Operations manager console shows old alerts

Hi All,
I Have this issue regularly, I am using SCOM 2007 R2 CU4. But recently this issue has become very frequent.  I see more number of old alerts rather than new alerts in my SCOM console. Below is a screen shot. Is there any specific reason for this ? If
yes, How can i overcome this issue.
I checked the Health of the databases (Both Opsmanager & Ops manager warehouse database). Both are healthy they have 0 consistency errors in them. And have enough free space in them.
Below is the SQL Query what is used to check them.
For OpsmanagerDB - 
DBCC CHECKDB ('Operationsmanager')
For Ops manager Data warehouse:
DBCC CHECKDB ('OperationsmanagerDW')
Ops db has 16GB Free from total of 40GB.
Warehouse DB: 56GB Free from total size of 180GB.
Gautam.75801

Hi There,
My services are Running and up. Post analysing the event logs i found that the below event is frequent on my RMS Pointing towards few of my agents and The events are also on the name of my RMS
20022
The description for Event ID 20022 from source OpsMgr Connector cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
{E6B56BC0-A270-9E8D-2738-B7238757EB67}
My SCOM Agent name
MY Management group name
{95515F4D-7E15-9FAB-5D07-E434220E5F57}
The handle is invalid
==========================
Also lot of 2115 Event logs
=======================
Also lots and lots of 29103 & 29102 Information events
The description for Event ID 29103 from source OpsMgr Config Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
My SCOM Agent name
57 35 29 C1 F3 42 12 96 AF BA 4C 84 01 4D 49 2D E2 C5 60 D2 
{7a7af7a4-602c-ad7d-7d36-949bd187500a}
The handle is invalid
===================================
Event id 8000 on RMS Name its self
The description for Event ID 8000 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
CINSCOM
Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData
MY RMS FQDN
{6C3444C3-3990-BB5A-F25E-289D8F427570}
34
The handle is invalid
======================================
Event id 31551 
The description for Event ID 31551 from source Health Service Modules cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
My management group name
Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange
MY RMS FQDN
{6C3444C3-3990-BB5A-F25E-289D8F427570}
InvalidOperationException
Cannot access destination table 'State.StateStage'.
The handle is invalid
======================================
Event id 5304 
The description for Event ID 5304 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
95515f4d-7e15-9fab-5d07-e434220e5f57
My management group name
The handle is invalid
====================================================
Event id 5302 
The description for Event ID 5302 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
95515f4d-7e15-9fab-5d07-e434220e5f57
My management group name
The handle is invalid
====================================
Event id 5500 
The description for Event ID 5500 from source HealthService cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: 
{95515F4D-7E15-9FAB-5D07-E434220E5F57}
72E278FE-075C-BB33-1FF4-1F5F22988F8D
5F1924C9-F4B2-BAA6-7D50-FFDC523D99BB
2014-11-21T07:57:33.0664640-05:00
2014-11-21T10:36:34.1361505-05:00
Success
Success
My SCOM Management group
My scom Agent name
The handle is invalid
===========================================================
Strange thing is that all the Above events different but the descriptions are pointing towards healthservie. Does any one have any idea what is going on in the RMS?
Gautam.75801

Similar Messages

  • Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

    Hi Community,
    I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment,  we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
    VMware machine running Windows Server 2008R2.
    The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
    ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
    Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
    Configuration
    Supported?
    Agent-less monitoring
    No
    After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
    each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
    but it didn't matter how many times I try the servers never show up.
    I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
    --> http://technet.microsoft.com/en-us/library/hh212853.aspx
    I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
    the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
    went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
    of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
    I went to the Event Viewer and I found one particular event that caught my attention, see below :
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          6/12/2014 12:48:19 PM
    Event ID:      11551
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      MyManagementServer
    Description:
    Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">11551</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
        <EventRecordID>1945680</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>MyManagementServer</Computer>
        <Security />
      </System>
      <EventData>
        <Data>MyManagementServe</Data>
        <Data>0x800706BA</Data>
        <Data>The RPC server is unavailable.</Data>
      </EventData>
    </Event>
    Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
    Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
    There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
    My main goal is to have all the servers showing up in the Operations Manager Console.
    So thanks all in advance !
    Oscar Loria

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • [Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

    If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
    been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
    1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
    The request failed with HTTP status 404: Not Found.
    (!) SRS not detected as running
    Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
    Figure 1
    From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
    Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
    Figure 2
    2. Open the Console log file, it also shows some valuable information.
    instance of __ExtendedStatus
                    Operation = "ExecQuery";
                    ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                    ProviderName = "WinMgmt";
    \r\n
    [1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
    [52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
    Figure 3
    It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
    file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
    Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
    SELECT
    name,
    value2
    FROM dbo.SC_SysResUse_Property
    where name
    ='ReportServerUri'
    or name=
    'ReportManagerUri'
    Remarks:
    This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
    is to reinstall your Reporting Service Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
    http://www.enhansoft.com/

  • It's reasonable to start Operations Manager Console always with /ClearCache option?

    In the last month, sometimes i've the problem, that the operations manager console can't find objects; shows some alerts as acitve alerts, but they're closed.
    It could be solved by using the ClearCache argument, when i starts the console.
    It's reasonable to start the console always with ClearCache option? --or i've have some handicaps, when i do so?
    Thank you,
    Kind regards
    Wolfgang Winter

    Hi,
    Here is a discussion about this topic, please also go through it:
    console /ClearCache
    http://social.technet.microsoft.com/Forums/en-US/400a1856-bc9e-4cd1-879d-76c56b8dee88/console-clearcache?forum=operationsmanagergeneral
    Regards,
    Yan Li
    Regards, Yan Li

  • Please help: After removed a connector (nagios-connector) there is an error at the operations Manager Console

    Hello,
    after installing the nagios connecor and it doesn'work, i  try to remove it; with the powershell command remove-SCOMConnector. After removing it, Get-SCOMConnector shows me, that it doesn't exist:
    PS D:\> Get-SCOMConnector
    Name        : Network Monitoring Internal Connector
    DisplayName : Connector for populating network devices.
    Description :
    Initialized : False
    Name        :
    DisplayName :
    Description :
    Initialized : True
    Name        : SMASH Discovery Internal Connector
    DisplayName : Connector for populating SMASH devices.
    Description :
    Initialized : False
    Name        : Operations Manager Internal Connector
    DisplayName : A connector used by Operations Manager components to insert discovery data, please create your own connec
                  tor do not use this connector.
    Description :
    Initialized : False
    But when i take a look to the connectors in Operations Manager Console, it hangs, after a while i have this error:
    Date: 27.05.2014 10:04:43
    Application: Operations Manager
    Application Version: 7.1.10226.0
    Severity: Error
    Message: 
    System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.EnterpriseManagement.ConnectorFramework.EnterpriseManagementConnector.Reconnect(EnterpriseManagementGroup managementGroup)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.GetUpdate(IndexTable indexTable, QueryUpdate`1 update, CacheCursor cursor, Range range, Int32 offset, Int32 groupLevel)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(IndexTable indexTable, QueryUpdate`1 update)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(CacheSession session, Boolean fullUpdate)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.FireUpdateEvent(CacheSession session, DateTime updateTime, Boolean dataChanged, Boolean fullUpdate, Boolean updatesOnly, IEnumerable queryResult)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.FireUpdateEvents(CacheSession session, Boolean dataChanged, Boolean fullUpdate, ICollection`1 queryResult)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.PostQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType, Boolean dataChanged, DateTime queryTime, ICollection`1 queryResult)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalSyncQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalQuery(CacheSession session, UpdateReason reason)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.TryDoQuery(UpdateReason reason, CacheSession session)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
    Can somebody help me fixing this error?
    Strange.. the powerShell Command "get-SCOMConnector" works.. but the console hangs (on loading) when i want to show the connectors...
    Kind regards
    Wolfgang

    Hi,
    I agree, we may need to remove the connector from OpsDB. In addition, here is blog regarding to the similar issue, hope it helps:
    Error: “Object reference not set to an Instance of an Object” System Center Operation Manager 2012 Connector.
    http://blogs.technet.com/b/birojitn/archive/2012/07/07/error-object-reference-not-set-to-an-instance-of-an-object-system-center-operation-manager-2012-connector.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • After moving database, error on startup operations manager console

    Hello,
    may be someone can help me or give me a hint. I have moved the operational databas of SCOM 2012 to an other MSSQL-Server; from a SQL2008 Server to a SQL2012 Server.
    I used this document:
    http://technet.microsoft.com/en-us/library/hh278848.aspx
    After restarting the services i open the operations manager console, but it fails:
    Date: 28.08.2014 15:42:03
    Application: Operations Manager
    Application Version: 7.1.10226.0
    Severity: Error
    Message: Failed to connect to server 'name.foo.fodomain.de'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    --- End of inner exception stack trace ---
    Server stack trace:
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
    at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
    at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    --- End of inner exception stack trace ---
    at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
    at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
    at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
    at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://name.foo.fodomain.de:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0060373. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.177.9:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.177.9:5724
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    --- End of inner exception stack trace ---
    Server stack trace:
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
    at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
    at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
    at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.177.9:5724
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
    at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    My databaseadmin told me, that all is ok, the operations management server queries the new sql server, then close the connection. So we started again the old database server, there are still queries to this server.
    What i've done:
    - Changing the database servers name in the registry, Microsoft Operations Manager, 3.0, Setup, DatabaseServerName
    - changing the database entry at the file ConfigService.confg
    After my databaseadmin told me, that there are queries at the old database server, i searched in the registry and found two entries:
    - System Center
     Common
      Database
       DatabaseServerName
    - System Center Ooperations Manager
     12
      Reporting
       DWDBInstance
     .. i have still this error, no connection possible.
    What testing i can do?
    Kind regards
    Wolfgang

    You have to update the DB server names in the databases as well. Here are the instructions for SCOM07, I suspect it's similar in SCOM12
    Update the OperationsManager database with the New Database Server Name, and ensure that the account that you are logged on with has sufficient privileges on the SQL Server instance.
    Open SQL Server Management Studio.
    Expand
    Databases, OperationsManager, and Tables.
    Right-click
    dbo.MT_ManagementGroup, and then click Open Table if you are using SQL Server 2005 or click
    Edit Top 200 Rows if you are using SQL Server 2008.
    Change the value in the
    SQLServerName_6B1D1BE8_EBB4_B425_08DC_2385C5930B04 column to reflect the name of the new SQL Server-based computer.
    Save your change
    Configure the Operations Manager database with the name of the new Data Warehouse server as follows:
    On the server that hosts the Operations Manager database, open SQL Server
    Management Studio and navigate to Databases, OperationsManager, and then to
    Tables.
    Right-click
    dbo.MT_DataWarehouse, and then select Open Table if you are using SQL Server 2005 or select
    Edit Top 200 Rows if you are using SQL Server 2008.
    Change the value in the
    MainDatabaseServerName_16781F33_F72D_033C_1DF4_65A2AFF32CA3 column to the name of the new Data Warehouse server.
    Close SQL Server Management Studio to save your changes.
    "Fear disturbs your concentration"

  • Manage Devices shows old device names.

    I recently changed the names from my Computer (Windows 7, Service Pack 1), iPhone 4 and iPad 4. When I open iTunes 12.0.1.26 and go to accountinformation, I am able to see under manage devices my three devices. My computer (new name) iPad (still old name) iPhone (still old name). the name change from the computer has been adopted but my idevices still show the old names in brackets (). I removed them from the list via the remove button and added them in the iOS settings by switching the downloadbuttons for music and books to on but sadly no change. How do I manage that the manage devices register adopts the new names I have given these divices. Any help is appreciated.

    My new iPad isn't even listed in the devices in my iTunes account. It also isn't listed in the left pane under devices with my iPhone and iPod Touch. It also won't sync to my iMac unless it is physically tethered. When I go to the sync button in Settings>General>iTunes Wi-Fi Sync it says: Sync will resume when iMac is available. My iMac is ALWAYS available. hmmm. I also did not get the low battery (red indicator, 20% dismiss) button when my battery got down to 20%. Also in iBooks, I have nothing showing even though I have quite a few books in my iBooks Library. Curiouser and curiouser..... Other than that? No problems at all, LOL.

  • Operations Manager 2012 R2 Enterprise Alerting

    Hi,
    at the moment we plan the migration from SCOM 2007 R2 to SCOM 2012 R2.
    We are looking for an enterprise alerting solution like the product from DERDACK. Do you know of any other vendors / products with the same capabilities?
    Thank you,
    Martin

    There is Mass Notification System for enterprise Alert, and you can check below link
    http://www.cooperindustries.com/content/public/en/safety/notification/solutions/enterprise_alerting.products.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Get an error whe launching Operations Manager Console

    Hi Guys,
    Not sure what broke here but this morning I had no issues launching my SCOM powershell console. While I was working on a script it look to have broke. I opened up a new console and I got this:
    I have checked the a number of blog posts about this issue and nothing I found has been able to resolve this.
    What I have done is:
    Restarted Computer ;)
    Checked the shortcut and verify that the correct "Target" and "Start in" fields are correct.
    I have repaired the SCOM console install
    I have uninstalled and re installed the SCOM console and restarted the computer
    I have checked the system Environment Variables for Path and PSModulePath all look ok.
    Tried a system restore but it failed.
    Not sure what else to check.
    Cheers, Martin Blog: http://sustaslog.wordpress.com/ Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

    So I found out what had caused this issue. I have a module which loads on startup which adds additional PS commands from Sorlov.PowerShell
    After I had disabled this module from being loaded the SCOM shell was loading ok.
    Cheers,
    Martin
    Blog:
    http://sustaslog.wordpress.com 
    LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Operations Manager - KMS Idle Minutes Monitor Alerts - False Positives As Event ID 12290 Still Being Logged

    Hi all,
    I am using System Center 2012 R2 Operations Manager with the Key Management Service Management Pack at version 6.0.7234.0, and I keep receiving the following alert in Operations Manager:
    "Idle Minutes Monitor Alert:
    Key Management Service (KMS) inactivity exceeded threshold
    Knowledge:
    Summary:
    The purpose of this rule is to alert system administrators to a possible KMS or network outage. This rule monitors the end-to-end operation of KMS activation. A notification event is created by KMS if no activation or renewal requests were logged by KMS
    (activity event 12290) in the specified time interval. In addition to new activations, periodic renewal requests are expected to occur (default is 7 days). Whether or not this alert is serious depends on the number of machines in the KMS environment, how many
    are actually connected, and the configured renewal interval.
    Causes:
    Any failure or incorrect configuration of the KMS service, other Windows components, firewall, hardware, network or routers can trigger the Idle Minutes Alert. This alert can also result from normal behavior, since it is possible that not enough machines
    attempted to activate or renew during the specified time interval.
    Resolutions:
    The first step is to determine whether there really is a problem. Start with a known good KMS client and run (with elevated privileges) the script slmgr.vbs -ato . If the activation/renewal fails, it will report an error code. You can direct the client to
    connect to a specific KMS machine by using the slmgr.vbs -skms option. The request event (12288) and response event (12289) in the Windows Application event log may provide additional information, including the identity of failing KMS machines. If there has
    been a failure, check the following:
    Software Licensing service (slsvc) is running.
    Other KMS machine behavior is normal.
    KMS firewall port is open (default is TCP 1688).
    Attempt to connect to KMS using telnet to the KMS port(you won’t be able to do anything other than connect)
    Use a network monitor (e.g. netmon) to capture and trace network problems.
    There is one Idle Minutes Monitor that is used to monitor for activity. It may be desirable to adjust the time threshold, depending on expected KMS activity."
    Despite what the alert says, there are activity events with ID 12290 being logged, but they are appearing under the 'Key Management Service' log instead of the general 'Application' log.  I know that my clients are activating with the server without
    any problems as I have run slmgr.vbs -ato with success on a number of them, and none are stating that activation is required.  This issue was previously raised here:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/1391acf8-f0be-4a48-9039-8d24e275f1fd/kms-idle-time-monitor-raise-wrong-alerts?forum=operationsmanagermgmtpacks, but  I am running Windows Server 2008 R2 SP1 and the hotfix KB981314 comes
    up as 'not applicable to this computer' so I assume it is part of SP1 now.  I have also tried installing KB2692929, as that was cited as being a possible fix here:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/8ec8ae5b-a310-4b0f-9a5f-e0599bceb93a/kms-managementpack?forum=operationsmanagermgmtpacks, however I am still seeing the same alerts.
    Would greatly appreciate any further suggestions!
    Many thanks

    Hi,
    I've checked for all the events that are generated by our servers, and there are periods of time where no requests are received for up to 18 hours, so that is no doubt why the alerts are appearing (we then sometimes see five requests in the same minute,
    but there we go).  I'll need to adjust the thresholds.
    Thank you for your help, Chunky.1, I'll mark your reply as the answer, as it was very helpful in understanding the alert.
    For anyone else who needs to check this, create a PowerShell script using the following content, and place your own details into the relevant sections in bold (without the brackets, of course).  This will generate a csv file which will have the server
    name in one column and the time that the request event was generated - you can then check the gaps between the requests.  The script is quick and dirty, with no checks along the way, so feel free to embellish it as required.
    Out-File "<directory to place file in>\KMS_check_results.csv"
    $results = get-eventlog -ComputerName <KMS server hostname> -logname 'Key Management Service'|where{$_.message -match "<String which identifies servers instead of clients>"}
    $filteredresults = @()
    foreach($event in $results){
        #This splits up the message into sections, separated by commas, and places each section as an element in an array
        $event.Message -split ","|foreach{
            if($_ -match "<server domain suffix - e.g. contoso.com>"){
                $eventserver = $_
        $timegenerated = $event.TimeGenerated
        $filteredresults += New-Object PSObject -Property @{
            Server = $eventserver
            TimeGenerated = $timegenerated
    $filteredresults|select-object server,timegenerated|export-csv "<directory to place file in>\KMS_check_results.csv"  -NoTypeInformation

  • SAP management console not showing AS java

    Hello all,
    I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
    In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
    In the abap instance node I was able to see an entry for "AS java"  which was whowing two process (SDM and another one...).
    I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
    How can I get SAP management console show "AS java" ????
    Thank you
    Jean

    Hi Jean,
    Start Services.msc from run prompt (if this is windows based installation)
    and look for <SID>services, where <SID> is your instance name..
    Please do the following and let me know if this of any success
    You get back your MMC , please do the following steps.
    1. Go to Run and type MMC.
    2.Go to file and select add/remove snap in ( alt+m).
    3.Click on add
    4.Select the SAP system from there.
    Save the MMC console which you have created now....This should work fine.
    Thanks
    Pankaj

  • Management pack version difference in System Center - Operations Manager 2012 R2 - Help us.

    Hi,
    I have SC Operation manager 2012 r2 in my environment. It has managed with multiple management servers.
    I have import some unsealed MPs through Ops SDK code and by manually using Operation manager console.
    Here with i tried to install higher version of MPs and upgrade its version from 1.1.0.0 to 6.0.0.0.
    case 1:
    After successful installation of some MPs and check Operation manager console, it showing newly upgraded version(6.0.0.0).
    Then i have import that MP and checked its version inside it showing 1.1.0.0(older version).
    Here the imported MP has 1.1.0.0 version and console showing its version as 6.0.0.0.
    Why it showing different versions in imported MP(inside xml)  and Operations manager console view?
    case 2:
    After that i tried to import other MPs using console. But it showing below error;
    Verification failed with 1 errors:
    Error 1:
    Found error in 2|Monitoring.ActiveDirectory_server|6.0.0.0|Monitoring.ActiveDirectory_server|| with message:
    Could not load management pack [ID=Monitoring.Base, KeyToken=9e875220a3987e0b, Version=6.0.0.0]. The management pack was not found in the store.
    : Version mismatch. The management pack ([Monitoring.Base, 9e875220a3987e0b, 1.1.0.0]) requested from the database was version 6.0.0.0 but the actual version available is 1.1.0.0.
    Its happened in  multiple management servers scenario. So Is any possibility to happen because of multiple management servers scenario?. There is no issues in this same MPs while i tried in single management server. These same MPs are imported and working
    fine in single management server scenario.
    Help me to solve these 2 issues!!
    Thanks,
    satheesh

    1) At first, you should make sure that the imported MP has correct version. I will open the XML of the imported MP and check its current version e.g.
    When you open the xml file of imported MP, the version number is shown as
    <Manifest>
        <Identity>
            <ID>Microsoft.SystemCenter.Visualization.Component.Library.Resources</ID>
            <Version>1.0.0.2</Version>
        <Identity>
        <Name>Resources library</Name>
        <References>
            <Reference Alias="System">
            <ID>System.Library</ID>
            <Version>1.0.0.1</Version>
    From the above sample, the imported MP version number is 1.0.0.2.
    2) I am using operation console to import the management pack and check the version number in operations console whether it is updated to new version 1.0.0.2
    3) Using operations console to export the MP which has imported in step 1) and open it to check what is the version number of MP. Make sure that the version is 1.0.0.2
    4) If the above procedure provide a prefer match of version number, re-import all problematic MP.
    5) At last, you may use the following SQL to check whether the correct version number of MP is stored in DB successful
    select version, friendlyname from managementpackview where friendlyname like 'Microsoft.SystemCenter.Visualizatio%'
    Roger

  • Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"

    Hi All,
    I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
    http://www.microsoft.com/en-us/download/details.aspx?id=40844
    I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe  to
    rebuild the VHD file. I am using Windows Server 2012 Standard.
    As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
    to create the Virtual Machine to run Operations Manager. Problems:
    1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
    able to run anyway?
    2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
    Operations Manager Console folder. Operations Manager Console
    folder provides access to different parts of Operations Manager. Double-click
    Operations Console to open the Operations Manager console."
    so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
    Files" there is no System Center folder at all..?
    Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
    Thansk.
    W.

    Hi All,
    I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
    http://www.microsoft.com/en-us/download/details.aspx?id=40844
    I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe  to
    rebuild the VHD file. I am using Windows Server 2012 Standard.
    As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
    Problems:
    1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
    to run anyway?
    2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
    of the virtual machine, double-click the Operations Manager Console folder.
    Operations Manager Console folder
    provides access to different parts of Operations Manager. Double-click Operations Console to
    open the Operations Manager console." so I did click on the Operation Console
    icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
    folder at all..?
    Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
    Thansk.
    W.

  • Config Manager and Operations Manager on same server

    May be a simple question, but I have Systems Center Configuration Manager 2012 R2 setup on my Windows Server 2012 R2.  I have the SQL 2012 database running on the same server.  I'd like to install Operations Manager console/database on the same
    server.  Can these co-exist on the same machine/database?  I found the article from Microsoft (http://technet.microsoft.com/en-us/library/dn281928.aspx) that explicitly says:
    DPM Management Server
    Operations Manager Management Server
    Service Manager Management Server
    Service Manager Data Warehouse Management Server
    cannot co-exist on the same server, but it does not mention Configuration manager so I'm assuming its OK?  Does anyone know for sure?

    Hi,
    Sccm requires a separate sql instance, Cameron covers the topic here:http://blogs.catapultsystems.com/cfuller/archive/2012/05/23/system-center-2012%E2%80%93using-a-common-sql-backend-database-sysctr-scom-scsm.aspx
    From a performance and complexity perspective I would strongly advice you to avoid it.
    /Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • System Center Orchestrator connectivity with System Center Operations Manager

    Hi,
    I am trying to connect my SCORCH setup with my SCOM server. When I enter the SCOM Server Name or IP Address, Domain, USer id, and Password in the Connectivity Prompt of SCORCH, and click on TEST Connections, I see a red error prompt with the labl error
    and nothing written on it. the user id has rights on both SCORCH and SCOM environment.
    Is there a log file that I can refer to validate the exact error  that is happening when I connectin SCORCH with SCOM?
    Thanks
    Sandeep C
    Sandeep C Learn more about IT @ schadda.blogspot.com Please mark this post as helpful if it was helpful :) Also mark it as a proposed answer if it turns out to be the final solution

    Stefan is right.
    You need to install the OM Console
    "Install the Operations Manager console on each computer where an Orchestrator Runbook server or Runbook Designer is installed, if that server needs to interact with Operations
    Manager"
    Described here: http://technet.microsoft.com/en-us/library/hh830690

Maybe you are looking for

  • Problem in F-44. clearing of items.

    Hi Experts, I am getting the problem with some vendors  while executing the idoc it is not posting to some vendors. We are following this process for this. We are posting the invoices in Ecc 6.0 and sending this invoices to 4.6 c for payment for this

  • ITS URGENT QUES ON AT LINE-SELECTION AND AT USER-COMMAND

    ITS URGENT...WHEN I SELECT MULTIPUL VALUES IN BASIC LIST ,I HAVE TO GET THOSE SELECTED MULTIPUL VALUES IN SECONDARY LIST THAT CAN BE AFTER(AT LINE-SELECTION OR AT USER-COMMAND)............?

  • Safari Tab management

    Hello all. Thanks in advance for any thoughts you have. I'll be blunt. Is there any way to disable the new tab management in Safari? It used to be there was a pop-up menu list to the right if you had a lot, like with the bookmarks. I have a loooot of

  • What is the largest and fastest Hard Drive I can install in a 17" I-7 Mac Book Pro running Final Cut Pro7 7

    What is the Largest and Fastest Hard drive that can be installed in my 17" Mac Book Pro i7 duo core 2.8 I need it to be compatible with Final Cut Pro 7

  • System Preference Isn't What It Says It Is

    I hope someone can help me (using simple step by steps, please - I'm new here!). I have a folder of pictures for my desktop. This folder is in the picture folder. The pictures are supposed to change every 5 minutes, which they do. They are supposed t