Operation mappings with multiple mapping programs

Hello all,
I have 2 message mappings:
<source structure> -> <middle structure>
<middle structure> -> <IDOC
I don't know how to build service interface and operation mapping.
Thanks,
Natalia.

>
Stefan Grube wrote:
> For the middle structure you need no service interface, just a message type.
>
> You upload the IDoc structure, so you need only create one service interface with message type "source structure"
>
> In operation mapping (source -> idoc) you add both message mappings.
>
> Edited by: Stefan Grube on Jan 26, 2011 10:50 AM
Quote

Similar Messages

Can we use same data definition with multiple concurrent programs?

Hi,
My requirement is as below:
I have two concurrent programs (say CP1 and CP2), both concurrent programs need to use same data definition (the same data template xml file) and same RTF layout template. However when registering data definition in the E-Biz, the data definition code must match concurrent program, hence I have to create two definitions (for the same data template xml file) and because layout template is attached with data definition I have to duplicate the layout definition also.
In summary, i have to create two (duplicate) Data Definition and Layout Template for the same dataTemplate.xml and Layout.rtf files. Is there any way to avoid this duplication?
The only issue with duplication is any change in xml or rtf needs to be updated in all the four definitions (2 data definitions and 2 layout definitions).
Thanks
Bhavik

I found the resolution and thought of sharing
you can see this post
*[How to use same data definition/template between multiple concurrent programs? |http://techatwork.wordpress.com/2009/08/06/how-to-use-same-data-definitiontemplate-between-multiple-concurrent-programs/]*
Thanks
Bhavik

Mappings with multiple sites

I have several sites on the same server. I want to be able to
use mappings independently for each site. How is this accomplished
with CF?
For Example:
I have 2 sites that use /includes/header.cfm to include a
template. Right now both are trying to use the same template in
d:\sites\intranet. I need to have each site use the path for it's
own folder.

I have several sites on the same server. I want to be able to
use
mappings independently for each site. How is this
accomplished with CF?
For Example:
I have 2 sites that use /includes/header.cfm to include a
template.
Right now both are trying to use the same template in
d:\sites\intranet.
I need to have each site use the path for it's own folder.
You can't in a single instance of ColdFusion, each mapping
would need a
different identifier. If you have ColdFusion Enterprise and
have
configured it in the multi-home configuration, then you can
have
different instances of CF running and each instance can have
it's own
mapping settings.
But with the standard CF or Enterprise configured in stand
alone
configuration everything shares the same settings.

Split in Mapping Program

Hai,
is it possible to use different Mapping programs in one process? For example I use Idoctype ACC_GL_POSTING01 to book some values from 3rd party into R3.
So now I have to make a different mapping in according to the booking code coming from 3rd party.
So what you guys think is the best way to solute this?
Because I don't want to make large If-statements in one mapping program - if their is any better way!
THX Matt
Message was edited by: Matthias Boettger

Hi Matthias,
sure:)
you can insert a switch step
(which will take into consideration the bookig code)
and on the basis of this create branches with different interface mappings (so different mapping programs)
but you have to do it in BPM (integration process)
Regards,
michal
Message was edited by: Michal Krawczyk

Multiple Mapping in XI 3.0

Hi All,
Any body tell that "HOW TO CREATE MULTIPLE MAPPINGS IN USING XI3.0"
If you have any step by step procedure please provide me.
Thanks & Regards
Venkata

Hi,
There are "multi-mapping" and "executing multiple mapping programs". Do not know which you are referring.
The above reply refers to multi-mapping. But, if you want to execute multiple mapping programs, you can develop each mapping program by itself, using Message Mapping, XSLT, java or ABAP. Then, in Interface Mapping, you can assign those mapping programs in the order they should be executed. The output of the 1st will be used as input to the 2nd, and so on.
Regards,
Bill

Identification of Mapping program at runtime

Hi,
I have a requirement in which based upon the value in a particular field I need to call the different mapping program.
I already have the different scenrios with these mapping programs, now that if the value is "A", it needs to call the mapping program "A" in scenario "A" if not it should another mapping program.
Option 1:
For this should I create another interface to check the value and route into different interface or
Option 2:
Is there anyother way, to check for that value and if value is "A" then route to the entire file as such a target directory "A" from where I can execute the scenario "A" or to anyother directory.
Regards,
Nithiyanandam

HI Nithiyanandam A.U.,
You need to do this with the help of XPATH expressions in Receiver determination to divart to various interfaces based on the vlaues.
Either you could use apply the mapping in BPM with the preffered condinal logics. (Prformance problem.!!!!)
If the sturctures are different then it will not be possible.
thanks
Swarup
Edited by: Swarup Sawant on Feb 15, 2008 8:44 AM

Getting directions with blackberry map application doesn't work

i merely want to get the written directions but once i type in my to and from locations, and fastest route and it goes to give me the directions, i can't scroll thru the directions. it posts on the screen the to and from addresses on the screen together and i can see the top of what would be the first line of the turn by turn directions. when i scroll i can see some action but it is below the edge of the screen. i can never see anything but the top edge of the first line of the directions. hard to explain. but bottom line is i can't see the directions.
i think this is a bug. any thoughts?
unitl i can figure out a way out of this prob, can someone recommend a better app where i can just get directions? i don't need live maps, just directions.
thanks in advance.

Got an e-mail back from Blackberry. Bottom line: they now know they have a problem with the maps program and they don't have a fix for it and no commitment to make it happen anytime soon (or ever). In the meantime I downloaded a maps program from Google that works although it won't directly access my contacts for addresses. I have to copy and paste to use the contacts info.

Mapping in Services Interface with multiple operation... ?

Hi ALL,
I have a SOAP to SOAP scenario here Just PI 7.1 with EHP1 acting a bus no mapping nothing .
1) I have the WSDL file from the receiver system with multiple synchronous operations in it ..i imported the wsdl as External Definition .. i used the same the WSDL file to create the sender Service interface also...
when i created the service interface with the operation in it , i just gave the same operation name from the WSDL.this i followed for the sender and receiver service interface.
1)now the issue is do i need any operation mapping if the service interface has more than one operation ...?
2) I compelted the scenario without any operation mapping ..but i am getting this error ..Problem occurred in receiver agreement for sender -ICRM_D to receiver -EXACTTGETWEBSERVICE_D,http://ICRMtoExactTaetWebservice.com.si_os_ICRM_EXACTTETWEBSERVICE: No standard agreement found for , ICRM_D, , EXACTTARGEBSERVICE_D, http://ICRMtoExactarebservice.com, si_os_ICRM_EXACGETWEBSERVICE..?
pls help me in this issue..
Thanks
Souz

you might want to read this /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype
you will need to create additional configurations for multiple operations to be supported

IDoc - IDoc interfacing with multiple mappings

Hi,
We want to use two different mappings for the same IDoc interface (based on a condition). So we use the ORDERS idoc for a sales scenario and also for a purchase scenario. The sending service is the same for both ORDERS messages, lets call it service SEND. Furthermore, for both ORDERS messages, the receiving service is also the same lets call it RECV.
The problem is that we want to use a different mapping for the ORDERS sales scenario as for the ORDERS purchase scenario. The sending and receiving interface in both cases is the same.
The receiver determination and interface/mapping determination is a problem in this case.
One way to solve this is to use a party, but in the configuration of the party you can only use the same sending logical system name ONCE. So party A cannot have the same logical system name (SEND) as party B (SEND) for scheme ALE#LS.
Another way would be to use different services, one for the first scenario and mapping and one for the second. Again the problem is that you need to enter adapter settings for both services (RECV1 and RECV2), but a logical system name can only be used in ONE service. If you want to assgin it to a second service, this is not allowed.
Does anybody have a solution for this?
thanks !

Hi Alexander,
why don't you try doing it in one BPM?
something like this:
one sender
one receiver
2 mapping programs
Receive step -> Swich Step - if PO go to Transformation step one (mapping 1), else go to Transformation step two (mapping for the SO) - Send Step?
you can base you swith step on E1EDK14 segment qualifier = 013
(As far as I remamber only Purches orders have it)
but check it:)
BTW
if you use the Swith Step you probably want to use a Transformation step before the Swith step (mapping from ORDERS to dummy message with one TAG - indication if this is PO or SO based on content of the ORDERS) this way the swich step will work for sure
Regards,
michal
Message was edited by: Michal Krawczyk

LSMW program to upload the sales order with multiple line items.

Dear SD and PP Gurus,
I am new to creating LSMW Program.
I want to create a LSMW program to upload the sales order with multiple line items. I have read on SDN that it can be done on two phases. First Create Header Data than line items. IS IT TRUE??, Or
Is there any procedure by which we can load the sales orders with multiple line items in a single run (part).
I want to use Batch process, not a BAPI or IDOC procedure.
I have created a program with
object 0090
Method 0000
Program Name RVINVB10
Program Type D
Source Structure 1 - For Header and Source Structure 2 for Line Items.
Mapped Field INDET (With Fix Value 1), ORDERTYPE, SALESORG, DISTCHANNEL, DIVISION, CUSTOMER, PONUMBER , DELVDATE, PRCGDATE, PMTTERM
INCOT1 INCOT2 with Source Structure - 1 and
Field INDENT (With Fix Value 2), ITEMNO, MATCODE, MATQTY, SUOM, PLANT, BATCH, AMOUNT with Structure-2
than maintained Structure relation ship, field Mapping, Specified Files, Assigned files, Read Data and other process,
At final stage (Start Direct Input program RVINVB10) it is giving a message - Table name not allowed.
Please tell me where I am wrong.
Thanks in advance.
DSC

Dear SD Gurus n Experts,
I have solved the above problem. But there is another problem appearing regarding the date format. Now system generating a message: Date . . is not valid.
While I am using Date: YYYYMMDD format in flat file, which is SAP's Standard Format.
In SDN Link: LSMW upload Sales Order using VA01/VA02 I have found that there are some date fields which are mandatory to filled. Here I have mapped
VDATU - Requested delivery date, BSTDK - Customer purchase order date, PRSDT - Date for pricing and exchange rate, BSTDK_E - Ship-to party's PO date, FKDAT - Billing Date, KORDT - Delivery Date,
and PRGRS - Date type is Constant = D
Can any one tell me, where is the priblem.
With thanks,
DSC

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Mapping from File to IDoc with multiple Idocs and multiple line items?

Hi All,
Need some help with mapping, requirement as below: I have a flat file with multiple records, need to create multiple idocs per each separate order in flat file with as many line items.
Order_1 field-1 field-2 field-3 field-4
Order_1 field-1 field-2 field-3 field-4
Order_2 field-1 field-2 field-3 field-4
Order_2 field-1 field-2 field-3 field-4
Order_3 field-1 field-2 field-3 field-4
Order_3 field-1 field-2 field-3 field-4
I have imported IDoc changed to 1:Unbounded, able to create multiple Idocs based on separate order from flat file.
Order_No - removeContexts - splitByValue(ValueChanged) - collapseContexts - exists - creatIf - IDOC
Now I am having hard time creating a line item segment E1EDP01. I want to have Idoc created below way:
IDoc-1 (Order_1)
E1EDP01
E1EDP01
IDoc-2 (Order_2)
E1EDP01
E1EDP01
IDoc-3 (Order_3)
E1EDP01
E1EDP01
I am getting multiple IDocs created. Please help me to create mutlieple line items under each Idoc. Please be speficic about the node funtions to be used, because I tried many times with different combinations, didn't work.
Regards,
N@v!n

Hi Navin,
Create your source structure like below
<Order>1 to unbounded
 <Order_No>
 <field1>
 <field2>
 <field3>
 <field4>
</oder>
to create mutiple IDocs based on order number,use below logic
Order_No-->removecontexts--->sort--->splitbyvalue(Valuechange)--->collapsecontext-->Idoc
use below logic for E1EDPO1,
Order----->removecontexts------>
 formatByexample------>E1EDP01
Order_No-->removecontexts--->sort--->splitbyvalue(Valuechange)-------->
try above logic and let me know if you any issues.
Regards,
Raj

Issue with multiple attachments in email program

Hi All,
i need one program which sends 3 excel sheets as an atatchments. in these attachments data should be separated by tab. i am not able to find suitable program for the requirement anybody can send me the code .
thanks,
maheedhar

hi,
Refer to this link...
send mail with multiple excel attachments
Cancatenate fields of internal table CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB to get the tab position between the fields.

Operation mappings with multiple mapping programs

Similar Messages

Maybe you are looking for