Operating smart form with word document

hi all
I want to print text of word document in main window of the smart form.
First tell me can I do this???
If yes, then how??
With Regards,
Jayavant.

Hello Roseanne,
As i get you right, the form doesn't display one value (you wrote document, but is dont know excatly what you mean) in the right (or at least expected) way and you can't find the value in the smartform.
So my next question is, what your meaning of physical and locical records? I can only imagin the there are 2 recordes in the database and only one is printed in the form. If im wrong please correct me.
First of all you should be able to find the spot where the data is writen to the form. Trie to narow down area where it will be printed by commanting out block by block ( conditions tab 1 = 2).
If you find the right node do the same thing on the subnode until you get the node where the error appers.
Everything that is printed in the form have to be anywhere in a node/table/loop and so on.
You can also tie to set a breakpoint in the globae area, at the beginning and serch the structres for the entry which is wrong. Maybe this will help you to find the right spot.
Good luck with fixing the form!
Br,
Nikolaus

Similar Messages

  • What is the best way to work with Word documents in The InDesign CS4???

    I work in Microsoft Word 2007 and all my documents have *.doc format.
    What is the best way to work with Word documents in InDesign CS4???
    David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
    How about pasting RTF or Text Document???
    I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
    So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
    It loks like wasting time. I sthere another way of making such layout???  What kind????

    It's best to place any text.
    You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
    This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
    Peter

  • Smart form with 2 different pages

    Hi Experts
    I have a requirement, I need to develop a smart form with 2 different pages, and each page has different data and presentation of the data also is different.
    In the first page I need to display the contract data with the line items and amounts and in the second page I need to display the partner details with their contact details. From second page onwards it may go further based on the partners exists for that contract.
    Plesae advice me best possible way to achive this.
    Thanks
    Praveen

    Hi Praveen,
    Create two Pages:
    First Page:
    In general Attributes section- Keep page2 as next page
    Create Main window and under that
    Keep the text elements for contract data of line item and amounts as required
    Second Page:
    In general Attributes section- Keep page2 as next page
    create main window and under that
    get all the partner details of line item into an internal table(using program lines node).
    Now use 'Tables' node which behaves as loop for this internal table (so that it continues further if it contains date more than 1 page)
    And display the values in smartform using Text node
    Regards,
    Swarna Munukoti.

  • Best way to work with Word documents on Mac?

    Just bought a Mac Pro, tired of the faults of MS/Windows. BUT I work a lot with Word documents, and have to keep doing so to interact with colleagues, I understand there are two possible ways - either install on my Mac also a Windows, and work in original Words, or use iWork.
    What is the experience - is iWork fully compatible with Words? Interface problems when sending/editing back and forth? Grateful for opinions and tips!

    I too was worried about Word docs when I transitioned over to Pages. I have not found any Word document so far that Pages could not open, that said, most of the time you will get a notice saying that some errors have occurred in the process. Most of these seem to be related to fonts, but if you have tables and spreadsheet segments, they can come out looking scrambled in Pages.
    I can't comment on the export of Word docs and how they open on PCs but I do know that the PDF exporter from Pages is great (so far).
    In fact Pages is great all around for simplicity, ease of use and dependability.
    iWork: <$100
    Office: >$350
    No Contest IMHO

  • Download form in word document

    Hi,
    Can i download the smartform in word document. I know it is possible in PDF, but my requirement is they want that form in word document.

    Hi,
    you can find usefull documents from the following link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    Hope it helps.
    Regards.
    Sukanya

  • How to populate smart form with new values

    Hi!
    I am new to smart form . Can anybody help me in how to populate smart form with some new fileds. Actually i have to populate credit memo form with some customized values..

    Hello,
    Please elaborate your query more in order to be comprehendable.
    Regards,
    Shehryar

  • OTM can not open attachment with Word Document(*.docx)

    With more and more use of Word Document(*.docx) (version 2007). OTM (Oracle Test Manager) can create an attachment with it, but can not open attachment with Word Document(*.docx). Is this a problem for anyone else? Any wok around?
    Thanks
    Katherine

    I am using OTM version 9.2 and the Word document (*.docx) attachment can be opened in this.
    For being able to open a docx file, try to attach an word document from the file option in the Requirements, Test or Issue tabs in OTM , once you upload the file, please check if location is " in Database" Else click update DB and upload the document.
    Once the attachment is attached to the Attachment section in the right pane, clicking on the attachment will open the *.docx document.
    This has worked for me.
    Hope this helps.

  • How to create barcode in Smart Forms with MS Word as Editor?

    Hi,
    I created a character format for a barcode in a smart style.
    The problem is that I do not know how to assign it to the text in Smart Form because the Editor is MS Word and not the normal Editor.
    Any suggestion or idea.
    Thanks & best regards
    Viktoria

    Hi and thanks for the fast reply,
    I have created a smartstyle and also a characterformat for the barcode. This is not the problem.
    I call the layout via HRFORMS. The Form Builder for Smart Forms is called and the Editor for the text nodes is preset and is the MS Word editor. This cannot be changed. I tried different things also in the settings. The normal text editor cannot be called.
    I choose and enter the field that I want to convert into the barcode &wa_barcode&. I do not work with standard texts (SO10). The text field is a normal text node in Smart Forms. The character format that applies converts the number in the variable field into the barcode.
    In the MS word editor I have only formats that are in the office environment (arial, ...) I do not see the formats that I created in smartstyle also when I assign it in the output options of the text node.
    So maybe I have to work like this for now. Swich between HRFORMS and SMARTFORMS when working with barcodes. In the Smart Forms transaction it is the normal editor where I can see the paragraph/ character formats from smartstyle.
    Thanks and best regards
    Viktoria

  • Smart Forms or Word

    Hi,
    I'm in a SAP-Standard-Web-Application and there I have to create some forms.
    The forms should contain a lot of static text und some dynamic text (like name, address, amount, description)
    from the application.
    Now I have the possibility to do it in Smart Forms or with Word.
    What's are the main differences/advantage/disadvantage between the two systems ?
    what's your expert knowledge?
    thxs in advance,
    kind regards,
    Franz

    Hi,
    Suppose if dynamically you wants to add new fields or lines, then you can go ahead with word doc.
    Otherwise, you can go with smartforms as the look and feel will be too good.
    Regards,
    Prabu

  • Smart Forms with editable fields and signature field provided by Webdynpro ABAP

    Hi,
    i've created an interactive smart form.. Everything fine. The preview of the adobe livecycle designer looks excellent, every field is editable, the signaturefield is signable...
    But when i try to test my form using transaction SE80 i'll get a pdf without any signable field, without any editable textfield and so on
    I've used the standard printer ZPDF1 for that purpose. (PDF1)
    Every value provided by the interface is displayed correctly in the pdf , but no field offers the possibility to change values anymore the pdf looks like a real printed document.
    I want to build a webdynpro application where the user gets a pdf in the last step, where he or she is able to edit single values in the prefilled PDF and afterwards to sign this document with his/her digital certificate...
    hope you could help me
    kind regards
    christian

    solved by myself.
    You have to install and configure the reader rights credentials mentioned in note 736902

  • Best way to work with Word documents?

    Hi! New Mac user, bought a Mac Pro, tired of Windows many faults. I work a lot with texts, documents, and I'm used to Word. And working with colleagues in a Word world..
    What is the experience of compatibility? Is iWork functioning good enough for receiving, changing/editing and returning documents, or should one have Windows installed in parallell, with the original Word programme? And same question about presentations - PowerPoint versus/interchangeable with Keynote?

    OpenOffice 3.1
    Virtual environment for Windows, but I wouldn't touch Parallels. Fusion or Sun's VB.
    iWork '09
    http://discussions.apple.com/category.jspa?categoryID=253
    http://www.apple.com/support/iwork/

  • Working with Word Documents in Oracle8iDB

    Hi, i'm trying to develop an application that save the text that I handle in Word Format and then save this file to my database. I already readed the documentation and tried some examples but I can't make it work. My Table name is TEXT with the following structure:
    ID NUMBER(8)
    DOCUMENT BLOB
    Anybody that can help me with the code to insert a Word document in the document field??
    Thanks
    Leo

    If what you want to do is to save your document as Word format and then store it in your database, there are two ways to do it.
    1. Use internet File System
    When you save your Word file, simply save it using internet File System. This might be the easiest way.
    2. Use SQL*Loader
    Read http://otn.oracle.com/sample_code/products/intermedia/htdocs/avi_bulk_loading.html for more details.

  • "Import Error" with Word Document (google doc)

    I tried to open a word document that I created using Google's online document program and I keep getting 'import error' when I try to open with Pages. I tried it several times on several different .doc documents created with the Google program and get the same error message.
    G4 Powerbook   Mac OS X (10.4.8)  

    It's likely they aren't true Word documents & there is some formatting or feature that the translator in Pages can't handle. Could you post a link to where these can be created so others of us can try it?

  • Smart forms with barcode

    Hi Experts,
    I have requirement to create bar code in smart form, the barcode format will be 39 full ASCII .
    I have tried to create a character format with this font but it is not available in smartstyles.
    Can you please help me how Can I create this and get into smartstyles ?
    Thanks in advance...

    run tcode SE73, create a new system barcode and select "New Barcode Technology". Then select the Code 39 Symbology.
    As far as i know, SAP supports the full ASCII mode of the Code 39.
    The difference between Code 39 and Code 39 full ASCII is that you are able to use for example uppercase and lowercase letters within your barcode.
    Code 39 is restricted to 44 characters. In Full ASCII Code 39 Symbols 0-9, A-Z, "." ,and "-" are the same as their representations in Code 39. Lower case letters, additional punctuation characters and control characters are represented by sequences of two characters of Code 39. For example, if you want to use "a", you have to use the encoding "+A".
    I hope, this helps you a bit.
    regards
    Ralf

  • Error in smart form with currency  fields

    while i am using with currency fields in samrt forms error is comming in while i am giving print-preview in se38 "<b>Reference field WA_EKPO-NETPR unknown in form."</b>

    In smart forms if we want to display quantity and currency fields. We cannott directly display currency field and quantity fields.
    To display the mdo like this
    Ex: GLOBAL Definitions
    WA_NETPR LIKE EKPO-NETPR
    For that we have to create an extra variable in global definitions
    Ex: netpr FIELD of EKPO
    CREATE program lines and specify WA_NETWR = itab-netpr.
    Close the thread once your question is answered.
    Regards,
    SaiRam

Maybe you are looking for