OpenLDAP not Starting Specific error code 16
Hi....,
From last 5 days i was unable to start my openldap,I am working on Hyperion 11.1.1.3.
When i run db_recover,its giving me the Error as
db_recover: Finding last valid log LSN:file:1 offset 28
db_recover: PANIC:DB_NOTFOUND:No Matching key/data pair found
db_rocver: DB_ENV->open:DB_RUNRECOVERY:Fatal Error,run database recovery.
Please help me out in resolving the problem.
Thanks & Regards,
Priya.
If you have no backup and you cannot recover the db then there are not many options left to get your provisioning back.
If you can't restore then you could try the following
*1 To delete excessive log files, navigate via command line to a path resembling the following and run:*
C:\Hyperion\products\Foundation\openLDAP\bdb\bin\db_archive -d -h C:\Hyperion\products\Foundation\openLDAP\var\openldap-data
or navigate and run:
C:\Hyperion\products\Foundation\openLDAP\var\openldap-data ..\..\bdb\bin\db_archive -l
*2 To clean the .bdb files, navigate via command line to a path resembling and run:*
C:\Hyperion\products\Foundation\openLDAP\bdb\bin\db_recover -v -h C:\Hyperion\products\Foundation\openLDAP\var\openldap-data
or navigate into:
C:\Hyperion\products\Foundation\openLDAP\var\openldap-data and run (multiple times!) ..\..\bdb\bin\db_recover -v
*3 Restart OpenLDAP and Hyperion Shared Services*
If that doesn't work then your final option may be
How to reset OpenLDAP without losing registration information.
The quickest way to get back to a new blank openLDAP repository is to reset all the OpenLDAP data to the way it was just after the installation of Shared Services. At the end of this procedure, only the admin user will be available, but so long as you registered your products with the admin user and your Shared Services relational database is not touched, you will not have to reregister the products.
*1. Stop the openLDAP service*
*2. Remove all files under $HYPERION_HOME/SharedServices/9.x.x/openLDAP/var/openldap-data*
*3. Run $HYPERION_HOME/SharedServices/9.x.x/openLDAP/ConfigureHubLDAP.bat*
*4. Start the OpenLDAP service and the Shared Services web application*
*5. Log into Shared Services and select Administration -> Sync Native Directory*
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Calendar Server will not start - Specific error 1
I changed my server from Token ring networkcard to Ethernet and since then
the Calendar Engine service doesn't start anymore. The eventviewer displays
the message: The Calendar Engine service terminated with a service-specific
error 1. No dependent services will start either.
<P>
In the eng.log file is the following error:
Incorrect or missing entry in /etc/services or unable to read /etc/services
due to incorrect permissions or if using NIS database not created or not
rebuilt.
<P>
This is caused by altering the permissions on various system files, in this
case as follows:
<P>
In \winnt\system32\drivers\etc\services you should find entries similar to
the following:
<P>
unieng 5730/tcp
unisnc 5731/tcp
unidas 5732/tcp
<P>
Permissions for the file should be:
<P>
Administrators: Full Control(All)
Everyone: Read (RX)
NetscapeMTA: Read(RX)
SYSTEM: Full Control (All)
Owner: Administrator
<P>
Note: If you ever delete the services file or TCP/IP stack you will get this
error in the eventviewer on NT: service-specific error 1Hi,
Please log a TAR for this issue.
Thanks,
Lily -
MBAM - Encryption does not start. Error code 0x80041016
Hi,<o:p></o:p>
I'm having trouble getting MBAM and bitlocker working.
I followed the guidelines from MS, and setup my MBAM server and Bitlocker GPO. My test client is hit by the GPO - i can see the registry
settings pointing to the MBAM server, and the URL's are accessible by the client.
I get this error message in my client MBAM event log:
"An error occured while sending encryption status data"
"Error code: 0x80041016"
"Details: NULL"
I can't seem to find this error code referenced anywhere. Does anyone know what this means?<o:p></o:p>Hi,
I would like to share the following articles:
MBAM TechNet Guides:
Planning Guide: http://onlinehelp.microsoft.com/en-us/mdop/hh285653.aspx
Deployment Guide: http://onlinehelp.microsoft.com/en-us/mdop/hh285644.aspx
Operations Guide: http://onlinehelp.microsoft.com/en-us/mdop/hh285664.aspx
Troubleshooting MBAM: http://onlinehelp.microsoft.com/en-us/mdop/hh352745.aspx
Microsoft BitLocker Administration and Monitoring (MBAM) Documentation Resources Download Page
Hope this helps.
Vincent Wang
TechNet Community Support -
Dear All,
Kindly help me for the above.
I have tried out the following:
time sync with DC - checked
Re-install the feature and restart the servers
check registry key value winreg - local service account read only and added domain admin account
2 days googling, no luck
Generate cluster report and error error_mod_not_found (126) reported.
ThanksHi,
Now that you have a cluster in place and you installed a VM on this but is the VM HA enabled ?
even on a cluster your VM can still be single server. For creating a HA VM you need shared storage or shared VHDX. and you will need the broker services with out this there is no-way the VM will failover.
Check on teched on how to do this or my blog:
http://blogs.msdn.com/b/clustering/
http://robertsmit.wordpress.com/?s=shared+vhdx
http://robertsmit.wordpress.com/2014/01/14/virtual-hard-disk-sharing-shared-vhdx-storage-pool-usage-in-failover-clustering-windows-server-2012-r2/
http://robertsmit.wordpress.com/2013/06/12/windows-server-2012-configure-deploy-hyper-v-replica-broker-how-to-tee13-msteched/
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Service-specific error code 997 when starting up Oracle 9i service
Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully -
Bridge CC Adobe Bridge CC 6.0.1 Update Update is not applicable. Error Code: U44M2P28
(MAC) I downloaded Bridge CC and accidently deleted it unproperly. I just trashed it in the trash can and emptied it. I can't restore/ re-download it becuase it still says on Creative Cloud that Bridge is up to date, but when I looked online to properly delete it it Bridge CC is not in my Utilities/Adobe Installers? What do I do? I tried to redownload it online but it still won't work. It gave me this. PLEASE HELP!
Adobe Bridge CC 6.0.1 Update
Update is not applicable. Error Code: U44M2P28Nikiminn the U44M2P28 indicates and installer error. I would recommend reviewing your installation log files for the specific errors for the Bridge 6.0.1 update. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
-
When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.
When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.
-
I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!
update directly, Product updates
-
SMW00 separate action for specific error-code
Hello,
I know transaction SMW00 to send emails for bdoc-errors. Can I take seperate action for specific error-codes from specific organisational units?
Thanks for helping,
BartHi Bart,
Using standard action handler it is not possible but one other option is to take a copy of RSMW0_CONFIG_ERRORHANDLER and enhance it to send actions based on organisational units.
Rregards,
Surendar -
ACCOUNTING HIERARCHY MANAGER NOT STARTED,APPLET ERROR JBO-27022
제품 : FIN_GL
작성날짜 : 2004-05-20
ACCOUNTING HIERARCHY MANAGER NOT STARTED,APPLET ERROR JBO-27022
===============================================================
Problem Description
Account Hierarchy Manager 실행시 아래와 같이 JBO-27022 error발생하면서,
해당 기능을 사용할 수 없을 경우에 대한 원인 및 조치사항에 대해 언급한다.
Navigation PATH : GL Setup -> Accounts -> Manager
Error내용
oracle.jbo.AttributeLoadException: JBO-27022: java.sql.SQLException(?ㅈ)ㅇㅙ ?ㅙㅔ?
java.lang.String ?ㄿㅔ??ㅔ Java ㅀㅄㅐㅌㅈㄶ ㅋ???ㅔㅚ?ㄹ 13 ?ㅙㅅㄶㅍㅊ?ㄱㅌㄽ ㅀㄺ?ㅋ ㅇㅙㅅ￥ㅔㅚㅄㅏ ㅅㄵ
ㅍㅔㅓ?ㅔ?ㅍ?ㅄㅚㅄ?.
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java:39)
at oracle.jbo.JboException.<init>(JboException.java:354)
## Detail 0 ##
java.sql.SQLException: UTF8ㅀ? UCS2 ㅀㄳ?ㄱ ㅌㄽㅇㅙ ㅊㄿ?ㄿㅔㅛ ㅌ? ㅎ?ㅍ?ㅄㅚㅄ?: failUTF8Conv
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:43)
Solution Description
GL setup->financial->flexfileds->key -> segments 화면의
Structures region에서 Title에 입력된 Data가 20 chars(한글은 10글자)를 넘으면
위와 같은 Error가 발생한다.Can you get us somehow a stack? maybe this can help narrowing down the real problem.
thx clemens -
Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.This thread is pretty old, are you still having this issue?
-
Someone who can help me to do. Adobe Bridge CS6 Update 5.0.2 The update is not applicable. Error Code: U44M2P28
be sure to use the correct update (32 or 64 bit).
http://www.adobe.com/downloads/updates/ -
Adobe Creative Cloud CC Update is not being installed - error code 50
Hi,
I'm trying to update my Adobe Creative cloud client to the current version
At exactly 50% the installation stops and the message "Creative cloud could not be updated, error code 50" appears.
What can I do?The above solution should work ,
However , if still face issue ,
Try below steps (Windows)
1) Uninstall Adobe Creative Cloud from Control panel.
2)Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3)
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4)
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5)Run the Adobe Cleaner tool , if present remove Creative Cloud Desktop or Adobe Application manager.
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/…
6)
Click on the below link and download Creative Cloud setup and then right click on it and select " Run as Administrator" .
https://creative.adobe.com/products/creative-cloud -
HP recovery could not restore computer error code 0xe0ef000e
I bought a nice Solid State drive. Unfortunately it is not possible to upgrade my system to new hard drive. It fails every time with HP recovery could not restore computer error code 0xe0ef000e. This is after removing everything... graphics card, ram, cd drive... nothing is plugged in except the keyboard, monitor and mouse.
Windows 8 strikes again. Does anyone have any suggestions about how to actually use the recovery disks to reinstall windows 8 onto a new solid state drive. I hate this computer and wish I would have never bought it actually. It's been nothing but crap from day one.It's the HP 500-023w desktop. I ended up just buying a Winodws 8.1 OEM disk and installing that on the SSD. The recovery tool is a bit useless. Reading through various forum posts it seems I would have ended up spending hours trying to figure it out or else buying the recovery disks from HP. Just paying $89 for an OEM disk is a good deal by comparison since at the very least the computer has no bloatware on it now.
What a hugely unnecessary hassle really. Now if only I could get this heap of junk to boot with a PCI-e graphics card installed I might actually be able to use it with two monitors. Good grief.
Maybe you are looking for
-
Can anyone tell me why i bothered buying snow leopard? it doesn't seem to do anything. As for the assertion that it makes things happen faster - it doesn't if anything safari is slower. When i click safari then press cmd+t i get the mac equivalent of
-
I shoot in raw (Canon 7D) and first do some balancing in Lightroom CS5, going on to further process some images in Photoshop (CS5). If the exposure is OK, toning in Lightroom on its own is generally all that's necessary. Should I then be saving the f
-
Do I have to uninstall CS5 Extended to set CS6 up and running?
-
hi...when i want install the apps, it will appears : "Account not in This Store" Your account is not valid for use in Chinese store. You must switch to the Singapore store before purchasing", what should I do?
-
What kind of blank CDs can I use?
I cannot finish a burning a disk because right when it is nearly finished, it gives an error and ejects the disk, is there a special cd-r? When I am in the eMac I will get the error message, I am on the macbook now. Has anyone else had a problem with