PLEASE?
THANKS!

The only way this can be done with a single rowset is if you do your query against a view (instead of a join), and if your JDBC driver supports updates to multiple tables through a view. Otherwise, you're going to need to update the underlying tables individually.
Craig

Want to update data in a view based on multiple tables

Hi
I am facing a problem i want to update data in tables using a view. As that view is based on multiple tables so i am unable to update data. i came to know we can update table from view only if view is based on single table. so if anyone knows any alternative please let me know.
Thanx
Devinder

Devinder,
The table can be updated through a view based on multiple tables, if and only if the table is a "key preserved" table. Rather than explaining myself, i avoided the burden of typing by finding the material in Oracle Docs and pasting it for you :-)
If you want a join view to be updatable, all of the following conditions must be
true:
1. The DML statement must affect only one table underlying the join.
2. For an INSERT statement, the view must not be created WITH CHECK
OPTION, and all columns into which values are inserted must come from a
key-preserved table. A key-preserved table in one for which every primary
key or unique key value in the base table is also unique in the join view.
3. For an UPDATE statement, all columns updated must be extracted from a
key-preserved table. If the view was created WITH CHECK OPTION, join
columns and columns taken from tables that are referenced more than once
in the view must be shielded from UPDATE.
4. For a DELETE statement, the join can have one and only one key-preserved
table. That table can appear more than once in the join, unless the view was
created WITH CHECK OPTION.
HTH
Naveen

How do I reference multiple tables in SSAS Data Source View Named Calculation functionality?

Hi SSASers -
On the Data Source View node of SSAS Visual Studio Interface, I want to create a named calculation that references multiple tables. Something like: CASE WHEN tableA.Column1 = 'Y' Then tableB.Column1 ELSE tableB.Column2 End, but the compiler throws an error
here "Deferred prepare could not be completed".
What is the syntax for referencing multiple tables on this node or how else can multiple tables be used to create a calculated value in SSAS? I'm new to SSAS and so far have been building big views and building calculations this way. Another option is the
Calculation tab off the cube node but this calculation will need to be based off of dimensions AND measures so please provide a syntax example here also.
Thanks in advance!
Carl

Thanks Jiri! The named query functionality off the Data Source View node is exactly what I was looking for - it's just a view on the SSAS side of things instead of the relational dbase.
Sorry for the delayed answer verification - got pulled into something else last week. Carl
Carl

"Failed to open the connection" problem related to multiple tables in the report?

Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
 Dim o As Object = Session("ReportParams")
 Dim ReportURL As String = ""
 'Verify that there is a ReportParameters object
 If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
 Response.Redirect("/errors/MissingReport.aspx")
 End If
 ReportParams = CType(o, ReportParameters)
 'Verify that the report exists
 ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
 ReportPath = Server.MapPath(ReportURL)
 If Not File.Exists(ReportPath) Then
 Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
 End If
 InitializeReport()
 End Sub
 Protected Sub InitializeReport()
 Dim RD As New ReportDocument
 Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
 Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
 RD.Load(ReportPath)
 If ReportParams.SelectString <> "" Then
 Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
 Dim DS As New Data.DataSet
 Adapt.Fill(DS)
 RD.SetDataSource(DS.Tables(0))
 End If
 For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
 Dim FFD As FormulaFieldDefinition = Nothing
 Try
 FFD = RD.DataDefinition.FormulaFields(kvp.Key)
 Catch ex As Exception
 'Do nothing
 End Try
 If FFD IsNot Nothing Then
 Select Case FFD.ValueType
 Case FieldValueType.DateField, FieldValueType.DateTimeField
 If IsDate(kvp.Value) Then
 FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
 Else
 FFD.Text = "Date(1960, 01, 01)"
 End If
 Case FieldValueType.StringField
 FFD.Text = String.Format("""""", kvp.Value)
 Case Else
 'For now, treat these as if they were strings. If things blow up here,
 'we will need to add the appropriate formatting for the field type.
 FFD.Text = String.Format("""""", kvp.Value)
 End Select
 End If
 Next
 For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
 Dim TLI As TableLogOnInfo = T.LogOnInfo
 TLI.ConnectionInfo = CI
 T.ApplyLogOnInfo(TLI)
 Next
 DisplayedReport.ReportSource = RD
 End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.

Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team.

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

Regarding fetching data into internal table from D.B Tables, D.B View

Hi All,
I Have following 5 tables in my Database.
LTAP
TABNAME
FIELDNAME
KEYFLAG
LTAP
MANDT
X
LTAP
LGNUM
X
LTAP
TANUM
X
LTAP
TAPOS
X
LTAP
VLPLA
Z0MNH
TABNAME
FIELDNAME
KEYFLAG
Z0MNH
MANDT
X
Z0MNH
WERKS
X
Z0MNH
ZMANNO
X
Z0MNH
LGNUM
X
Z0MNH
AENAM
Z0MNH
BUDAT
Z0MNH
CPUTM
Z0MNH
LAEDA
Z0MNH
STATUS
Z0MNH
USNAM
Z0MNH
ZARDAT
Z0MNH
ZARTIM
Z0MNH
ZCLDAT
Z0MNH
ZCLTIM
Z0MNH
ZDPDAT
Z0MNH
ZDPTIM
Z0MNH
ZDRIVR
Z0MNH
ZINDAT
Z0MNH
ZINTIM
Z0MNH
ZLOAD
Z0MNH
ZNOTES
Z0MNH
ZPRDAT
Z0MNH
ZPRTIM
Z0MNH
ZSUPR
Z0MNH
ZTRAILR
Z3MANBOXIDHDR
TABNAME
FIELDNAME
KEYFLAG
Z3MANBOXIDHDR
MANDT
X
Z3MANBOXIDHDR
WERKS
X
Z3MANBOXIDHDR
ZMANNO
X
Z3MANBOXIDHDR
EXIDV
X
Z3MANBOXIDHDR
NLPLA
Z3MANBOXIDHDR
NLTYP
Z3MANBOXIDHDR
VLTYP
Z3MANBOXIDHDR
Z0PAL
Z3MANBOXIDHDR
Z3COMENT
Z3MANBOXIDHDR
Z3RECPT_FLAG
Z3MANBOXIDITM
TABNAME
FIELDNAME
KEYFLAG
Z3MANBOXIDITM
MANDT
X
Z3MANBOXIDITM
WERKS
X
Z3MANBOXIDITM
ZMANNO
X
Z3MANBOXIDITM
EXIDV
X
Z3MANBOXIDITM
ITEM_NO
Z3MANBOXIDITM
MATNR
Z3MANBOXIDITM
VEMEH
Z3MANBOXIDITM
VEMNG
Z3MANBOXIDITM
Z_CARTON
Z3MANBOXIDSERIAL
TABNAME
FIELDNAME
KEYFLAG
Z3MANBOXIDSERIAL
MANDT
X
Z3MANBOXIDSERIAL
WERKS
X
Z3MANBOXIDSERIAL
EXIDV
X
Z3MANBOXIDSERIAL
ZMANNO
X
Z3MANBOXIDSERIAL
ITEM_NO
Z3MANBOXIDSERIAL
SERNR
Based on all the above tables i need to fill in below internal table field as given below:
Internal Table I_TAB
ZMANNO
LGNUM
WERKS
EXIDV
ITEM_NO
MATNR
SERNR
VEMNG
VEMEH
VLTYP
NLTYP
VLPLA
NLPLA
ZLOAD
USNAM
STATUS
BUDAT
CPUTM
ZINDAT
ZINTIM
ZARDAT
ZARTIM
ZCLDAT
ZCLTIM
Extract data from Manifest header Z0MNH, Z3MANBOXIDHDR,
Z3MANBOXIDITM, Z3MANBOXIDSER and LTAP tables based on selection parameter.
Selection Screen will have folowing Select-option fields-
LGNUM
WERKS
ZMANNO
USNAM
ZLOAD
EXIDV
MATNR
SERNR
VLTYP
NLTYP
VLPLA
NLPLA
BUDAT
ZINDAT
ZARDAT
ZCLDAT
Based on above selection criteria i need to fetch above internal table fields data.
Then need to Move corresponding header and item data in ITAB_RESULT internal table.
I need to fetch above fields based on above 5 tables and put in final Internal Table.
Can anybody tell me the logic how can i write the same.
Also can anybody tell me i am trying to create a DataBaseView for
Z0MNH, Z3MANBOXIDHDR, Z3MANBOXIDITM, Z3MANBOXIDSERIAL and LTAP tables.
Note:
1. Z3MANBOXIDITM table may contain multiple material[MATNR] for same box-id[EXIDV] (with another line item).
2. Z3MANBOXIDSERIAL table may contain multiple record for one box id[EXIDV]+item_no[ITEM_NO].
But what are the TABLE/JOIN Conditions i need to write while creating DB View for above 5 tables.
Can anybody solve above 2 issues!
Thanks in advance.
Thanks,
Deep.

Hi Deep,
While creation of DB view just make sure abt the key relation between the tables. Based on that u can join the tables...First fetch the data from header table then by using for all entries u can fetch the line items data.
Hope this helps you. Reply for queries, shall post the updates.
Regards.
Kumar.

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
 OPEN CURSOR WITH HOLD S_CURSOR FOR
 SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
 WHERE CARRID IN L_R_CARRID AND
 CONNID IN L_R_CONNID.
 ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
 FETCH NEXT CURSOR S_CURSOR
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE S_S_IF-MAXSIZE.
 IF SY-SUBRC <> 0.
 CLOSE CURSOR S_CURSOR.
 RAISE NO_MORE_DATA.
 ENDIF.
 S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A999 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
 WHERE
* A~KNUMH = IT_999-KNUMH AND
 ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
 ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
* A~DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
 SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A999 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
 WHERE
* A~KNUMH = IT_999-KNUMH AND
 A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A997 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_997
 WHERE
* A~KNUMH = IT_997-KNUMH AND
 A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
 SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
 TABLE TP_DATA
 FROM A996 AS A
 INNER JOIN KONP AS B
 ON A~KNUMH = B~KNUMH
 INNER JOIN MARA AS C
 ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_996
 WHERE
* A~KNUMH = IT_996-KNUMH AND
 A~KSCHL = 'ZPRB' AND
* DATBI >= SY-DATUM AND
 LOEVM_KO = ''.
ENDIF.
SELECT MATNR "u7269u6599u53F7u7801
 MEINH "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
 UMREZ "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
 UMREN "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
 FROM MARM
 INTO CORRESPONDING FIELDS OF TABLE IT_MARM
 FOR ALL ENTRIES IN TP_DATA
 WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
 IF TP_DATA-KPEIN NE 0.
 TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
 TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
 ENDIF.
 IF TP_DATA-KSCHL = 'ZPRA'.
* TP_DATA-MEINH = 'ZI'.
* TP_DATA-KSCHL = 'B4'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPRB'.
* TP_DATA-KSCHL = 'L0'.
* TP_DATA-MEINH = 'ZI'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
* TP_DATA-MEINH = 'ZI'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
 TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
 ENDIF.
 ELSEIF TP_DATA-KSCHL = 'ZPR3'.
* TP_DATA-KSCHL = 'B2'.
 IF TP_DATA-KMEIN = 'ZI'.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ELSE.
 READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
 TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
 TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
 ENDIF.
 ENDIF.
 TP_DATA-MEINH = '01'.
 MODIFY TP_DATA.
E_T_DATA-MATNR = TP_DATA-MATNR.
E_T_DATA-KSCHL = TP_DATA-KSCHL.
E_T_DATA-KHETR = TP_DATA-KHETR.
E_T_DATA-KBETR = TP_DATA-KBETR.
E_T_DATA-KMEIN = TP_DATA-KMEIN.
E_T_DATA-DATAB = TP_DATA-DATAB.
E_T_DATA-DATBI = TP_DATA-DATBI.
APPEND E_T_DATA.
 CLEAR WA_MARM1.
 CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Opening multiple tables in data view

Similar Messages

Maybe you are looking for