SMW00 separate action for specific error-code

Hello,
I know transaction SMW00 to send emails for bdoc-errors. Can I take seperate action for specific error-codes from specific organisational units?
Thanks for helping,
Bart

Hi Bart,
Using standard action handler it is not possible but one other option is to take a copy of RSMW0_CONFIG_ERRORHANDLER and enhance it to send actions based on organisational units.
Rregards,
Surendar

Similar Messages

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to fine vendor specific error code in JDBC?

Hi all,
Is there any method which can be used to find vendor specific error code?
Thnx in advance

try{
// your code
catch(java.sql.SQLException ex){
int code = ex.getErrorCode() ;
Retrieves the vendor-specific exception code for this SQLException object.
String state = ex.getSQLState() ;
Retrieves the SQLState for this SQLException object.
}

Service-specific error code 997 when starting up Oracle 9i service

Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)

Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully

How can i set a global error page for all error cod

how can i set a global error page for all error code?
i don't want to leave a long list in the web.xml file.could any one help me?
thanks

If u have a common Error JSP named as ErrorPage.jsp
You need to have the following piece of code in the JSP as :
<%@ page isErrorPage ="true"%>
This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
Thanks and regards,
Pazhanikanthan. P

When I try to finalize my Imovie11 project it just errors out. I have finalized other movies without incident and it will save the trailer. I've emptied trash and run all updates and there isn't a specific error code popping up.

When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.

When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.

Having trouble updating creative cloud for desktop. (error code:2)

Having trouble updating creative cloud for desktop. (error code:2)

Hi Olaolu,
You can follow the article: Error: "Failed to install" | Creative Cloud Desktop which will help you to get your issue fixed.
You can also follow the thread: Creative Cloud desktop failed to update.(Error code: 2) where this issue is already discussed.
Let us know if it works or not.
Thanks,
Ratandeep Arora

Error : while creating record in infotypes for specific comany code

I am using custom infotype 9025 and 9028 for bonus scheme info for some comany code. E.G. 0004,0010 etc.
when I am takin an employee og comany code 0002 its not allowing to create data for that an giving error "No authorization to maintain &IT TEXT exists" .
So can any body help me out what is problem for that.

than delete the existing infotype
by PU00 and ITXXX here xx stands for the number of the infotype
and add the custom wage tpe u had created
sikndar

Service-specific error code -2146885628- MS SQL Server 2008 r2 Express

I have had no end of problems starting my MS SQL Server 2008 r2 Express.
My database program (Sage ACT! Pro 2011) starts fine. However when it attempts to start my default database, I get the following error message:
When I start my database within my application software (ACT Pro 2011) , I get the following error:
I am not abler to open any database with in ACT 2011. This error tells me that I must manually start SQL Server. I am running Windows 7 Pro, SP1. So I go to Services, and right click on SQL Server (ACT7) and click start and get the following error:
I have contacted Swiftpage and spent 2 hours on the phone with their technical support. They manually (via remote desktop connection) deleted ACT Pro 2011 and manually deleted SQL Server 2008 r2 Express (in registry and all files and folders).
I decided to upgrade, so ACT Pro v16 was installed. SQL Server still would not start automatically or manually. The ACT technical support person, after two very long hours said: that it is not an ACT problem, that I would need to turn to Microsoft for
a resolution as to why SQL Server will not start, and how to remedy this issue.
I hope someone can offer help or point me in the direction to get this very bad problem resolved. I cannot work without my CRM! can someone help?
Thanks!

This is the sum total of an error log in: C:\Program Files\Microsoft SQL Server\MSSQL10_50.act7\MSSQL\Log. There are no error logs for June 23 to July 14. This is the closest
date to the first time I experienced this SQL Server problem.
2014-07-15 09:32:43.31 Server Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-07-15 09:32:44.12 Server (c) Microsoft Corporation.
2014-07-15 09:32:44.12 Server All rights reserved.
2014-07-15 09:32:44.12 Server Server process ID is 2276.
2014-07-15 09:32:44.15 Server System Manufacturer: 'TOSHIBA', System Model: 'Satellite L775D'.
2014-07-15 09:32:44.27 Server Authentication mode is MIXED.
2014-07-15 09:32:44.27 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-07-15 09:32:44.63 Server This instance of SQL Server last reported using a process ID of 6980 at 7/15/2014 9:13:22 AM (local) 7/15/2014 1:13:22 PM (UTC). This is an informational message only; no user action is required.
2014-07-15 09:32:44.63 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-07-15 09:32:46.39 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-07-15 09:32:46.40 Server Detected 4 CPUs. This is an informational message; no user action is required.
2014-07-15 09:33:00.47 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-07-15 09:33:33.57 Server Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-07-15 09:33:37.59 spid7s Starting up database 'master'.
2014-07-15 09:33:40.89 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-07-15 09:33:42.39 spid7s SQL Trace ID 1 was started by login "sa".
2014-07-15 09:33:42.56 spid7s Starting up database 'mssqlsystemresource'.
2014-07-15 09:33:42.86 spid7s The resource database build version is 10.50.4000. This is an informational message only. No user action is required.
2014-07-15 09:33:46.59 spid10s Starting up database 'model'.
2014-07-15 09:33:46.58 spid7s Server name is 'Harold_Schultz\ACT7'. This is an informational message only. No user action is required.
2014-07-15 09:33:46.59 spid10s Error: 17204, Severity: 16, State: 1.
2014-07-15 09:33:46.59 spid10s FCB::Open failed: Could not open file e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2014-07-15 09:33:46.85 spid7s Informational: No full-text supported languages found.
2014-07-15 09:33:46.85 spid10s Error: 5120, Severity: 16, State: 101.
2014-07-15 09:33:46.85 spid10s Unable to open the physical file "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2014-07-15 09:33:46.85 spid7s Starting up database 'msdb'.
2014-07-15 09:33:46.85 spid7s Error: 17204, Severity: 16, State: 1.
2014-07-15 09:33:46.85 spid7s FCB::Open failed: Could not open file e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2014-07-15 09:33:46.85 spid7s Error: 5120, Severity: 16, State: 101.
2014-07-15 09:33:46.85 spid7s Unable to open the physical file "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2014-07-15 09:33:47.04 Server Warning: Support for the VIA protocol is deprecated and will be removed in a future version of Microsoft SQL Server. If possible, use a different network protocol and disable VIA.
2014-07-15 09:33:47.33 Server Virtual Interface Architecture protocol is not supported for this particular edition of SQL Server.
2014-07-15 09:33:48.03 spid7s Error: 17207, Severity: 16, State: 1.
2014-07-15 09:33:48.03 spid7s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2014-07-15 09:33:48.04 spid10s Error: 17207, Severity: 16, State: 1.
2014-07-15 09:33:48.04 spid10s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\modellog.ldf'. Diagnose
and correct the operating system error, and retry the operation.
2014-07-15 09:33:48.08 spid7s File activation failure. The physical file name "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2014-07-15 09:33:48.08 spid10s File activation failure. The physical file name "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2014-07-15 09:33:48.15 spid10s Error: 945, Severity: 14, State: 2.
2014-07-15 09:33:48.15 spid10s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2014-07-15 09:33:48.38 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event
log that may indicate why the tempdb files could not be initialized.
2014-07-15 09:33:48.39 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2014-07-15 09:33:48.38 Server Error: 17190, Severity: 16, State: 1.
2014-07-15 09:33:48.38 Server Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-07-15 09:33:48.42 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-07-15 09:33:48.44 Server Error: 17182, Severity: 16, State: 1.
2014-07-15 09:33:48.44 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-07-15 09:33:48.44 Server Error: 17182, Severity: 16, State: 1.
2014-07-15 09:33:48.44 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-07-15 09:33:48.44 Server Error: 17826, Severity: 18, State: 3.
2014-07-15 09:33:48.44 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-07-15 09:33:48.44 Server Error: 17120, Severity: 16, State: 1.
2014-07-15 09:33:48.44 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

Account-specific (Error code -36) issue -- I'm stumped.

Hello All:
I'm at my wits' end trying to figure this one out; I've searched the forums (and about half of the internet), but I haven't yet run across this particular scenario:
Client's Mac:
G4/500 running Mac OS X 10.3.9
(there are 6 other Macs in this office; no others are experiencing this problem)
Shared PC:
WinXP SP2 running on an older beige Gateway PIII box.
Shared folders set up (with sharing permissions verified thoroughly).
Problem
The client is unable to connect to shared folders on the WinXP box; every time she tries, she's presented with the error message:
[quote]The Finder cannot complete the operation because some data in (smb://IPA.DDR.ESS.HERE) could not be read or written.
(Error code -36).[/quote]
This happens no matter how I authenticate (using her creds or mine -- I'm a domain admin, so I should have access) when trying to connect from her admin account. However, I am able to connect to any shared volume on the same machine if I log in on another admin account on the Mac (even if I use her credentials).
Obviously, it's not a connectivity or hardware issue, since the same computer is connecting without a problem (using a different account). Also, none of the other Mac users are having this problem. All users are on the same subnet.
Here's what I've tried so far in my troubleshooting process:
1. I verified sharing setup and permissions on the WinXP volume;
2. I tested to ensure other Macs could see the share -- they all could;
3. I've run the Mac OS 10.3.9 Combo updater;
4. I've updated Symantec Antivirus on the WinXP box (per the recommendation of an artice; but clean dogs?never hurts);
5. I've searched high and low with Google.
Since I can get to it from other accounts on the same computer, I'm inclined to believe there's some sort of user preference file corruption (or some other account-specific problem).
Is there a .plist file in the user's account that could be removed (and allowed to rebuild) to restore connectivity to the shared volume? Or is there some sort of utility to "rebuild" a user account? ...or am I barking up the wrong tree here?
Any assistance would be most appreciated!

Thanks for the suggestion, Charles.
I eliminated hardware as a culprit early in the troubleshooting process, since internet connectivity was still robust.
I also thought that the Directory Access information may have been to blame; that's why I went so far as to do a combo updater (as a sort of "whack on the head" measure).
But when I was able to log on the same Mac using a different account and I did not experience the issue, I started looking at account-specific issues.
From what I understand, Directory Access (SMB inclusive) are system-wide settings affecting all user accounts. Given that assumption, I was thinking there might be some sort of user-specific preference file that might be to blame here, but I don't want to just start blowing out .plist files willy-nilly until I can obtain a better understanding of which one(s) might be at fault.
My fallback plan is to simply create a new account for the user and migrate all her information over folder-by-folder, but I'm hoping there's an easier fix (plus, I'm looking at this as an opportunity for a better understanding of user account structure).

Solution for Finder Error Code 0?

Hi Guys,
I keep struggling with the Finder Error Code 0 while copy-pasting a lot of files from my iMac to external hard drive etc.
IS there a solution for this?
Many thanks
Bob

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Unable to Prepare Project for Publishing (error code -2015)

I have imported a Hi-def video from my Panasonic camera, edited it and am now trying to export it.
When I click on share ---> Export Movie ---> then click on large
I get the following error:
*Unable to prepare project for publishing*
The project could not be prepared for publishing because an error occurred. (Error code = -2015)

me no Unix expert. but -2015 reads as 'invalid time' of a movie file... whatever that means.. (?)
have you set time&date in your recording device correctly...?
have you set time&date in your Mac correctly...?
... that is only wild speculation, sorry, ... but worth a try

Delete authorization for specific Company Code

All,
For a specific transactions, our users may only run the transaction for a specific company code. Transaction is TPM55A
What authorization object do I need to add to my role, so the users have only authorization for let's say Company code range 1000 - 1050.
Many thanx for help
kr,
Stef

Hi Stef,
Please try to add this authorisation object manually F_BKPF_BUK- Authorisation object for company code.
In the filed BUKRS you can maintain the company code as you required for the users.
I hope this may help you in resolving the issue.
Thanks
Karthick

Handler for http error code 500 is outside of app server

Hello,
I am wondering if it is possible to redirect to a error page outside of app server in web.xml, this is required by our customer. For example:
<error-page>
<error-code> 500</error-code>
<location>http://my-different-appserver/errorpage.jsp</location>
</error-page>
Thanks a lot,

Hello,
I am wondering if it is possible to redirect to a
error page outside of app server in web.xml, this is
required by our customer. For example:In about 30 secs of googling I found this modification to an htaccess file.
.htaccess
ErrorDocument 500 /error-docs/500.shtmlWhy do continue to post such questions when they can be answered with 10 s of work.

SMW00 separate action for specific error-code

Similar Messages

Maybe you are looking for